Subversion Repositories Projects

Rev

Rev 468 | Rev 474 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

/****************************************************************************
 *   Copyright (C) 2009 by Claas Anders "CaScAdE" Rathje                    *
 *   admiralcascade@gmail.com                                               *
 *   Project-URL: http://www.mylifesucks.de/oss/c-osd/                      *
 *                                                                          *
 *   This program is free software; you can redistribute it and/or modify   *
 *   it under the terms of the GNU General Public License as published by   *
 *   the Free Software Foundation; either version 2 of the License.         *
 *                                                                          *
 *   This program is distributed in the hope that it will be useful,        *
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of         *
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the          *
 *   GNU General Public License for more details.                           *
 *                                                                          *
 *   You should have received a copy of the GNU General Public License      *
 *   along with this program; if not, write to the                          *
 *   Free Software Foundation, Inc.,                                        *
 *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.              *
 *                                                                          *
 *                                                                          *
 *   Credits to:                                                            *
 *   Holger Buss & Ingo Busker from mikrokopter.de for the MK project + SVN *
 *   Gregor "killagreg" Stobrawa for making the MK code readable            *
 *   Klaus "akku" Buettner for the hardware                                 *
 *   Manuel "KeyOz" Schrape for explaining the MK protocol to me            *
 ****************************************************************************/


#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <avr/pgmspace.h>
#include "main.h"
#include "max7456_software_spi.h"
#include "usart1.h"
#include "osd_helpers.h"
#include "config.h"
#include "spi.h"
#include "buttons.h"

/* TODO:
 * - verifiy correctness of values
 * - clean up code :)
 */


#if !(ALLCHARSDEBUG|(WRITECHARS != -1))
// data structs not needed for character flashing
#include "mk-data-structs.h"

/* ##########################################################################
 * global definitions and global vars
 * ##########################################################################*/


volatile uint16_t setsReceived = 0;

volatile NaviData_t naviData;
volatile DebugOut_t debugData;

// cache old vars for blinking attribute, checkup is faster than full
// attribute write each time
volatile uint8_t last_UBat = 255;
volatile uint8_t last_RC_Quality = 255;

// 16bit should be enough, normal LiPos don't last that long
volatile uint16_t uptime = 0;
volatile uint16_t timer = 0;

// remember last time data was received
volatile uint8_t seconds_since_last_data = 0;

// store stats description in progmem to save space
char stats_item_0[] PROGMEM = "max Altitude:";
char stats_item_1[] PROGMEM = "max Speed   :";
char stats_item_2[] PROGMEM = "max Distance:";
char stats_item_3[] PROGMEM = "min voltage :";
char stats_item_4[] PROGMEM = "max time    :";
char stats_item_5[] PROGMEM = "longitude   :";
char stats_item_6[] PROGMEM = "latitude    :";
char stats_item_7[] PROGMEM = "max current :";
char* stats_item_pointers[] PROGMEM = {stats_item_0, stats_item_1, stats_item_2,
    stats_item_3, stats_item_4, stats_item_5, stats_item_6, stats_item_7};

#endif // ends !(ALLCHARSDEBUG|(WRITECHARS != -1))

// general PAL|NTSC distingiusch stuff
uint8_t top_line = 1;
uint8_t bottom_line = 14;

// battery voltages
uint8_t min_voltage = 0;
uint8_t max_voltage = 0;

// Flags
uint8_t COSD_FLAGS = 0, COSD_FLAGS2 = 0;

/* ##########################################################################
 * Interrupt handler
 * ##########################################################################*/


/**
 * handler for undefined Interrupts
 * if not defined AVR will reset in case any unhandled interrupts occur
 */

ISR(__vector_default) {
    asm("nop");
}

#if !(ALLCHARSDEBUG|(WRITECHARS != -1))
/* ##########################################################################
 * timer stuff
 * ##########################################################################*/


/**
 * timer kicks in every 1000uS ^= 1ms
 */

ISR(TIMER0_OVF_vect) {
    OCR0 = 15; // preload
    if (!timer--) {
        uptime++;
        timer = 999;
        seconds_since_last_data++;
    }
    // in case there is still some spi data to send do it now
    if (spi_ready && icnt) {
        SPDR = *iptr;
    }
}
#endif // ends !(ALLCHARSDEBUG|(WRITECHARS != -1))#endif // ends !(ALLCHARSDEBUG|(WRITECHARS != -1))

/* ##########################################################################
 * MAIN
 * ##########################################################################*/

int main(void) {

    // set up FLAGS, compiler should flatten this one
    COSD_FLAGS = (NTSC << 0);
    COSD_FLAGS |= (HUD << 1);
    COSD_FLAGS |= (ARTHORIZON << 2);
    COSD_FLAGS |= (BIGVARIO << 3);
    COSD_FLAGS |= (STATS << 4);
    COSD_FLAGS |= (WARNINGS << 5);

    // set up Atmega162 Ports
    DDRA |= (1 << PA1); // PA1 output (/CS)
    MAX_CS_HIGH
    DDRA |= (1 << PA2); // PA2 output (SDIN)
    MAX_SDIN_LOW
    DDRA |= (1 << PA3); // PA3 output (SCLK)
    MAX_SCLK_LOW
    DDRA |= (1 << PA5); // PA5 output (RESET)
    MAX_RESET_HIGH

    DDRC |= (1 << PC0); // PC0 output (LED1 gn)
    LED1_OFF
    DDRC |= (1 << PC1); // PC1 output (LED2 rt)
    LED2_OFF
    DDRC |= (1 << PC2); // PC2 output (LED3 gn)
    LED3_OFF
    DDRC |= (1 << PC3); // PC3 output (LED4 rt)
    LED4_OFF

    DDRC &= ~(1 << PC4); // PC4 input  (MODE)
    PORTC |= (1 << PC4); // pullup
    DDRC &= ~(1 << PC5); // PC5 input  (SET)
    PORTC |= (1 << PC5); // pullup

    // set up top and bottom lines
    if (COSD_FLAGS & COSD_FLAG_NTSC) {
        bottom_line = 12;
    } else {
        bottom_line = 14;
    }

    // reset the MAX7456 to be sure any undefined states do no harm
    MAX_RESET_LOW
    MAX_RESET_HIGH

    // give the FC/NC and the maxim time to come up
    LED4_ON
    _delay_ms(2000);

    LED4_OFF


    //Pushing NEW chars to the MAX7456
#if (WRITECHARS != -1)
            // DISABLE display (VM0)
            spi_send_byte(0x00, 0b00000000);
#include "characters.c"
#endif

    // Setup Video Mode
    if (COSD_FLAGS & COSD_FLAG_NTSC) {
        // NTSC + enable display immediately (VM0)
        spi_send_byte(0x00, 0b00001000);
    } else {
        // PAL + enable display immediately (VM0)
        spi_send_byte(0x00, 0b01001000);
    }

    /*// clear all display-mem (DMM)
    spi_send_byte(0x04, 0b00000100);

    // clearing takes 12uS according to maxim so lets wait longer
    _delay_us(120);

    // 8bit mode
    spi_send_byte(0x04, 0b01000000);*/


    // clear display memory and set to 8bit mode
    clear();

#if !(ALLCHARSDEBUG|(WRITECHARS != -1))
    // init usart
    usart1_init();

    // set up timer
    TCCR0 |= (1 << CS00) | (1 << CS01); // timer0 prescaler 64
    OCR0 = 15; // preload
    TIMSK |= (1 << TOIE0); // enable overflow timer0

    DDRD |= (1 << PD2); // PD2 output (INT0)
    SpiMasterInit();

    // enable interrupts
    sei();

#endif

    //write_ascii_string(2,  7, "         CaScAdE          ");
    //write_ascii_string(2,  8, "is TESTING his open source");
    //write_ascii_string(2,  9, "    EPi OSD Firmware");

    // we are ready
    LED3_ON

#if ALLCHARSDEBUG | (WRITECHARS != -1)
        clear();
    write_all_chars();
#else
        // clear serial screen
        //usart1_puts("\x1B[2J\x1B[H");
        //usart1_puts("hello world!\r\n");
#if FCONLY
        // request data ever 100ms from FC;
        usart1_request_mk_data(0, 'd', 100);
#else
        // request OSD Data from NC every 100ms
        usart1_request_mk_data(1, 'o', 100);

    // and disable debug...
    usart1_request_mk_data(0, 'd', 0);
#endif

    // stats for after flight
    int16_t max_Altimeter = 0;
    uint8_t min_UBat = 255;
#if !(FCONLY)
    uint16_t max_GroundSpeed = 0;
    int16_t max_Distance = 0;
    uint16_t max_FlyingTime = 0;

    // flags from last round to check for changes
    uint8_t old_MKFlags = 0;

    char* directions[8] = {"NE", "E ", "SE", "S ", "SW", "W ", "NW", "N "};
    //char arrowdir[8] = {218, 217, 224, 223, 222, 221, 220, 219};
#endif

    while (1) {
        // in case SPI is ready and there is nothing to send right now
        if (!icnt && spi_ready) {
            // correct transfer ends with d (done)
            if (spi_cmd_buffer[0] == 'd') {
                ampere = spi_cmd_buffer[1] << 8;
                ampere |= spi_cmd_buffer[2];
                                ampere_wasted = spi_cmd_buffer[3];
                                ampere_wasted = ampere_wasted << 8;
                                ampere_wasted |= spi_cmd_buffer[4];
                                ampere_wasted = ampere_wasted << 8;
                                ampere_wasted |= spi_cmd_buffer[5];
                                ampere_wasted = ampere_wasted << 8;
                                ampere_wasted |= spi_cmd_buffer[6];
                                //ampere = *((int16_t *) spi_cmd_buffer + 1);
                                //ampere_wasted = *((int32_t *) &spi_cmd_buffer + 3);
                                // if this is the first receival we should print the small A
                                if (!(COSD_FLAGS2 & COSD_FLAG_STROMREC)) {
                                        COSD_FLAGS2 &= ~COSD_ICONS_WRITTEN;
                                        // update this flag
                        COSD_FLAGS2 |= COSD_FLAG_STROMREC;
                                }
                //write_ascii_char(8+4*30, 'v'); // valid
            } else {
                // update flags
                COSD_FLAGS2 &= ~COSD_FLAG_STROMREC;
                //write_ascii_char(8+4*30, 'i'); // invalid
            }
            spi_cmd_buffer[0] = 'A';
            spi_cmd_buffer[1] = 'B';
            spi_cmd_buffer[2] = 'C';
                        spi_cmd_buffer[3] = 'D';
                        spi_cmd_buffer[4] = 'E';
                        spi_cmd_buffer[5] = 'F';
                        spi_cmd_buffer[6] = 'G';
            StartTransfer((unsigned char*) spi_cmd_buffer, 7);
        }
        if (rxd_buffer_locked) {
#if FCONLY
            if (rxd_buffer[2] == 'D') { // FC Data
                Decode64();
                debugData = *((DebugOut_t*) pRxData);

                // init on first data retrival, distinguished by last battery :)
                if (last_UBat == 255) {
                    // fix for min_UBat
                    min_UBat = debugData.Analog[9];
                    init_cosd(debugData.Analog[9]);
                }
                #include "osd_fcmode_default.c"
            }
#else
            if (rxd_buffer[2] == 'O') { // NC OSD Data
                Decode64();
                naviData = *((NaviData_t*) pRxData);

                // init on first data retrival, distinguished by last battery :)
                if (last_UBat == 255) {
                    // fix for min_UBat
                    min_UBat = naviData.UBat;
                    init_cosd(naviData.UBat);
                }
                #include "osd_ncmode_default.c"
            }
#endif
            rxd_buffer_locked = 0;
        }
        // handle keypress
        if (s1_pressed()) {
            config_menu();
        }
        if (seconds_since_last_data > 2) {
#if FCONLY
            // request data ever 100ms from FC;
            usart1_request_mk_data(0, 'd', 100);
#else
            // request OSD Data from NC every 100ms
            usart1_request_mk_data(1, 'o', 100);

            // and disable debug...
            usart1_request_mk_data(0, 'd', 0);
#endif
        }
    }
#endif
    return 0;
}