Subversion Repositories NaviCtrl

Rev

Rev 44 | Blame | Compare with Previous | Last modification | View Log | RSS feed

/*#######################################################################################*/
/* !!! THIS IS NOT FREE SOFTWARE !!!                                                     */
/*#######################################################################################*/
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Copyright (c) 2008 Ingo Busker, Holger Buss
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + FOR NON COMMERCIAL USE ONLY
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist.
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt
// + bzgl. der Nutzungsbedingungen aufzunehmen.
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen,
// + Verkauf von Luftbildaufnahmen, usw.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"
// + eindeutig als Ursprung verlinkt werden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion
// + Benutzung auf eigene Gefahr
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zulässig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Redistributions of source code (with or without modifications) must retain the above copyright notice,
// + this list of conditions and the following disclaimer.
// +   * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived
// +     from this software without specific prior written permission.
// +   * The use of this project (hardware, software, binary files, sources and documentation) is only permitted
// +     for non-commercial use (directly or indirectly)
// +     Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted
// +     with our written permission
// +   * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
// +     clearly linked as origin
// +   * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed
//
// +  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// +  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// +  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// +  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
// +  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// +  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// +  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// +  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// +  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// +  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// +  POSSIBILITY OF SUCH DAMAGE.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#include <stdio.h>
#include "91x_lib.h"
#include "timer.h"
#include "fat16.h"
#include "sdc.h"
#include "uart1.h"


//________________________________________________________________________________________________________________________________________
// Module name:                 fat16.c
// Compiler used:               avr-gcc 3.4.5
// Last Modifikation:   16.06.2008
// Version:                             2.00
// Authors:                             Stephan Busker & Gregor Stobrawa       
// Description:                 Source files for FAT16 implementation with read and write-access
//                                              Copyright (C) 2008 Stephan Busker & Gregor Stobrawa
//........................................................................................................................................
// Functions:                   extern s16              Fat16_Init(void);
//                                              extern s16              Fat16_Deinit(void);            
//                                              extern File_t * fopen_(const u8 *filename, const s8 mode);
//                                              extern s16              fclose_(File_t *File);
//                                              extern s16              fflush_(File_t *File);
//                                              extern s16      fseek_(File_t *File, s32 offset, s16 origin);
//                                              extern s16              fgetc_(File_t *File);
//                                              extern s16              fputc_(u8 c, File_t *File);
//                                              extern u32              fread_(void *buffer, u32 size, u32 count, File_t *File);
//                                              extern u32              fwrite_(void *buffer, u32 size, u32 count, File_t *File);
//                                              extern s16              fputs_(const u8 *string, File_t *File);
//                                              extern u8 *     fgets_(u8 *string, s16 length, File_t *File);
//........................................................................................................................................
// ext. functions:              extern SD_Result_t SDC_Init(void;)
//                                              extern SD_Result_t SDC_Deinit(void);
//                      extern SD_Result_t SDC_GetSector (u32,u8 *);           
//                                              extern SD_Result_t SDC_PutSector (u32,u8 *);
//........................................................................................................................................
//
// URL:                                 www.Mikro-Control.de
// mailto:                              stephan.busker@mikro-control.de
//________________________________________________________________________________________________________________________________________

/*
FAT16 Drive Layout:
Description                                             Offset
Volume Boot Sector                                      Start of Partition
Fat Tables                                                      Start + # of Reserved Sectors
Root Directory Entry                            Start + # of Reserved + (# of Sectors Per FAT * 2)
Data Area (Starts with Cluster #2)      Start + # of Reserved + (# of Sectors Per FAT * 2) + ((Maximum Root Directory Entries * 32) / Bytes per Sector)
*/



/*
________________________________________________________________________________________________________________________________________
 
        Structure of an partition entry                        
________________________________________________________________________________________________________________________________________

        Partition Entry is 16 bytes long
*/

typedef struct
{
        u8      PartitionState;                         // Current State of Partition (00h=Inactive, 80h=Active)
        u8      BeginningHead;                          // Beginning of Partition - Head
        u16     BeginningCylSec;                        // Beginning of Partition - Cylinder/Sector (See Below)
        u8      Type;                                           // Type of Partition (See List Below)
        u8      EndHead;                                        // End of Partition - Head
        u16     EndCylSec;                                      // End of Partition - Cylinder/Sector
        u32     NoSectorsBeforePartition;       // Number of Sectors between the MBR and the First Sector in the Partition
        u32     NoSectorsPartition      ;               // Number of Sectors in the Partition
} __attribute__((packed)) PartitionEntry_t;

/*
Coding of Cylinder/Sector words

Cylinder is 10 bits:  [7:0] at [15:8] and [9:8] at [7:6]
Sector is 5 bits:  [5:0] at [5:0]  
*/


// Partition Types:
#define PART_TYPE_UNKNOWN                       0x00
#define PART_TYPE_FAT12                         0x01
#define PART_TYPE_XENIX                         0x02
#define PART_TYPE_FAT16_ST_32_MB        0x04
#define PART_TYPE_EXTDOS                        0x05
#define PART_TYPE_FAT16_LT_32_MB        0x06
#define PART_TYPE_NTFS                          0x07
#define PART_TYPE_FAT32                         0x0B
#define PART_TYPE_FAT32LBA                      0x0C
#define PART_TYPE_FAT16LBA                      0x0E
#define PART_TYPE_EXTDOSLBA                     0x0F
#define PART_TYPE_EISA                          0x12
#define PART_TYPE_ONTRACK                       0x33
#define PART_TYPE_NOVELL                        0x40
#define PART_TYPE_DYNAMIC                       0x42
#define PART_TYPE_PCIX                          0x4B
#define PART_TYPE_LINUX_SWAP            0x82
#define PART_TYPE_LINUX_NATIVE          0x83
#define PART_TYPE_LINUX_LVM                     0x8E
#define PART_TYPE_PHOENIXSAVE           0xA0
#define PART_TYPE_FREEBSD                       0xA5
#define PART_TYPE_OPENBSD                       0xA6
#define PART_TYPE_NETNBSD                       0xA9
#define PART_TYPE_CPM                           0xDB
#define PART_TYPE_DBFS                          0xE0
#define PART_TYPE_BBT                           0xFF


/*
________________________________________________________________________________________________________________________________________
 
        Structure of the MasterBootRecord                      
________________________________________________________________________________________________________________________________________

        Master Boot Record is 512 bytes long
        The Master Boot Record is the same for pretty much all Operating Systems.
        It is located on the first Sector of the Hard Drive, at Cylinder 0, Head 0, Sector 1
*/

typedef struct
{
        u8                              ExecutableCode[446];    // 446 bytes for machine start code    
        PartitionEntry_t        PartitionEntry1;                // 16 bytes for partition entry 1                                      
        PartitionEntry_t        PartitionEntry2;                // 16 bytes for partition entry 2                                      
        PartitionEntry_t        PartitionEntry3;                // 16 bytes for partition entry 3                                      
        PartitionEntry_t        PartitionEntry4;                // 16 bytes for partition entry 4                                      
        u16                                     ExecutableMarker;               // BIOS-Signature (0x55 0xAA)  
} __attribute__((packed)) MBR_Entry_t;


/*
________________________________________________________________________________________________________________________________________
 
        Structure of the VolumeBootRecord                      
________________________________________________________________________________________________________________________________________

        The Volume Boot Record is 512 bytes long
        This information is located in the first sector of every partition.
*/

typedef struct
{
        u8  JumpCode[3];                        // Jump Code + NOP
        s8  OEMName[8];                         // OEM Name            
        u16 BytesPerSector;                     // Bytes Per Sector
        u8  SectorsPerCluster;          // Sectors Per Cluster
        u16 ReservedSectors;            // Reserved Sectors
        u8  NoFATCopies;                        // Number of Copies of FAT
        u16 MaxRootEntries;                     // Maximum Root Directory Entries
        u16 NoSectorsInPartSml32MB;     // Number of Sectors in Partition Smaller than 32 MB
        u8  MediaDescriptor;            // Media Descriptor (0xF8 for Hard Disks)
        u16 SectorsPerFAT;                      // Sectors Per FAT
        u16 SectorsPerTrack;            // Sectors Per Track
        u16 NoHeads;                            // Number of Heads
        u32 NoHiddenSectors;            // Number of Hidden Sectors     in Partition
        u32 NoSectors;                          // Number of Sectors in Partition
        u16     DriveNo;                                // Logical Drive Number of Partition
        u8  ExtendedSig;                        // Extended Signature (0x29)
        u32 SerialNo;                           // Serial Number of the Partition
        s8  VolumeName[11];                     // Volume Name of the Partititon
        s8  FATName[8];                         // FAT Name (FAT16)
        u8  ExecutableCode[446];        // 446 bytes for machine start code    
        u16 ExecutableMarker;           // Executable Marker (0x55 0xAA)       
} __attribute__((packed)) VBR_Entry_t;



/*
________________________________________________________________________________________________________________________________________

        Structure of an directory entry                
________________________________________________________________________________________________________________________________________

        Directory entry is 32 bytes.
*/

typedef struct
{
        s8      Name[8];                                        // 8 bytes name, padded with spaces.
        u8      Extension[3];                           // 3 bytes extension, padded with spaces.
        u8      Attribute;                                      // attribute of the directory entry (unused,archive,read-only,system,directory,volume)
        u8      Reserved[10];                           // reserved bytes within the directory entry.
        u32 DateTime;                                   // date and time of last write access to the file or directory.
        u16 StartCluster;                               // first cluster of the file or directory.
        u32 Size;                                               // size of the file or directory in bytes.
}  __attribute__((packed)) DirEntry_t;

#define SLOT_EMPTY              0x00    // slot has never been used
#define SLOT_E5                 0x05    // the real value is 0xe5
#define SLOT_DELETED            0xE5    // file in this slot deleted

#define ATTR_NONE               0x00    // normal file
#define ATTR_READONLY           0x01    // file is readonly
#define ATTR_HIDDEN                     0x02    // file is hidden
#define ATTR_SYSTEM                     0x04    // file is a system file
#define ATTR_VOLUMELABEL        0x08    // entry is a volume label
#define ATTR_LONG_FILENAME      0x0F    // this is a long filename entry
#define ATTR_SUBDIRECTORY       0x10    // entry is a directory name
#define ATTR_ARCHIVE            0x20    // file is new or modified


/*
________________________________________________________________________________________________________________________________________
 
        Structure of an entry within the fileallocationtable.                  
________________________________________________________________________________________________________________________________________
*/

typedef struct
{
        u16  NextCluster;                               // the next cluster of the file.
} __attribute__((packed)) Fat16Entry_t;

// secial fat entries
#define FAT16_CLUSTER_FREE                      0x0000
#define FAT16_CLUSTER_RESERVED          0x0001
#define FAT16_CLUSTER_USED_MIN          0x0002
#define FAT16_CLUSTER_USED_MAX          0xFFEF
#define FAT16_CLUSTER_ROOTDIR_MIN       0xFFF0
#define FAT16_CLUSTER_ROOTDIR_MAX       0xFFF6
#define FAT16_CLUSTER_BAD                       0xFFF7
#define FAT16_CLUSTER_LAST_MIN          0xFFF8
#define FAT16_CLUSTER_LAST_MAX          0xFFFF

/*****************************************************************************************************************************************/
/*                                                                                                                                                                                                                                                                               */
/*      Global variables needed for read- or write-acces to the FAT16- filesystem.                                                                                                                       */
/*                                                                                                                                                                                                                                                                               */
/*****************************************************************************************************************************************/

#define MBR_SECTOR                                      0x00    // the masterboot record is located in sector 0.
#define DIRENTRY_SIZE                           32              //bytes
#define DIRENTRIES_PER_SECTOR           BYTES_PER_SECTOR/DIRENTRY_SIZE
#define FAT16_BYTES                                     2
#define FAT16_ENTRIES_PER_SECTOR        BYTES_PER_SECTOR/FAT16_BYTES

#define FSTATE_UNUSED   0                                      
#define FSTATE_USED             1

typedef struct
{
        u8      IsValid;                                // 0 means invalid, else valid
        u8      SectorsPerCluster;              // how many sectors does a cluster contain?
        u8      FatCopies;                              // Numbers of copies of the FAT
        u16     MaxRootEntries;                 // Possible number of entries in the root directory.
        u16     SectorsPerFat;                  // how many sectors does a fat16 contain?
        u32 FirstFatSector;                     // sector of the start of the fat
        u32 FirstRootDirSector;         // sector of the rootdirectory
        u32 FirstDataSector;            // sector of the first cluster containing data (cluster2).
        u32 LastDataSector;                     // the last data sector of the partition
} Partition_t;

Partition_t     Partition;                                      // Structure holds partition information

File_t FilePointer[FILE_MAX_OPEN];      // Allocate Memmoryspace for each filepointer used.


/****************************************************************************************************************************************/
/*      Function:               FileDateTime(DateTime_t *);                                                                                                                                                                                     */
/*                                                                                                                                                                                                                                                                              */
/*      Description:    This function calculates the DOS date time from a pointer to a time structure.                                                                          */
/*                                                                                                                                                                                                                                                                              */
/*      Returnvalue:    Returns the DOS date time.                                                                                                                                                                                      */
/****************************************************************************************************************************************/

u32 FileDateTime(DateTime_t * pTimeStruct)
{
        u32 datetime = 0;
        if((pTimeStruct == 0) || !(pTimeStruct->Valid)) return datetime;

        datetime |= (0x0000007FL & (u32)(pTimeStruct->Year - 1980))<<25; // set year
        datetime |= (0x0000000FL & (u32)(pTimeStruct->Month))<<21; // set month
        datetime |= (0x0000001FL & (u32)(pTimeStruct->Day))<<16;
        datetime |= (0x0000001FL & (u32)(pTimeStruct->Hour))<<11;
        datetime |= (0x0000003FL & (u32)(pTimeStruct->Min))<<5;
        datetime |= (0x0000001FL & (u32)(pTimeStruct->Sec/2));
        return datetime;
}


/****************************************************************************************************************************************/
/*      Function:               LockFilePointer();                                                                                                                                                                                                      */
/*                                                                                                                                                                                                                                                                              */
/*      Description:    This function trys to lock a free file pointer.                                                                                                                                         */
/*                                                                                                                                                                                                                                                                              */
/*      Returnvalue:    Returns the Filepointer on success or 0.                                                                                                                                                        */
/****************************************************************************************************************************************/
File_t * LockFilePointer(void)
{
        u8 i;
        File_t * File = 0;
        for(i = 0; i < FILE_MAX_OPEN; i++)
        {
                if(FilePointer[i].State == FSTATE_UNUSED)               // found an unused one                                                                                 
                {
                        File = &FilePointer[i];                                         // set pointer to that entry             
                        FilePointer[i].State = FSTATE_USED;                     // mark it as used
                        break;
                }
        }
        return(File);
}

/****************************************************************************************************************************************/
/*      Function:               UnlockFilePointer(file_t *);                                                                                                                                                                            */
/*                                                                                                                                                                                                                                                                              */
/*      Description:    This function trys to unlock a file pointer.                                                                                                                                            */
/*                                                                                                                                                                                                                                                                              */
/*      Returnvalue:    Returns 1 if file pointer was freed else 0.                                                                                                                                                     */
/****************************************************************************************************************************************/
u8 UnlockFilePointer(File_t * file)
{
        u8 cnt;
        if(file == NULL) return(0);
        for(cnt = 0; cnt < FILE_MAX_OPEN; cnt++)
        {
                if(&FilePointer[cnt] == file)                                           // filepointer to be freed found?
                {
                        file->State = FSTATE_UNUSED;                                                                                                   
                        file->FirstSectorOfFirstCluster = 0;                    // Sectorpointer to the first sector of the first datacluster of the file.
                        file->FirstSectorOfCurrCluster  = 0;
                        file->SectorOfCurrCluster               = 0;                    // Pointer to the cluster which is edited at the moment.
                        file->SectorOfCurrCluster               = 0;                    // The sector which is edited at the moment (cluster_pointer + sector_index).
                        file->ByteOfCurrSector                  = 0;                    // The bytelocation within the current sector (cluster_pointer + sector_index + byte_index).
                        file->Mode                                              = 0;                    // mode of fileoperation (read,write)
                        file->Size                                              = 0;                    // the size of the opend file in bytes.
                        file->Position                                  = 0;                    // pointer to a character within the file 0 < fileposition < filesize
                        file->SectorInCache                     = 0;                    // the last sector read, wich is still in the sectorbuffer.
                        file->DirectorySector                   = 0;                    // the sectorposition where the directoryentry has been made.
                        file->DirectoryIndex                    = 0;                    // the index to the directoryentry within the specified sector.
                        file->Attribute                                 = 0;                    // the attribute of the file opened.
                        file = NULL;
                        return(1);
                }
        }
        return(0);
}

/****************************************************************************************************************************************/
/*      Function:               SeperateDirName(s8*, s8*);                                                                                                                                                                              */
/*                                                                                                                                                                                                                                                                              */
/*      Description:    This function seperates the first dirname from filepath and brings them                                                                                         */
/*                                      into the needed format ('test.txt' -> 'TEST    TXT')                                                                                                                            */
/*                                      The subpath is the pointer to the remaining substring if the filepath                                                                                           */
/*                                                                                                                                                                                                                                                                              */
/*      Returnvalue:    Return NULL on error or pointer to subpath                                                                                                                                                                                                      */
/****************************************************************************************************************************************/
s8* SeperateDirName(const s8 *filepath, s8 *dirname)
{
        s8* subpath = NULL;
        u8 readpointer  = 0;
        u8 writepointer = 0;

        // search subpath from beginning of filepath                                   
        subpath = NULL;
        readpointer     = 0;
        if(filepath[0] == '/') readpointer = 1; // ignore first '/'
        while(subpath == NULL)  // search the filepath until a subpath was found.      
        {
                if(((filepath[readpointer] == 0) || (filepath[readpointer] == '/')))    // if '/' found or end of filepath reached
                {      
                        subpath = (s8*)&filepath[readpointer];                          // store the position of the first "/" found after the beginning of the filenpath
                }
                readpointer++;
        }

        // clear dirname with spaces
        dirname[11] = 0; // terminate dirname
        for(writepointer = 0; writepointer < 11; writepointer++) dirname[writepointer] = ' ';
        writepointer = 0;
        // start seperating the dirname from the filepath.
        readpointer = 0;
        if(filepath[0] == '/') readpointer = 1; // ignore first '/'
        while( &filepath[readpointer] < subpath)
        {
                if(writepointer >= 11) return(NULL);            // dirname to long
                if(filepath[readpointer] == '.')                        // seperating dirname and extension.
                {
                        if(writepointer <= 8)
                        {
                                readpointer++;                                          // next character in filename
                                writepointer = 8;                                       // jump to start of extension
                        }
                        else return(NULL);                                              // dirbasename to long                                                         
                }
                else
                {
                        if((0x60 < filepath[readpointer]) && (filepath[readpointer] < 0x7B))
                        {
                                dirname[writepointer] = (filepath[readpointer] - 0x20);                                 // all characters must be upper case.
                        }
                        else
                        {
                                dirname[writepointer] = filepath[readpointer];
                        }      
                        readpointer++;
                        writepointer++;
                }
        }
        return(subpath);       
}


/**************************************************************************************************************************************+*/
/*      Function:       Fat16ClusterToSector( u16 cluster);                                                                                                                                                                             */
/*                                                                                                                                                                                                                                                                              */
/*      Description:    This function converts a cluster number given by the fat to the corresponding                                                                           */
/*                                      sector that points to the start of the data area that is represented by the cluster number.                                                     */
/*                                                                                                                                                                                                                                                                              */
/*      Returnvalue: The sector number with the data area of the given cluster                                                                                                                          */
/****************************************************************************************************************************************/
u32     Fat16ClusterToSector(u16 cluster)
{
        if(!Partition.IsValid) return 0;
        if (cluster < 2) cluster = 2; // the 0. and 1. cluster in the fat are used for the media descriptor
        return ( (cluster - 2) * Partition.SectorsPerCluster) + Partition.FirstDataSector; // the first data sector     is represented by the 2nd cluster
}

/****************************************************************************************************************************************/
/*      Function:       SectorToFat16Cluster( u32 sector);                                                                                                                                                                              */
/*                                                                                                                                                                                                                                                                              */
/*      Description:    This function converts a given sector number given to the corresponding                                                                                         */
/*                                      cluster number in the fat that represents this data area.                                                                                                                       */
/*                                                                                                                                                                                                                                                                              */
/*      Returnvalue: The cluster number representing the data area of the sector.                                                                                                                       */
/****************************************************************************************************************************************/
u16     SectorToFat16Cluster(u32 sector)
{
        if(!Partition.IsValid) return 0;
        return ((u16)((sector - Partition.FirstDataSector) / Partition.SectorsPerCluster) + 2);
}


/****************************************************************************************************************************************/
/*      Function:       Fat16_Deinit(void);                                                                                                                                                                                                             */
/*                                                                                                                                                                                                                                                                              */
/*      Description:    This function uninitializes the fat 16 api                                                                                                                                                      */
/*                                                                                                                                                                                                                                                                              */
/*      Returnvalue: The function returns "0" on success                                                                                                                                                                        */
/****************************************************************************************************************************************/
u8 Fat16_Deinit(void)
{
        s16 returnvalue = 0;
        u8 cnt;
        // declare the filepointers as unused.
        for(cnt = 0; cnt < FILE_MAX_OPEN; cnt++)
        {
                if(FilePointer[cnt].State == FSTATE_USED)
                {
                        returnvalue += fclose_(&FilePointer[cnt]); // try to close open file pointers
                }
                                                               
        }
        SDC_Deinit();                   // uninitialize interface to sd-card
        Partition.IsValid = 0;  // mark data in partition structure as invalid
        return(returnvalue);
}

/****************************************************************************************************************************************/
/*      Function:               Fat16_Init(void);                                                                                                                                                                                                       */
/*                                                                                                                                                                                                                                                                          */
/*      Description:    This function reads the Masterbootrecord and finds the position of the Volumebootrecord, the FAT and the Rootdir    */
/*                                      and stores the information in global variables.                                                                                                                                     */
/*                                                                                                                                                                                                                                                                          */
/*      Returnvalue:    The function returns "0" if the filesystem is initialized.                                                                                                                      */
/****************************************************************************************************************************************/
u8 Fat16_Init(void)
{      
    u8  cnt     = 0;
        u32     partitionfirstsector;
        VBR_Entry_t *VBR;              
        MBR_Entry_t *MBR;
        File_t *file;
        u8 result = 0;

        SerialPutString("\r\n FAT16 init...");
        Partition.IsValid = 0;

        // declare the filepointers as unused.
        for(cnt = 0; cnt < FILE_MAX_OPEN; cnt++)
        {
                FilePointer[cnt].State = FSTATE_UNUSED;                                        
        }
        // set current file pinter to first position in list
        file = &FilePointer[0];                                                                        
       
        // try to initialise the sd-card.
        if(SD_SUCCESS != SDC_Init())                                                   
        {  
                SerialPutString("SD-Card could not be initialized.");
                result = 1;
                goto end;      
        }

        // SD-Card is initialized successfully
        if(SD_SUCCESS != SDC_GetSector((u32)MBR_SECTOR,file->Cache))    // Read the MasterBootRecord
        {
                SerialPutString("Error reading the MBR.");
                result = 2;
                goto end;      
        }
        MBR = (MBR_Entry_t *)file->Cache;                                               // Enter the MBR using the structure MBR_Entry_t.
        if((MBR->PartitionEntry1.Type == PART_TYPE_FAT16_ST_32_MB) ||
           (MBR->PartitionEntry1.Type == PART_TYPE_FAT16_LT_32_MB) ||
           (MBR->PartitionEntry1.Type == PART_TYPE_FAT16LBA))
        {
                // get sector offset 1st partition
                partitionfirstsector = MBR->PartitionEntry1.NoSectorsBeforePartition;
                // Start of Partition is the Volume Boot Sector
                if(SD_SUCCESS != SDC_GetSector(partitionfirstsector,file->Cache)) // Read the volume boot record
                {
                        SerialPutString("Error reading the VBR.");
                        result = 3;
                        goto end;      
                }                      
        }
        else  // maybe the medium has no partition assuming sector 0 is the vbr
        {
                partitionfirstsector = 0;
        }
       
        VBR = (VBR_Entry_t *) file->Cache;                                              // Enter the VBR using the structure VBR_Entry_t.
        if(VBR->BytesPerSector != BYTES_PER_SECTOR)
        {
                SerialPutString("VBR: Sector size not supported.");
                result = 4;
                goto end;      
        }
        Partition.SectorsPerCluster             = VBR->SectorsPerCluster;                       // Number of sectors per cluster. Depends on the memorysize of the sd-card.
        Partition.FatCopies                     = VBR->NoFATCopies;                                     // Number of fatcopies.
        Partition.MaxRootEntries                = VBR->MaxRootEntries;                          // How many Entries are possible in the rootdirectory (FAT16 allows max. 512 entries).
        Partition.SectorsPerFat                 = VBR->SectorsPerFAT;                           // The number of sectors per FAT.

        /* Calculate the sectorpositon of the FAT, the Rootdirectory and the first Datacluster. */
        // Calculate the position of the FileAllocationTable:
        // Start + # of Reserved Sectors
        Partition.FirstFatSector        =   (u32)(partitionfirstsector + (u32)(VBR->ReservedSectors)); 
        // Calculate the position of the Rootdirectory:
        // Start + # of Reserved Sectors + (# of Sectors Per FAT * # of FAT Copies)                                                    
        Partition.FirstRootDirSector    =   Partition.FirstFatSector + (u32)((u32)Partition.SectorsPerFat*(u32)Partition.FatCopies);
        // Calculate the position of the first datacluster:
        // Start + # of Reserved + (# of Sectors Per FAT * # of FAT Copies) + ((Maximum Root Directory Entries * 32) / Bytes per Sector)               
        Partition.FirstDataSector       =   Partition.FirstRootDirSector + (u32)(Partition.MaxRootEntries>>4);  // assuming 512 Byte Per Sector
        // Calculate the last data sector
        if(VBR->NoSectors == 0)
        {
                SerialPutString("VBR: Bad number of sectors.");
                result = 5;
                goto end;      
        }
        Partition.LastDataSector = Partition.FirstDataSector + VBR->NoSectors - 1;
        // check for FAT16 in VBR of first partition
        if(!((VBR->FATName[0]=='F') && (VBR->FATName[1]=='A') && (VBR->FATName[2]=='T') && (VBR->FATName[3]=='1')&&(VBR->FATName[4]=='6')))
        {
                SerialPutString("VBR: Partition ist not FAT16 type.");
                result = 6;
                goto end;
        }
        Partition.IsValid = 1; // mark data in partition structure as valid
        result = 0;
        end:
        if(result != 0) Fat16_Deinit();
        else SerialPutString("ok");
        return(result);
}



/****************************************************************************************************************************************/
/* Function:    ClearCurrCluster(File_t*);                                                                                                                                                                                      */
/*                                                                                                                                                                                                                                                                              */
/* Description: This function fills the current cluster with 0.                                                                                                                                                 */
/*                                                                                                                                                                                                                                                                              */
/* Returnvalue: The function returns 1 on success else 0.                                                                                                                                                               */
/****************************************************************************************************************************************/
u8 ClearCurrCluster(File_t * file)
{
        u8 retvalue = 1;
        u32 i;
       
        if((!Partition.IsValid) || (file == NULL)) return(0);

        for(i = 0; i < BYTES_PER_SECTOR; i++) file->Cache[i] = 0; // clear file cache
        for(i = 0; i < Partition.SectorsPerCluster; i++)
        {
                file->SectorInCache = file->FirstSectorOfCurrCluster + i;
                if(SD_SUCCESS != SDC_PutSector(file->SectorInCache, file->Cache))
                {
                        Fat16_Deinit();
                        retvalue = 0;
                }
        }
        return(retvalue);      
}

/*****************************************************************************************************************************************/
/* Function:    GetNextCluster(File_t* );                                                                                                                                                                                        */
/*                                                                                                                                                                                                                                                                               */
/* Description: This function finds the next datacluster of the file specified with File *File.                                                                                  */
/*                                                                                                                                                                                                                                                                               */
/* Returnvalue: The function returns the next cluster or 0 if the last cluster has already reached.                                                                                                      */
/*****************************************************************************************************************************************/
u16 GetNextCluster(File_t * file)
{
        u16 cluster = 0;
        u32 fat_byte_offset, sector, byte;
        Fat16Entry_t * fat;
       
        if((!Partition.IsValid) || (file == NULL)) return(cluster);
        // if sector is within the data area
        if((Partition.FirstDataSector <= file->FirstSectorOfCurrCluster)&& (file->FirstSectorOfCurrCluster <= Partition.LastDataSector))
        {
                // determine current file cluster
                cluster = SectorToFat16Cluster(file->FirstSectorOfCurrCluster);
                // calculate byte offset in the fat for corresponding entry
                fat_byte_offset = ((u32)cluster)<<1; // two FAT bytes (16 bits) for every cluster
                // calculate the sector that contains the current cluster within the fat
                sector = Partition.FirstFatSector + ( fat_byte_offset / BYTES_PER_SECTOR);
                // calculate byte offset of the current cluster within that fat sector
                byte = fat_byte_offset % BYTES_PER_SECTOR;
                // read this sector to the file cache
                if(file->SectorInCache != sector)
                {
                        file->SectorInCache = sector;                                           // update sector stored in buffer
                        if(SD_SUCCESS != SDC_GetSector(file->SectorInCache, file->Cache))       // read sector from sd-card
                        {
                                Fat16_Deinit();
                                return (cluster);
                        }              
                }
                // read the next cluster from cache
                fat = (Fat16Entry_t *)(&(file->Cache[byte]));
                cluster = fat->NextCluster;
                // if last cluster fat entry
                if(FAT16_CLUSTER_LAST_MIN <= cluster)
                {
                         cluster = 0;
                }
                else
                {
                        file->FirstSectorOfCurrCluster = Fat16ClusterToSector(cluster);
                        file->SectorOfCurrCluster = 0;
                        file->ByteOfCurrSector = 0;
                }
        }      
        return(cluster);
}


/****************************************************************************************************************************************/
/* Function:    FindNextFreeCluster(File_t *);                                                                                                                                                                          */
/*                                                                                                                                                                                                                                                                              */
/* Description: This function looks in the fat to find the next free cluster                                                                                                                    */
/*                                                                                                                                                                                                                                                                              */
/* Returnvalue: The function returns the cluster number of the next free cluster found within the fat.                                                                  */
/****************************************************************************************************************************************/
u16 FindNextFreeCluster(File_t *file)
{
        u32 fat_sector;                                 // current sector within the fat relative to the first sector of the fat.
        u32     curr_sector;                            // current sector
        u16     fat_entry;                                      // index to an fatentry within the actual sector (256 fatentries are possible within one sector).
        u16     free_cluster    = 0;            // next free cluster number.
        Fat16Entry_t * fat;
       
        if((!Partition.IsValid) || (file == NULL)) return(0);

        // start searching for an empty cluster at the beginning of the fat.
        fat_sector = 0;
        do     
        {
                curr_sector = Partition.FirstFatSector + fat_sector;    // calculate sector to read
                file->SectorInCache = curr_sector;                                              // upate the sector number of file cache.
                if( SD_SUCCESS != SDC_GetSector(file->SectorInCache, file->Cache))              // read sector of fat from sd-card.
                {
                        Fat16_Deinit();
                        return(free_cluster);
                }

                fat = (Fat16Entry_t *)file->Cache;                                              // set fat pointer to file cache

                for(fat_entry = 0; fat_entry < FAT16_ENTRIES_PER_SECTOR; fat_entry++)                                           // look for an free cluster at all entries in this sector of the fat.
                {
                        if(fat[fat_entry].NextCluster == FAT16_CLUSTER_FREE)            // empty cluster found!!
                        {                              
                                fat[fat_entry].NextCluster = FAT16_CLUSTER_LAST_MAX;    // mark this fat-entry as used
                                if(SD_SUCCESS != SDC_PutSector(file->SectorInCache, file->Cache))               // and save the sector at the sd-card.
                                {
                                        Fat16_Deinit();
                                        return(free_cluster);
                                }
                                free_cluster = (u16)(fat_sector * FAT16_ENTRIES_PER_SECTOR + (u32)fat_entry);                          
                                fat_entry = FAT16_ENTRIES_PER_SECTOR;                                   // terminate the search for a free cluster in this sector.
                        }
                }
                fat_sector++;                                                                                                   // continue the search in next fat sector
        // repeat until the end of the fat is  reached and no free cluster has been found so far                                                                       
        }while((fat_sector < Partition.SectorsPerFat) && (!free_cluster));
        return(free_cluster);
}


/****************************************************************************************************************************************************/
/* Function:    s16 fseek_(File_t *, s32 *, u8)                                                                                                                                                                                                         */
/*                                                                                                                                                                                                                                                                                                      */
/* Description: This function sets the pointer of the stream relative to the position                                                                                                                           */
/*                              specified by origin (SEEK_SET, SEEK_CUR, SEEK_END)                                                                                                                                                                      */
/* Returnvalue: Is 1 if seek was successful                                                                                                                                                                                                                                                                     */
/****************************************************************************************************************************************************/
s16 fseek_(File_t *file, s32 offset, s16 origin)
{
        s32             fposition       = 0;
        s16     retvalue        = 1;
       
        if((!Partition.IsValid) || (file == NULL)) return(0);
        switch(origin)
        {
                case SEEK_SET:                          // Fileposition relative to the beginning of the file.
                        fposition = 0; 
                        break;
                case SEEK_END:                          // Fileposition relative to the end of the file.
                        fposition = (s32)file->Size;
                        break;
                case SEEK_CUR:                          // Fileposition relative to the current position of the file.
                default:
                        fposition = file->Position;
                        break;
        }

        fposition += offset;

        if((fposition >= 0) && (fposition <= (s32)file->Size))          // is the pointer still within the file?
        {
                // reset file position to start of the file
                file->FirstSectorOfCurrCluster = file->FirstSectorOfFirstCluster;
                file->SectorOfCurrCluster       = 0;
                file->ByteOfCurrSector          = 0;
                file->Position                          = 0;

                while(file->Position < fposition)       // repeat until the current position is less than target
                {
                        file->Position++;                               // increment file position
                        file->ByteOfCurrSector++;               // next byte in current sector                                                                         
                        if(file->ByteOfCurrSector >= BYTES_PER_SECTOR)                                                                 
                        {
                                file->ByteOfCurrSector = 0;                                                                             // reading at the beginning of new sector.
                                file->SectorOfCurrCluster++;                                                                    // continue reading in next sector
                                if(file->SectorOfCurrCluster >= Partition.SectorsPerCluster)    // if end of cluster is reached, the next datacluster has to be searched in the FAT.
                                {
                                        if(GetNextCluster(file))                                                                        // Sets the clusterpointer of the file to the next datacluster.
                                        {
                                                file->SectorOfCurrCluster = 0;         
                                        }
                                        else // the last cluster was allready reached
                                        {
                                                file->SectorOfCurrCluster--;                                                    // jump back to the ast sector in the last cluster
                                                file->ByteOfCurrSector = BYTES_PER_SECTOR;                              // set ByteOfCurrSector one byte over sector end
                                        }
                                }
                        }      
                }      
        }
        if(file->Position == fposition) retvalue = 0;  
        return(retvalue);
}


/****************************************************************************************************************************************/
/* Function:    u16 DeleteClusterChain(File *file);                                                                                                                                                                             */
/*                                                                                                                                                                                                                                                                              */
/* Description: This function trances along a cluster chain in the fat and frees all clusters visited.                                                                  */
/*                                                                                                                                                                                                                                                                              */
/****************************************************************************************************************************************/
u8 DeleteClusterChain(u16 StartCluster)
{
        u16 cluster;                                                                                                           
        u32 fat_byte_offset, sector, byte;
        Fat16Entry_t * fat;
        u8 buffer[BYTES_PER_SECTOR];
        u32 sector_in_buffer = 0;
        u8 repeat = 0;

        if(!Partition.IsValid) return 0;

        cluster = StartCluster; // init chain trace
        // calculate byte offset in the fat for corresponding entry
        fat_byte_offset = ((u32)cluster)<<1; // two FAT bytes (16 bits) for every cluster
        // calculate the sector that contains the current cluster within the fat
        sector = Partition.FirstFatSector + ( fat_byte_offset / BYTES_PER_SECTOR);
        // calculate byte offset of the current cluster within that fat sector
        byte = fat_byte_offset % BYTES_PER_SECTOR;
        do     
        {
                if(sector != sector_in_buffer)
                {
                        // read this sector to buffer
                        sector_in_buffer = sector;
                        if(SD_SUCCESS != SDC_GetSector(sector_in_buffer, buffer)) return 0;     // read sector from sd-card
                }              
                // read the next cluster from cache
                fat = (Fat16Entry_t *)(&(buffer[byte]));
                cluster = fat->NextCluster;
                if((FAT16_CLUSTER_USED_MIN <= cluster) && (cluster <= FAT16_CLUSTER_USED_MAX) ) repeat = 1;
                else repeat = 0;

                fat->NextCluster =      FAT16_CLUSTER_FREE; // mark current cluster as free
                // calculate byte offset in the fat for corresponding entry
                fat_byte_offset = ((u32)cluster)<<1; // two FAT bytes (16 bits) for every cluster
                // calculate the sector that contains the current cluster within the fat
                sector = Partition.FirstFatSector + ( fat_byte_offset / BYTES_PER_SECTOR);
                // calculate byte offset of the current cluster within that fat sector
                byte = fat_byte_offset % BYTES_PER_SECTOR;
                // if new sector is not the sector in buffer or the last cluster in the chain was traced
                if((sector != sector_in_buffer) || !repeat)
                {       // write sector in buffer
                        if(SD_SUCCESS != SDC_PutSector(sector_in_buffer,buffer)) return 0;     
                }
        }
        while(repeat);

        return 1;
}


/****************************************************************************************************************************************/
/* Function:    u16 AppendCluster(File *file);                                                                                                                                                                                  */
/*                                                                                                                                                                                                                                                                              */
/* Description: This function looks in the fat to find the next free cluster and appends it to the file.                                                                */
/*                                                                                                                                                                                                                                                                              */
/* Returnvalue: The function returns the appened cluster number or 0 of no cluster was appended.                                                                                                                                                */
/****************************************************************************************************************************************/
u16 AppendCluster(File_t *file)
{
        u16 last_cluster, new_cluster = 0;                                                                                                             
        u32 fat_byte_offset, sector, byte;
        Fat16Entry_t * fat;
       
        if((!Partition.IsValid) || (file == NULL)) return(new_cluster);

        new_cluster = FindNextFreeCluster(file);        // the next free cluster found on the disk.
        if(new_cluster)
        {       // A free cluster was found and can be added to the end of the file.
                fseek_(file, 0, SEEK_END);                                                                                                      // jump to the end of the file
                last_cluster = SectorToFat16Cluster(file->FirstSectorOfCurrCluster);            // determine current file cluster
                fat_byte_offset = ((u32)last_cluster)<<1;
                sector = Partition.FirstFatSector + ( fat_byte_offset / BYTES_PER_SECTOR);
                byte = fat_byte_offset % BYTES_PER_SECTOR;

                if(file->SectorInCache != sector)
                {
                        file->SectorInCache = sector;                                           // update sector stored in buffer
                        if(SD_SUCCESS != SDC_GetSector(file->SectorInCache, file->Cache))       // read sector from sd-card
                        {
                                Fat16_Deinit();
                                return(0);
                        }      
                }                                            
                fat = (Fat16Entry_t *)(&(file->Cache[byte]));
                fat->NextCluster = new_cluster;                                                 // append the free cluster to the end of the file in the FAT.
                if(SD_SUCCESS != SDC_PutSector(file->SectorInCache, file->Cache))               // save the modified sector to the FAT.
                {
                        Fat16_Deinit();
                        return(0);
                }
                file->FirstSectorOfCurrCluster = Fat16ClusterToSector(new_cluster);
                file->SectorOfCurrCluster = 0;
                file->ByteOfCurrSector = 0;
        }
        return(new_cluster);
}

/****************************************************************************************************************************************************/
/* Function:    DirectoryEntryExist(s8 *, u8, u8, File_t *)                                                                                                                                                                                     */
/*                                                                                                                                                                                                                                                                                                      */
/* Description: This function searches all possible dir entries until the file or directory is found or the end of the directory is reached                     */
/*                                                                                                                                                                                                                                                                                                      */
/* Returnvalue: This function returns 1 if the directory entry specified was found.                                                                                                                                     */
/****************************************************************************************************************************************************/
u8 DirectoryEntryExist(s8 *dirname, u8 attribfilter, u8 attribmask, File_t *file)
{
        u32             dir_sector, max_dir_sector, curr_sector;
        u16     dir_entry = 0;

        u16     end_of_directory_not_reached = 0;
        u8              i = 0;
        u8      direntry_exist = 0;
        DirEntry_t * dir;

        // if incomming pointers are useless return immediatly
        if((!Partition.IsValid) || (file == NULL) || (dirname == NULL)) return(direntry_exist);

        // dir entries can be searched only in filesclusters that have
        // a corresponding dir entry with adir-flag set in its attribute
        // or direct within the root directory area
       
        file->FirstSectorOfFirstCluster = 0;
        // no current directory exist therefore assume searching in the root
        if(file->DirectorySector == 0)
        {
                max_dir_sector = (Partition.MaxRootEntries * DIRENTRY_SIZE)/BYTES_PER_SECTOR;
                file->FirstSectorOfFirstCluster = Partition.FirstRootDirSector;
        }
        // within the root directory area we can read sectors sequentially until the end of this area
        else if((Partition.FirstRootDirSector <= file->DirectorySector) && (file->DirectorySector < Partition.FirstDataSector))
        {
                max_dir_sector = (Partition.MaxRootEntries * DIRENTRY_SIZE)/BYTES_PER_SECTOR;
        }
        // within the data clusters we can read sectors sequentially only within the cluster  
        else if((Partition.FirstDataSector <= file->DirectorySector) && (file->DirectorySector <= Partition.LastDataSector))
        {
                max_dir_sector = Partition.SectorsPerCluster;                           // limit max secters before next cluster
        }
        else return (direntry_exist); // bad sector range for directory sector of the file
        // if search area is not defined yet
        if(file->FirstSectorOfFirstCluster == 0)
        {
                // check if the directory entry of current file is existent and has the dir-flag set
                file->SectorInCache = file->DirectorySector;                            // update the sector number of file cache.
                if(SD_SUCCESS != SDC_GetSector(file->SectorInCache, file->Cache))// read in the sector.
                {
                        Fat16_Deinit();
                        return(direntry_exist);
                }
                dir = (DirEntry_t *)file->Cache;                                                        // set pointer to directory
                switch((u8)dir[file->DirectoryIndex].Name[0])                                   // check if current directory exist
                {
                        case SLOT_EMPTY:
                        case SLOT_DELETED:
                                // the directrory pointer of this file points to a deleted or not existen directory
                                // therefore no file or subdirectory can be created
                                return (direntry_exist);
                                break;
                        default:        // and is a real directory
                                if((dir[file->DirectoryIndex].Attribute & ATTR_SUBDIRECTORY) != ATTR_SUBDIRECTORY)
                                {       // current file is not a directory therefore no file or subdirectory can be created here
                                        return (direntry_exist);
                                }
                                break;
                }
                file->FirstSectorOfFirstCluster = Fat16ClusterToSector(dir[file->DirectoryIndex].StartCluster);
        }

        // update current file data area position to start of first cluster
        file->FirstSectorOfCurrCluster  = file->FirstSectorOfFirstCluster;
        file->SectorOfCurrCluster               = 0;           
        file->ByteOfCurrSector                  = 0;

        do // loop over all data clusters of the current directory entry
        {      
                dir_sector = 0; // reset sector counter within a new cluster
                do // loop over all sectors of a cluster or all sectors of the root directory
                {      
                        curr_sector = file->FirstSectorOfCurrCluster + dir_sector;      // calculate sector number
                        file->SectorInCache = curr_sector;                                                      // upate the sector number of file cache.
                        if(SD_SUCCESS != SDC_GetSector(file->SectorInCache, file->Cache))// read the sector
                        {
                                Fat16_Deinit();
                                return(direntry_exist);
                        }
                        dir = (DirEntry_t *)file->Cache;                                                        // set pointer to directory
                        // search all directory entries within that sector
                        for(dir_entry = 0; dir_entry < DIRENTRIES_PER_SECTOR; dir_entry++)
                        {   // check for existing dir entry
                                switch((u8)dir[dir_entry].Name[0])
                                {
                                        case SLOT_EMPTY:
                                        case SLOT_DELETED:
                                                // ignore empty or deleted dir entries
                                                break;
                                        default:
                                                // if existing check attributes before names are compared will safe performance
                                                if ((dir[dir_entry].Attribute & attribmask) != attribfilter) break; // attribute must match
                                                // then compare the name to the giveb dirname (first 11 characters include 8 chars of basename and 3 chars extension.)
                                                i = 0;
                                                while((i < 11) && (dir[dir_entry].Name[i] == dirname[i])) i++;
                                                if (i < 10) break; // names does not match
                                                // if dirname and attribute have matched
                                                file->Attribute = dir[dir_entry].Attribute; // store attribute of found dir entry
                                                file->FirstSectorOfFirstCluster = Fat16ClusterToSector(dir[dir_entry].StartCluster); // set sector of first data cluster                                                       
                                                file->FirstSectorOfCurrCluster = file->FirstSectorOfFirstCluster;
                                                file->SectorOfCurrCluster = 0;
                                                file->ByteOfCurrSector = 0;
                                                file->DirectorySector = curr_sector; // current sector
                                                file->DirectoryIndex  = dir_entry; // current direntry in current sector
                                                file->Size = dir[dir_entry].Size;      
                                                direntry_exist = 1; // mark as found   
                                                dir_entry = DIRENTRIES_PER_SECTOR;      // stop for-loop       
                                } // end of first byte of name check
                        }
                        dir_sector++; // search next sector
                // stop if we reached the end of the cluster or the end of the root dir
                }while((dir_sector < max_dir_sector) && (!direntry_exist));

                // if we are seaching in the data area and the file not found in this cluster so take next cluster.
                if(!direntry_exist && ( Partition.FirstDataSector <= file->FirstSectorOfCurrCluster))                                                                                  
                {
                        end_of_directory_not_reached = GetNextCluster(file);  // updates File->FirstSectorOfCurrCluster
                }
        }while((end_of_directory_not_reached) && (!direntry_exist)); // repeat until a next cluster exist an no
        return(direntry_exist);
}


/****************************************************************************************************************************************/
/*      Function:               CreateDirectoryEntry(s8 *, u16, File_t *)                                                                                                                                                       */
/*                                                                                                                                                                                                                                                                              */
/*      Description:    This function looks for the next free position in the directory and creates an entry.                                                           */
/*                                      The type of an directory entry is specified by the file attribute.                                                                                                      */
/*                                                                                                                                                                                                                                                                              */
/*      Returnvalue:    Return 0 on error                                                                                                                                                                                                       */
/****************************************************************************************************************************************/
u8 CreateDirectoryEntry(s8 *dirname, u8 attrib, File_t *file)
{
        u32 dir_sector, max_dir_sector, curr_sector;
        u16 dir_entry   = 0;
        u16 subdircluster, dircluster = 0;
        u16 end_of_directory_not_reached = 0;
        u8      i                       = 0;
        u8      retvalue        = 0;   
        DirEntry_t *dir;

        if((!Partition.IsValid) || (file == NULL) || (dirname == NULL)) return (retvalue);
        // It is not checked here that the dir entry that should be created is already existent!
       
        // Dir entries can be created only in file-clusters that have
        // the dir-flag set in its attribute or within the root directory
       
        file->FirstSectorOfFirstCluster = 0;
        // no current directory exist therefore assume creating in the root
        if(file->DirectorySector == 0)
        {
                max_dir_sector = (Partition.MaxRootEntries * DIRENTRY_SIZE)/BYTES_PER_SECTOR;
                dircluster = 0;
                file->FirstSectorOfFirstCluster = Partition.FirstRootDirSector;
        }
        // within the root directory area we can read sectors sequentially until the end of this area
        else if((Partition.FirstRootDirSector <= file->DirectorySector) && (file->DirectorySector < Partition.FirstDataSector))
        {
                max_dir_sector = (Partition.MaxRootEntries * DIRENTRY_SIZE)/BYTES_PER_SECTOR;
        }
        // within the data clusters we can read sectors sequentially only within the cluster  
        else if((Partition.FirstDataSector <= file->DirectorySector) && (file->DirectorySector <= Partition.LastDataSector))
        {
                max_dir_sector = Partition.SectorsPerCluster;
        }
        else return (retvalue); // bad sector range for directory sector of the file
        // if search area is not defined yet
        if(file->FirstSectorOfFirstCluster == 0)
        {
            // check if the directory entry of current file is existent and has the dir-flag set
                file->SectorInCache = file->DirectorySector;                            // update the sector number of file cache.
                if(SD_SUCCESS != SDC_GetSector(file->SectorInCache, file->Cache))// read in the sector.
                {
                        Fat16_Deinit();
                        return(retvalue);
                }              
                dir = (DirEntry_t *)file->Cache;                                                        // set pointer to directory
                switch((u8)dir[file->DirectoryIndex].Name[0])                                   // check if current directory exist
                {
                        case SLOT_EMPTY:
                        case SLOT_DELETED:
                                return (retvalue);
                                break;
                        default:        // and is a real directory
                                if((dir[file->DirectoryIndex].Attribute & ATTR_SUBDIRECTORY) != ATTR_SUBDIRECTORY)
                                {       // current file is not a directory therefore no file or subdirectory can be created here
                                        return (retvalue);
                                }
                                break;
                }
                dircluster = dir[file->DirectoryIndex].StartCluster;
                file->FirstSectorOfFirstCluster = Fat16ClusterToSector(dircluster);
        }
               
        subdircluster = FindNextFreeCluster(file);      // get the next free cluster on the disk and mark it as used.
        if(subdircluster)
        {
                file->FirstSectorOfCurrCluster  = file->FirstSectorOfFirstCluster;
                file->SectorOfCurrCluster               = 0;
                do // loop over all clusters of current directory
                {      
                        dir_sector = 0; // reset sector counter within a new cluster
                        do // loop over all sectors of a cluster or all sectors of the root directory
                        {
                                curr_sector = file->FirstSectorOfCurrCluster + dir_sector;      // calculate sector number                                                                     
                                file->SectorInCache = curr_sector;                                                      // upate the sector number of file cache.
                                if(SD_SUCCESS != SDC_GetSector(file->SectorInCache, file->Cache))// read in the sector.
                                {
                                        Fat16_Deinit();
                                        return(retvalue);
                                }              
                                dir = (DirEntry_t *)file->Cache;                                                        // set pointer to directory
                                // search all directory entries of a sector
                                for(dir_entry = 0; dir_entry < DIRENTRIES_PER_SECTOR; dir_entry++)
                                {       // check if current direntry is available
                                        if(((u8)dir[dir_entry].Name[0] == SLOT_EMPTY) || ((u8)dir[dir_entry].Name[0] == SLOT_DELETED))
                                        {       // a free direntry was found    
                                                for(i = 0; i < 11; i++) dir[dir_entry].Name[i] = dirname[i];            // Set dir name
                                                dir[dir_entry].Attribute    = attrib;                                                           // Set the attribute of the new directoryentry.
                                                dir[dir_entry].StartCluster = subdircluster;                                            // copy the location of the first datacluster to the directoryentry.
                                                dir[dir_entry].DateTime         = FileDateTime(&SystemTime);                    // set date/time
                                                dir[dir_entry].Size             = 0;                                                                    // the new createted file has no content yet.
                                                if(SD_SUCCESS != SDC_PutSector(file->SectorInCache, file->Cache))       // write back to card
                                                {
                                                        Fat16_Deinit();
                                                        return(retvalue);
                                                }
                                                file->FirstSectorOfFirstCluster = Fat16ClusterToSector(subdircluster);  // Calculate absolute sectorposition of first datacluster.
                                                file->FirstSectorOfCurrCluster  = file->FirstSectorOfFirstCluster;      // Start reading the file with the first sector of the first datacluster.
                                                file->SectorOfCurrCluster               = 0;                                                            // reset sector of cureen cluster
                                                file->ByteOfCurrSector                  = 0;                                                            // reset the byte location within the current sector
                                                file->Attribute                                 = attrib;                                               // set file attribute to dir attribute
                                                file->Size                                              = 0;                                                        // new file has no size
                                                file->DirectorySector                   = curr_sector;
                                                file->DirectoryIndex                    = dir_entry;
                                                if((attrib & ATTR_SUBDIRECTORY) == ATTR_SUBDIRECTORY)                           // if a new directory was created then initilize the data area          
                                                {      
                                                        ClearCurrCluster(file); // fill cluster with zeros
                                                        file->SectorInCache = file->FirstSectorOfFirstCluster;
                                                        if(SD_SUCCESS != SDC_GetSector(file->SectorInCache, file->Cache))// read in the sector.
                                                        {
                                                                Fat16_Deinit();
                                                                return(retvalue);
                                                        }      
                                                        dir = (DirEntry_t *)file->Cache;
                                                        // create direntry "." to current dir
                                                        dir[0].Name[0] = 0x2E;
                                                        for(i = 1; i < 11; i++) dir[0].Name[i] = ' ';
                                                        dir[0].Attribute = ATTR_SUBDIRECTORY;
                                                        dir[0].StartCluster = subdircluster;
                                                        dir[0].DateTime = 0;
                                                        dir[0].Size = 0;
                                                        // create direntry ".." to the upper dir
                                                        dir[1].Name[0] = 0x2E;
                                                        dir[1].Name[1] = 0x2E;
                                                        for(i = 2; i < 11; i++) dir[1].Name[i] = ' ';
                                                        dir[1].Attribute = ATTR_SUBDIRECTORY;
                                                        dir[1].StartCluster = dircluster;
                                                        dir[1].DateTime = 0;
                                                        dir[1].Size = 0;
                                                        if(SD_SUCCESS != SDC_PutSector(file->SectorInCache, file->Cache))// read in the sector.
                                                        {
                                                                Fat16_Deinit();
                                                                return(retvalue);
                                                        }              
                                                }      
                                                retvalue = 1;
                                                dir_entry = DIRENTRIES_PER_SECTOR;      // stop for-loop       
                                        }
                                }                      
                                dir_sector++; // search next sector
                        // stop if we reached the end of the cluster or the end of the root dir
                        }while((dir_sector < max_dir_sector) && (!retvalue));
                       
                        // if we are seaching in the data area and the file not found in this cluster so take next cluster.
                        if(!retvalue && ( Partition.FirstDataSector <= file->FirstSectorOfCurrCluster))                                                                                
                        {
                                end_of_directory_not_reached = GetNextCluster(file);  // updates File->FirstSectorOfCurrCluster
                        }
                }while((end_of_directory_not_reached) && (!retvalue));
                // Perhaps we are at the end of the last cluster of a directory file an have no free direntry found.
                // Then we would need to add a cluster to that file and create the new direntry there.
                // This code is not implemented yet, because its occurs only if more that 32*32=1024 direntries are
                // within a subdirectory of root.
        }
        return(retvalue);       // return 1 if file has been created otherwise return 0.
}

/********************************************************************************************************************************************/
/*      Function:               FileExist(const s8* filename, u8 attribfilter, u8 attribmask, File_t *file);                                                                                    */
/*                                                                                                                                                                                                                                                                                      */
/*      Description:    This function looks for the specified file including its subdirectories beginning                                                                               */
/*                                      in the rootdirectory of the drive. If the file is found the Filepointer properties are                                                                  */
/*                                      updated.                                                                                                                                                                                                                                */
/*                                                                                                                                                                                                                                                                                      */
/*      Returnvalue:    1 if file is found else 0.                                                                                                                                                                                              */
/********************************************************************************************************************************************/
u8 FileExist(const s8* filename, const u8 attribfilter, const u8 attribmask, File_t *file)
{
        s8* path = 0;
        s8* subpath = 0;
        u8 af, am, file_exist = 0;
        s8 dirname[12]; // 8+3 + temination character

        // if incomming pointers are useless return immediatly
        if ((filename == NULL) || (file == NULL) || (!Partition.IsValid)) return 0;

        // trace along the filepath
        path = (s8*)filename;                                                           // start a the beginning of the filename string
        file->DirectorySector = 0;                                                              // start at RootDirectory with file search
        file->DirectoryIndex = 0;
        // as long as the file was not found and the remaining path is not empty
        while((*path != 0) && !file_exist)
        {       // separate dirname and subpath from filepath string
                subpath = SeperateDirName(path, dirname);
                if(subpath != NULL)
                {      
                        if(*subpath == 0)        
                        {       // empty subpath indicates last element of dir chain
                                af = attribfilter;
                                am = attribmask;
                        }
                        else  // it must be a subdirectory and no volume label
                        {
                                af = ATTR_SUBDIRECTORY;
                                am = ATTR_SUBDIRECTORY|ATTR_VOLUMELABEL;
                        }
                        if(!DirectoryEntryExist(dirname, af, am, file))
                        {
                                return (file_exist); // subdirectory does not exist
                        }
                        else
                        {      
                                if (*subpath == 0)
                                {
                                        file_exist = 1; // last element of path chain was found with the given attribute filter
                                }
                        }
                }
                else // error seperating the subpath
                {
                        return file_exist; // bad subdir format
                }
                path = subpath;
                subpath = 0;
        }
        return (file_exist);
}


/********************************************************************************************************************************************/
/*      Function:               FileCreate(const s8* filename, u8 attrib, File_t *file);                                                                                                                                */
/*                                                                                                                                                                                                                                                                                      */
/*      Description:    This function looks for the specified file including its subdirectories beginning                                                                               */
/*                                      in the rootdirectory of the partition. If the file is found the Filepointer properties are                                                              */
/*                                      updated. If file or its subdirectories are not found they will be created                                                                                               */                                                                                                             
/*                                                                                                                                                                                                                                                                                      */
/*      Returnvalue:    1 if file was created else 0.                                                                                                                                                                                   */
/********************************************************************************************************************************************/
u8 FileCreate(const s8* filename, const u8 attrib, File_t *file)
{
        s8 *path = 0;
        s8 *subpath = 0;
        u8 af, am, file_created = 0;
        s8 dirname[12];

        // if incomming pointers are useless return immediatly
        if ((filename == NULL) || (file == NULL) || (!Partition.IsValid)) return 0;

        // trace along the filepath
        path = (s8*)filename;                                                                   // start a the beginning of the filename string
        file->DirectorySector = 0;                                                              // start at RootDirectory with file search
        file->DirectoryIndex = 0;
        // as long as the file was not created and the remaining file path is not empty
        while((*path != 0) && !file_created)
        {   // separate dirname and subpath from filepath string
                subpath = SeperateDirName(path, dirname);
                if(subpath != NULL)
                {
                        if(*subpath == 0)        
                        {       // empty subpath indicates last element of dir chain
                                af = ATTR_NONE;
                                am = ATTR_SUBDIRECTORY|ATTR_VOLUMELABEL;  // any file that is no subdir or volume label
                        }
                        else  // it must be a subdirectory and no volume label
                        {
                                af = ATTR_SUBDIRECTORY;
                                am = ATTR_SUBDIRECTORY|ATTR_VOLUMELABEL;
                        }
                        if(!DirectoryEntryExist(dirname, af, am, file)) // if subdir or file is not existent
                        {  // try to create subdir or file
                                if(*subpath == 0) af = attrib; // if last element in dir chain take the given attribute
                                if(!CreateDirectoryEntry(dirname, af, file))
                                {       // could not be created
                                        return(file_created);  
                                }
                                else if (*subpath == 0) file_created = 1; // last element of path chain was created
                        }
                }
                else // error seperating the subpath
                {
                        return file_created; // bad subdir format
                }
                path = subpath;
                subpath = 0;
        }
        return (file_created);
}


/********************************************************************************************************************************************/
/*      Function:               File_t * fopen_(s8* filename, s8 mode);                                                                                                                                                                 */
/*                                                                                                                                                                                                                                                                                      */
/*      Description:    This function looks for the specified file in the rootdirectory of the drive. If the file is found the number of the    */
/*                                      corrosponding filepointer is returned. Only modes 'r' (reading) and 'a' append are implemented yet.                                             */
/*                                                                                                                                                                                                                                                                                      */
/*      Returnvalue:    The filepointer to the file or 0 if faild.                                                                                                                                                              */
/********************************************************************************************************************************************/
File_t * fopen_(const s8 *filename, const s8 mode)
{                      
        File_t *file    = 0;
       
        if((!Partition.IsValid) || (filename == 0)) return(file);

        // Look for an unused filepointer in the file pointer list?
        file = LockFilePointer();
        // if no unused file pointer was found return 0
        if(file == NULL) return(file);

        // now we have found a free filepointer and claimed it
        // so let initiate its property values
        file->FirstSectorOfFirstCluster = 0;            // Sectorpointer to the first sector of the first datacluster of the file.
        file->FirstSectorOfCurrCluster  = 0;            // Pointer to the cluster which is edited at the moment.
        file->SectorOfCurrCluster               = 0;            // The sector which is edited at the moment (cluster_pointer + sector_index).
        file->ByteOfCurrSector                  = 0;            // The bytelocation within the current sector (cluster_pointer + sector_index + byte_index).
        file->Mode                                              = mode;         // mode of fileoperation (read,write)
        file->Size                                              = 0;            // the size of the opened file in bytes.
        file->Position                                  = 0;            // pointer to a byte within the file 0 < fileposition < filesize
        file->SectorInCache                             = 0;            // the last sector read, wich is still in the sectorbuffer.
        file->DirectorySector                   = 0;            // the sectorposition where the directoryentry has been made.
        file->DirectoryIndex                    = 0;            // the index to the directoryentry within the specified sector.
        file->Attribute                                 = 0;            // the attribute of the file opened.

        // check if a real file (no directory) to the given filename exist
        if(FileExist(filename, ATTR_NONE, ATTR_SUBDIRECTORY|ATTR_VOLUMELABEL, file))
        {  // file exist
                switch(mode)  // check mode
                {
                        case 'a':       // if mode is: append to file
                                if((file->Attribute & ATTR_READONLY) == ATTR_READONLY)
                                {       // file is marked as readonly --> do not open this file
                                        fclose_(file);
                                        file = NULL;
                                }
                                else
                                {       // file is not marked as read only --> goto end of file
                                        fseek_(file, 0, SEEK_END);              // point to the end of the file
                                }
                                break;
                        case 'w':       // if mode is: write to file
                                if((file->Attribute & ATTR_READONLY) == ATTR_READONLY)
                                {       // file is marked as readonly --> do not open this file
                                        fclose_(file);
                                        file = NULL;
                                }
                                else
                                {       // file is not marked as read only --> goto start of file
                                        // free all clusters of that file
                                        DeleteClusterChain(SectorToFat16Cluster(file->FirstSectorOfFirstCluster));
                                        // mar an empy cluster as the last one and store the corresponding sector
                                        file->FirstSectorOfFirstCluster = Fat16ClusterToSector(FindNextFreeCluster(file));
                                        file->FirstSectorOfCurrCluster = file->FirstSectorOfFirstCluster;
                                        file->SectorOfCurrCluster = 0;
                                        file->ByteOfCurrSector = 0;
                                        file->Size = 0;
                                        file->Position = 0;
                                        fseek_(file, 0, SEEK_SET);
                                }
                                break;
                        case 'r':       // if mode is: read from file
                                // goto end of file
                                fseek_(file, 0, SEEK_SET);
                                break;
                        default: // other modes are not supported
                                fclose_(file);
                                file = NULL;
                        break;
                }
                return(file);  
        }
        else // file does not exist
        {
                switch(mode)  // check mode
                {
                        case 'a':
                        case 'w': // if mode is write or append
                                // try to create the file
                                if(!FileCreate(filename, ATTR_ARCHIVE, file))
                                { // if it could not be created
                                        fclose_(file);
                                        file = NULL;
                                }
                                break;
                        case 'r': // else opened for 'r'
                        default:  // of unsupported mode
                                fclose_(file);
                                file = NULL;
                                break; 
                }
                return(file);                  
        }
        // we should never come to this point
        fclose_(file);
        file = NULL;
        return(file);
}

/****************************************************************************************************************************************************/
/* Function:    fflush_(File *);                                                                                                                                                                                                                                        */
/*                                                                                                                                                                                                                                                                                                      */
/* Description: This function writes the data already in the buffer but not yet written to the file.                                                                                            */
/*                                                                                                                                                                                                                                                                                                      */
/* Returnvalue: 0 on success EOF on error                                                                                                                                                                                                                       */
/****************************************************************************************************************************************************/
s16     fflush_(File_t *file)
{
        DirEntry_t *dir;       
       
        if((file == NULL) || (!Partition.IsValid)) return (EOF);
               
        switch(file->Mode)
        {
                case 'a':
                case 'w':
                        if(file->ByteOfCurrSector > 0)                                                                          // has data been added to the file?            
                        {
                                if(SD_SUCCESS != SDC_PutSector(file->SectorInCache, file->Cache))// save the data still in the buffer
                                {
                                        Fat16_Deinit();
                                        return(EOF);   
                                }                                      
                        }
                        file->SectorInCache     = file->DirectorySector;
                        if(SD_SUCCESS != SDC_GetSector(file->SectorInCache, file->Cache))                                       // read the directory entry for this file.
                        {
                                Fat16_Deinit();
                                return(EOF);    
                        }
                       
                        dir = (DirEntry_t *)file->Cache;
                        dir[file->DirectoryIndex].Size = file->Size;                                            // update file size
                        dir[file->DirectoryIndex].DateTime = FileDateTime(&SystemTime);         // update date time
                        if(SD_SUCCESS != SDC_PutSector(file->SectorInCache, file->Cache))       // write back to sd-card
                        {
                                Fat16_Deinit();
                                return(EOF);
                        }
                        break;
                case 'r':
                default:
                        return(EOF);
                        break;

        }
        return(0);
}

/****************************************************************************************************************************************/
/*      Function:               fclose_(File *file);                                                                                                                                                                                            */
/*                                                                                                                                                                                                                                                                              */
/*      Description:    This function closes the open file by writing the remaining data                                                                                                        */
/*                                      from the buffer to the device and entering the filesize in the directory entry.                                                                         */
/*                                                                                                                                                                                                                                                                              */
/*      Returnvalue:    0 on success EOF on error                                                                                                                                                                                       */
/****************************************************************************************************************************************/
s16 fclose_(File_t *file)
{
        s16 returnvalue = EOF;

        if(file == NULL) return(returnvalue);
        returnvalue = fflush_(file);
        UnlockFilePointer(file);
        return(returnvalue);
}

/********************************************************************************************************************************************/
/*      Function:               fgetc_(File *file);                                                                                                                                                                                                             */
/*                                                                                                                                                                                                                                                                                      */
/*      Description:    This function reads and returns one character from the specified file. Is the end of the actual sector reached the              */
/*                                      next sector of the cluster is read. If the last sector of the cluster read the next cluster will be searched in FAT.    */
/*                                                                                                                                                                                                                                                                                      */
/*      Returnvalue:    The function returns the character read from the specified memorylocation as u8 casted to s16 or EOF.                                   */
/********************************************************************************************************************************************/
s16 fgetc_(File_t *file)
{      
        s16 c = EOF;
        u32 curr_sector;
       
        if( (!Partition.IsValid) || (file == NULL)) return(c);
        // if the end of the file is not reached, get the next character.
        if((0 < file->Size) && ((file->Position+1) < file->Size) )                                                             
        {
                curr_sector  = file->FirstSectorOfCurrCluster;          // calculate the sector of the next character to be read.
                curr_sector += file->SectorOfCurrCluster;                      
       
                if(file->SectorInCache != curr_sector)
                {
                        file->SectorInCache = curr_sector;
                        if(SD_SUCCESS != SDC_GetSector(file->SectorInCache,file->Cache))
                        {
                                Fat16_Deinit();
                                return(c);
                        }              
                }      
                c = (s16) file->Cache[file->ByteOfCurrSector];
                file->Position++;                                                                       // increment file position
                file->ByteOfCurrSector++;                                                       // goto next byte in sector            
                if(file->ByteOfCurrSector >= BYTES_PER_SECTOR)          // if end of sector
                {
                        file->ByteOfCurrSector = 0;                                             //  reset byte location
                        file->SectorOfCurrCluster++;                                    //      next sector
                        if(file->SectorOfCurrCluster >= Partition.SectorsPerCluster)    // if end of cluster is reached, the next datacluster has to be searched in the FAT.
                        {
                               
                                if(GetNextCluster(file))                                                                                // Sets the clusterpointer of the file to the next datacluster.
                                {
                                        file->SectorOfCurrCluster = 0;                                                          // start reading new cluster at first sector of the cluster.
                                }
                                else // the last cluster was allready reached
                                {
                                        file->SectorOfCurrCluster--;                                                    // jump back to the last sector in the last cluster
                                        file->ByteOfCurrSector = BYTES_PER_SECTOR;                              // set ByteOfCurrSector one byte over sector end
                                }
                        }
                }
        }
        return(c);
}

/********************************************************************************************************************************************/
/*      Function:               fputc_( const s8 c, File *file);                                                                                                                                                                                */
/*                                                                                                                                                                                                                                                                                      */
/*      Description:    This function writes a byte to the specified file and takes care of writing the necessary FAT- Entries.                                 */
/*                                      next sector of the cluster is read. If the last sector of the cluster read the next cluster will be searched in FAT.    */
/*                                                                                                                                                                                                                                                                                      */
/*      Returnvalue:    The function returns the character written to the stream or EOF on error.                                                                                               */
/********************************************************************************************************************************************/
s16 fputc_(const s8 c, File_t *file)
{      
        u32 curr_sector  = 0;
       
        if((!Partition.IsValid) || (file == NULL)) return(EOF);

        // If file position equals to file size, then the end of file has reached.
        // In this chase it has to be checked that the ByteOfCurrSector is BYTES_PER_SECTOR
        // and a new cluster should be appended.
        if((file->Position >= file->Size) && (file->ByteOfCurrSector >= BYTES_PER_SECTOR))
        {
                if(!AppendCluster(file)) return(EOF);
        }

        curr_sector  = file->FirstSectorOfCurrCluster;
        curr_sector += file->SectorOfCurrCluster;
        if(file->SectorInCache != curr_sector)
        {
                file->SectorInCache = curr_sector;
                if(SD_SUCCESS != SDC_GetSector(file->SectorInCache, file->Cache))
                {
                        Fat16_Deinit();
                        return(EOF);
                }                      
        }

        file->Cache[file->ByteOfCurrSector] = (u8)c;                    // write databyte into the buffer. The byte will be written to the device at once
        if(file->Size == file->Position) file->Size++;          // a character has been written to the file so the size is incremented only when the character has been added at the end of the file.
        file->Position++;                                                                       // the actual positon within the file.
        file->ByteOfCurrSector++;                                                       // goto next byte in sector
        if(file->ByteOfCurrSector >= BYTES_PER_SECTOR)          // if the end of this sector is reached yet
        {       // save the sector to the sd-card
                if(SD_SUCCESS != SDC_PutSector(file->SectorInCache, file->Cache))
                {
                        Fat16_Deinit();
                        return(EOF);
                }
                file->ByteOfCurrSector = 0;                                             //  reset byte location
                file->SectorOfCurrCluster++;                                    //      next sector
                if(file->SectorOfCurrCluster >= Partition.SectorsPerCluster)// if end of cluster is reached, the next datacluster has to be searched in the FAT.
                {
                        if(!GetNextCluster(file))                                                               // Sets the clusterpointer of the file to the next datacluster.
                        { // if current cluster was the last cluster of the file
                                if(!AppendCluster(file))                                                // append a new and free cluster at the end of the file.
                                {
                                        file->SectorOfCurrCluster--;                            // jump back to last sector of last cluster
                                        file->ByteOfCurrSector = BYTES_PER_SECTOR;      // set byte location to 1 byte over sector len
                                        return(EOF);
                                }
                        }
                        else // next cluster
                        {
                                file->SectorOfCurrCluster = 0;                                                  // start reading new cluster at first sector of the cluster.
                        }                                              
                }
        }
        return(0);
}


/****************************************************************************************************************************************/
/*      Function:               fread_(void *buffer, s32 size, s32 count, File *File);                                                                                                                          */
/*                                                                                                                                                                                                                                                                              */
/*      Description:    This function reads count objects of the specified size                                                                                                                         */
/*                                      from the actual position of the file to the specified buffer.                                                                                                           */
/*                                                                                                                                                                                                                                                                              */
/*      Returnvalue:    The function returns the number of objects (not bytes) read from the file.                                                                                      */
/****************************************************************************************************************************************/
u32 fread_(void *buffer, u32 size, u32 count, File_t *file)
{
        u32 object_cnt  = 0;                                                                                    // count the number of objects read from the file.
        u32 object_size = 0;                                                                                    // count the number of bytes read from the actual object.
        u8 *pbuff       = 0;                                                                                    // a pointer to the actual bufferposition.
        u8 success      = 1;                                                                                    // no error occured during read operation to the file.
        s16 c; 

        if((!Partition.IsValid) || (file == NULL) || (buffer == NULL)) return(0);

        pbuff = (u8 *) buffer;                                                                                  // cast the void pointer to an u8 *
       
        while((object_cnt < count) && success)
        {
                object_size = size;
                while((size > 0) && success)
                {
                        c = fgetc_(file);
                        if(c != EOF)
                        {
                                *pbuff = (u8)c;                                                                         // read a byte from the buffer to the opened file.
                                pbuff++;
                                size--;
                        }
                        else // error or end of file reached
                        {
                                success = 0;   
                        }
                }
                if(success) object_cnt++;
        }              
        return(object_cnt);                                                                                             // return the number of objects succesfully read from the file
}


/****************************************************************************************************************************************/
/*      Function:               fwrite_(void *buffer, s32 size, s32 count, File *file);                                                                                                                         */
/*                                                                                                                                                                                                                                                                              */
/*      Description:    This function writes count objects of the specified size                                                                                                                        */
/*                                      from the buffer pointer to the actual position in the file.                                                                                                                     */
/*                                                                                                                                                                                                                                                                              */
/*      Returnvalue:    The function returns the number of objects (not bytes) read from the file.                                                                                      */
/****************************************************************************************************************************************/
u32 fwrite_(void *buffer, u32 size, u32 count, File_t *file)
{
        u32 object_cnt  = 0;                                                                                                            // count the number of objects written to the file.
        u32 object_size = 0;                                                                                                            // count the number of bytes written from the actual object.
        u8 *pbuff           = 0;                                                                                                                // a pointer to the actual bufferposition.
        u8 success      = 1;                                                                                                            // no error occured during write operation to the file.
        s16 c; 

        if((!Partition.IsValid) || (file == NULL) || (buffer == NULL)) return(0);

        pbuff = (u8 *) buffer;                                                                                                          // cast the void pointer to an u8 *
       
        while((object_cnt < count) && success)
        {
                object_size = size;
                while((size > 0) && success)
                {
                        c = fputc_(*pbuff, file);                                                                               // write a byte from the buffer to the opened file.
                        if(c != EOF)
                        {
                                pbuff++;
                                size--;
                        }
                        else
                        {
                                success = 0;
                        }
                }
                if(success) object_cnt++;
        }              
       
        return(object_cnt);                                                                                                                             // return the number of objects succesfully written to the file
}                                                                                                                                                                              


/****************************************************************************************************************************************/
/*      Function:               fputs_(const s8 *string, File_t *File);                                                                                                                                                         */
/*                                                                                                                                                                                                                                                                              */
/*      Description:    This function writes a string to the specified file.                                                                                                                            */
/*                                                                                                                                                                                                                                                                              */
/*      Returnvalue:    The function returns a no negative value or EOF on error.                                                                                                                       */
/****************************************************************************************************************************************/
s16 fputs_(const s8 *string, File_t *file)
{
        u8 i=0;
        s16 c = 0;
       
        if((!Partition.IsValid) || (file == NULL) || (string == NULL)) return(0);

        while((string[i] != 0)&& (c != EOF))
        {
                c = fputc_(string[i], file);
                i++;
        }
        return(c);
}

/****************************************************************************************************************************************/
/*      Function:               fgets_(s8 *, s16 , File_t *);                                                                                                                                                                           */
/*                                                                                                                                                                                                                                                                              */
/*      Description:    This function reads a string from the file to the specifies string.                                                                                             */
/*                                                                                                                                                                                                                                                                              */
/*      Returnvalue:    A pointer to the string read from the file or 0 on error.                                                                                                                       */
/****************************************************************************************************************************************/
u8 * fgets_(s8 *string, s16 length, File_t *file)
{
        u8 *pbuff;
        s16 c = 0;
       
        if((!Partition.IsValid) || (file == NULL) || (string == NULL) || (length = 0)) return (0);
        pbuff = string;
        while(length > 1)                                                       // read the count-1 characters from the file to the string.
        {
                c = fgetc_(file);                                               // read a character from the opened file.
                switch(c)
                {
                        case 0x0A:
                                c = 0;                                                  // set string terminator
                                length = 1;                                             // stop loop
                                break;
                       
                        case EOF:
                                c = 0;                                                  // set string terminator
                                length = 1;                                             // stop loop
                                break; 
                }
                *pbuff = (u8)c;                                                 // copy byte to string
                length--;
                pbuff++;
        }
        return(string);
}

/****************************************************************************************************************************************/
/*      Function:               fexist_(const u8*);                                                                                                                                                                                                     */
/*                                                                                                                                                                                                                                                                              */
/*      Description:    This function checks if a file already exist.                                                                                                                                           */
/*                                                                                                                                                                                                                                                                              */
/*      Returnvalue:    1 if the file exist else 0.                                                                                                                                                                                     */
/****************************************************************************************************************************************/
u8 fexist_(const s8* filename)
{
        u8 exist = 0;
        File_t *file = 0;
        file = LockFilePointer();
        exist = FileExist(filename, ATTR_NONE, ATTR_SUBDIRECTORY|ATTR_VOLUMELABEL, file);
        UnlockFilePointer(file);
        return(exist);
}

/****************************************************************************************************************************************/
/*      Function:               feof_(File_t *File);                                                                                                                                                                                            */
/*                                                                                                                                                                                                                                                                              */
/*      Description:    This function checks wether the end of the file has been reached.                                                                                                                                               */
/*                                                                                                                                                                                                                                                                              */
/*      Returnvalue:    0 if the end of the file was not reached otherwise 1.                                                                                                                                                                           */
/****************************************************************************************************************************************/
u8 feof_(File_t *file)
{      
        if(((file->Position)+1) < (file->Size))
        {
                return(0);
        }
        else
        {
                return(1);     
        }
}