Subversion Repositories Projects

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
761 5101 d 3 h /C-OSD/trunk/ *distance to home now 4 digits for long distance flights
*max height and speed shown again in stats
*clear full screen before stats shown so the art-horizon does not bug us
@some code formatting
 
758 5113 d 14 h cascade /C-OSD/trunk/ *fixed bug causing PPM-based display on/off to fail
*fixed display of AGRESSiVA-horizion during motor run
 
757 5119 d 17 h cascade /C-OSD/trunk/ *added mph/ft (two new chars added, reflash characters if you need ft/mph)
*AGRESSiVA-horizion now switchable via menu
*reworked menu a bit
*switched from -O2 to -Os because of the added stuff
 
753 5129 d 13 h cascade /C-OSD/trunk/ *RC-RSSI now shown if available (RC_Quality is still fallback, still needs FC patch)
+AGRESSiVA-horizion to main trunk (NEW_ARTHORIZON 1 to test, needs new chars)
+chars needed for above mod to chars.mcm and chars.c
 
738 5172 d 14 h cascade /C-OSD/trunk/ *hopefully fixed the laggy osd data problem
-send_data_mk has been striked out to save space
@nc-mode should be small enough for bootloader again ( Program: 14986 bytes (91.5% Full) )
 
736 5174 d 23 h cascade /C-OSD/trunk/ *some menu stuff
*stats in nc_default do not disturb the bigvario anymore
*reduced code size from 16088 bytes (98.2% Full) 15436 bytes (94.2% Full)
 
734 5176 d 20 h cascade /C-OSD/trunk/ +mah wasted per flight (still counts up after landing, but space gets tight)
*init phase from 2000ms to 3000ms
*init only takes place after first "valid" UBat is received (<4V should case the Mega to reset anyways)
 
728 5178 d 14 h cascade /C-OSD/trunk/ adapted MK-datastructs to NC 0.18c
added choice for current display measured by FC
 
685 5274 d 2 h cascade /C-OSD/trunk/ +fc-only mode by Josef "jopl" Plasil (MK3Mag on FC and no NC)
*usart1 routine to filter out unwanted datasets (also big thanks to jopl)
 
677 5280 d 15 h cascade /C-OSD/trunk/ +nc/fc software version display in bootup
*changed checkbytes because of previously removed EEPROM data
 
675 5283 d 15 h cascade /C-OSD/trunk/ *synced NaviStruct to NC Code v0.17e
(since nothing of the new stuff is used right now, older NC version will still work)
 
528 5391 d 17 h cascade /C-OSD/trunk/ *fixed the flags (hopefully) for C-Strom and stuff  
523 5399 d 18 h cascade /C-OSD/trunk/ *hopefully fixed the new 10th number showing functions
+support for GPS height instead of Baro
 
519 5403 d 14 h cascade /C-OSD/trunk/ *write-number-functions changed, using itoa now, saves space, should be faster
*inline added for basic max7456-spi_send because saves procedure call (^= time)
 
514 5409 d 0 h cascade /C-OSD/trunk/ *ALL characters now in Progmem, from now on there will be only ONE char-file!  
508 5423 d 17 h cascade /C-OSD/trunk/ *spi transfer now struct driven (needs C-Strom 20090612-2100 now!!!)
*lesser spi update rate (caused problems on some strom-slaves)
*voltage gets transfered via spi as well
*menu to switch display of 2nd voltage measured by C-Strom on and off
 
507 5423 d 17 h cascade /C-OSD/trunk/ *spi transfer now struct driven
*lesser spi update rate (caused problems on some strom-slaves)
*voltage gets transfered via spi as well
*menu to switch display of 2nd voltage measured by C-Strom on and off
 
499 5432 d 0 h cascade /C-OSD/trunk/ *bugfix for stats  
497 5432 d 1 h cascade /C-OSD/trunk/ *possible to choose between different osd-layouts (via menu)  
489 5433 d 18 h woggle /C-OSD/trunk/ more precise timer, move more data to PROGMEM, remove warnings  
478 5441 d 15 h cascade /C-OSD/trunk/ *damn dates...  
477 5441 d 15 h cascade /C-OSD/trunk/ +HUD on/off via RC (connect to PPM, according to manual) testing stuff  
474 5444 d 2 h cascade /C-OSD/trunk/ +pal/ntsc changable in menu (applied immedeately!)  
471 5447 d 15 h cascade /C-OSD/trunk/ *mah corrected
+config gets saved now (menu item!)
*source moved a bit
 
468 5448 d 13 h cascade /C-OSD/trunk/ +mah currently wasted
*some small changes
 
467 5449 d 14 h cascade /C-OSD/trunk/ *modded the real alpha stuff i have been talking about below  
465 5450 d 15 h cascade /C-OSD/trunk/ +some really testing stuff 'bout current measurement, more to come  
459 5453 d 14 h cascade /C-OSD/trunk/ *osd-layouts in seperate files so including own layouts should get easier
+build date is displayed during init to know which version you are runing
 
455 5454 d 4 h cascade /C-OSD/trunk/ *some code movement
+artificial horizon for FC-ONLY mode
 
454 5454 d 17 h cascade /C-OSD/trunk/ +some FCONLY basics (set FCONLY to 1 in main.h to use it)  
453 5455 d 15 h cascade /C-OSD/trunk/ *battery voltages now calculated according to CELL_VOLT_MIN CELL_VOLT_MAX and CELL_NUM
*CELL_NUM -1 causes a rough auto detection of cell number
-UBAT_WRN and UBAT_MAX are now deprecated
 
412 5469 d 15 h cascade /C-OSD/trunk/ +write_gps_pos(...) (needs to be tested)
+gps position is shown in stats screen for testing purpose
 
410 5469 d 17 h shaddi /C-OSD/trunk/ *stats are only collected while engines running  
409 5469 d 17 h shaddi /C-OSD/trunk/ #Dont forget the CHANGE.LOG :)  
407 5469 d 17 h cascade /C-OSD/trunk/ *clear() now faster
*stats are only shown AFTER flight (more specific, after motors had been on at least once)
+indication icon for serial link (requires new character 198)
+indication icon for manual controll (stick > stick threshold)
(Character set 192 needs to be reflashed since new icon is in it)
 
389 5477 d 12 h cascade /C-OSD/trunk/ *reset-bug fixed
*moved code a bit
 
387 5477 d 17 h cascade /C-OSD/trunk/ *reset-bug workaround in usart1.c: usart1_DisableTXD and usart1_EnableTXD  
386 5477 d 19 h cascade /C-OSD/trunk/ *fixed bug in heading-fine conv for bearing to home  
385 5478 d 1 h cascade /C-OSD/trunk/ *compass characters bigger
*battery position
+voltage-symbol to battery-voltage
(Character Set 208 needs to be reflashed since compass chars are in it)
 
383 5478 d 18 h cascade /C-OSD/trunk/ *fixed bug in Character Set 128 (reflash it if you already flashed it!)
+another set of vario chars
*changed vario to use new characters
*moved vario/home-bearing positions
*big vario now enabled via menu or BIGVARIO
(Character Set 112 needs to be flashed)