Subversion Repositories FlightCtrl

#include <ADXL345.h>
#include <HMC5843.h>
#include <ITG3200.h>

//#define DEBUG
#include "DebugUtils.h"

#include "FreeIMU.h"
#include <Wire.h>

int raw_values[9];
char str[512];
float val[9], q[4];

unsigned long start, stop;

// Set the default object
FreeIMU my3IMU = FreeIMU();

void setup() { 
  Serial.begin(115200);
  Wire.begin();
  
  delay(500);
  my3IMU.init(true); // the parameter enable or disable fast mode
  delay(500);
}

void loop() {
  Serial.println("Testing raw reading speed (average on 1024 samples):");
  start = micros();
  for(int i=0; i<1024; i++) {
    my3IMU.getRawValues(raw_values);
  }
  stop = micros();
  Serial.print("--> result: ");
  Serial.print((stop - start) / 1024);
  Serial.print(" microseconds .... ");
  Serial.print(((stop - start) / 1024) / 1000);
  Serial.println(" milliseconds");
  
  
  Serial.println("Testing calibrated reading speed (average on 1024 samples):");
  start = micros();
  for(int i=0; i<1024; i++) {
    my3IMU.getValues(val);
  }
  stop = micros();
  Serial.print("--> result: ");
  Serial.print((stop - start) / 1024);
  Serial.print(" microseconds .... ");
  Serial.print(((stop - start) / 1024) / 1000);
  Serial.println(" milliseconds");
  
  
  Serial.println("Testing sensor fusion speed (average on 1024 samples):");
  start = micros();
  for(int i=0; i<1024; i++) {
    my3IMU.getQ(q);
  }
  stop = micros();
  Serial.print("--> result: ");
  Serial.print((stop - start) / 1024);
  Serial.print(" microseconds .... ");
  Serial.print(((stop - start) / 1024) / 1000);
  Serial.println(" milliseconds");
  
  
  Serial.println("Looping again..");
  Serial.println("----");
}