Rev 2492 |
Blame |
Compare with Previous |
Last modification |
View Log
| RSS feed
#include <inttypes.h>
#include "main.h"
uint16_t LED1_Timing = 0;
uint16_t LED2_Timing = 0;
unsigned char J16Blinkcount = 0, J16Mask = 1;
unsigned char J17Blinkcount = 0, J17Mask = 1;
unsigned char NC_Wait_for_LED = 0; // signal to NC: Wait for the LAD PAtter before switching to the next WP
// initializes the LED control outputs J16, J17
void LED_Init(void)
{
// set PC2 & PC3 as output (control of J16 & J17)
DDRC |= (1<<DDC2)|(1<<DDC3);
J16_OFF;
J17_OFF;
J16Blinkcount = 0; J16Mask = 128;
J17Blinkcount = 0; J17Mask = 128;
}
// called in UpdateMotors() every 2ms
void LED_Update(void)
{
static char delay = 0;
static unsigned char J16Bitmask = 0;
static unsigned char J17Bitmask = 0;
static unsigned char J16Warn = 0, J17Warn = 0;
static unsigned char from_nc = 0; // Copy for the timing
if(FromNC_WP_EventChannel_New) from_nc = FromNC_WP_EventChannel_New;
if(!delay--) // 20ms Intervall
{
J16Bitmask = EE_Parameter.J16Bitmask;
J17Bitmask = EE_Parameter.J17Bitmask;
delay = 9;
if(FC_StatusFlags & (FC_STATUS_LOWBAT | FC_STATUS_EMERGENCY_LANDING) || (VersionInfo.HardwareError[1] & FC_ERROR1_I2C))
{
if(EE_Parameter.WARN_J16_Bitmask)
{
if(!J16Warn) J16Blinkcount = 4;
J16Warn = 1;
}
if(EE_Parameter.WARN_J17_Bitmask)
{
if(!J17Warn) J17Blinkcount = 4;
J17Warn = 1;
}
}
else
{
J16Warn = 0;
J17Warn = 0;
}
//DebugOut.Analog[29] = EE_Parameter.GlobalConfig3;
// Output 1
if(!J16Warn)
{
if((EE_Parameter.BitConfig & CFG_MOTOR_BLINK1) && !MotorenEin) {if(EE_Parameter.BitConfig & CFG_MOTOR_OFF_LED1) J16_ON; else J16_OFF;}
else
if((EE_Parameter.J16Timing > 247) && (Parameter_J16Timing > 220)) {if(J16Bitmask & 128) J16_OFF; else J16_ON; J16Mask = 1; NC_Wait_for_LED = 0;} // Manual overwrite
else
if((EE_Parameter.J16Timing > 247) && (Parameter_J16Timing == 5)) {if(J16Bitmask & 128) J16_ON; else J16_OFF; J16Mask = 1; NC_Wait_for_LED = 0;} // Manual overwrite
else
if(!J16Blinkcount--)
{
if(EE_Parameter.GlobalConfig3 & CFG3_USE_NC_FOR_OUT1)
{
J16Blinkcount = from_nc / 2;
if(!from_nc) { NC_Wait_for_LED = 0; if(J16Bitmask & 128) J16_ON; else J16_OFF; J16Mask = 0; } // Ausschalten
else
{
NC_Wait_for_LED = 1;
if(J16Mask == 0)
{
from_nc = FromNC_WP_EventChannel_New;
FromNC_WP_EventChannel_New = 0;
J16Mask = 64;
if(J16Bitmask & 128) J16_ON; else J16_OFF; // Ausschalten
}
else
{
if(J16Mask & J16Bitmask) J16_ON; else J16_OFF;
J16Mask /= 2;
}
}
}
else
{
J16Blinkcount = Parameter_J16Timing / 2;
if(J16Mask == 1) { from_nc = 0; J16Mask = 64; } else J16Mask /= 2;
if(J16Mask & J16Bitmask) J16_ON; else J16_OFF;
NC_Wait_for_LED = 0;
}
}
}
else // warning case
if(!J16Blinkcount--)
{
J16Blinkcount = 10-1;
if(J16Mask == 1) J16Mask = 128; else J16Mask /= 2;
if(J16Mask & EE_Parameter.WARN_J16_Bitmask) J16_ON; else J16_OFF;
}
// Output 2
if(!J17Warn)
{
if((EE_Parameter.BitConfig & CFG_MOTOR_BLINK2) && !MotorenEin) {if(EE_Parameter.BitConfig & CFG_MOTOR_OFF_LED2) J17_ON; else J17_OFF;}
else
if((EE_Parameter.J17Timing > 247) && (Parameter_J17Timing > 220)) {if(J17Bitmask & 128) J17_OFF; else J17_ON; J17Mask = 1;}
else
if((EE_Parameter.J17Timing > 247) && (Parameter_J17Timing == 5)) {if(J17Bitmask & 128) J17_ON; else J17_OFF; J17Mask = 1;}
else
if(!J17Blinkcount--)
{
J17Blinkcount = Parameter_J17Timing / 2;
if(J17Mask == 1) J17Mask = 64; else J17Mask /= 2;
if(J17Mask & J17Bitmask) J17_ON; else J17_OFF;
}
}
else // warning case
if(!J17Blinkcount--)
{
J17Blinkcount = 10-1;
if(J17Mask == 1) J17Mask = 128; else J17Mask /= 2;
if(J17Mask & EE_Parameter.WARN_J17_Bitmask) J17_ON; else J17_OFF;
}
if(PORTC & (1<<PORTC2)) FC_StatusFlags2 |= FC_STATUS2_OUT1_ACTIVE; //else FC_StatusFlags2 &= ~FC_STATUS2_OUT1_ACTIVE; // Out1 (J16) -> wird in der SPI zurück gesetzt
if(PORTC & (1<<PORTC3)) FC_StatusFlags2 |= FC_STATUS2_OUT2_ACTIVE; else FC_StatusFlags2 &= ~FC_STATUS2_OUT2_ACTIVE; // Out2 (J17)
}
}