Subversion Repositories FlightCtrl

Rev

Rev 1908 | Rev 1961 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

#ifndef _CONFIGURATION_H
#define _CONFIGURATION_H

#include <inttypes.h>
#include <avr/io.h>


#define MAX_CHANNELS 10
#define MAX_MOTORS 12

typedef struct {
  // IMU
  /*PMM*/uint8_t gyroP;
  /* P */uint8_t gyroD;
  /* P */uint8_t gyroI;
  /* P */uint8_t IFactor;
  uint8_t yawIFactor;
  /* P */uint8_t compassYawEffect;

  // Control
  /* P */uint8_t externalControl;

  /* P */uint8_t axisCoupling1;
  /* P */uint8_t axisCoupling2;
  /* P */uint8_t axisCouplingYawCorrection;
  /* P */uint8_t dynamicStability;
  uint8_t maxControlActivityForAcc;

  // Height control
  /*PMM*/uint8_t heightP;
  /*PMM*/uint8_t heightD;
  /* P */uint8_t heightSetting;
  /* P */uint8_t heightACCEffect;

  uint8_t attitudeControl;

  // The rest...
  /* P */uint8_t userParams[8];
  /*PMM*/uint8_t output0Timing;
  /*PMM*/uint8_t output1Timing;

  uint8_t servoManualControl[2];

  uint8_t motorSmoothing;
} dynamicParam_t;

extern dynamicParam_t dynamicParams;

typedef struct {
  uint8_t sourceIdx, targetIdx;
  uint8_t min, max;
} MMXLATION;

typedef struct {
  uint8_t sourceIdx, targetIdx;
} XLATION;

typedef struct {
  uint8_t checksum;
  uint8_t revisionNumber;
  uint8_t channels[MAX_CHANNELS];
} channelMap_t;
extern channelMap_t channelMap;

typedef struct {
  uint8_t checksum;
  uint8_t revision;
  int8_t name[12];
  int8_t motor[MAX_MOTORS][4];
}__attribute__((packed)) mixerMatrix_t;
extern mixerMatrix_t mixerMatrix;

typedef struct {
  uint8_t manualControl;
  uint8_t compensationFactor;
  uint8_t minValue;
  uint8_t maxValue;
  uint8_t flags;
} servo_t;

typedef struct {
  uint8_t bitmask;
  uint8_t timing;
} output_flash_t;

// values above 250 representing poti1 to poti4
typedef struct {
  // Global bitflags
  uint8_t bitConfig;  // see upper defines for bitcoding
  uint8_t bitConfig2; // see upper defines for bitcoding
 
  // Height Control
  uint8_t heightP; // Value : 0-32
  uint8_t heightD; // Value : 0-250
  uint8_t heightSetting; // Value : 0-32
  uint8_t heightMaxThrottleChange; // Value : 0-100
  uint8_t heightSlewRate; // Value : 0-50
  uint8_t heightACCEffect; // Value : 0-250

  // Attitude Control
  uint8_t attitudeControl;

  // Control
  uint8_t stickP; // Value : 1-6
  uint8_t stickD; // Value : 0-64
  uint8_t stickYawP; // Value : 1-20
  uint8_t stickThrottleD;
  uint8_t minThrottle; // Value : 0-32
  uint8_t maxThrottle; // Value : 33-250
  uint8_t externalControl; // for serial Control
  uint8_t maxControlActivityForAcc;

  // IMU
  uint8_t gyroPIDFilterConstant;
  uint8_t gyroATTFilterConstant;
  uint8_t gyroDFilterConstant;
  uint8_t accFilterConstant;

  uint8_t gyroP; // Value : 10-250
  uint8_t gyroI; // Value : 0-250
  uint8_t gyroD; // Value : 0-250

  uint8_t zerothOrderCorrection; // Value : 1-64
  uint8_t driftCompDivider; // 1/k  (Koppel_ACC_Wirkung)
  uint8_t driftCompLimit;   // limit for gyrodrift compensation

  uint8_t axisCoupling1; // Value: 0-250  Faktor, mit dem Yaw die Achsen Roll und Nick koppelt (NickRollMitkopplung)
  uint8_t axisCoupling2; // Value: 0-250  Faktor, mit dem Nick und Roll verkoppelt werden
  uint8_t axisCouplingYawCorrection;// Value: 0-250  Faktor, mit dem Nick und Roll verkoppelt werden

  uint8_t dynamicStability; // PID limit for Attitude controller
  uint8_t IFactor; // Value : 0-250
  uint8_t yawIFactor;
  uint8_t compassYawEffect; // Value : 0-32

  // Servos
  servo_t servoConfigurations[2]; // [PITCH, ROLL]
  uint8_t servoCount;

  // Battery warning and emergency flight
  uint8_t batteryVoltageWarning; // Value : 0-250
  uint8_t emergencyThrottle; // Value : 0-250     //Gaswert bei Empüngsverlust  /*
  uint8_t emergencyFlightDuration; // Value : 0-250     // Zeitbis auf EmergencyGas geschaltet wird, wg. Rx-Problemen

  // Outputs
  output_flash_t outputFlash[2];
  uint8_t outputDebugMask;
  // bit0: Test all OFF
  // bit1: Test all ON
  // bit2: flash when beeping
  uint8_t outputFlags;

  // User params
  uint8_t userParams[8]; // Value : 0-250

  // Name
  uint8_t name[12];
} paramset_t;
extern paramset_t staticParams;

// MKFlags
#define MKFLAG_MOTOR_RUN        (1<<0)
#define MKFLAG_FLY              (1<<1)
#define MKFLAG_CALIBRATE        (1<<2)
#define MKFLAG_START            (1<<3)
#define MKFLAG_EMERGENCY_FLIGHT (1<<4)
#define MKFLAG_RESERVE1         (1<<5)
#define MKFLAG_RESERVE2         (1<<6)
#define MKFLAG_RESERVE3         (1<<7)

// bit mask for staticParams.bitConfig
#define CFG_HEIGHT_CONTROL      (1<<0)
#define CFG_HEIGHT_SWITCH       (1<<1)
#define CFG_HEADING_HOLD        (1<<2)
#define CFG_COMPASS_ACTIVE      (1<<3)
#define CFG_COMPASS_FIX         (1<<4)
#define CFG_GPS_ACTIVE          (1<<5)
#define CFG_AXIS_COUPLING_ACTIVE (1<<6)
#define CFG_GYRO_SATURATION_PREVENTION  (1<<7)

// bit mask for staticParams.bitConfig2
#define CFG_LOOP_UP                 (1<<0)
#define CFG_LOOP_DOWN           (1<<1)
#define CFG_LOOP_LEFT           (1<<2)
#define CFG_LOOP_RIGHT          (1<<3)
#define CFG_HEIGHT_3SWITCH      (1<<4)

#define ATMEGA644       0
#define ATMEGA644P      1
#define SYSCLK F_CPU

// Not really a part of configuration, but LEDs and HW version test are the same.
#define RED_OFF   {if((boardRelease == 10) || (boardRelease == 20)) PORTB &=~(1<<PORTB0); else  PORTB |= (1<<PORTB0);}
#define RED_ON    {if((boardRelease == 10) || (boardRelease == 20)) PORTB |= (1<<PORTB0); else  PORTB &=~(1<<PORTB0);}
#define RED_FLASH PORTB ^= (1<<PORTB0)
#define GRN_OFF   {if(boardRelease  < 12) PORTB &=~(1<<PORTB1); else PORTB |= (1<<PORTB1);}
#define GRN_ON    {if(boardRelease  < 12) PORTB |= (1<<PORTB1); else PORTB &=~(1<<PORTB1);}
#define GRN_FLASH PORTB ^= (1<<PORTB1)

// Mixer table
#define MIX_THROTTLE    0
#define MIX_PITCH       1
#define MIX_ROLL        2
#define MIX_YAW         3

extern volatile uint8_t MKFlags;
extern uint8_t requiredMotors;
extern int16_t variables[8]; // The "Poti"s.
extern uint8_t boardRelease;
extern uint8_t CPUType;

void channelMap_default(void);
void paramSet_default(uint8_t setnumber);
void mixerMatrix_default(void);

void configuration_applyVariablesToParams(void);
uint8_t getCPUType(void);
uint8_t getBoardRelease(void);

#endif // _CONFIGURATION_H