Subversion Repositories Projects

Rev

Blame | Last modification | View Log | RSS feed

// MESSAGE SET_GLOBAL_POSITION_SETPOINT_INT PACKING

#define MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT 53

typedef struct __mavlink_set_global_position_setpoint_int_t
{
 int32_t latitude; ///< WGS84 Latitude position in degrees * 1E7
 int32_t longitude; ///< WGS84 Longitude position in degrees * 1E7
 int32_t altitude; ///< WGS84 Altitude in meters * 1000 (positive for up)
 int16_t yaw; ///< Desired yaw angle in degrees * 100
 uint8_t coordinate_frame; ///< Coordinate frame - valid values are only MAV_FRAME_GLOBAL or MAV_FRAME_GLOBAL_RELATIVE_ALT
} mavlink_set_global_position_setpoint_int_t;

#define MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT_LEN 15
#define MAVLINK_MSG_ID_53_LEN 15



#define MAVLINK_MESSAGE_INFO_SET_GLOBAL_POSITION_SETPOINT_INT { \
        "SET_GLOBAL_POSITION_SETPOINT_INT", \
        5, \
        {  { "latitude", NULL, MAVLINK_TYPE_INT32_T, 0, 0, offsetof(mavlink_set_global_position_setpoint_int_t, latitude) }, \
         { "longitude", NULL, MAVLINK_TYPE_INT32_T, 0, 4, offsetof(mavlink_set_global_position_setpoint_int_t, longitude) }, \
         { "altitude", NULL, MAVLINK_TYPE_INT32_T, 0, 8, offsetof(mavlink_set_global_position_setpoint_int_t, altitude) }, \
         { "yaw", NULL, MAVLINK_TYPE_INT16_T, 0, 12, offsetof(mavlink_set_global_position_setpoint_int_t, yaw) }, \
         { "coordinate_frame", NULL, MAVLINK_TYPE_UINT8_T, 0, 14, offsetof(mavlink_set_global_position_setpoint_int_t, coordinate_frame) }, \
         } \
}



/**
 * @brief Pack a set_global_position_setpoint_int message
 * @param system_id ID of this system
 * @param component_id ID of this component (e.g. 200 for IMU)
 * @param msg The MAVLink message to compress the data into
 *
 * @param coordinate_frame Coordinate frame - valid values are only MAV_FRAME_GLOBAL or MAV_FRAME_GLOBAL_RELATIVE_ALT
 * @param latitude WGS84 Latitude position in degrees * 1E7
 * @param longitude WGS84 Longitude position in degrees * 1E7
 * @param altitude WGS84 Altitude in meters * 1000 (positive for up)
 * @param yaw Desired yaw angle in degrees * 100
 * @return length of the message in bytes (excluding serial stream start sign)
 */

static inline uint16_t mavlink_msg_set_global_position_setpoint_int_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg,
                                                       uint8_t coordinate_frame, int32_t latitude, int32_t longitude, int32_t altitude, int16_t yaw)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
        char buf[15];
        _mav_put_int32_t(buf, 0, latitude);
        _mav_put_int32_t(buf, 4, longitude);
        _mav_put_int32_t(buf, 8, altitude);
        _mav_put_int16_t(buf, 12, yaw);
        _mav_put_uint8_t(buf, 14, coordinate_frame);

        memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, 15);
#else
        mavlink_set_global_position_setpoint_int_t packet;
        packet.latitude = latitude;
        packet.longitude = longitude;
        packet.altitude = altitude;
        packet.yaw = yaw;
        packet.coordinate_frame = coordinate_frame;

        memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, 15);
#endif

        msg->msgid = MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT;
        return mavlink_finalize_message(msg, system_id, component_id, 15, 33);
}

/**
 * @brief Pack a set_global_position_setpoint_int message on a channel
 * @param system_id ID of this system
 * @param component_id ID of this component (e.g. 200 for IMU)
 * @param chan The MAVLink channel this message was sent over
 * @param msg The MAVLink message to compress the data into
 * @param coordinate_frame Coordinate frame - valid values are only MAV_FRAME_GLOBAL or MAV_FRAME_GLOBAL_RELATIVE_ALT
 * @param latitude WGS84 Latitude position in degrees * 1E7
 * @param longitude WGS84 Longitude position in degrees * 1E7
 * @param altitude WGS84 Altitude in meters * 1000 (positive for up)
 * @param yaw Desired yaw angle in degrees * 100
 * @return length of the message in bytes (excluding serial stream start sign)
 */

static inline uint16_t mavlink_msg_set_global_position_setpoint_int_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan,
                                                           mavlink_message_t* msg,
                                                           uint8_t coordinate_frame,int32_t latitude,int32_t longitude,int32_t altitude,int16_t yaw)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
        char buf[15];
        _mav_put_int32_t(buf, 0, latitude);
        _mav_put_int32_t(buf, 4, longitude);
        _mav_put_int32_t(buf, 8, altitude);
        _mav_put_int16_t(buf, 12, yaw);
        _mav_put_uint8_t(buf, 14, coordinate_frame);

        memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, 15);
#else
        mavlink_set_global_position_setpoint_int_t packet;
        packet.latitude = latitude;
        packet.longitude = longitude;
        packet.altitude = altitude;
        packet.yaw = yaw;
        packet.coordinate_frame = coordinate_frame;

        memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, 15);
#endif

        msg->msgid = MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT;
        return mavlink_finalize_message_chan(msg, system_id, component_id, chan, 15, 33);
}

/**
 * @brief Encode a set_global_position_setpoint_int struct into a message
 *
 * @param system_id ID of this system
 * @param component_id ID of this component (e.g. 200 for IMU)
 * @param msg The MAVLink message to compress the data into
 * @param set_global_position_setpoint_int C-struct to read the message contents from
 */

static inline uint16_t mavlink_msg_set_global_position_setpoint_int_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_set_global_position_setpoint_int_t* set_global_position_setpoint_int)
{
        return mavlink_msg_set_global_position_setpoint_int_pack(system_id, component_id, msg, set_global_position_setpoint_int->coordinate_frame, set_global_position_setpoint_int->latitude, set_global_position_setpoint_int->longitude, set_global_position_setpoint_int->altitude, set_global_position_setpoint_int->yaw);
}

/**
 * @brief Send a set_global_position_setpoint_int message
 * @param chan MAVLink channel to send the message
 *
 * @param coordinate_frame Coordinate frame - valid values are only MAV_FRAME_GLOBAL or MAV_FRAME_GLOBAL_RELATIVE_ALT
 * @param latitude WGS84 Latitude position in degrees * 1E7
 * @param longitude WGS84 Longitude position in degrees * 1E7
 * @param altitude WGS84 Altitude in meters * 1000 (positive for up)
 * @param yaw Desired yaw angle in degrees * 100
 */

#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS

static inline void mavlink_msg_set_global_position_setpoint_int_send(mavlink_channel_t chan, uint8_t coordinate_frame, int32_t latitude, int32_t longitude, int32_t altitude, int16_t yaw)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
        char buf[15];
        _mav_put_int32_t(buf, 0, latitude);
        _mav_put_int32_t(buf, 4, longitude);
        _mav_put_int32_t(buf, 8, altitude);
        _mav_put_int16_t(buf, 12, yaw);
        _mav_put_uint8_t(buf, 14, coordinate_frame);

        _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT, buf, 15, 33);
#else
        mavlink_set_global_position_setpoint_int_t packet;
        packet.latitude = latitude;
        packet.longitude = longitude;
        packet.altitude = altitude;
        packet.yaw = yaw;
        packet.coordinate_frame = coordinate_frame;

        _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT, (const char *)&packet, 15, 33);
#endif
}

#endif

// MESSAGE SET_GLOBAL_POSITION_SETPOINT_INT UNPACKING


/**
 * @brief Get field coordinate_frame from set_global_position_setpoint_int message
 *
 * @return Coordinate frame - valid values are only MAV_FRAME_GLOBAL or MAV_FRAME_GLOBAL_RELATIVE_ALT
 */

static inline uint8_t mavlink_msg_set_global_position_setpoint_int_get_coordinate_frame(const mavlink_message_t* msg)
{
        return _MAV_RETURN_uint8_t(msg,  14);
}

/**
 * @brief Get field latitude from set_global_position_setpoint_int message
 *
 * @return WGS84 Latitude position in degrees * 1E7
 */

static inline int32_t mavlink_msg_set_global_position_setpoint_int_get_latitude(const mavlink_message_t* msg)
{
        return _MAV_RETURN_int32_t(msg,  0);
}

/**
 * @brief Get field longitude from set_global_position_setpoint_int message
 *
 * @return WGS84 Longitude position in degrees * 1E7
 */

static inline int32_t mavlink_msg_set_global_position_setpoint_int_get_longitude(const mavlink_message_t* msg)
{
        return _MAV_RETURN_int32_t(msg,  4);
}

/**
 * @brief Get field altitude from set_global_position_setpoint_int message
 *
 * @return WGS84 Altitude in meters * 1000 (positive for up)
 */

static inline int32_t mavlink_msg_set_global_position_setpoint_int_get_altitude(const mavlink_message_t* msg)
{
        return _MAV_RETURN_int32_t(msg,  8);
}

/**
 * @brief Get field yaw from set_global_position_setpoint_int message
 *
 * @return Desired yaw angle in degrees * 100
 */

static inline int16_t mavlink_msg_set_global_position_setpoint_int_get_yaw(const mavlink_message_t* msg)
{
        return _MAV_RETURN_int16_t(msg,  12);
}

/**
 * @brief Decode a set_global_position_setpoint_int message into a struct
 *
 * @param msg The message to decode
 * @param set_global_position_setpoint_int C-struct to decode the message contents into
 */

static inline void mavlink_msg_set_global_position_setpoint_int_decode(const mavlink_message_t* msg, mavlink_set_global_position_setpoint_int_t* set_global_position_setpoint_int)
{
#if MAVLINK_NEED_BYTE_SWAP
        set_global_position_setpoint_int->latitude = mavlink_msg_set_global_position_setpoint_int_get_latitude(msg);
        set_global_position_setpoint_int->longitude = mavlink_msg_set_global_position_setpoint_int_get_longitude(msg);
        set_global_position_setpoint_int->altitude = mavlink_msg_set_global_position_setpoint_int_get_altitude(msg);
        set_global_position_setpoint_int->yaw = mavlink_msg_set_global_position_setpoint_int_get_yaw(msg);
        set_global_position_setpoint_int->coordinate_frame = mavlink_msg_set_global_position_setpoint_int_get_coordinate_frame(msg);
#else
        memcpy(set_global_position_setpoint_int, _MAV_PAYLOAD(msg), 15);
#endif
}