Subversion Repositories NaviCtrl

Rev

Rev 72 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

/*#######################################################################################*/
/* !!! THIS IS NOT FREE SOFTWARE !!!                                                     */
/*#######################################################################################*/
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Copyright (c) 2008 Ingo Busker, Holger Buss
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + FOR NON COMMERCIAL USE ONLY
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist.
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt
// + bzgl. der Nutzungsbedingungen aufzunehmen.
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen,
// + Verkauf von Luftbildaufnahmen, usw.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"
// + eindeutig als Ursprung verlinkt werden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion
// + Benutzung auf eigene Gefahr
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zulässig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Redistributions of source code (with or without modifications) must retain the above copyright notice,
// + this list of conditions and the following disclaimer.
// +   * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived
// +     from this software without specific prior written permission.
// +   * The use of this project (hardware, software, binary files, sources and documentation) is only permitted
// +     for non-commercial use (directly or indirectly)
// +     Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted
// +     with our written permission
// +   * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
// +     clearly linked as origin
// +   * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed
//
// +  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// +  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// +  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// +  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
// +  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// +  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// +  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// +  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// +  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// +  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// +  POSSIBILITY OF SUCH DAMAGE.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#include <stdio.h>
#include <string.h>
#include "91x_lib.h"
#include "uart1.h"
#include "sdc.h"
#include "ssc.h"
#include "timer.h"
#include "main.h"
#include "crc16.h"

//________________________________________________________________________________________________________________________________________
// Module name:                 sdc.c
// Compiler used:               avr-gcc 3.4.5
// Last Modifikation:   08.06.2008
// Version:                             1.07
// Authors:                             Stephan Busker, Gregor Stobrawa        
// Description:                 Source files for connecting to an sd-card using the SSC
//
//........................................................................................................................................
// Functions:                   SD_Result_t     SDC_init(void);
//                                              u8                      SDC_PutCommand (u8 *cmd);
//                                              SD_Result_t     SDC_PutSector(u32 addr,u8 *Buffer);
//                                              SD_Result_t     SDC_GetSector(u32 addr,u8 *Buffer);
//
////........................................................................................................................................
// ext. functions:              extern void SSC_Init(void);
//                                              extern u8   SSC_GetChar (void);
//                                              extern void SSC_PutChar (u8);
//                                              extern void SSC_Enable(void);
//                                              extern void SSC_Disable(void);
//                                              extern void     SSC_ClearRxFifo();
//........................................................................................................................................
//
// URL:                                 www.Mikro-Control.de
// mailto:                              stephan.busker@mikro-control.de
//________________________________________________________________________________________________________________________________________



#define CMD_GO_IDLE_STATE               0x00    /* CMD00: response R1 */
#define CMD_SEND_OP_COND                0x01    /* CMD01: response R1 */
#define CMD_SEND_IF_COND                0x08    /* CMD08: response R7 */
#define CMD_SEND_CSD                    0x09    /* CMD09: response R1 */
#define CMD_SEND_CID                    0x0A    /* CMD10: response R1 */
#define CMD_SEND_STATUS                 0x0D    /* CMD13: response R2 */
#define CMD_SET_BLOCKLEN                0x10    /* CMD16: arg0[31:0]: block length, response R1*/
#define CMD_READ_SINGLE_BLOCK   0x11    /* CMD17: arg0[31:0]: data address, response R1 */
#define CMD_WRITE_SINGLE_BLOCK  0x18    /* CMD24: arg0[31:0]: data address, response R1 */
#define CMD_APP_CMD                             0x37    /* CMD55: response R1 */
#define CMD_READ_OCR                    0x3A    /* CMD58: response R3 */
#define CMD_CRC_ON_OFF                  0x3B    /* CMD59: arg0[31:1]: stuff bits, arg0[0:0]: crc option, response R1 */                                                                        
#define ACMD_SEND_OP_COND               0x29    /* ACMD41: arg0[31]: stuff bits, arg0[30]: HCS, arg0[29:0] stuff bits*, response R1 */

#define R1_NO_ERR                               0x00
#define R1_IDLE_STATE                   0x01
#define R1_ERASE_RESET                  0x02
#define R1_ILLEGAL_CMD                  0x04
#define R1_COM_CRC_ERR                  0x08
#define R1_ERASE_SEQUENCE_ERR   0x10
#define R1_ADDRESS_ERR                  0x20
#define R1_PARAMETER_ERR                0x40
#define R1_BAD_RESPONSE                 0x80

#define R2_NO_ERR                               0x00
#define R2_CARD_LOCKED                  0x01
#define R2_ERASE_WRITE_PROT_ERR 0x02
#define R2_UNKOWN_ERR                   0x04
#define R2_CARD_CTRL_ERR                0x08
#define R2_CARD_ECC_ERR             0x10
#define R2_WRITE_PROT_ERR               0x20
#define R2_ERASE_PARAM_ERR              0x40
#define R2_OUT_OF_RANGE_ERR             0x80

#define DATA_START_TOKEN                0xFE
#define DATA_RESPONSE_MASK              0x1F
#define DATA_RESPONSE_OK                0x05
#define DATA_RESPONSE_CRC_ERR   0x0B
#define DATA_RESPONSE_WRITE_ERR 0x1D

typedef enum
{
        VER_UNKNOWN,
        VER_1X,
        VER_20
} SDVersion_t;

typedef struct
{
  u8 Valid;
  SDVersion_t Version;  // HW-Version
  u32 Capacity;                 // Memory capacity  in bytes
  u8 CID[16];                   // CID register
  u8 CSD[16];                   // CSD register
} __attribute__((packed)) SDCardInfo_t;

volatile SDCardInfo_t SDCardInfo;


//________________________________________________________________________________________________________________________________________
// Function:    CRC7(u8* cmd, u32 len);
//
// Description: This function calculated the CRC7 checksum used in the last byte of a spi command frame.
//                             
//
// Returnvalue: the function returns the crc7 including bit 0 set to 1
//________________________________________________________________________________________________________________________________________

u8 CRC7(u8 * cmd, u32 len)
{
        u8 i, a;
        u8 crc, Data;

        crc = 0; // init CRC buffer
        for (a = 0; a < len ;a++) // for every byte in the msg
        {
                Data = cmd[a];
                for (i=0;i<8;i++) // for every bit in the byte
                {
                        crc <<= 1; // shift crc
                        if ((Data & 0x80)^(crc & 0x80)) crc ^=0x09;       //xor
                        Data <<= 1;     // shift data  for next bit
                }
        }
        crc = (crc<<1)|1; // set terminating bit to 1
        return(crc);
}

u8 SDC_WaitForBusy(u32 timeout)
{
        u8 rsp = 0;
        u32 timestamp = 0;

        SSC_ClearRxFifo();
        SSC_Enable();                           // enable chipselect.
        timestamp = SetDelay(timeout);
        do     
        {
                rsp = SSC_GetChar();
                if(CheckDelay(timestamp)) break;
        }while(rsp != 0xFF);            // wait while card is busy (data out low)
        return(rsp);
}



//________________________________________________________________________________________________________________________________________
// Function:    SDC_SendCMDR1(u8 CmdNo, u32 arg);
//
// Description: This function send a command frame to the SD-Card in spi-mode.
//                             
//
// Returnvalue: The function returns the first response byte like for R1 commands
//________________________________________________________________________________________________________________________________________
u8 SDC_SendCMDR1(u8 CmdNo, u32 arg)
{
        u8 r1;
        u16 timeout = 0;
        u16 a;
        u8 cmd[6];

        SSC_ClearRxFifo();      // clear the rx fifo
        SSC_Enable();           // enable chipselect.
        SDC_WaitForBusy(500);   // wait 500ms until card is busy
        SSC_ClearRxFifo();      // clear the rx fifo
        SSC_GetChar();      // dummy to sync

        cmd[0] = 0x40|CmdNo; // set command index
        cmd[1] = (arg & 0xFF000000)>>24;
        cmd[2] = (arg & 0x00FF0000)>>16;
        cmd[3] = (arg & 0x0000FF00)>>8;
        cmd[4] = (arg & 0x000000FF);
        cmd[5] = CRC7(cmd, 5); // update checksum
        for (a = 0;a < 6; a++) // send the command sequence to the sdcard (6 bytes)
        {      
                SSC_PutChar(cmd[a]);
        }
        SSC_ClearRxFifo();      // clear the rx fifo to discard the bytes received during the transmission of the 6 command bytes

        do                                     
        {
                r1 = SSC_GetChar();       // get byte from sd-card
                if (timeout++ >500) break;
        }while(r1 == 0xFF); // wait for the response byte from sd-card.
        return(r1);
}


//________________________________________________________________________________________________________________________________________
// Function:    SDC_SendACMDR1(u8 CmdNo, u32 arg);
//                                         
// Description: This function send a application command frame to the SD-Card in spi-mode.
//                             
//
// Returnvalue: The function returns the first response byte like for R1 commands
//________________________________________________________________________________________________________________________________________
u8 SDC_SendACMDR1(u8 CmdNo, u32 arg)
{
        u8 r1 = 0xFF;
        r1 = SDC_SendCMDR1(CMD_APP_CMD, 0UL);
        if(r1 & R1_BAD_RESPONSE) return(r1);
        r1 = SDC_SendCMDR1(CmdNo, arg);
        return(r1);
}


//________________________________________________________________________________________________________________________________________
// Function:    SDC_GetData(u8 * cmd ,u8 *Buffer, u32 len);
//
// Description: This function sneds cmd an reads a datablock of len from the sd-card
//                             
//
// Returnvalue: SD_Result_t
//________________________________________________________________________________________________________________________________________

SD_Result_t SDC_GetData(u8 CmdNo, u32 addr, u8 *Buffer, u32 len)
{
        u8 rsp;        
        u16 a, crc16;
        SD_Result_t result = SD_ERROR_UNKNOWN;

        // send the command    
        rsp = SDC_SendCMDR1(CmdNo, addr);
        if (rsp != R1_NO_ERR)
        {
                result = SD_ERROR_BAD_RESPONSE;
                goto end;
        }
        SSC_ClearRxFifo();
        do
        {
                rsp = SSC_GetChar();
                if((rsp & 0xF0) == 0x00) // data error token
                {
                        result = SD_ERROR_READ_DATA;
                        goto end;
                }
        }while(rsp != DATA_START_TOKEN);
        // data start token received
        for (a = 0; a < len; a++)       // read the block from the SSC
        {
                Buffer[a] = SSC_GetChar();
        }
        // Read two bytes CRC16-Data checksum
        crc16 = SSC_GetChar(); // highbyte fisrt       
        crc16 = (crc16<<8)|SSC_GetChar(); // lowbyte last
/*      if(crc16 != CRC16(Buffer, len)) result = SD_ERROR_CRC_DATA;
        else */
result = SD_SUCCESS;
       
        end:
        if(result != SD_SUCCESS)
        {
                sprintf(text,"Error %02X reading data from sd card (R1=%02X).\r\n", result, rsp);
                SerialPutString(text);
        }
        return(result);
}


//________________________________________________________________________________________________________________________________________
// Function:    SDC_PrintCID(u8 * pCID);
//
// Description: This function prints the CIS register in a human readable format.
//                             
//
// Returnvalue: the function returns nothing
//________________________________________________________________________________________________________________________________________

void SDC_PrintCID(u8 * pCID)
{
        u8 text[50];
        u8 pn[6];
        u16 temp1, temp2;

        sprintf(text, "\r\n Manufacturer ID: %i\r\n", pCID[0]);
        SerialPutString(text);
        memcpy(pn, &pCID[1], 2);
        pn[2] = '\0'; // terminate string
        sprintf(text, " Application ID: %s\r\n",pn);
        SerialPutString(text);
        memcpy(pn, &pCID[3], 5);
        pn[5] = '\0'; // terminate string
        sprintf(text, " Product Name: %s\r\n",pn);
        SerialPutString(text);
        sprintf(text, " Product Rev.: %i.%i\r\n",pCID[8]>>4, pCID[8]&0xF);
        SerialPutString(text);
        SerialPutString(" Serial No.: ");
        for(temp1 = 0; temp1<4; temp1++)
        {
                sprintf(text,"%02X", pCID[9+temp1]);
                SerialPutString(text);
        }
        SerialPutString("\r\n");
        temp1 = pCID[14] & 0x0F;    // month
        temp2 = ((pCID[14]>>4)|(pCID[13]<<4)) + 2000; // year
        sprintf(text, " Manufac. Date: %i/%i\r\n\r\n",temp1, temp2);
        SerialPutString(text);
}

//________________________________________________________________________________________________________________________________________
// Funtion:     SDC_GetCID(u8 * pCID);
//
// Description: This function reads the CIS register form the sd card in spi mode.
//                             
//
// Returnvalue: the function returns error state
//________________________________________________________________________________________________________________________________________

SD_Result_t SDC_GetCID(u8 * pCID)
{
        return SDC_GetData(CMD_SEND_CID, 0UL, pCID, 16);
}

//________________________________________________________________________________________________________________________________________
// Funtion:     SDC_GetCSD(u8 * pCSD);
//
// Description: This function reads the CSD register form the sd card in spi mode.
//                             
//
// Returnvalue: the function returns error state
//________________________________________________________________________________________________________________________________________

SD_Result_t SDC_GetCSD(u8 * pCSD)
{
        return SDC_GetData(CMD_SEND_CSD, 0UL, pCSD, 16);
}


//________________________________________________________________________________________________________________________________________
// Funtion:     SDC_Init(void);
//
// Description: This function initialises the SDCard to spi-mode.
//                             
//
// Returnvalue: the function returns 0 if the initialisation was successfull otherwise the function returns an errorcode.
//________________________________________________________________________________________________________________________________________

SD_Result_t SDC_Init(void)
{
        u32 timeout = 0;
        u8 text[50];
        u8 rsp[6]; // SD-SPI response buffer
        SD_Result_t result = SD_ERROR_UNKNOWN;
               
        if(SD_SWITCH) // init only if the SD-Switch is indicating a card in the slot
        {
                SerialPutString("\r\n SSC init...");
                SSC_Init();
                SerialPutString("ok");

                SerialPutString("\r\n SDC init...");
                SDCardInfo.Valid = 0;
                /* The host shall supply power to the card so that the voltage is reached to Vdd_min within 250ms and
                start to supply at least 74 SD clocks to the SD card with keeping cmd line to high. In case of SPI
                mode, CS shall be held to high during 74 clock cycles. */

                SSC_Disable(); // set SD_CS high
                SSC_ClearRxFifo();      // clear the rx fifo
       
                for (timeout = 0; timeout < 15; timeout++)      // 15*8 = 120 cycles
                {
                        SSC_PutChar(0xFF);
                }
       
                // switch to idle state
                while(SDC_SendCMDR1(CMD_GO_IDLE_STATE, 0UL) != R1_IDLE_STATE)                                          
                {
                        if (timeout++ > 20)
                        {
                                SerialPutString("reset timeout");
                                result = SD_ERROR_RESET;
                                goto end;                                                                              
                        }
                }
            // enable crc feature
/*              if(SDC_SendCMDR1(CMD_CRC_ON_OFF, 1UL) != R1_IDLE_STATE)
                {
                                sprintf(text,"Bad cmd59 R1=%02X.", rsp[0]);
                                SerialPutString(text);
                                result = SD_ERROR_BAD_RESPONSE;
                                goto end;
                }*/

                // check for card hw version                                           
                // 2.7-3.6V Range = 0x01, check pattern 0xAA
                rsp[0] = SDC_SendCMDR1(CMD_SEND_IF_COND, 0x000001AA);
                // answer to cmd58 is an R7 response (R1+ 4Byte IFCond)
                if(rsp[0] & R1_BAD_RESPONSE)
                {
                        sprintf(text,"Bad cmd8 R1=%02X.", rsp[0]);
                        SerialPutString(text);
                        result = SD_ERROR_BAD_RESPONSE;
                        goto end;
                }
                if(rsp[0] & R1_ILLEGAL_CMD)
                {
                        //Ver1.X SD Memory Card or not a SD Memory Card
                        SDCardInfo.Version = VER_1X;                   
                }
                else
                {
                   // Ver2.00 or later SD Memory Card
                   // reading the remaining bytes of the R7 response
                   SDCardInfo.Version = VER_20;
                   for(timeout = 1; timeout < 5; timeout++)
                   {
                                rsp[timeout] = SSC_GetChar();
                   }
                   //check pattern
                   if(rsp[4]!= 0xAA)
                   {
                                SerialPutString("Bad cmd8 R7 check pattern.\r\n");
                                result = SD_ERROR_BAD_RESPONSE;
                                goto end;
                   }
                   if ( (rsp[3] & 0x0F)!= 0x01 ) // voltage range is not 2.7-3.6V
                   {
                               
                                SerialPutString("Card is incompatible to 3.3V.\r\n");
                                result = SD_ERROR_BAD_VOLTAGE_RANGE;
                                goto end;              
                   }
                }
       
                rsp[0] = SDC_SendCMDR1(CMD_READ_OCR, 0UL);
                // answer to cmd58 is an R3 response (R1 + 4Byte OCR)
                if(rsp[0] & R1_BAD_RESPONSE)
                {
                        sprintf(text,"Bad cmd58 R1 %02x.", rsp[0]);
                        SerialPutString(text);
                        result = SD_ERROR_BAD_RESPONSE;
                        goto end;
                }
                if(rsp[0] & R1_ILLEGAL_CMD)
                {
                        SerialPutString("Not an SD-CARD.");
                        result = SD_ERROR_NO_SDCARD;
                        goto end;
                }
                // read 4 bytes of OCR register
                for(timeout = 1; timeout < 5; timeout++)
                {
                        rsp[timeout] = SSC_GetChar();
                }
                //      NavicCtrl uses 3.3 V,  therefore check for bit 20 & 21
                if((rsp[2] & 0x30) != 0x30)
                {
                        // supply voltage is not supported by sd-card
                        SerialPutString("Card is incompatible to 3.3V.");
                        result = SD_ERROR_BAD_VOLTAGE_RANGE;
                        goto end;
                }
               
                // Initialize the sd-card sending continously ACMD_SEND_OP_COND (only supported by SD cards)
                timeout =  SetDelay(2000); // set timeout to 2000 ms (large cards tend to longer)
                do
                {
                        rsp[0] = SDC_SendACMDR1(ACMD_SEND_OP_COND, 0UL);
                        if(rsp[0] & R1_BAD_RESPONSE)
                        {
                                sprintf(text,"Bad Acmd41 R1=%02X.", rsp[0]);
                                SerialPutString(text);
                                result = SD_ERROR_BAD_RESPONSE;
                                goto end;
                        }
                        if(CheckDelay(timeout))
                        {
                            SerialPutString("Init timeout.");
                                result = SD_ERROR_INITIALIZE;
                                goto end;
                        }
                } while(rsp[0] & R1_IDLE_STATE); // loop until idle state
               
                if(rsp[0] != R1_NO_ERR)
                {
                        SerialPutString("Init error.");
                        result = SD_ERROR_INITIALIZE;
                        goto end;      
                }
                /* set block size to 512 bytes */
        if(SDC_SendCMDR1(CMD_SET_BLOCKLEN, 512UL) != R1_NO_ERR)
        {
                SerialPutString("Error setting block length to 512.");
                        result = SD_ERROR_SET_BLOCKLEN;
                        goto end;
        }
               
                //SSC_Disable(); // set SD_CS high                                                                       
                // here is the right place to inrease the SPI boud rate to maximum             
                //SSC_Enable(); // set SD_CS high

                // read CID register
                result = SDC_GetCID((u8 *)&SDCardInfo.CID);
                if(result != SD_SUCCESS)
                {
                        SerialPutString("Error reading CID.\r\n");
                        goto end;
                }
       
                // read CSD register
                result = SDC_GetCSD((u8 *)&SDCardInfo.CSD);
                if(result != SD_SUCCESS)
                {
                        SerialPutString("Error reading CSD.");
                        goto end;
                }
       
                SerialPutString("ok\r\n");
       
                u8 c_size_mult, read_bl_len;
                u32 c_size;
       
                switch(SDCardInfo.CSD[0]>>6) // check CSD Version
                {
                case 0x00: // if CSD is V1.0 structure (2GB limit)
       
                        /*
                        memory capacity = BLOCKNR * BLOCK_LEN
                        BLOCKNR = (C_SIZE+1) * MULT
                        MULT = 2^(C_SIZE_MULT+2)
                        BLOCK_LEN = 2^READ_BL_LEN
               
                        C_SIZE      is 12 bits [73:62] in CSD register
                        C_SIZE_MULT is  3 bits [49:47] in CSD register
                        READ_BL_LEN is  4 bits [83:80] in CSD register
                        */

       
                        read_bl_len = (SDCardInfo.CSD[5] & 0x0F);               //CSD[05] -> [87:80]
                        c_size = ((u32)(SDCardInfo.CSD[6] & 0x03))<<10; //CSD[06] -> [79:72]
                        c_size |= ((u32)SDCardInfo.CSD[7])<<2;                  //CSD[07] -> [71:64]
                        c_size |= (u32)(SDCardInfo.CSD[8]>>6);                  //CSD[08] -> [63:56]
                        c_size_mult = (SDCardInfo.CSD[9] & 0x03)<<1;    //CSD[09] -> [55:48]
                        c_size_mult |=(SDCardInfo.CSD[10] & 0x80)>>7;   //CSD[10] -> [47:40]
                        SDCardInfo.Capacity = (u32)(c_size+1)*(1L<<(c_size_mult+2))*(1L<<read_bl_len);
                        break;
       
                case 0x01: // if CSD is V2.0 structure (HC SD-Card > 2GB)
       
                        /*
                        memory capacity = (C_SIZE+1) * 512K byte
                        C_SIZE is 22 bits [69:48] in CSR register
                        */

       
                        c_size = ((u32)(SDCardInfo.CSD[7] & 0x3F))<<16; //CSD[07] -> [71:64]
                        c_size |= ((u32)SDCardInfo.CSD[8])<<8;                  //CSD[08] -> [63:56]
                        c_size |= (u32)SDCardInfo.CSD[9];                               //CSD[09] -> [55:48];
                        SDCardInfo.Capacity = (c_size + 1)* 512L * 1024L;
                        break;
       
                default: //unknown CSD Version
                        SDCardInfo.Capacity = 0;
                        break; 
                }
       
                switch(SDCardInfo.Version)
                {
                        case VER_1X:
                                SerialPutString("  SD-CARD V1.x");
                                break;
                        case VER_20:
                                SerialPutString("  SD-CARD V2.0 or later");
                        default:
                                break;
                }
                u16 mb_size = (u16)(SDCardInfo.Capacity/(1024L*1024L));
                sprintf(text, "\r\n  Capacity = %i MB", mb_size);
                SerialPutString(text);
       
                SDC_PrintCID((u8 *)&SDCardInfo.CID);
                SDCardInfo.Valid = 1;
                // jump point for error condition before
                end:
                SSC_Disable();
        }
        else
        {
                SSC_Deinit();
                SDCardInfo.Valid = 0;
                result = SD_ERROR_NOCARD;
                SerialPutString("No Card in Slot.");
        }
        return(result);
}


//________________________________________________________________________________________________________________________________________
// Funtion:     SDC_Deinit(void);
//
// Description: This function deinitialises the SDCard interface.
//                             
//
// Returnvalue: the function returns 0 if the initialisation was successfull otherwise the function returns an errorcode.
//________________________________________________________________________________________________________________________________________

SD_Result_t SDC_Deinit(void)
{
        SerialPutString("\r\n SDC deinit...");
        SSC_Deinit();

        SDCardInfo.Valid = 0;
        SDCardInfo.Capacity = 0;
        SDCardInfo.Version = VER_UNKNOWN;

        SerialPutString("ok");
        return(SD_SUCCESS);
}


//________________________________________________________________________________________________________________________________________
// Funtion:     SDC_PutSector(void);
//
// Description: This function writes one sector of data to the SSC
//                             
//
// Returnvalue: SD_Result_t
//________________________________________________________________________________________________________________________________________

SD_Result_t SDC_PutSector(u32 addr, const u8 *Buffer)
{
        u8 rsp;
        u16 a, crc16;
        u16 timeout = 0;
        SD_Result_t result = SD_ERROR_UNKNOWN;

        addr = addr << 9; // convert sectoradress to byteadress
        rsp = SDC_SendCMDR1(CMD_WRITE_SINGLE_BLOCK, addr);
        if (rsp != R1_NO_ERR)
        {
                result = SD_ERROR_BAD_RESPONSE;
                goto end;
        }
        SSC_ClearRxFifo();             
        for (a=0;a<20;a++)                                      // at least one byte
        {
                SSC_GetChar();
        }
        crc16 = CRC16(Buffer, 512);         // calc checksum for data block
        SSC_PutChar(DATA_START_TOKEN);          // send data start of header to the SSC
       
        for (a=0;a<512;a++)                                     // transmit one sector (normaly 512bytes) of data to the sdcard.
        {
                SSC_PutChar(Buffer[a]);
        }
        // write two bytes of crc16 to the sdcard
        SSC_PutChar((u8)(crc16>>8));            // write high byte first
        SSC_PutChar((u8)(0x00FF&crc16));        // lowbyte last
        SSC_ClearRxFifo();
        do                                                                      // wait for data response token
        {
                rsp = SSC_GetChar();
                if(timeout++ > 500)
                {
                        result = SD_ERROR_TIMEOUT;
                        goto end;
                }
        }while((rsp & 0x11) != 0x01 );
        // analyse data response token
        switch(rsp & DATA_RESPONSE_MASK)
        {
                case DATA_RESPONSE_OK:
                        result = SD_SUCCESS;
                        break;
                case DATA_RESPONSE_CRC_ERR:
                        result = SD_ERROR_CRC_DATA;
                        goto end;
                        break;
                case DATA_RESPONSE_WRITE_ERR:
                        result = SD_ERROR_WRITE_DATA;
                        goto end;
                        break;
                default:
                        result = SD_ERROR_UNKNOWN;
                        goto end;
                        break;

        }
        // wait 2 seconds until the sdcard is busy.
        rsp = SDC_WaitForBusy(2000);
        if(rsp != 0xFF)
        {
                result =  SD_ERROR_TIMEOUT;
                goto end;
        }

        // check card status
        rsp = SDC_SendCMDR1(CMD_SEND_STATUS, 0);
        // first byte of R2 response is like R1 response
        if(rsp != R1_NO_ERR)
        {
                result =  SD_ERROR_BAD_RESPONSE;
                SSC_GetChar(); // read out 2nd byte
                goto end;
        }
        // 2nd byte of r2 response
        rsp = SSC_GetChar();
        if(rsp != R2_NO_ERR)
        {
                result =  SD_ERROR_WRITE_DATA;
                SSC_GetChar();
                goto end;
        }
        end:
        if(result != SD_SUCCESS)
        {
                sprintf(text,"Error %02X writing data to sd card (R=%02X).\r\n", result, rsp);
                SerialPutString(text);
        }
        return(result);
}


//________________________________________________________________________________________________________________________________________
// Funtion:     SDC_GetSector(u32 addr,u8 *Buffer);
//
// Description: This function reads one sector of data from the SSC
//                             
//
// Returnvalue: SD_Result_t
//________________________________________________________________________________________________________________________________________

SD_Result_t SDC_GetSector(u32 addr,u8 *Buffer)
{
        addr = addr << 9; // convert sectoradress to byteadress
        return SDC_GetData(CMD_READ_SINGLE_BLOCK, addr, Buffer, 512);
}