Subversion Repositories BL-Ctrl

Rev

Go to most recent revision | Show changed files | Directory listing | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
117 4411 d 8 h ingob /  
116 4431 d 16 h /branches/V0.41-Hexa/  
115 4556 d 14 h holgerb /BL-Ctrl_2.0/V0.31b/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB

Changes:
0.30a 2010.09.02 H.Buss
- avoids reported short power-loss

0.31a 2010.10.20 H.Buss
- higher accuracy of temperature measurement > 100°C
- slower power-down in case of overheat

0.31b
- modifications for the 2.0c-Hardware (thicker current-messurement-shunt)		  
114 4556 d 14 h holgerb /BL-Ctrl_2.0/V0.31/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB

Changes:
0.30a 2010.09.02 H.Buss
- avoids reported short power-loss

0.31a 2010.10.20 H.Buss
- higher accuracy of temperature measurement > 100°C
- slower power-down in case of overheat

0.31b
- modifications for the 2.0c-Hardware (thicker current-messurement-shunt)		  
113 4572 d 10 h /branches/  
112 4756 d 7 h /branches/  
111 4864 d 15 h holgerb /BL-Ctrl_2.0/V0.31/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB

Changes:
0.30a 2010.09.02 H.Buss
- avoids reported short power-loss

0.31a 2010.10.20 H.Buss
- higher accuracy of temperature measurement > 100°C
- slower power-down in case of overheat		  
110 4927 d 13 h ingob /tags/V0.42/Hex-Files/BL-Ctrl_V1_1_and_V1_2/ deleted old files  
109 4927 d 13 h ingob /tags/V0.42/Hex-Files/BL-Ctrl_V1_1_and_V1_2/ typo in filename fixed  
108 4982 d 10 h holgerb /BL-Ctrl_2.0/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB

Changes:
0.30a 2010.09.02 H.Buss
- avoids reported short power-loss
- no selftest if powered via MKUSB		  
107 4982 d 10 h holgerb /BL-Ctrl_2.0/V0.30/ 0.30a 2010.09.02 H.Buss
- avoids short power-loss
- no selftest if powered via MKUSB		  
106 4998 d 10 h holgerb /BL-Ctrl_2.0/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB		  
105 4998 d 10 h holgerb /BL-Ctrl_2.0/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB		  
104 4998 d 11 h ingob /BL-Ctrl_2.0/  
103 5053 d 17 h /branches/  
102 5053 d 18 h /branches/V0.37_PA/  
101 5054 d 8 h /branches/V0.37_PA/  
100 5054 d 9 h /branches/V0.37_PA/ Optimierungsversuch der Phasensteuerung
Autor: valbas		  
99 5108 d 11 h ingob /  
98 /  
97 /  
96 /  
95 5306 d 15 h ingob /tags/V0.42/  
94 /  
93 5306 d 15 h ingob /  
92 5306 d 15 h ingob /  
91 5452 d 14 h ligi /branches/V0.42_addr9-12_fix_ligi/ fixes for addr 9-12 ( Delay at startup and Addr output on console )  
90 5497 d 5 h hbuss /tags/V0.42/ V0.42 05.04.2009 - HB
BL-Adressen 5-8 und 9-12 eingefügt		  
89 /  
88 5604 d 8 h pangu /branches/V0.41-Hexa/Hexfiles/ renamed, so it can be flashed with new KopterTool  
87 5742 d 5 h ingob /tags/V0.41/Hex-Files/BL-Ctrl_V1_1_and_V1_2/ Im Projektarchiv umbenannt  
86 5742 d 5 h ingob /tags/V0.41/Hex-Files/BL-Ctrl_V1_1_and_V1_2/ Im Projektarchiv umbenannt  
85 5756 d 18 h pangu /branches/V0.41-Hexa/Hexfiles/ rename versions, add HEx for ESC 1-4  
84 5757 d 0 h pangu /branches/V0.41-Hexa/Hexfiles/ Hexfiles for ESC #5 and #6  
83 5757 d 0 h pangu /branches/V0.41-Hexa/ These were the wrong HexFiles, I'll compile some on Request.  
82 5757 d 4 h pangu /branches/V0.41-Hexa/ let the BSC initialize pairwise: 1+2,3+4,5+6
so they do not beep clockwise within 6, but pairwise within 3 seconds		  
81 5798 d 8 h pangu /branches/V0.41-Hexa/ und hier kommen auch die Modifikationen :)  
80 5798 d 8 h pangu /branches/V0.41-Hexa/ Modifikationen für 6 Motoren und Fix für WinAVR-20071221 von Pangu  
79 /  
78 5874 d 2 h hbuss /tags/V0.41/ V0.41 22.03.2008 - HB
Version auch für Platinen V1.2
Überstromerkennung (Phasenkurzschluss) beim Anwerfen des Motors -> Blinkt 10 mal bei Überstrom in der Startphase
Das Makefile erzeugt jetzt die richtigen HexFile-Namen