Subversion Repositories FlightCtrl

Rev

Rev 2285 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Software Nutzungsbedingungen (english version: see below)
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + der Fa. HiSystems GmbH, Flachsmeerstrasse 2, 26802 Moormerland - nachfolgend Lizenzgeber genannt -
// + Der Lizenzgeber räumt dem Kunden ein nicht-ausschließliches, zeitlich und räumlich* unbeschränktes Recht ein, die im den
// + Mikrocontroller verwendete Firmware für die Hardware Flight-Ctrl, Navi-Ctrl, BL-Ctrl, MK3Mag & PC-Programm MikroKopter-Tool
// + - nachfolgend Software genannt - nur für private Zwecke zu nutzen.
// + Der Einsatz dieser Software ist nur auf oder mit Produkten des Lizenzgebers zulässig.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die vom Lizenzgeber gelieferte Software ist urheberrechtlich geschützt. Alle Rechte an der Software sowie an sonstigen im
// + Rahmen der Vertragsanbahnung und Vertragsdurchführung überlassenen Unterlagen stehen im Verhältnis der Vertragspartner ausschließlich dem Lizenzgeber zu.
// + Die in der Software enthaltenen Copyright-Vermerke, Markenzeichen, andere Rechtsvorbehalte, Seriennummern sowie
// + sonstige der Programmidentifikation dienenden Merkmale dürfen vom Kunden nicht verändert oder unkenntlich gemacht werden.
// + Der Kunde trifft angemessene Vorkehrungen für den sicheren Einsatz der Software. Er wird die Software gründlich auf deren
// + Verwendbarkeit zu dem von ihm beabsichtigten Zweck testen, bevor er diese operativ einsetzt.
// + Die Haftung des Lizenzgebers wird - soweit gesetzlich zulässig - begrenzt in Höhe des typischen und vorhersehbaren
// + Schadens. Die gesetzliche Haftung bei Personenschäden und nach dem Produkthaftungsgesetz bleibt unberührt. Dem Lizenzgeber steht jedoch der Einwand
// + des Mitverschuldens offen.
// + Der Kunde trifft angemessene Vorkehrungen für den Fall, dass die Software ganz oder teilweise nicht ordnungsgemäß arbeitet.
// + Er wird die Software gründlich auf deren Verwendbarkeit zu dem von ihm beabsichtigten Zweck testen, bevor er diese operativ einsetzt.
// + Der Kunde wird er seine Daten vor Einsatz der Software nach dem Stand der Technik sichern.
// + Der Kunde ist darüber unterrichtet, dass der Lizenzgeber seine Daten im zur Vertragsdurchführung erforderlichen Umfang
// + und auf Grundlage der Datenschutzvorschriften erhebt, speichert, verarbeitet und, sofern notwendig, an Dritte übermittelt.
// + *) Die räumliche Nutzung bezieht sich nur auf den Einsatzort, nicht auf die Reichweite der programmierten Software.
// + #### ENDE DER NUTZUNGSBEDINGUNGEN ####'
// +  Hinweis: Informationen über erweiterte Nutzungsrechte (wie z.B. Nutzung für nicht-private Zwecke) sind auf Anfrage per Email an info(@)hisystems.de verfügbar.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Software LICENSING TERMS
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + of HiSystems GmbH, Flachsmeerstrasse 2, 26802 Moormerland, Germany - the Licensor -
// + The Licensor grants the customer a non-exclusive license to use the microcontroller firmware of the Flight-Ctrl, Navi-Ctrl, BL-Ctrl, and MK3Mag hardware
// + (the Software) exclusively for private purposes. The License is unrestricted with respect to time and territory*.
// + The Software may only be used with the Licensor's products.
// + The Software provided by the Licensor is protected by copyright. With respect to the relationship between the parties to this
// + agreement, all rights pertaining to the Software and other documents provided during the preparation and execution of this
// + agreement shall be the property of the Licensor.
// + The information contained in the Software copyright notices, trademarks, other legal reservations, serial numbers and other
// + features that can be used to identify the program may not be altered or defaced by the customer.
// + The customer shall be responsible for taking reasonable precautions
// + for the safe use of the Software. The customer shall test the Software thoroughly regarding its suitability for the
// + intended purpose before implementing it for actual operation. The Licensor's liability shall be limited to the extent of typical and
// + foreseeable damage to the extent permitted by law, notwithstanding statutory liability for bodily injury and product
// + liability. However, the Licensor shall be entitled to the defense of contributory negligence.
// + The customer will take adequate precautions in the case, that the software is not working properly. The customer will test
// + the software for his purpose before any operational usage. The customer will backup his data before using the software.
// + The customer understands that the Licensor collects, stores and processes, and, where required, forwards, customer data
// + to third parties to the extent necessary for executing the agreement, subject to applicable data protection and privacy regulations.
// + *) The territory aspect only refers to the place where the Software is used, not its programmed range.
// + #### END OF LICENSING TERMS ####
// + Note: For information on license extensions (e.g. commercial use), please contact us at info(@)hisystems.de.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#include "jetimenu.h"
#include "libfc.h"
#include "printf_P.h"
#include "main.h"
#include "spi.h"
#include "capacity.h"
#include "hottmenu.h"

#define JETIBOX_KEY_RIGHT       0x1F
#define JETIBOX_KEY_UP          0x2F
#define JETIBOX_KEY_DOWN        0x4F
#define JETIBOX_KEY_LEFT        0x8F
#define JETIBOX_KEY_NONE        0x0F
#define JETIBOX_KEY_UNDEF       0x00

#define JetiBox_printfxy(x,y,format, args...)  { LIBFC_JetiBox_SetPos(y * 16 + x); _printf_P(&LIBFC_JetiBox_Putchar, PSTR(format) , ## args);}
#define JetiBox_printf(format, args...)        {  _printf_P(&LIBFC_JetiBox_Putchar, PSTR(format) , ## args);}

// -----------------------------------------------------------
// the menu functions
// -----------------------------------------------------------
void Menu_Status(uint8_t key)
{                                               //0123456789ABCDEF
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
        JetiBox_printfxy(0,0,"%2i.%1iV",UBat/10, UBat%10);
        if(NaviDataOkay)
        {
                JetiBox_printfxy(6,0,"%3d%c %03dm%c",ErsatzKompassInGrad, 0xDF, GPSInfo.HomeDistance/10,NC_GPS_ModeCharacter);
        }
        else
        {
                JetiBox_printfxy(6,0,"Status");
        }

#if (defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__))
        if(NC_ErrorCode)
        {
         static unsigned int timer;
         static char toggle = 1;
     
         if(CheckDelay(timer)) { if(toggle) toggle = 0; else toggle = 1; timer = SetDelay(1500);};
     if(toggle)
          {
       LIBFC_JetiBox_SetPos(0);
           _printf_P(&LIBFC_JetiBox_Putchar, NC_ERROR_TEXT[NC_ErrorCode] , 0);
          }
          else
          {
           JetiBox_printfxy(6,0,"ERROR: %2d ",NC_ErrorCode);
           if(MotorenEin) JetiBeep = 'O';
          }
        }
#else
        if(NC_ErrorCode) { JetiBox_printfxy(6,0,"ERROR: %2d ",NC_ErrorCode); if(MotorenEin) JetiBeep = 'O';};
#endif
        JetiBox_printfxy(0,1,"%4i %2i:%02i",Capacity.UsedCapacity,FlugSekunden/60,FlugSekunden%60);
        if(Parameter_GlobalConfig & CFG_HOEHENREGELUNG)
        {
                JetiBox_printfxy(10,1,"%4im%c", (int16_t)(HoehenWert/100),VarioCharacter);
        }
#endif
}


void Menu_Temperature(uint8_t key)
{                       //0123456789ABCDEF
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
  JetiBox_printfxy(0,0,"%3i %3i %3i %3i", Motor[0].Temperature, Motor[1].Temperature, Motor[2].Temperature, Motor[3].Temperature);
  JetiBox_printfxy(0,1,"%3i %3i %3i %3i", Motor[4].Temperature, Motor[5].Temperature, Motor[6].Temperature, Motor[7].Temperature);
  if(RequiredMotors <= 4)
        {
         JetiBox_printfxy(0,1,"Temperatures    ");
    }
        else
    if(RequiredMotors <= 6)
        {
         JetiBox_printfxy(8,1,"\%cC     ",0xdf);
        }

#endif
}

void Menu_Battery(uint8_t key)
{                       //0123456789ABCDEF
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
        JetiBox_printfxy(0,0,"%2i.%1iV %3i.%1iA", UBat/10, UBat%10, Capacity.ActualCurrent/10, Capacity.ActualCurrent%10);
        JetiBox_printfxy(0,1,"%4iW %6imAh",Capacity.ActualPower, Capacity.UsedCapacity);
#endif
}

void Magnet_Values(uint8_t key)
{                       //0123456789ABCDEF
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
        JetiBox_printfxy(0,0,"Magnet:%3i%% %3i%c",EarthMagneticField, KompassValue,0xDF);
        JetiBox_printfxy(0,1,"Incli.:%3i%c (%i) ",EarthMagneticInclination, 0xDF,EarthMagneticInclinationTheoretic);
#endif
}


void Menu_PosInfo(uint8_t key)
{
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
        if(NaviDataOkay)
        {
                JetiBox_printfxy(0,0,"%2um/s Sat:%d ",GPSInfo.Speed,GPSInfo.NumOfSats);
                switch (GPSInfo.SatFix)
                {
                        case SATFIX_3D:
                                JetiBox_printfxy(12,0,"  3D");
                                break;
//                      case SATFIX_2D:
//                      case SATFIX_NONE:
                        default:
                                JetiBox_printfxy(12,0,"NoFx");
                                break;
                }
                if(GPSInfo.Flags & FLAG_DIFFSOLN)
                {
                        JetiBox_printfxy(12,0,"DGPS");
                }
                JetiBox_printfxy(0,1,"Home:%3dm %3d%c %c", GPSInfo.HomeDistance/10, GPSInfo.HomeBearing, 0xDF,NC_GPS_ModeCharacter);
        }
        else
        {                     //0123456789ABCDEF
                JetiBox_printfxy(2,0,"No NaviCtrl!");
        }
#endif
}


// -----------------------------------------------------------
// the menu topology
// -----------------------------------------------------------
typedef void (*pFctMenu) (uint8_t);  // the menu item handler function pointer

typedef struct{
  int8_t left;
  int8_t right;
  int8_t up;
  int8_t down;
  pFctMenu pHandler;
} MENU_ENTRY;


// the menu navigation structure
/*                                              |

3 - 0 - 1 - 2 - 3 - 0

*/


const MENU_ENTRY JetiBox_Menu[] PROGMEM=
{ // l  r  u  d  pHandler
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
        {4, 1, 0, 0, &Menu_Status },    // 0
        {0, 2, 1, 1, &Menu_Temperature },       // 1
        {1, 3, 2, 2, &Menu_Battery },   // 2
        {2, 4, 3, 3, &Menu_PosInfo },   // 3
        {3, 0, 4, 4, &Magnet_Values }   // 4
#endif
};

// -----------------------------------------------------------
// Update display buffer
// -----------------------------------------------------------
unsigned char JetiBox_Update(unsigned char key)
{
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
        static uint8_t item = 0, last_item = 0; // the menu item
        static uint8_t updateDelay = 1;

        // navigate within the menu by key action
        last_item = item;
        switch(key)
        {
                case JETIBOX_KEY_LEFT:
                        //if (item == 0) return (1);                                                                    // switch back to jeti expander menu
                        // else
                         item = pgm_read_byte(&JetiBox_Menu[item].left);                //trigger to left menu item
                        break;
                case JETIBOX_KEY_RIGHT:
                        item = pgm_read_byte(&JetiBox_Menu[item].right);        //trigger to right menu item
                        break;
                case JETIBOX_KEY_UP:
                        item = pgm_read_byte(&JetiBox_Menu[item].up);           //trigger to up menu item
                        break;
                case JETIBOX_KEY_DOWN:
                        item = pgm_read_byte(&JetiBox_Menu[item].down);         //trigger to down menu item
                        break;
                default:
                        break;
        }
        // if the menu item has been changed, do not pass the key to the item handler
        // to avoid jumping over to items
        if(item != last_item) key = JETIBOX_KEY_UNDEF;

        if (updateDelay++ & 0x01)
        {      

                LIBFC_JetiBox_Clear();
                //execute menu item handler
                ((pFctMenu)(pgm_read_word(&(JetiBox_Menu[item].pHandler))))(key);
        }      
#endif
        return (0);
}