// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Copyright (c) 04.2007 Holger Buss
// + Nur f�r den privaten Gebrauch
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Es gilt f�r das gesamte Projekt (Hardware, Software, Bin�rfiles, Sourcecode und Dokumentation),
// + dass eine Nutzung (auch auszugsweise) nur f�r den privaten und nicht-kommerziellen Gebrauch zul�ssig ist.
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt
// + bzgl. der Nutzungsbedingungen aufzunehmen.
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Best�ckung und Verkauf von Platinen oder Baus�tzen,
// + Verkauf von Luftbildaufnahmen, usw.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder ver�ffentlicht,
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright m�ssen dann beiliegen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts
// + auf anderen Webseiten oder Medien ver�ffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"
// + eindeutig als Ursprung verlinkt und genannt werden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Keine Gew�hr auf Fehlerfreiheit, Vollst�ndigkeit oder Funktion
// + Benutzung auf eigene Gefahr
// + Wir �bernehmen keinerlei Haftung f�r direkte oder indirekte Personen- oder Sachsch�den
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zul�ssig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Redistributions of source code (with or without modifications) must retain the above copyright notice,
// + this list of conditions and the following disclaimer.
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived
// + from this software without specific prior written permission.
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet
// + for non-commercial use (directly or indirectly)
// + Commercial use (for example: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted
// + with our written permission
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
// + clearly linked as origin
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// + POSSIBILITY OF SUCH DAMAGE.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#include <util/delay.h>
#include <stddef.h>
#include <string.h>
#include "configuration.h"
#include "sensors.h"
#include "rc.h"
//#include "uart0.h"
#include "output.h"
int16_t variables
[VARIABLE_COUNT
];
ParamSet_t staticParams
;
channelMap_t channelMap
;
mixerMatrix_t mixerMatrix
;
volatile dynamicParam_t dynamicParams
;
uint8_t CPUType
= ATMEGA644
;
uint8_t boardRelease
= 13;
uint8_t requiredMotors
;
VersionInfo_t versionInfo
;
// MK flags. TODO: Replace by enum. State machine.
uint16_t isFlying
= 0;
volatile uint8_t MKFlags
= 0;
/************************************************************************
* Map the parameter to pot values
* Replacing this code by the code below saved almost 1 kbyte.
************************************************************************/
void configuration_applyVariablesToParams
(void) {
uint8_t i
;
#define SET_POT_MM(b,a,min,max) {if (a>=255-VARIABLE_COUNT) b=variables[a+VARIABLE_COUNT-255]; else b=a; if(b<=min) b=min; else if(b>=max) b=max;}
#define SET_POT(b,a) {if (a>=255-VARIABLE_COUNT) b=variables[a+VARIABLE_COUNT-255]; else b=a;}
SET_POT_MM
(dynamicParams.
gyroP, staticParams.
gyroP, 5, 200);
SET_POT
(dynamicParams.
gyroI, staticParams.
gyroI);
SET_POT
(dynamicParams.
gyroD, staticParams.
gyroD);
SET_POT
(dynamicParams.
compassYawEffect,staticParams.
compassYawEffect);
SET_POT
(dynamicParams.
externalControl, staticParams.
externalControl);
SET_POT
(dynamicParams.
dynamicStability,staticParams.
dynamicStability);
SET_POT
(dynamicParams.
maxAccVector,staticParams.
maxAccVector);
SET_POT
(dynamicParams.
heightP, staticParams.
heightP);
SET_POT
(dynamicParams.
heightI, staticParams.
heightI);
SET_POT
(dynamicParams.
heightD, staticParams.
heightD);
SET_POT
(dynamicParams.
heightSetting,staticParams.
heightSetting);
SET_POT
(dynamicParams.
attitudeControl,staticParams.
attitudeControl);
SET_POT
(dynamicParams.
servoManualControl[0], staticParams.
servoConfigurations[0].
manualControl);
SET_POT
(dynamicParams.
servoManualControl[1], staticParams.
servoConfigurations[1].
manualControl);
SET_POT_MM
(dynamicParams.
output0Timing, staticParams.
outputFlash[0].
timing,1,255);
SET_POT_MM
(dynamicParams.
output1Timing, staticParams.
outputFlash[1].
timing,1,255);
SET_POT
(dynamicParams.
levelCorrection[0], staticParams.
levelCorrection[0]);
SET_POT
(dynamicParams.
levelCorrection[1], staticParams.
levelCorrection[1]);
SET_POT
(dynamicParams.
naviMode, staticParams.
naviMode);
for (i
=0; i
<sizeof(staticParams.
userParams); i
++) {
SET_POT
(dynamicParams.
userParams[i
],staticParams.
userParams[i
]);
}
}
const XLATION XLATIONS
[] = {
{offsetof(ParamSet_t
, heightSetting
), offsetof(dynamicParam_t
, heightSetting
)},
};
const MMXLATION MMXLATIONS
[] = {
{offsetof(ParamSet_t
, heightD
), offsetof(dynamicParam_t
, heightD
),0,100},
};
uint8_t configuration_applyVariableToParam
(uint8_t src
, uint8_t min
, uint8_t max
) {
uint8_t result
;
if (src
>=251) result
= variables
[src
-251];
else result
= src
;
if (result
< min
) result
= min
;
else if (result
> max
) result
= max
;
return result
;
}
void configuration_applyVariablesToParams_dead
(void) {
uint8_t i
, src
;
uint8_t* pointerToTgt
;
for(i
=0; i
<sizeof(XLATIONS
)/sizeof(XLATION
); i
++) {
src
= *((uint8_t*)(&staticParams
+ XLATIONS
[i
].
sourceIdx));
pointerToTgt
= (uint8_t*)(&dynamicParams
+ XLATIONS
[i
].
targetIdx);
if (src
< 255) {
*pointerToTgt
= configuration_applyVariableToParam
(src
, 0, 255);
}
}
for(i
=0; i
<sizeof(MMXLATIONS
)/sizeof(MMXLATION
); i
++) {
src
= *((uint8_t*)(&staticParams
+ MMXLATIONS
[i
].
sourceIdx));
pointerToTgt
= (uint8_t*)(&dynamicParams
+ XLATIONS
[i
].
targetIdx);
if (src
< 255) {
*pointerToTgt
= configuration_applyVariableToParam
(src
, MMXLATIONS
[i
].
min, MMXLATIONS
[i
].
max);
}
}
for (i
=0; i
<sizeof(staticParams.
userParams); i
++) {
src
= *((uint8_t*)(&staticParams
+ offsetof(ParamSet_t
, userParams
) + i
));
pointerToTgt
= (uint8_t*)(&dynamicParams
+ offsetof(dynamicParam_t
, userParams
) + i
);
if (src
< 255) {
*pointerToTgt
= configuration_applyVariableToParam
(src
, 0, 255);
}
}
}
uint8_t getCPUType
(void) { // works only after reset or power on when the registers have default values
uint8_t CPUType
= ATMEGA644
;
if((UCSR1A
== 0x20) && (UCSR1C
== 0x06)) CPUType
= ATMEGA644P
; // initial Values for 644P after reset
return CPUType
;
}
/*
* Automatic detection of hardware components is not supported in this development-oriented
* FC firmware. It would go against the point of it: To enable alternative hardware
* configurations with otherwise unsupported components. Instead, one should write
* custom code + adjust constants for the new hardware, and include the relevant code
* from the makefile.
* However - we still do detect the board release. Reason: Otherwise it would be too
* tedious to have to modify the code for how to turn on and off LEDs when deploying
* on different HW version....
*/
uint8_t getBoardRelease
(void) {
uint8_t boardRelease
= 13;
// the board release is coded via the pull up or down the 2 status LED
PORTB
&= ~
((1 << PORTB1
)|(1 << PORTB0
)); // set tristate
DDRB
&= ~
((1 << DDB0
)|(1 << DDB0
)); // set port direction as input
_delay_loop_2
(1000); // make some delay
switch( PINB
& ((1<<PINB1
)|(1<<PINB0
))) {
case 0x00:
boardRelease
= 10; // 1.0
break;
case 0x01:
boardRelease
= 11; // 1.1 or 1.2
break;
case 0x02:
boardRelease
= 20; // 2.0
break;
case 0x03:
boardRelease
= 13; // 1.3
break;
default:
break;
}
// set LED ports as output
DDRB
|= (1<<DDB1
)|(1<<DDB0
);
RED_OFF
;
GRN_OFF
;
return boardRelease
;
}
void setOtherDefaults
(void) {
// Height Control
staticParams.
airpressureFilterConstant = 8;
//staticParams.airpressureWindowLength = 0;
staticParams.
airpressureAccZCorrection = 128+56;
staticParams.
heightP = 10;
staticParams.
heightD = 30;
staticParams.
heightSetting = 251;
staticParams.
heightControlMaxThrottleChange = 10;
staticParams.
heightSlewRate = 4;
// Control
staticParams.
stickP = 8;
staticParams.
stickD = 12;
staticParams.
stickYawP = 12;
staticParams.
stickThrottleD = 12;
staticParams.
minThrottle = 8;
staticParams.
maxThrottle = 230;
staticParams.
externalControl = 0;
staticParams.
motorSmoothing = 0;
// IMU
staticParams.
gyroPIDFilterConstant = 1;
staticParams.
gyroATTFilterConstant = 1;
staticParams.
gyroDFilterConstant = 1;
staticParams.
accFilterConstant = 10;
staticParams.
gyroP = 60;
staticParams.
gyroI = 80;
staticParams.
gyroD = 4;
// set by gyro-specific code: gyro_setDefaults().
// staticParams.zerothOrderCorrection =
// staticParams.driftCompDivider =
// staticParams.driftCompLimit =
staticParams.
axisCoupling1 = 90;
staticParams.
axisCoupling2 = 67;
staticParams.
axisCouplingYawCorrection = 0;
staticParams.
dynamicStability = 50;
staticParams.
maxAccVector = 10;
staticParams.
IFactor = 32;
staticParams.
yawIFactor = 100;
staticParams.
compassYawEffect = 128;
staticParams.
levelCorrection[0] = staticParams.
levelCorrection[1] = 128;
// Servos
staticParams.
servoCount = 7;
staticParams.
servoManualMaxSpeed = 10;
for (uint8_t i
=0; i
<2; i
++) {
staticParams.
servoConfigurations[i
].
manualControl = 128;
staticParams.
servoConfigurations[i
].
stabilizationFactor = 0;
staticParams.
servoConfigurations[i
].
minValue = 32;
staticParams.
servoConfigurations[i
].
maxValue = 224;
staticParams.
servoConfigurations[i
].
flags = 0;
}
// Battery warning and emergency flight
staticParams.
batteryVoltageWarning = 101; // 3.7 each for 3S
staticParams.
emergencyThrottle = 35;
staticParams.
emergencyFlightDuration = 30;
// Outputs
staticParams.
outputFlash[0].
bitmask = 1; //0b01011111;
staticParams.
outputFlash[0].
timing = 15;
staticParams.
outputFlash[1].
bitmask = 3; //0b11110011;
staticParams.
outputFlash[1].
timing = 15;
staticParams.
outputDebugMask = 8;
staticParams.
outputFlags = OUTPUTFLAGS_FLASH_0_AT_BEEP
| OUTPUTFLAGS_FLASH_1_AT_BEEP
| OUTPUTFLAGS_USE_ONBOARD_LEDS
;
staticParams.
naviMode = 200; // free.
}
/***************************************************/
/* Default Values for parameter set 1 */
/***************************************************/
void paramSet_default
(uint8_t setnumber
) {
setOtherDefaults
();
gyro_setDefaultParameters
();
for (uint8_t i
=0; i
<8; i
++) {
staticParams.
userParams[i
] = 0;
}
staticParams.
bitConfig =
CFG_GYRO_SATURATION_PREVENTION
| CFG_HEADING_HOLD
| CFG_COMPASS_ACTIVE
;
memcpy(staticParams.
name, "Default\0", 6);
}
/***************************************************/
/* Default Values for Mixer Table */
/***************************************************/
void mixerMatrix_default
(void) { // Quadro
uint8_t i
;
// mixerMatric.revision = EEMIXER_REVISION;
// clear mixer table (but preset throttle)
for (i
= 0; i
< 16; i
++) {
mixerMatrix.
motor[i
][MIX_THROTTLE
] = i
< 4 ? 64 : 0;
mixerMatrix.
motor[i
][MIX_PITCH
] = 0;
mixerMatrix.
motor[i
][MIX_ROLL
] = 0;
mixerMatrix.
motor[i
][MIX_YAW
] = 0;
}
// default = Quadro
mixerMatrix.
motor[0][MIX_PITCH
] = +64;
mixerMatrix.
motor[0][MIX_YAW
] = +64;
mixerMatrix.
motor[1][MIX_PITCH
] = -64;
mixerMatrix.
motor[1][MIX_YAW
] = +64;
mixerMatrix.
motor[2][MIX_ROLL
] = -64;
mixerMatrix.
motor[2][MIX_YAW
] = -64;
mixerMatrix.
motor[3][MIX_ROLL
] = +64;
mixerMatrix.
motor[3][MIX_YAW
] = -64;
memcpy(mixerMatrix.
name, "Quadro\0", 7);
/*
// default = X
mixerMatrix.motor[0][MIX_PITCH] = +45;
mixerMatrix.motor[0][MIX_ROLL] = +45;
mixerMatrix.motor[0][MIX_YAW] = +64;
mixerMatrix.motor[1][MIX_PITCH] = -45;
mixerMatrix.motor[1][MIX_ROLL] = -45;
mixerMatrix.motor[1][MIX_YAW] = +64;
mixerMatrix.motor[2][MIX_PITCH] = +45;
mixerMatrix.motor[2][MIX_ROLL] = -45;
mixerMatrix.motor[2][MIX_YAW] = -64;
mixerMatrix.motor[3][MIX_PITCH] = -45;
mixerMatrix.motor[3][MIX_ROLL] = +45;
mixerMatrix.motor[3][MIX_YAW] = -64;
*/
memcpy(mixerMatrix.
name, "X\0", 7);
}
/***************************************************/
/* Default Values for R/C Channels */
/***************************************************/
void channelMap_default
(void) {
channelMap.
channels[CH_PITCH
] = 1;
channelMap.
channels[CH_ROLL
] = 0;
channelMap.
channels[CH_THROTTLE
] = 2;
channelMap.
channels[CH_YAW
] = 3;
channelMap.
channels[CH_POTS
+ 0] = 4;
channelMap.
channels[CH_POTS
+ 1] = 5;
channelMap.
channels[CH_POTS
+ 2] = 6;
channelMap.
channels[CH_POTS
+ 3] = 7;
}