Subversion Repositories FlightCtrl

Rev

Go to most recent revision | Show changed files | Directory listing | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
2500 /  
2499 /  
2498 /  
2497 /  
2496 /  
2495 /  
2494 3631 d 22 h ingob /MikroKopter-Tool/ MK-Tool V2.08d:
Bugfix: Version information of NaviCtrl, FlightCtrl was sometimes wrong		  
2493 3632 d 0 h ingob /MikroKopter-Tool/ MK-Tool V2.08d:
Bugfix: Version information of NaviCtrl, FlightCtrl was sometimes wrong		  
2492 3641 d 0 h holgerb /tags/V2.08a/ 2.08a (10.10.2014)
- Redundance now In Flag3
- Boat-Moade implemented
- New Gyro DriftCompensation implemented
- sending Offset values to NC for Logging
- Menu: Neutral Values of Gyro now in full resolution
- camera releases via automatic distances faster than 1 sec
- clamp Altitude setpoint at +15m instead of +10m to allow faster starting
- set all channels to zero in case of RC-Lost
- removed: GPS_Z
- New Parameter: Parameter_Hoehe_TiltCompensation
- Default Failsafe-Time is 60sec (was 30sek before)
- Sensitive_RC removed
- Bugfix: WP-Event was sometimes triggered two times
- transmit HoverGas to NC for logging		  
2491 /  
2490 3641 d 1 h ingob /MikroKopter-Tool/ MK-Tool V2.08b  
2489 /  
2488 /  
2487 /  
2486 /  
2485 /  
2484 3710 d 22 h holgerb /tags/V2.06f/Hex-Files/ 2.06f (21.7.2014)
- Secure function: Avoid that the Altitude setpoint can be much higher than the actual altitude
- Use MinGas setting before while "Waiting for takeoff" instead of "AltitudeMinGas".		  
2483 3710 d 22 h holgerb /tags/V2.06f/Hex-Files/ 2.06f (21.7.2014)
- Secure function: Avoid that the Altitude setpoint can be much higher than the actual altitude
- Use MinGas setting before while "Waiting for takeoff" instead of "AltitudeMinGas".		  
2482 /  
2481 /  
2480 /  
2479 /  
2478 /  
2477 /  
2476 /  
2475 /  
2474 /  
2473 /  
2472 3724 d 23 h holgerb /tags/V2.06f/ 2.06f (21.7.2014)
- Secure function: Avoid that the Altitude setpoint can be much higher than the actual altitude
- Use MinGas setting before while "Waiting for takeoff" instead of "AltitudeMinGas".		  
2471 /  
2470 3744 d 23 h ingob /MikroKopter-Tool/  
2469 3745 d 0 h holgerb /tags/V2.06e/ 2.06d (16.06.2014)
- Starting with activated Altitudecontrol: Keep setpoint -2m until Gas-Stick rises up
- Bugfix: Redundant slave: wait at start until BLc are configured

2.06e (24.06.2014)
- Bugfix: BL-Config of motors 9-12 was deactivated
- reading the SW-Version of the BLs
- Bugfix: Motor 1 sometimes reported "software not compatible" in BL-Settings
- Transmit all version numbers to KopterTool		  
2468 /  
2467 /  
2466 /  
2465 /  
2464 /  
2463 /  
2462 /  
2461 /