Subversion Repositories MK3Mag

Rev

Rev 19 | Rev 22 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

/*#######################################################################################
MK3Mag 3D-Magnet sensor
!!! THIS IS NOT FREE SOFTWARE !!!
#######################################################################################*/

// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Copyright (c) 05.2008 Holger Buss
// + Thanks to Ilja Fähnrich (P_Latzhalter)
// + Nur für den privaten Gebrauch
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zulässig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist.
// + AUSNAHME: Ein bei www.mikrokopter.de erworbener vorbestückter MK3Mag darf als Baugruppe auch in kommerziellen Systemen verbaut werden
// + Im Zweifelsfall bitte anfragen bei: info@mikrokopter.de
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"
// + eindeutig als Ursprung verlinkt werden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion
// + Benutzung auf eigene Gefahr
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Redistributions of source code (with or without modifications) must retain the above copyright notice,
// + this list of conditions and the following disclaimer.
// +   * PORTING this software (or parts of it) to systems (other than hardware from www.mikrokopter.de) is NOT allowed
// +   * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived
// +     from this software without specific prior written permission.
// +   * The use of this project (hardware, software, binary files, sources and documentation) is only permittet
// +     for non-commercial use (directly or indirectly)
// +     Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted
// +     with our written permission
// +     Exception: A preassembled MK3Mag, purchased from www.mikrokopter.de may be used as a part of commercial systems
// +     In case of doubt please contact: info@MikroKopter.de
// +   * If sources or documentations are redistributet on other webpages, our webpage (http://www.MikroKopter.de) must be
// +     clearly linked as origin
// +  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// +  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// +  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// +  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
// +  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// +  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// +  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// +  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// +  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// +  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// +  POSSIBILITY OF SUCH DAMAGE.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#include <avr/io.h>
#include <avr/interrupt.h>
#include <avr/wdt.h>
#include "main.h"
#include "uart.h"
#include "timer0.h"
#include "twislave.h"


#define FALSE   0
#define TRUE    1

#define TXD_BUFFER_LEN  150
#define RXD_BUFFER_LEN  150

volatile uint8_t txd_buffer[TXD_BUFFER_LEN];
volatile uint8_t rxd_buffer_locked = FALSE;
volatile uint8_t rxd_buffer[RXD_BUFFER_LEN];
volatile uint8_t txd_complete = TRUE;
volatile uint8_t ReceivedBytes = 0;



uint8_t RequestVerInfo                  = FALSE;
uint8_t RequestDebugData                = FALSE;
uint8_t RequestDebugLabel               = FALSE;
uint8_t RequestCompassHeading   = FALSE;

uint8_t MySlaveAddr = 0;

//unsigned char,DebugGetAnforderung = 0,

DebugOut_t              DebugOut;
ExternData_t    ExternData;
ExternControl_t ExternControl;
VersionInfo_t   VersionInfo;

uint16_t  Debug_Timer;

const uint8_t ANALOG_LABEL[32][16] =
{
   //1234567890123456
    "Magnet X        ", //0
    "Magnet Y        ",
    "Magnet Z        ",
    "Raw X           ",
    "Raw Y           ",
    "Raw Z           ", //5
    "Attitude Nick   ",
    "Attitude Roll   ",
    "XOffset         ",
    "XRange          ",
    "YOffset         ", //10
    "YRange          ",
    "ZOffset         ",
    "ZRange          ",
    "Calstate        ",
    "Heading         ", //15
    "User0           ",
    "User1           ",
    "Analog18        ",
    "Analog19        ",
    "Analog20        ", //20
    "Analog21        ",
    "Analog22        ",
    "Analog23        ",
    "Analog24        ",
    "Analog25        ", //25
    "Analog26        ",
    "Analog27        ",
    "Analog28        ",
    "Analog29        ",
    "Analog30        ", //30
    "Analog31        "
};


/****************************************************************/
/*              Initialization of the USART0                    */
/****************************************************************/
void USART0_Init (void)
{
        uint8_t sreg = SREG;

        uint16_t ubrr = (uint16_t) ((uint32_t) SYSCLK/(8 * BAUD_RATE) - 1);

        // disable all interrupts before configuration
        cli();

        // disable RX-Interrupt
        UCSR0B &= ~(1 << RXCIE0);
        // disable TX-Interrupt
        UCSR0B &= ~(1 << TXCIE0);

        // set direction of RXD0 and TXD0 pins

        // set RXD0 (PD0) as an input pin
        PORTD |= (1 << PORTD0);
        DDRD  &= ~(1 << DDD0);
        // set TXD0 (PD1) as an output pin
        PORTD |= (1 << PORTD1);
        DDRD  |= (1 << DDD1);

        // USART0 Baud Rate Register
        // set clock divider
        UBRR0H = (uint8_t)(ubrr >> 8);
        UBRR0L = (uint8_t)ubrr;

        // USART0 Control and Status Register A, B, C

        // enable double speed operation
        UCSR0A |= (1 << U2X0);
        // enable receiver and transmitter
        UCSR0B |= (1 << TXEN0) | (1 << RXEN0);
        // set asynchronous mode
        UCSR0C &= ~(1 << UMSEL01);
        UCSR0C &= ~(1 << UMSEL00);
        // no parity
        UCSR0C &= ~(1 << UPM01);
        UCSR0C &= ~(1 << UPM00);
        // 1 stop bit
        UCSR0C &= ~(1 << USBS0);
        // 8-bit
        UCSR0B &= ~(1 << UCSZ02);
        UCSR0C |=  (1 << UCSZ01);
        UCSR0C |=  (1 << UCSZ00);

        // flush receive buffer
        while ( UCSR0A & (1<<RXC0) ) UDR0;

        // enable interrupts at the end
        // enable RX-Interrupt
        UCSR0B |= (1 << RXCIE0);
        // enable TX-Interrupt
        UCSR0B |= (1 << TXCIE0);

        rxd_buffer_locked = FALSE;
        txd_complete = TRUE;

        Debug_Timer = SetDelay(200);


        // restore global interrupt flags
    SREG = sreg;

        VersionInfo.Major = VERSION_MAJOR;
        VersionInfo.Minor = VERSION_MINOR;
    VersionInfo.PCCompatible = VERSION_COMPATIBLE;

        // Version beim Start ausgeben (nicht schön, aber geht... )
        uart_putchar ('\n');uart_putchar ('C');uart_putchar ('P');uart_putchar (':');
        uart_putchar ('V');uart_putchar (0x30 + VERSION_MAJOR);uart_putchar ('.');uart_putchar (0x30 + VERSION_MINOR/10); uart_putchar (0x30 + VERSION_MINOR%10);
    uart_putchar ('\n');
}

// ---------------------------------------------------------------------------------
void USART0_EnableTXD(void)
{
        //if(!(UCSR0B & (1 << TXEN0))) return;
        DDRD |= (1<<DDD1);              // set TXD pin as output
        UCSR0B |= (1 << TXEN0);         // enable TX in USART
}

// ---------------------------------------------------------------------------------
void USART0_DisableTXD(void)
{
        //if((UCSR0B & (1 << TXEN0))) return;
        while(!txd_complete){ };

        UCSR0B &= ~(1 << TXEN0);        // disable TXD in USART
        DDRD &= ~(1<<DDD1);             // set TXD pin as input
}

/****************************************************************/
/*               USART0 transmitter ISR                         */
/****************************************************************/
ISR(USART_TX_vect)
{
        static uint16_t ptr_txd_buffer = 0;
        uint8_t tmp_tx;
        if(!txd_complete) // transmission not completed
        {
                ptr_txd_buffer++;                    // die [0] wurde schon gesendet
                tmp_tx = txd_buffer[ptr_txd_buffer];
                // if terminating character or end of txd buffer was reached
                if((tmp_tx == '\r') || (ptr_txd_buffer == TXD_BUFFER_LEN))
                {
                        ptr_txd_buffer = 0; // reset txd pointer
                        txd_complete = TRUE; // stop transmission
                }
                UDR0 = tmp_tx; // send current byte will trigger this ISR again
        }
        // transmission completed
        else ptr_txd_buffer = 0;
}

/****************************************************************/
/*               USART0 receiver ISR                            */
/****************************************************************/
ISR(USART_RX_vect)
{
        static uint16_t crc;
        uint8_t crc1, crc2;
        uint8_t c;
        static uint8_t ptr_rxd_buffer = 0;

        c = UDR0;  // catch the received byte

        if(rxd_buffer_locked) return; // if rxd buffer is locked immediately return

        // the rxd buffer is unlocked
        if((ptr_rxd_buffer == 0) && (c == '#')) // if rxd buffer is empty and syncronisation character is received
        {
                rxd_buffer[ptr_rxd_buffer++] = c; // copy 1st byte to buffer
                crc = c; // init crc
        }
        #if 0
        else if (ptr_rxd_buffer == 1) // handle address
        {
                rxd_buffer[ptr_rxd_buffer++] = c; // copy byte to rxd buffer
                crc += c; // update crc
        }
        #endif
        else if (ptr_rxd_buffer < RXD_BUFFER_LEN) // collect incomming bytes
        {
                if(c != '\r') // no termination character
                {
                        rxd_buffer[ptr_rxd_buffer++] = c; // copy byte to rxd buffer
                        crc += c; // update crc
                }
                else // termination character was received
                {
                        // the last 2 bytes are no subject for checksum calculation
                        // they are the checksum itself
                        crc -= rxd_buffer[ptr_rxd_buffer-2];
                        crc -= rxd_buffer[ptr_rxd_buffer-1];
                        // calculate checksum from transmitted data
                        crc %= 4096;
                        crc1 = '=' + crc / 64;
                        crc2 = '=' + crc % 64;
                        // compare checksum to transmitted checksum bytes
                        if((crc1 == rxd_buffer[ptr_rxd_buffer-2]) && (crc2 == rxd_buffer[ptr_rxd_buffer-1]))
                        {   // checksum valid
                                rxd_buffer_locked = TRUE;          // lock the rxd buffer
                                ReceivedBytes = ptr_rxd_buffer;    // store number of received bytes
                                rxd_buffer[ptr_rxd_buffer] = '\r'; // set termination character
                                // if 2nd byte is an 'R' enable watchdog that will result in an reset
                                if(rxd_buffer[2] == 'R') {wdt_enable(WDTO_250MS);} // Reset-Commando
                        }
                        else
                        {       // checksum invalid
                                rxd_buffer_locked = FALSE; // unlock rxd buffer
                        }
                        ptr_rxd_buffer = 0; // reset rxd buffer pointer
                }
        }
        else // rxd buffer overrun
        {
                ptr_rxd_buffer = 0; // reset rxd buffer
                rxd_buffer_locked = FALSE; // unlock rxd buffer
        }
}


// --------------------------------------------------------------------------
void AddCRC(uint16_t datalen)
{
        uint16_t tmpCRC = 0, i;
        for(i = 0; i < datalen; i++)
        {
                tmpCRC += txd_buffer[i];
        }
        tmpCRC %= 4096;
        txd_buffer[i++] = '=' + tmpCRC / 64;
        txd_buffer[i++] = '=' + tmpCRC % 64;
        txd_buffer[i++] = '\r';
        txd_complete = FALSE;
        UDR0 = txd_buffer[0]; // initiates the transmission (continued in the TXD ISR)
}



// --------------------------------------------------------------------------
void SendOutData(uint8_t cmd,uint8_t module, uint8_t *snd, uint8_t len)
{
        uint16_t pt = 0;
        uint8_t a,b,c;
        uint8_t ptr = 0;

        txd_buffer[pt++] = '#';         // Start character
        txd_buffer[pt++] = module;      // Address (a=0; b=1,...)
        txd_buffer[pt++] = cmd;         // Command

        while(len)
        {
                if(len) { a = snd[ptr++]; len--;} else a = 0;
                if(len) { b = snd[ptr++]; len--;} else b = 0;
                if(len) { c = snd[ptr++]; len--;} else c = 0;
                txd_buffer[pt++] = '=' + (a >> 2);
                txd_buffer[pt++] = '=' + (((a & 0x03) << 4) | ((b & 0xf0) >> 4));
                txd_buffer[pt++] = '=' + (((b & 0x0f) << 2) | ((c & 0xc0) >> 6));
                txd_buffer[pt++] = '=' + ( c & 0x3f);
        }
        AddCRC(pt); // add checksum after data block and initates the transmission
}


// --------------------------------------------------------------------------
void Decode64(uint8_t *ptrOut, uint8_t len, uint8_t ptrIn, uint8_t max)
{
        uint8_t a,b,c,d;
        uint8_t ptr = 0;
        uint8_t x,y,z;
        while(len)
        {
                a = rxd_buffer[ptrIn++] - '=';
                b = rxd_buffer[ptrIn++] - '=';
                c = rxd_buffer[ptrIn++] - '=';
                d = rxd_buffer[ptrIn++] - '=';
                if(ptrIn > max - 2) break;

                x = (a << 2) | (b >> 4);
                y = ((b & 0x0f) << 4) | (c >> 2);
                z = ((c & 0x03) << 6) | d;

                if(len--) ptrOut[ptr++] = x; else break;
                if(len--) ptrOut[ptr++] = y; else break;
                if(len--) ptrOut[ptr++] = z; else break;
        }
}


// --------------------------------------------------------------------------
int uart_putchar (int8_t c)
{
        // if tx is not enabled return immediatly
        if(!(UCSR0B & (1 << TXEN0))) return (0);
        if (c == '\n') uart_putchar('\r');
        // wait until previous character was send
        loop_until_bit_is_set(UCSR0A, UDRE0);
        // send character
        UDR0 = c;
        return (0);
}


// --------------------------------------------------------------------------
void USART0_ProcessRxData(void)
{
        // if data in the rxd buffer are not locked immediately return
        if(!rxd_buffer_locked) return;

        uint8_t tmp_char_arr2[2]; // local char buffer

        switch(rxd_buffer[2])
        {
           case 'w':// Attitude
                        Decode64((uint8_t *) &ExternData, sizeof(ExternData), 3, ReceivedBytes);
                        RequestCompassHeading = TRUE;
                        break;

                case 'b': // extern control
                case 'c': // extern control with debug request
                        Decode64((uint8_t *) &ExternControl,sizeof(ExternControl), 3,ReceivedBytes);
                        #define KEY1    0x01
                        #define KEY2    0x02
                        #define KEY3    0x04
                        #define KEY4    0x08
                        #define KEY5    0x10
                        // use right arrow at display for switching the calstate
                        if(ExternControl.RemoteButtons & KEY2)
                        {
                                ExternData.CalState++;
                                if(ExternData.CalState == 6) ExternData.CalState = 0;
                        }
                        ExternData.Attitude[0] = ExternControl.Par1;
            ExternData.Attitude[1] = ExternControl.Par2;
            PC_Connected = 255;
                        break;

                case 'h':// x-1 display columns
                        PC_Connected = 255;
                        break;

                case 'v': // get version and board release
                        RequestVerInfo = TRUE;
                        PC_Connected = 255;
                        break;

                case 'a':// Labels of the Analog Debug outputs
                        Decode64((uint8_t *) &tmp_char_arr2[0], sizeof(tmp_char_arr2), 3, ReceivedBytes);
                        RequestDebugLabel = tmp_char_arr2[0];
                        PC_Connected = 255;
                        break;

                case 'g':// get debug data
                        RequestDebugData = TRUE;
                        PC_Connected = 255;
                        break;
        }
        // unlock the rxd buffer after processing
        rxd_buffer_locked = FALSE;
}



//---------------------------------------------------------------------------------------------
void USART0_TransmitTxData(void)
{
        if(!(UCSR0B & (1 << TXEN0))) return;

        if(!txd_complete) return;

    if(CheckDelay(Debug_Timer) && txd_complete)
    {
                SetDebugValues();
                SendOutData('D',MySlaveAddr,(uint8_t *) &DebugOut,sizeof(DebugOut));
                Debug_Timer = SetDelay(250);
    }

    if(RequestDebugLabel != 255)
    {
                SendOutData('A',RequestDebugLabel + '0',(uint8_t *) ANALOG_LABEL[RequestDebugLabel],16);
                RequestDebugLabel = 255;
        }

        if(RequestVerInfo && txd_complete)
    {
                SendOutData('V',MySlaveAddr,(uint8_t *) &VersionInfo, sizeof(VersionInfo));
                RequestVerInfo = FALSE;
    }

        if(RequestDebugData && txd_complete)
        {
                SetDebugValues();
                SendOutData('G',MySlaveAddr,(uint8_t *) &ExternControl,sizeof(ExternControl));
                RequestDebugData = FALSE;
        }

    if(RequestCompassHeading && txd_complete)
        {
                SendOutData('K',MySlaveAddr,(uint8_t *) &I2C_Heading, sizeof(I2C_Heading));
                RequestCompassHeading = FALSE;
        }
}