Go to most recent revision |
Blame |
Compare with Previous |
Last modification |
View Log
| RSS feed
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Copyright (c) 04.2007 Holger Buss
// + only for non-profit use
// + www.MikroKopter.com
// + see the File "License.txt" for further Informations
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#include "main.h"
#include "altcon.h"
#include "pitch.h"
#include "pitch_md.h"
#include "parameter.h"
#include "fc.h"
unsigned int TestInt = 0;
#define ARRAYGROESSE 10
unsigned char Array[ARRAYGROESSE] = {1,2,3,4,5,6,7,8,9,10};
char DisplayBuff[80] = "Hallo Welt";
unsigned char DispPtr = 0;
unsigned char MaxMenue = 14;
unsigned char MenuePunkt = 0;
unsigned char RemoteKeys = 0;
#define KEY1 0x01
#define KEY2 0x02
#define KEY3 0x04
#define KEY4 0x08
#define KEY5 0x10
void LcdClear(void)
{
unsigned char i;
for(i=0;i<80;i++) DisplayBuff[i] = ' ';
}
void Menu(void)
{
if(MenuePunkt > MaxMenue) MenuePunkt = MaxMenue;
if(RemoteKeys & KEY1) { if(MenuePunkt) MenuePunkt--; else MenuePunkt = MaxMenue;}
if(RemoteKeys & KEY2) { if(MenuePunkt == MaxMenue) MenuePunkt = 0; else MenuePunkt++;}
if((RemoteKeys & KEY1) && (RemoteKeys & KEY2)) MenuePunkt = 0;
LcdClear();
if(MenuePunkt < 10) {LCD_printfxy(17,0,"[%i]",MenuePunkt);}
else {LCD_printfxy(16,0,"[%i]",MenuePunkt);};
switch(MenuePunkt)
{
case 0:
LCD_printfxy(0,0,"+ MikroKopter +");
LCD_printfxy(0,1,"HW:V%d.%d SW:%d.%d%c",PlatinenVersion/10,PlatinenVersion%10, VERSION_MAJOR, VERSION_MINOR, VERSION_PATCH +'a');
LCD_printfxy(0,2,"Setting:%d %s",GetActiveParamSetNumber(),Mixer.Name);
if(I2CTimeout < 6) LCD_printfxy(0,3,"I2C ERROR!!!")
else
if(MissingMotor) LCD_printfxy(0,3,"Missing BL-Ctrl:%d!!",MissingMotor)
else LCD_printfxy(0,3,"(c) Holger Buss");
// if(RemoteTasten & KEY3) TestInt--;
// if(RemoteTasten & KEY4) TestInt++;
break;
case 1:
if(EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG)
{
LCD_printfxy(0,0,"Hoehe: %5i",HoehenWert);
LCD_printfxy(0,1,"SollHoehe: %5i",SollHoehe);
LCD_printfxy(0,2,"Luftdruck: %5i",MessLuftdruck);
LCD_printfxy(0,3,"Off : %5i",DruckOffsetSetting);
}
else
{
LCD_printfxy(0,1,"Keine ");
LCD_printfxy(0,2,"Höhenregelung");
}
break;
case 2:
LCD_printfxy(0,0,"akt. Lage");
LCD_printfxy(0,1,"Nick: %5i",IntegralNick/1024);
LCD_printfxy(0,2,"Roll: %5i",IntegralRoll/1024);
LCD_printfxy(0,3,"Kompass: %5i",KompassValue);
break;
case 3:
LCD_printfxy(0,0,"K1:%4i K2:%4i ",PPM_in[1],PPM_in[2]);
LCD_printfxy(0,1,"K3:%4i K4:%4i ",PPM_in[3],PPM_in[4]);
LCD_printfxy(0,2,"K5:%4i K6:%4i ",PPM_in[5],PPM_in[6]);
LCD_printfxy(0,3,"K7:%4i K8:%4i ",PPM_in[7],PPM_in[8]);
break;
case 4:
LCD_printfxy(0,0,"Ni:%4i Ro:%4i ",PPM_in[EE_Parameter.Kanalbelegung[K_NICK]],PPM_in[EE_Parameter.Kanalbelegung[K_ROLL]]);
LCD_printfxy(0,1,"Gs:%4i Gi:%4i ",PPM_in[EE_Parameter.Kanalbelegung[K_GAS]],PPM_in[EE_Parameter.Kanalbelegung[K_GIER]]);
LCD_printfxy(0,2,"P1:%4i P2:%4i ",PPM_in[EE_Parameter.Kanalbelegung[K_POTI1]],PPM_in[EE_Parameter.Kanalbelegung[K_POTI2]]);
LCD_printfxy(0,3,"P3:%4i P4:%4i ",PPM_in[EE_Parameter.Kanalbelegung[K_POTI3]],PPM_in[EE_Parameter.Kanalbelegung[K_POTI4]]);
break;
case 5:
LCD_printfxy(0,0,"Gyro - Sensor");
if(PlatinenVersion == 10)
{
LCD_printfxy(0,1,"Nick %4i (%3i.%i)",AdWertNick - AdNeutralNick/8, AdNeutralNick/8, AdNeutralNick%8);
LCD_printfxy(0,2,"Roll %4i (%3i.%i)",AdWertRoll - AdNeutralRoll/8, AdNeutralRoll/8, AdNeutralRoll%8);
LCD_printfxy(0,3,"Gier %4i (%3i)",AdNeutralGier - AdWertGier, AdNeutralGier);
}
else
if((PlatinenVersion == 11) || (PlatinenVersion == 20))
{
LCD_printfxy(0,1,"Nick %4i (%3i.%x)",AdWertNick - AdNeutralNick/8, AdNeutralNick/16, (AdNeutralNick%16)/2);
LCD_printfxy(0,2,"Roll %4i (%3i.%x)",AdWertRoll - AdNeutralRoll/8, AdNeutralRoll/16, (AdNeutralRoll%16)/2);
LCD_printfxy(0,3,"Gier %4i (%3i)",AdNeutralGier - AdWertGier, AdNeutralGier/2);
}
else
if(PlatinenVersion == 13)
{
LCD_printfxy(0,1,"Nick %4i (%3i)(%3i)",AdWertNick - AdNeutralNick/8, AdNeutralNick/16,AnalogOffsetNick);
LCD_printfxy(0,2,"Roll %4i (%3i)(%3i)",AdWertRoll - AdNeutralRoll/8, AdNeutralRoll/16,AnalogOffsetRoll);
LCD_printfxy(0,3,"Gier %4i (%3i)(%3i)",AdNeutralGier - AdWertGier, AdNeutralGier/2,AnalogOffsetGier);
}
break;
case 6:
LCD_printfxy(0,0,"ACC - Sensor");
LCD_printfxy(0,1,"Nick %4i (%3i)",AdWertAccNick,NeutralAccX);
LCD_printfxy(0,2,"Roll %4i (%3i)",AdWertAccRoll,NeutralAccY);
LCD_printfxy(0,3,"Hoch %4i (%3i)",Mittelwert_AccHoch/*accumulate_AccHoch / messanzahl_AccHoch*/,(int)NeutralAccZ);
break;
case 7:
LCD_printfxy(0,1,"Spannung: %5i",UBat);
LCD_printfxy(0,2,"Empf.Pegel:%5i",SenderOkay);
break;
case 8:
LCD_printfxy(0,0,"Kompass ");
LCD_printfxy(0,1,"Richtung: %5i",KompassRichtung);
LCD_printfxy(0,2,"Messwert: %5i",KompassValue);
LCD_printfxy(0,3,"Start: %5i",KompassStartwert);
break;
case 9:
LCD_printfxy(0,0,"Poti1: %3i",Poti1);
LCD_printfxy(0,1,"Poti2: %3i",Poti2);
LCD_printfxy(0,2,"Poti3: %3i",Poti3);
LCD_printfxy(0,3,"Poti4: %3i",Poti4);
break;
case 10:
LCD_printfxy(0,0,"Servo " );
LCD_printfxy(0,1,"Setpoint %3i",Parameter_ServoNickControl);
LCD_printfxy(0,2,"Stellung: %3i",ServoValue);
LCD_printfxy(0,3,"Range:%3i-%3i",EE_Parameter.ServoNickMin,EE_Parameter.ServoNickMax);
break;
case 11:
LCD_printfxy(0,0,"ExternControl " );
LCD_printfxy(0,1,"Ni:%4i Ro:%4i ",ExternControl.Nick,ExternControl.Roll);
LCD_printfxy(0,2,"Gs:%4i Gi:%4i ",ExternControl.Gas,ExternControl.Gier);
LCD_printfxy(0,3,"Hi:%4i Cf:%4i ",ExternControl.Hight,ExternControl.Config);
break;
case 12:
LCD_printfxy(0,0,"BL-Ctrl Errors " );
LCD_printfxy(0,1," %3d %3d %3d %3d ",MotorError[0],MotorError[1],MotorError[2],MotorError[3]);
LCD_printfxy(0,2," %3d %3d %3d %3d ",MotorError[4],MotorError[5],MotorError[6],MotorError[7]);
LCD_printfxy(0,3," %3d %3d %3d %3d ",MotorError[8],MotorError[9],MotorError[10],MotorError[11]);
break;
case 13:
LCD_printfxy(0,0,"BL-Ctrl found " );
LCD_printfxy(0,1," %c %c %c %c ",MotorPresent[0] + '-',MotorPresent[1] + '-',MotorPresent[2] + '-',MotorPresent[3] + '-');
LCD_printfxy(0,2," %c %c %c %c ",MotorPresent[4] + '-',MotorPresent[5] + '-',MotorPresent[6] + '-',MotorPresent[7] + '-');
LCD_printfxy(0,3," %c - - -",MotorPresent[8] + '-');
if(MotorPresent[9]) LCD_printfxy(4,3,"10");
if(MotorPresent[10]) LCD_printfxy(8,3,"11");
if(MotorPresent[11]) LCD_printfxy(12,3,"12");
break;
case 14:
LCD_printfxy( 0, 0, "PitchControl " );
LCD_printfxy( 0, 1, "Modus : %2s", pitchModeStrings[ pitch_currentMode() ] );
// MD-Modus
switch( pitch_currentMode() ) {
case PARAM_PITCH_MODE_MD:
LCD_printfxy( 0, 2, "Standgas (%02d): %3i", PARAM_PITCH_HOVER_PERCENT, pitch_standValue() );
LCD_printfxy( 0, 3, "Schwebegas : %3i", pitch_hoverValue() );
break;
}
break;
default: MaxMenue = MenuePunkt - 1;
MenuePunkt = 0;
break;
}
RemoteKeys = 0;
}