Subversion Repositories FlightCtrl

/*
This program (files compass.c and compass.h) is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by the Free Software Foundation;
either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details. You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.

Please note: All the other files for the project "Mikrokopter" by H.Buss are under the license (license_buss.txt) published by www.mikrokopter.de
*/

#include "main.h"

MM3_struct MM3;


//############################################################################
//Initialisierung der SPI-Schnittstelle
void init_spi(void)
//############################################################################
{
        SPCR = (1<<SPIE)|(1<<SPE)|(1<<MSTR)|(1<<SPR1)|(1<<SPR0);
        //SPSR = (1<<SPI2X);
        DDRB |= (1<<PB2)|(1<<PB7)|(1<<PB5); // J8, SCK, MOSI Ausgang (MicroMag3)
               
        MM3.AXIS = MM3_X;
        MM3.STATE = MM3_RESET;
       
        PORTD &= ~(1<<PD3);     // J5 einmalig auf Low -> SSNOT
}


//############################################################################
//Wird in der SIGNAL (SIG_OVERFLOW0) aufgerufen
void MM3_timer0(void)
//############################################################################
{
        switch (MM3.STATE)
        {
        case MM3_RESET:                        
                PORTB |= (1<<PB2);      // J8 auf High, MM3 Reset
                MM3.STATE = MM3_START_TRANSFER;
                break;
               
        case MM3_START_TRANSFER:
                PORTB &= ~(1<<PB2);     // J8 auf Low          
               
                if (MM3.AXIS == MM3_X) SPDR = 0x41;                     // Schreiben ins SPDR löst automatisch Übertragung (MOSI und MISO) aus
                else if (MM3.AXIS == MM3_Y) SPDR = 0x42;
                else if (MM3.AXIS == MM3_Z) SPDR = 0x43;
                else {MM3.STATE == MM3_IDLE;break;}
               
                MM3.DRDY = SetDelay(8);
                MM3.STATE = MM3_WAIT_DRDY;
                break;
       
        case MM3_WAIT_DRDY:
                if (CheckDelay(MM3.DRDY)) {SPDR = 0x00;MM3.STATE = MM3_DRDY;} // Irgendwas ins SPDR, damit Übertragung ausgelöst wird
                break;
       
        case MM3_IDLE:         
                break;
        }
       
}

//############################################################################
//SPI byte ready
SIGNAL (SIG_SPI)
//############################################################################
{      
        switch (MM3.STATE)
        {      
        case MM3_DRDY:         
                if (MM3.AXIS == MM3_X) {MM3.x_axis=SPDR; MM3.x_axis<<=8; SPDR=0x00; MM3.STATE=MM3_X_BYTE2; break;}
                if (MM3.AXIS == MM3_Y) {MM3.y_axis=SPDR; MM3.y_axis<<=8; SPDR=0x00; MM3.STATE=MM3_Y_BYTE2; break;}
                if (MM3.AXIS == MM3_Z) {MM3.z_axis=SPDR; MM3.z_axis<<=8; SPDR=0x00; MM3.STATE=MM3_Z_BYTE2; break;}
       
        case MM3_X_BYTE2:              
                MM3.x_axis |= SPDR;                            
                MM3.AXIS = MM3_Y;
                MM3.STATE = MM3_RESET;
                break;
       
        case MM3_Y_BYTE2:
                MM3.y_axis |= SPDR;                            
                MM3.AXIS = MM3_Z;
                MM3.STATE = MM3_RESET;
                break;
       
        case MM3_Z_BYTE2:
                MM3.z_axis |= SPDR;                    
                MM3.AXIS = MM3_X;
                MM3.STATE = MM3_RESET;
                break; 
        }

}