Rev 2046 |
Rev 2048 |
Go to most recent revision |
Blame |
Compare with Previous |
Last modification |
View Log
| RSS feed
// Navigation with a GPS directly attached to the FC's UART1.
#include <inttypes.h>
#include <stdlib.h>
#include <stddef.h>
//#include "mymath.h"
//#include "timer0.h"
//#include "uart1.h"
//#include "rc.h"
//#include "eeprom.h"
#include "ubx.h"
#include "configuration.h"
#include "controlMixer.h"
#include "output.h"
#include "isqrt.h"
#include "attitude.h"
#include "dongfangMath.h"
typedef enum {
GPS_FLIGHT_MODE_UNDEF,
GPS_FLIGHT_MODE_FREE,
GPS_FLIGHT_MODE_AID,
GPS_FLIGHT_MODE_HOME,
} FlightMode_t;
#define GPS_POSINTEGRAL_LIMIT 32000
#define LOG_NAVI_STICK_GAIN 2
#define GPS_P_LIMIT 100
typedef struct {
int32_t longitude;
int32_t latitude;
int32_t altitude;
Status_t status;
} GPS_Pos_t;
// GPS coordinates for hold position
GPS_Pos_t holdPosition = { 0, 0, 0, INVALID };
// GPS coordinates for home position
GPS_Pos_t homePosition = { 0, 0, 0, INVALID };
// the current flight mode
FlightMode_t flightMode = GPS_FLIGHT_MODE_UNDEF;
// ---------------------------------------------------------------------------------
void navi_updateFlightMode(void) {
static FlightMode_t flightModeOld = GPS_FLIGHT_MODE_UNDEF;
if (controlMixer_getSignalQuality() <= SIGNAL_BAD
|| MKFlags & MKFLAG_EMERGENCY_FLIGHT) {
flightMode = GPS_FLIGHT_MODE_HOME;
} else {
if (dynamicParams.naviMode < 50)
flightMode = GPS_FLIGHT_MODE_FREE;
else if (dynamicParams.naviMode < 180)
flightMode = GPS_FLIGHT_MODE_AID;
else
flightMode = GPS_FLIGHT_MODE_HOME;
}
if (flightMode != flightModeOld) {
beep(100);
flightModeOld = flightMode;
}
debugOut.analog[31] = flightMode;
}
// ---------------------------------------------------------------------------------
// This function defines a good GPS signal condition
uint8_t navi_isGPSSignalOK(void) {
static uint8_t GPSFix = 0;
if ((GPSInfo.status != INVALID) && (GPSInfo.satfix == SATFIX_3D)
&& (GPSInfo.flags & FLAG_GPSFIXOK)
&& ((GPSInfo.satnum >= staticParams.GPSMininumSatellites) || GPSFix)) {
GPSFix = 1;
return 1;
} else
return (0);
}
// ---------------------------------------------------------------------------------
// rescale xy-vector length to limit
uint8_t navi_limitXY(int32_t *x, int32_t *y, int32_t limit) {
int32_t len;
len = isqrt32(*x * *x + *y * *y);
if (len > limit) {
// normalize control vector components to the limit
*x = (*x * limit) / len;
*y = (*y * limit) / len;
return 1;
}
return 0;
}
// checks nick and roll sticks for manual control
uint8_t navi_isManuallyControlled(int16_t* sticks) {
if (sticks[CONTROL_PITCH] < staticParams.naviStickThreshold
&& sticks[CONTROL_ROLL] < staticParams.naviStickThreshold)
return 0;
else
return 1;
}
// set given position to current gps position
uint8_t navi_writeCurrPositionTo(GPS_Pos_t * pGPSPos) {
if (pGPSPos == NULL)
return 0; // bad pointer
if (navi_isGPSSignalOK()) { // is GPS signal condition is fine
pGPSPos->longitude = GPSInfo.longitude;
pGPSPos->latitude = GPSInfo.latitude;
pGPSPos->altitude = GPSInfo.altitude;
pGPSPos->status = NEWDATA;
return 1;
} else { // bad GPS signal condition
pGPSPos->status = INVALID;
return 0;
}
}
// clear position
uint8_t navi_clearPosition(GPS_Pos_t * pGPSPos) {
if (pGPSPos == NULL)
return 0; // bad pointer
else {
pGPSPos->longitude = 0;
pGPSPos->latitude = 0;
pGPSPos->altitude = 0;
pGPSPos->status = INVALID;
}
return 1;
}
// calculates the GPS control stick values from the deviation to target position
// if the pointer to the target positin is NULL or is the target position invalid
// then the P part of the controller is deactivated.
void navi_PIDController(GPS_Pos_t *pTargetPos, int16_t* sticks) {
static int32_t PID_Nick, PID_Roll;
int32_t coscompass, sincompass;
int32_t GPSPosDev_North, GPSPosDev_East; // Position deviation in cm
int32_t P_North = 0, D_North = 0, P_East = 0, D_East = 0, I_North = 0, I_East = 0;
int32_t PID_North = 0, PID_East = 0;
static int32_t cos_target_latitude = 1;
static int32_t GPSPosDevIntegral_North = 0, GPSPosDevIntegral_East = 0;
static GPS_Pos_t *pLastTargetPos = 0;
// if GPS data and Compass are ok
if (navi_isGPSSignalOK() && (magneticHeading >= 0)) {
if (pTargetPos != NULL) { // if there is a target position
if (pTargetPos->status != INVALID) { // and the position data are valid
// if the target data are updated or the target pointer has changed
if ((pTargetPos->status != PROCESSED)
|| (pTargetPos != pLastTargetPos)) {
// reset error integral
GPSPosDevIntegral_North = 0;
GPSPosDevIntegral_East = 0;
// recalculate latitude projection
cos_target_latitude = cos_360(pTargetPos->latitude / 10000000L);
// remember last target pointer
pLastTargetPos = pTargetPos;
// mark data as processed
pTargetPos->status = PROCESSED;
}
// calculate position deviation from latitude and longitude differences
GPSPosDev_North = (GPSInfo.latitude - pTargetPos->latitude); // to calculate real cm we would need *111/100 additionally
GPSPosDev_East = (GPSInfo.longitude - pTargetPos->longitude); // to calculate real cm we would need *111/100 additionally
// calculate latitude projection
GPSPosDev_East *= cos_target_latitude;
GPSPosDev_East >>= LOG_MATH_UNIT_FACTOR;
} else { // no valid target position available
// reset error
GPSPosDev_North = 0;
GPSPosDev_East = 0;
// reset error integral
GPSPosDevIntegral_North = 0;
GPSPosDevIntegral_East = 0;
}
} else { // no target position available
// reset error
GPSPosDev_North = 0;
GPSPosDev_East = 0;
// reset error integral
GPSPosDevIntegral_North = 0;
GPSPosDevIntegral_East = 0;
}
//Calculate PID-components of the controller
// D-Part
D_North = ((int32_t) staticParams.naviD * GPSInfo.velnorth) >> 9;
D_East = ((int32_t) staticParams.naviD * GPSInfo.veleast) >> 9;
// P-Part
P_North = ((int32_t) staticParams.naviP * GPSPosDev_North) >> 11;
P_East = ((int32_t) staticParams.naviP * GPSPosDev_East) >> 11;
// I-Part
I_North = ((int32_t) staticParams.naviI * GPSPosDevIntegral_North) >> 13;
I_East = ((int32_t) staticParams.naviI * GPSPosDevIntegral_East) >> 13;
// combine P & I
PID_North = P_North + I_North;
PID_East = P_East + I_East;
if (!navi_limitXY(&PID_North, &PID_East, GPS_P_LIMIT)) {
// within limit
GPSPosDevIntegral_North += GPSPosDev_North >> 4;
GPSPosDevIntegral_East += GPSPosDev_East >> 4;
navi_limitXY(&GPSPosDevIntegral_North, &GPSPosDevIntegral_East, GPS_POSINTEGRAL_LIMIT);
}
// combine PI- and D-Part
PID_North += D_North;
PID_East += D_East;
// scale combination with gain.
// dongfang: Lets not do that. P I and D can be scaled instead.
// PID_North = (PID_North * (int32_t) staticParams.NaviGpsGain) / 100;
// PID_East = (PID_East * (int32_t) staticParams.NaviGpsGain) / 100;
// GPS to nick and roll settings
// A positive nick angle moves head downwards (flying forward).
// A positive roll angle tilts left side downwards (flying left).
// If compass heading is 0 the head of the copter is in north direction.
// A positive nick angle will fly to north and a positive roll angle will fly to west.
// In case of a positive north deviation/velocity the
// copter should fly to south (negative nick).
// In case of a positive east position deviation and a positive east velocity the
// copter should fly to west (positive roll).
// The influence of the GPSStickNick and GPSStickRoll variable is contrarily to the stick values
// in the flight.c. Therefore a positive north deviation/velocity should result in a positive
// GPSStickNick and a positive east deviation/velocity should result in a negative GPSStickRoll.
coscompass = cos_360(yawGyroHeading / GYRO_DEG_FACTOR_YAW);
sincompass = sin_360(yawGyroHeading / GYRO_DEG_FACTOR_YAW);
PID_Nick = (coscompass * PID_North + sincompass * PID_East) >> (LOG_MATH_UNIT_FACTOR-LOG_NAVI_STICK_GAIN);
PID_Roll = (sincompass * PID_North - coscompass * PID_East) >> (LOG_MATH_UNIT_FACTOR-LOG_NAVI_STICK_GAIN);
// limit resulting GPS control vector
navi_limitXY(&PID_Nick, &PID_Roll, staticParams.naviStickLimit << LOG_NAVI_STICK_GAIN);
debugOut.analog[27] = -PID_Nick;
debugOut.analog[28] = -PID_Roll;
sticks[CONTROL_PITCH] -= PID_Nick;
sticks[CONTROL_ROLL] -= PID_Roll;
} else { // invalid GPS data or bad compass reading
// reset error integral
GPSPosDevIntegral_North = 0;
GPSPosDevIntegral_East = 0;
}
}
void navigation_periodicTask(int16_t* sticks) {
static uint8_t GPS_P_Delay = 0;
static uint16_t beep_rythm = 0;
navi_updateFlightMode();
// store home position if start of flight flag is set
if (MKFlags & MKFLAG_CALIBRATE) {
MKFlags &= ~(MKFLAG_CALIBRATE);
if (navi_writeCurrPositionTo(&homePosition)) {
homePosition.latitude += 10000L;
beep(500);
}
}
switch (GPSInfo.status) {
case INVALID: // invalid gps data
if (flightMode != GPS_FLIGHT_MODE_FREE) {
beep(100); // beep if signal is neccesary
}
break;
case PROCESSED: // if gps data are already processed do nothing
// downcount timeout
if (GPSTimeout)
GPSTimeout--;
// if no new data arrived within timeout set current data invalid
// and therefore disable GPS
else {
GPSInfo.status = INVALID;
}
break;
case NEWDATA: // new valid data from gps device
// if the gps data quality is good
beep_rythm++;
if (navi_isGPSSignalOK()) {
switch (flightMode) { // check what's to do
case GPS_FLIGHT_MODE_FREE:
// update hold position to current gps position
navi_writeCurrPositionTo(&holdPosition); // can get invalid if gps signal is bad
// disable gps control
break;
case GPS_FLIGHT_MODE_AID:
if (holdPosition.status != INVALID) {
if (navi_isManuallyControlled(sticks)) { // MK controlled by user
// update hold point to current gps position
navi_writeCurrPositionTo(&holdPosition);
// disable gps control
GPS_P_Delay = 0;
} else { // GPS control active
if (GPS_P_Delay < 7) {
// delayed activation of P-Part for 8 cycles (8*0.25s = 2s)
GPS_P_Delay++;
navi_writeCurrPositionTo(&holdPosition); // update hold point to current gps position
navi_PIDController(NULL, sticks); // activates only the D-Part
} else
navi_PIDController(&holdPosition, sticks); // activates the P&D-Part
}
} else // invalid Hold Position
{ // try to catch a valid hold position from gps data input
navi_writeCurrPositionTo(&holdPosition);
}
break;
case GPS_FLIGHT_MODE_HOME:
if (homePosition.status != INVALID) {
// update hold point to current gps position
// to avoid a flight back if home comming is deactivated
navi_writeCurrPositionTo(&holdPosition);
if (navi_isManuallyControlled(sticks)) // MK controlled by user
{
} else {// GPS control active
navi_PIDController(&homePosition, sticks);
}
} else {
// bad home position
beep(50); // signal invalid home position
// try to hold at least the position as a fallback option
if (holdPosition.status != INVALID) {
if (navi_isManuallyControlled(sticks)) {
// MK controlled by user
} else {
// GPS control active
navi_PIDController(&holdPosition, sticks);
}
} else { // try to catch a valid hold position
navi_writeCurrPositionTo(&holdPosition);
}
}
break; // eof TSK_HOME
default: // unhandled task
break; // eof default
} // eof switch GPS_Task
} // eof gps data quality is good
else // gps data quality is bad
{ // disable gps control
if (flightMode != GPS_FLIGHT_MODE_FREE) {
// beep if signal is not sufficient
if (!(GPSInfo.flags & FLAG_GPSFIXOK) && !(beep_rythm % 5))
beep(100);
else if (GPSInfo.satnum < staticParams.GPSMininumSatellites
&& !(beep_rythm % 5))
beep(10);
}
}
// set current data as processed to avoid further calculations on the same gps data
GPSInfo.status = PROCESSED;
break;
} // eof GPSInfo.status
debugOut.analog[11] = GPSInfo.satnum;
}