Rev 685 |
Blame |
Last modification |
View Log
| RSS feed
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Copyright (c) 04.2007 Holger Buss
// + only for non-profit use
// + www.MikroKopter.com
// + see the File "License.txt" for further Informations
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#include <inttypes.h>
#include "main.h"
#include "eeprom.h"
#include "timer2.h"
#include "fc.h"
#include "rc.h"
#include "uart.h"
#include "printf_P.h"
#include "analog.h"
#include "_Settings.h"
uint16_t TestInt = 0;
#define ARRAYSIZE 10
uint8_t Array[ARRAYSIZE] = {1,2,3,4,5,6,7,8,9,10};
#define DISPLAYBUFFSIZE 80
int8_t DisplayBuff[DISPLAYBUFFSIZE] = "Hello World";
uint8_t DispPtr = 0;
uint8_t RemoteButtons = 0;
#define KEY1 0x01
#define KEY2 0x02
#define KEY3 0x04
#define KEY4 0x08
#define KEY5 0x10
/************************************/
/* Clear LCD Buffer */
/************************************/
void LCD_Clear(void)
{
uint8_t i;
for( i = 0; i < DISPLAYBUFFSIZE; i++) DisplayBuff[i] = ' ';
}
/************************************/
/* Update Menu on LCD */
/************************************/
// Display with 20 characters in 4 lines
void LCD_PrintMenu(void)
{
static uint8_t MaxMenuItem = 11, MenuItem=0;
// if KEY1 is activated goto previous menu item
if(RemoteButtons & KEY1)
{
if(MenuItem) MenuItem--;
else MenuItem = MaxMenuItem;
LCD_Clear();
RemotePollDisplayLine = -1;
}
// if KEY2 is activated goto next menu item
if(RemoteButtons & KEY2)
{
if (MenuItem == MaxMenuItem) MenuItem = 0;
else MenuItem++;
LCD_Clear();
RemotePollDisplayLine = -1;
}
// if KEY1 and KEY2 is activated goto initial menu item
if((RemoteButtons & KEY1) && (RemoteButtons & KEY2)) MenuItem = 0;
// print menu item number in the upper right corner
if(MenuItem < 10)
{
LCD_printfxy(17,0,"[%i]",MenuItem);
}
else
{
LCD_printfxy(16,0,"[%i]",MenuItem);
}
switch(MenuItem)
{
case 0:// Version Info Menu Item
LCD_printfxy(0,0,"+ MikroKopter +");
LCD_printfxy(0,1,"HW:V%d.%d SW:%d.%d%c",BoardRelease/10,BoardRelease%10,VERSION_HAUPTVERSION, VERSION_NEBENVERSION,VERSION_INDEX+'a');
LCD_printfxy(0,2,"Setting: %d ", GetActiveParamSet());
LCD_printfxy(0,3,"(c) Holger Buss");
break;
case 1:// Hight Control Menu Item
if(ParamSet.GlobalConfig & CFG_HOEHENREGELUNG)
{
LCD_printfxy(0,0,"Hoehe: %5i",HoehenWert);
LCD_printfxy(0,1,"SollHoehe: %5i",SollHoehe);
LCD_printfxy(0,2,"Luftdruck: %5i",MessLuftdruck);
LCD_printfxy(0,3,"Off : %5i",DruckOffsetSetting);
}
else
{
LCD_printfxy(0,1,"Keine ");
LCD_printfxy(0,2,"Höhenregelung");
}
break;
case 2:// Attitude Menu Item
LCD_printfxy(0,0,"akt. Lage");
LCD_printfxy(0,1,"Nick: %5i",IntegralNick/1024);
LCD_printfxy(0,2,"Roll: %5i",IntegralRoll/1024);
LCD_printfxy(0,3,"Kompass: %5i",KompassValue);
break;
case 3:// Remote Control Channel Menu Item
LCD_printfxy(0,0,"K1:%4i K2:%4i ",PPM_in[1],PPM_in[2]);
LCD_printfxy(0,1,"K3:%4i K4:%4i ",PPM_in[3],PPM_in[4]);
LCD_printfxy(0,2,"K5:%4i K6:%4i ",PPM_in[5],PPM_in[6]);
LCD_printfxy(0,3,"K7:%4i K8:%4i ",PPM_in[7],PPM_in[8]);
break;
case 4:// Remote Control Mapping Menu Item
LCD_printfxy(0,0,"Ni:%4i Ro:%4i ",PPM_in[ParamSet.Kanalbelegung[K_NICK]],PPM_in[ParamSet.Kanalbelegung[K_ROLL]]);
LCD_printfxy(0,1,"Gs:%4i Gi:%4i ",PPM_in[ParamSet.Kanalbelegung[K_GAS]],PPM_in[ParamSet.Kanalbelegung[K_GIER]]);
LCD_printfxy(0,2,"P1:%4i P2:%4i ",PPM_in[ParamSet.Kanalbelegung[K_POTI1]],PPM_in[ParamSet.Kanalbelegung[K_POTI2]]);
LCD_printfxy(0,3,"P3:%4i P4:%4i ",PPM_in[ParamSet.Kanalbelegung[K_POTI3]],PPM_in[ParamSet.Kanalbelegung[K_POTI4]]);
break;
case 5:// Gyro Sensor Menu Item
LCD_printfxy(0,0,"Gyro - Sensor");
if(BoardRelease == 10)
{
LCD_printfxy(0,1,"Nick %4i (%3i)",AdValueGyrNick - AdNeutralNick, AdNeutralNick);
LCD_printfxy(0,2,"Roll %4i (%3i)",AdValueGyrRoll - AdNeutralRoll, AdNeutralRoll);
LCD_printfxy(0,3,"Gier %4i (%3i)",MesswertGier, AdNeutralGier);
}
else
{
LCD_printfxy(0,1,"Nick %4i (%3i)",AdValueGyrNick - AdNeutralNick, AdNeutralNick/2);
LCD_printfxy(0,2,"Roll %4i (%3i)",AdValueGyrRoll - AdNeutralRoll, AdNeutralRoll/2);
LCD_printfxy(0,3,"Gier %4i (%3i)",MesswertGier, AdNeutralGier/2);
}
break;
case 6:// Acceleration Sensor Menu Item
LCD_printfxy(0,0,"ACC - Sensor");
LCD_printfxy(0,1,"Nick %4i (%3i)",AdValueAccNick,NeutralAccX);
LCD_printfxy(0,2,"Roll %4i (%3i)",AdValueAccRoll,NeutralAccY);
LCD_printfxy(0,3,"Hoch %4i (%3i)",Mittelwert_AccHoch/*accumulate_AccHoch / messanzahl_AccHoch*/,(int)NeutralAccZ);
break;
case 7:// Accumulator Voltage / Remote Control Level
LCD_printfxy(0,1,"Spannung: %5i",UBat);
LCD_printfxy(0,2,"Empf.Pegel:%5i",SenderOkay);
break;
case 8:// Compass Menu Item
LCD_printfxy(0,0,"Kompass ");
LCD_printfxy(0,1,"Richtung: %5i",KompassRichtung);
LCD_printfxy(0,2,"Messwert: %5i",KompassValue);
LCD_printfxy(0,3,"Start: %5i",KompassStartwert);
break;
case 9:// Poti Menu Item
LCD_printfxy(0,0,"Poti1: %3i",Poti1);
LCD_printfxy(0,1,"Poti2: %3i",Poti2);
LCD_printfxy(0,2,"Poti3: %3i",Poti3);
LCD_printfxy(0,3,"Poti4: %3i",Poti4);
break;
case 10:// Servo Menu Item
LCD_printfxy(0,0,"Servo " );
LCD_printfxy(0,1,"Setpoint %3i",Parameter_ServoNickControl);
LCD_printfxy(0,2,"Stellung: %3i",ServoValue);
LCD_printfxy(0,3,"Range:%3i-%3i",ParamSet.ServoNickMin,ParamSet.ServoNickMax);
break;
case 11://Extern Control
LCD_printfxy(0,0,"ExternControl " );
LCD_printfxy(0,1,"Ni:%4i Ro:%4i ",ExternControl.Nick,ExternControl.Roll);
LCD_printfxy(0,2,"Gs:%4i Gi:%4i ",ExternControl.Gas,ExternControl.Gier);
LCD_printfxy(0,3,"Hi:%4i Cf:%4i ",ExternControl.Hight,ExternControl.Config);
break;
default: MaxMenuItem = MenuItem - 1;
MenuItem = 0;
break;
}
RemoteButtons = 0;
}