Subversion Repositories BL-Ctrl

Rev

Go to most recent revision | Show changed files | Directory listing | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
114 4567 d 11 h holgerb /BL-Ctrl_2.0/V0.31/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB

Changes:
0.30a 2010.09.02 H.Buss
- avoids reported short power-loss

0.31a 2010.10.20 H.Buss
- higher accuracy of temperature measurement > 100°C
- slower power-down in case of overheat

0.31b
- modifications for the 2.0c-Hardware (thicker current-messurement-shunt)
 
113 4583 d 8 h /branches/  
112 4767 d 5 h /branches/  
111 4875 d 12 h holgerb /BL-Ctrl_2.0/V0.31/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB

Changes:
0.30a 2010.09.02 H.Buss
- avoids reported short power-loss

0.31a 2010.10.20 H.Buss
- higher accuracy of temperature measurement > 100°C
- slower power-down in case of overheat
 
110 4938 d 10 h ingob /tags/V0.42/Hex-Files/BL-Ctrl_V1_1_and_V1_2/ deleted old files  
109 4938 d 10 h ingob /tags/V0.42/Hex-Files/BL-Ctrl_V1_1_and_V1_2/ typo in filename fixed  
108 4993 d 8 h holgerb /BL-Ctrl_2.0/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB

Changes:
0.30a 2010.09.02 H.Buss
- avoids reported short power-loss
- no selftest if powered via MKUSB
 
107 4993 d 8 h holgerb /BL-Ctrl_2.0/V0.30/ 0.30a 2010.09.02 H.Buss
- avoids short power-loss
- no selftest if powered via MKUSB
 
106 5009 d 8 h holgerb /BL-Ctrl_2.0/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB
 
105 5009 d 8 h holgerb /BL-Ctrl_2.0/ Hex-Files BL-Ctrl2.0
Adresses 1-8 and 9-12

Attention:
The firmware only works on the original processor with MikroKopter BL2.0 Bootloader
Do not install these files via ISP - only through MKUSB
 
104 5009 d 8 h ingob /BL-Ctrl_2.0/  
103 5064 d 15 h /branches/  
102 5064 d 16 h /branches/V0.37_PA/  
101 5065 d 6 h /branches/V0.37_PA/  
100 5065 d 7 h /branches/V0.37_PA/ Optimierungsversuch der Phasensteuerung
Autor: valbas
 
99 5119 d 8 h ingob /  
98 /  
97 /  
96 /  
95 5317 d 13 h ingob /tags/V0.42/  
94 /  
93 5317 d 13 h ingob /  
92 5317 d 13 h ingob /  
91 5463 d 12 h ligi /branches/V0.42_addr9-12_fix_ligi/ fixes for addr 9-12 ( Delay at startup and Addr output on console )  
90 5508 d 3 h hbuss /tags/V0.42/ V0.42 05.04.2009 - HB
BL-Adressen 5-8 und 9-12 eingefügt
 
89 /  
88 5615 d 6 h pangu /branches/V0.41-Hexa/Hexfiles/ renamed, so it can be flashed with new KopterTool  
87 5753 d 3 h ingob /tags/V0.41/Hex-Files/BL-Ctrl_V1_1_and_V1_2/ Im Projektarchiv umbenannt  
86 5753 d 3 h ingob /tags/V0.41/Hex-Files/BL-Ctrl_V1_1_and_V1_2/ Im Projektarchiv umbenannt  
85 5767 d 15 h pangu /branches/V0.41-Hexa/Hexfiles/ rename versions, add HEx for ESC 1-4  
84 5767 d 22 h pangu /branches/V0.41-Hexa/Hexfiles/ Hexfiles for ESC #5 and #6  
83 5767 d 22 h pangu /branches/V0.41-Hexa/ These were the wrong HexFiles, I'll compile some on Request.  
82 5768 d 1 h pangu /branches/V0.41-Hexa/ let the BSC initialize pairwise: 1+2,3+4,5+6
so they do not beep clockwise within 6, but pairwise within 3 seconds
 
81 5809 d 5 h pangu /branches/V0.41-Hexa/ und hier kommen auch die Modifikationen :)  
80 5809 d 5 h pangu /branches/V0.41-Hexa/ Modifikationen für 6 Motoren und Fix für WinAVR-20071221 von Pangu  
79 /  
78 5884 d 23 h hbuss /tags/V0.41/ V0.41 22.03.2008 - HB
Version auch für Platinen V1.2
Überstromerkennung (Phasenkurzschluss) beim Anwerfen des Motors -> Blinkt 10 mal bei Überstrom in der Startphase
Das Makefile erzeugt jetzt die richtigen HexFile-Namen
 
77 /  
76 /  
75 /