Subversion Repositories BL-Ctrl

Rev

Go to most recent revision | Hide changed files | Directory listing | RSS feed

Filtering Options

Rev Age Author Path Log message Diff Changes
117 4418 d 15 h ingob /  
/LICENSE.TXT
116 4438 d 23 h /branches/V0.41-Hexa/  
/branches/V0.41-Hexa/BLMC.lst
/branches/V0.41-Hexa/BrushLess-Ctrl_V0_41_10A.eep
/branches/V0.41-Hexa/BrushLess-Ctrl_V0_41_10A.elf
/branches/V0.41-Hexa/BrushLess-Ctrl_V0_41_10A.hex
/branches/V0.41-Hexa/BrushLess-Ctrl_V0_41_10A.lss
/branches/V0.41-Hexa/BrushLess-Ctrl_V0_41_10A.sym
/branches/V0.41-Hexa/PPM_Decode.lst
/branches/V0.41-Hexa/analog.lst
/branches/V0.41-Hexa/edit
/branches/V0.41-Hexa/edit/edit
/branches/V0.41-Hexa/edit/edit.sln
/branches/V0.41-Hexa/edit/edit/edit.vcproj
/branches/V0.41-Hexa/main.lst
/branches/V0.41-Hexa/timer0.lst
/branches/V0.41-Hexa/twislave.lst
/branches/V0.41-Hexa/uart.lst
/branches/V0.41-Hexa/main.c
115 4563 d 21 h holgerb /BL-Ctrl_2.0/V0.31b/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB

Changes:
0.30a 2010.09.02 H.Buss
- avoids reported short power-loss

0.31a 2010.10.20 H.Buss
- higher accuracy of temperature measurement > 100°C
- slower power-down in case of overheat

0.31b
- modifications for the 2.0c-Hardware (thicker current-messurement-shunt)		  
/BL-Ctrl_2.0/V0.31b
114 4563 d 21 h holgerb /BL-Ctrl_2.0/V0.31/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB

Changes:
0.30a 2010.09.02 H.Buss
- avoids reported short power-loss

0.31a 2010.10.20 H.Buss
- higher accuracy of temperature measurement > 100°C
- slower power-down in case of overheat

0.31b
- modifications for the 2.0c-Hardware (thicker current-messurement-shunt)		  
/BL-Ctrl_2.0/V0.31/BL-Ctrl_MEGA168_V0_31b.hex
/BL-Ctrl_2.0/V0.31/BL-Ctrl_MEGA168_V0_31b_ADR9-12.hex
/BL-Ctrl_2.0/V0.31/BL-Ctrl_MEGA168_V0_31a.hex
/BL-Ctrl_2.0/V0.31/BL-Ctrl_MEGA168_V0_31a_ADR9-12.hex
113 4579 d 18 h /branches/  
/branches/conf
/branches/db
/branches/format
/branches/hooks
/branches/locks
112 4763 d 14 h /branches/  
/branches/README.txt
/branches/conf
/branches/conf/authz
/branches/conf/passwd
/branches/conf/svnserve.conf
/branches/db
/branches/db/current
/branches/db/format
/branches/db/fs-type
/branches/db/fsfs.conf
/branches/db/min-unpacked-rev
/branches/db/revprops
/branches/db/revprops/0
/branches/db/revprops/0/0
/branches/db/revs
/branches/db/revs/0
/branches/db/revs/0/0
/branches/db/transactions
/branches/db/txn-current
/branches/db/txn-current-lock
/branches/db/txn-protorevs
/branches/db/uuid
/branches/db/write-lock
/branches/format
/branches/hooks
/branches/hooks/post-commit.tmpl
/branches/hooks/post-lock.tmpl
/branches/hooks/post-revprop-change.tmpl
/branches/hooks/post-unlock.tmpl
/branches/hooks/pre-commit.tmpl
/branches/hooks/pre-lock.tmpl
/branches/hooks/pre-revprop-change.tmpl
/branches/hooks/pre-unlock.tmpl
/branches/hooks/start-commit.tmpl
/branches/locks
/branches/locks/db-logs.lock
/branches/locks/db.lock
111 4871 d 22 h holgerb /BL-Ctrl_2.0/V0.31/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB

Changes:
0.30a 2010.09.02 H.Buss
- avoids reported short power-loss

0.31a 2010.10.20 H.Buss
- higher accuracy of temperature measurement > 100°C
- slower power-down in case of overheat		  
/BL-Ctrl_2.0/V0.31
/BL-Ctrl_2.0/V0.31/BL-Ctrl_MEGA168_V0_31a.hex
/BL-Ctrl_2.0/V0.31/BL-Ctrl_MEGA168_V0_31a_ADR9-12.hex
/BL-Ctrl_2.0/V0.31/BL_2_0.txt
110 4934 d 20 h ingob /tags/V0.42/Hex-Files/BL-Ctrl_V1_1_and_V1_2/ deleted old files  
/tags/V0.42/Hex-Files/BL-Ctrl_V1_1_and_V1_2/BrushLess-Ctrlr_MEGA8_V0_42_10A.hex
/tags/V0.42/Hex-Files/BL-Ctrl_V1_1_and_V1_2/BrushLess-Ctrlr_MEGA8_V0_42_10A_ADR5-8.hex
/tags/V0.42/Hex-Files/BL-Ctrl_V1_1_and_V1_2/BrushLess-Ctrlr_MEGA8_V0_42_10A_ADR8-12.hex
109 4934 d 20 h ingob /tags/V0.42/Hex-Files/BL-Ctrl_V1_1_and_V1_2/ typo in filename fixed  
/tags/V0.42/Hex-Files/BL-Ctrl_V1_1_and_V1_2/BrushLess-Ctrl_MEGA8_V0_42_10A.hex
/tags/V0.42/Hex-Files/BL-Ctrl_V1_1_and_V1_2/BrushLess-Ctrl_MEGA8_V0_42_10A_ADR5-8.hex
/tags/V0.42/Hex-Files/BL-Ctrl_V1_1_and_V1_2/BrushLess-Ctrl_MEGA8_V0_42_10A_ADR8-12.hex
108 4989 d 17 h holgerb /BL-Ctrl_2.0/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB

Changes:
0.30a 2010.09.02 H.Buss
- avoids reported short power-loss
- no selftest if powered via MKUSB		  
/BL-Ctrl_2.0/V0.30/BL-Ctrl_MEGA168_V0_30a.hex
/BL-Ctrl_2.0/V0.30/BL-Ctrl_MEGA168_V0_30a_ADR9-12.hex
/BL-Ctrl_2.0/V0.30/BL_2_0.txt
/BL-Ctrl_2.0/V0.28
107 4989 d 17 h holgerb /BL-Ctrl_2.0/V0.30/ 0.30a 2010.09.02 H.Buss
- avoids short power-loss
- no selftest if powered via MKUSB		  
/BL-Ctrl_2.0/V0.30
106 5005 d 18 h holgerb /BL-Ctrl_2.0/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB		  
/BL-Ctrl_2.0/V0.28
/BL-Ctrl_2.0/V0.28/BL-Ctrl_MEGA168_V0_28.hex
/BL-Ctrl_2.0/V0.28/BL-Ctrl_MEGA168_V0_28_ADR9-12.hex
/BL-Ctrl_2.0/V0.28/Note.txt
/BL-Ctrl_2.0/BL-Ctrl_MEGA168_V0_28.hex
/BL-Ctrl_2.0/BL-Ctrl_MEGA168_V0_28_ADR9-12.hex
/BL-Ctrl_2.0/Note.txt
105 5005 d 18 h holgerb /BL-Ctrl_2.0/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB		  
/BL-Ctrl_2.0/BL-Ctrl_MEGA168_V0_28.hex
/BL-Ctrl_2.0/BL-Ctrl_MEGA168_V0_28_ADR9-12.hex
/BL-Ctrl_2.0/Note.txt
104 5005 d 18 h ingob /BL-Ctrl_2.0/  
/BL-Ctrl_2.0
103 5061 d 0 h /branches/  
/branches/V0.37_PA
102 5061 d 1 h /branches/V0.37_PA/  
/branches/V0.37_PA/BLMC.h
101 5061 d 15 h /branches/V0.37_PA/  
/branches/V0.37_PA/BLMC.h
100 5061 d 16 h /branches/V0.37_PA/ Optimierungsversuch der Phasensteuerung
Autor: valbas		  
/branches/V0.37_PA
99 5115 d 18 h ingob /  
/README.TXT
98 /  
97 /  
96 /  
95 5313 d 22 h ingob /tags/V0.42/  
/tags/V0.42/BLMC.h
94 /  
93 5313 d 22 h ingob /  
/README.TXT
92 5313 d 22 h ingob /  
/LICENSE.TXT
/tags/V0.31/BLMC.c
/tags/V0.31/PPM_Decode.c
/tags/V0.31/main.c
/tags/V0.31/uart.c
/tags/V0.33/BLMC.c
/tags/V0.33/PPM_Decode.c
/tags/V0.33/main.c
/tags/V0.33/uart.c
/tags/V0.35/BLMC.c
/tags/V0.35/PPM_Decode.c
/tags/V0.35/main.c
/tags/V0.35/uart.c
/tags/V0.36/BLMC.c
/tags/V0.36/PPM_Decode.c
/tags/V0.36/main.c
/tags/V0.36/uart.c
/tags/V0.37/BLMC.c
/tags/V0.37/PPM_Decode.c
/tags/V0.37/main.c
/tags/V0.37/uart.c
/tags/V0.41/BLMC.c
/tags/V0.41/PPM_Decode.c
/tags/V0.41/main.c
/tags/V0.41/uart.c
/tags/V0.42/BLMC.c
/tags/V0.42/PPM_Decode.c
/tags/V0.42/main.c
/tags/V0.42/uart.c
91 5459 d 21 h ligi /branches/V0.42_addr9-12_fix_ligi/ fixes for addr 9-12 ( Delay at startup and Addr output on console )  
/branches/V0.42_addr9-12_fix_ligi
/branches/V0.42_addr9-12_fix_ligi/Hex-Files
/branches/V0.42_addr9-12_fix_ligi/main.c
/branches/V0.42_addr9-12_fix_ligi/uart.c
90 5504 d 12 h hbuss /tags/V0.42/ V0.42 05.04.2009 - HB
BL-Adressen 5-8 und 9-12 eingefügt		  
/tags/V0.42
89 /  
88 5611 d 15 h pangu /branches/V0.41-Hexa/Hexfiles/ renamed, so it can be flashed with new KopterTool  
/branches/V0.41-Hexa/Hexfiles/MEGA8_BLC_V0_41_10A_ADR_1-4.hex
/branches/V0.41-Hexa/Hexfiles/MEGA8_BLC_V0_41_10A_ADR_5.hex
/branches/V0.41-Hexa/Hexfiles/MEGA8_BLC_V0_41_10A_ADR_6.hex
/branches/V0.41-Hexa/Hexfiles/BrushLess-Ctrl_V0_41_10A_ADR_1-4.hex
/branches/V0.41-Hexa/Hexfiles/BrushLess-Ctrl_V0_41_10A_ADR_5.hex
/branches/V0.41-Hexa/Hexfiles/BrushLess-Ctrl_V0_41_10A_ADR_6.hex
87 5749 d 12 h ingob /tags/V0.41/Hex-Files/BL-Ctrl_V1_1_and_V1_2/ Im Projektarchiv umbenannt  
/tags/V0.41/Hex-Files/BL-Ctrl_V1_1_and_V1_2/BrushLess-Ctrl_MEGA8_V0_41_10A.hex
/tags/V0.41/Hex-Files/BL-Ctrl_V1_1_and_V1_2/BrushLess-Ctrl_V0_41_10A.hex
86 5749 d 12 h ingob /tags/V0.41/Hex-Files/BL-Ctrl_V1_1_and_V1_2/ Im Projektarchiv umbenannt  
/tags/V0.41/Hex-Files/BL-Ctrl_V1_1_and_V1_2/BrushLess-Ctrl_MEGA8_V0_41_6A.hex
/tags/V0.41/Hex-Files/BL-Ctrl_V1_1_and_V1_2/BrushLess-Ctrl_V0_41_6A.hex
85 5764 d 1 h pangu /branches/V0.41-Hexa/Hexfiles/ rename versions, add HEx for ESC 1-4  
/branches/V0.41-Hexa/Hexfiles/BrushLess-Ctrl_V0_41_10A_ADR_1-4.hex
/branches/V0.41-Hexa/Hexfiles/BrushLess-Ctrl_V0_41_10A_ADR_5.hex
/branches/V0.41-Hexa/Hexfiles/BrushLess-Ctrl_V0_41_10A_ADR_6.hex
/branches/V0.41-Hexa/Hexfiles/BrushLess-Ctrl_V0_41_10A_ADR_5_for_BL-Ctrl_V1_0.hex
/branches/V0.41-Hexa/Hexfiles/BrushLess-Ctrl_V0_41_10A_ADR_6_for_BL-Ctrl_V1_0.hex
84 5764 d 7 h pangu /branches/V0.41-Hexa/Hexfiles/ Hexfiles for ESC #5 and #6  
/branches/V0.41-Hexa/Hexfiles
/branches/V0.41-Hexa/Hexfiles/BrushLess-Ctrl_V0_41_10A_ADR_5_for_BL-Ctrl_V1_0.hex
/branches/V0.41-Hexa/Hexfiles/BrushLess-Ctrl_V0_41_10A_ADR_6_for_BL-Ctrl_V1_0.hex
83 5764 d 7 h pangu /branches/V0.41-Hexa/ These were the wrong HexFiles, I'll compile some on Request.  
/branches/V0.41-Hexa/Hex-Files
82 5764 d 11 h pangu /branches/V0.41-Hexa/ let the BSC initialize pairwise: 1+2,3+4,5+6
so they do not beep clockwise within 6, but pairwise within 3 seconds		  
/branches/V0.41-Hexa/main.c
81 5805 d 15 h pangu /branches/V0.41-Hexa/ und hier kommen auch die Modifikationen :)  
/branches/V0.41-Hexa/main.c
/branches/V0.41-Hexa/main.h
/branches/V0.41-Hexa/makefile
/branches/V0.41-Hexa/uart.c
80 5805 d 15 h pangu /branches/V0.41-Hexa/ Modifikationen für 6 Motoren und Fix für WinAVR-20071221 von Pangu  
/branches/V0.41-Hexa
79 /  
78 5881 d 9 h hbuss /tags/V0.41/ V0.41 22.03.2008 - HB
Version auch für Platinen V1.2
Überstromerkennung (Phasenkurzschluss) beim Anwerfen des Motors -> Blinkt 10 mal bei Überstrom in der Startphase
Das Makefile erzeugt jetzt die richtigen HexFile-Namen		  
/tags/V0.41