Rev 764 |
Blame |
Last modification |
View Log
| RSS feed
#include <inttypes.h>
#include <stdlib.h>
#include "fc.h"
#include "ubx.h"
#include "mymath.h"
#include "timer0.h"
#include "uart.h"
#define TSK_IDLE 0
#define TSK_HOLD 1
#define TSK_HOME 2
#define GPS_STICK_SENSE 20 // must be at least in a range where 90% of the trimming does not switch of the GPS function
#define GPS_STICK_LIMIT 45 // limit of gps stick control to avoid critical flight attitudes
#define GPS_D_LIMIT_DIST 2000 // for position deviations grater than 500 cm (20m) the D-Part of the PD-Controller is limited
#define GPS_D_LIMIT 50 // PD-Controntroller D-Limit.
int16_t GPS_Pitch
= 0;
int16_t GPS_Roll
= 0;
int32_t GPS_P_Factor
= 0, GPS_D_Factor
= 0;
int32_t GPSPosDev_North
= 0, GPSPosDev_East
= 0;
typedef struct
{
int32_t Northing
;
int32_t Easting
;
uint8_t Status
;
} GPS_Pos_t
;
// GPS coordinates for hold position
GPS_Pos_t HoldPosition
= {0,0, INVALID
};
// GPS coordinates for home position
GPS_Pos_t HomePosition
= {0,0, INVALID
};
// ---------------------------------------------------------------------------------
// set home position to current hold positon
void GPS_SetHomePosition
(void)
{
HomePosition.
Northing = HoldPosition.
Northing;
HomePosition.
Easting = HoldPosition.
Easting;
HomePosition.
Status = HoldPosition.
Status;
if(HomePosition.
Status == VALID
) BeepTime
= 1000; // signal if new home position was set
}
// clear home position
void GPS_ClearHomePosition
(void)
{
HomePosition.
Status = INVALID
;
}
// disable GPS control sticks
void GPS_Neutral
(void)
{
GPS_Pitch
= 0;
GPS_Roll
= 0;
}
// calculates the GPS control sticks values from the deviation to target position
void GPS_PDController
(GPS_Pos_t
*TargetPos
)
{
int32_t coscompass
, sincompass
;
int32_t P_North
= 0, D_North
= 0, P_East
= 0, D_East
= 0;
int32_t PD_North
= 0, PD_East
= 0;
if( (TargetPos
->Status
== VALID
) && (GPSInfo.
status == VALID
) && (GPSInfo.
satfix == SATFIX_3D
))
{
GPSPosDev_North
= GPSInfo.
utmnorth - TargetPos
->Northing
;
GPSPosDev_East
= GPSInfo.
utmeast - TargetPos
->Easting
;
DebugOut.
Analog[12] = GPSPosDev_North
;
DebugOut.
Analog[13] = GPSPosDev_East
;
//DebugOut.Analog[12] = GPSInfo.velnorth;
//DebugOut.Analog[13] = GPSInfo.veleast;
//Calculate PD-components of the controller (negative sign for compensation)
P_North
= -(GPS_P_Factor
* GPSPosDev_North
)/2048;
D_North
= -(GPS_D_Factor
* GPSInfo.
velnorth)/512;
P_East
= -(GPS_P_Factor
* GPSPosDev_East
)/2048;
D_East
= -(GPS_D_Factor
* GPSInfo.
veleast)/512;
if( (abs(GPSPosDev_North
) > GPS_D_LIMIT_DIST
) || (abs(GPSPosDev_East
) > GPS_D_LIMIT_DIST
) )
{
if (D_North
> GPS_D_LIMIT
) D_North
= GPS_D_LIMIT
;
else if (D_North
< -GPS_D_LIMIT
) D_North
= -GPS_D_LIMIT
;
if (D_East
> GPS_D_LIMIT
) D_East
= GPS_D_LIMIT
;
else if (D_East
< -GPS_D_LIMIT
) D_East
= -GPS_D_LIMIT
;
}
// PD-controller
PD_North
= P_North
+ D_North
;
PD_East
= P_East
+ D_East
;
// GPS to pitch and roll settings
//A positive pitch angle moves head downwards (flying forward).
//A positive roll angle tilts left side downwards (flying left).
// If compass heading is 0 the head of the copter is in north direction.
// A positive pitch angle will fly to north and a positive roll angle will fly to west.
// In case of a positive north deviation/velocity the
// copter should fly to south (negative pitch).
// In case of a positive east position deviation and a positive east velocity the
// copter should fly to west (positive roll).
// The influence of the GPS_Pitch and GPS_Roll variable is contrarily to the stick values
// in the fc.c. Therefore a positive north deviation/velocity should result in a positive
// GPS_Pitch and a positive east deviation/velocity should result in a negative GPS_Roll.
// rotation transformation to compass heading to match any copter orientation
if (CompassHeading
< 0) // no valid compass data
{ // disable GPS
GPS_Neutral
();
}
else
{
coscompass
= (int32_t)c_cos_8192
(CompassHeading
);
sincompass
= (int32_t)c_sin_8192
(CompassHeading
);
GPS_Roll
= (int16_t)((coscompass
* PD_East
- sincompass
* PD_North
) / 8192);
GPS_Pitch
= -1*(int16_t)((sincompass
* PD_East
+ coscompass
* PD_North
) / 8192);
}
// limit GPS controls
if (GPS_Pitch
> GPS_STICK_LIMIT
) GPS_Pitch
= GPS_STICK_LIMIT
;
else if (GPS_Pitch
< -GPS_STICK_LIMIT
) GPS_Pitch
= -GPS_STICK_LIMIT
;
if (GPS_Roll
> GPS_STICK_LIMIT
) GPS_Roll
= GPS_STICK_LIMIT
;
else if (GPS_Roll
< -GPS_STICK_LIMIT
) GPS_Roll
= -GPS_STICK_LIMIT
;
}
else // invalid input data
{
BeepTime
= 50;
GPS_Neutral
();
}
}
void GPS_Main
(uint8_t ctrl
)
{
static uint8_t GPS_Task
= TSK_IDLE
;
int16_t satbeep
;
// ctrl enables the gps feature
if(ctrl
< 70) GPS_Task
= TSK_IDLE
;
else if (ctrl
< 160) GPS_Task
= TSK_HOLD
;
else GPS_Task
= TSK_HOME
; // ctrl >= 160
switch(GPSInfo.
status)
{
case INVALID
: // invalid gps data
GPS_Neutral
();
if(GPS_Task
!= TSK_IDLE
)
{
BeepTime
= 100; // beep if signal is neccesary
}
break;
case PROCESSED
: // if gps data are already processed
// downcount timeout
if(GPSTimeout
) GPSTimeout
--;
// if no new data arrived within timeout set current data invalid
// and therefore disable GPS
else
{
GPS_Neutral
();
GPSInfo.
status = INVALID
;
}
break;
case VALID
: // new valid data from gps device
// if the gps data quality is sufficient
if (GPSInfo.
satfix == SATFIX_3D
)
{
switch(GPS_Task
) // check what's to do
{
case TSK_IDLE
:
// update hold point to current gps position
HoldPosition.
Northing = GPSInfo.
utmnorth;
HoldPosition.
Easting = GPSInfo.
utmeast;
HoldPosition.
Status = VALID
;
// disable gps control
GPS_Neutral
();
break; // eof TSK_IDLE
case TSK_HOLD
:
if(HoldPosition.
Status == VALID
)
{
// if sticks are centered (no manual control)
if ((MaxStickPitch
< GPS_STICK_SENSE
) && (MaxStickRoll
< GPS_STICK_SENSE
))
{
GPS_PDController
(&HoldPosition
);
}
else // MK controlled by user
{
// update hold point to current gps position
HoldPosition.
Northing = GPSInfo.
utmnorth;
HoldPosition.
Easting = GPSInfo.
utmeast;
HoldPosition.
Status = GPSInfo.
status;
// disable gps control
GPS_Neutral
();
}
}
break; // eof TSK_HOLD
case TSK_HOME
:
if(HomePosition.
Status == VALID
)
{
// update hold point to current gps position
// to avoid a flight back if home comming is deactivated
HoldPosition.
Northing = GPSInfo.
utmnorth;
HoldPosition.
Easting = GPSInfo.
utmeast;
HoldPosition.
Status = GPSInfo.
status;
// if sticks are centered (no manual control)
if((MaxStickPitch
< GPS_STICK_SENSE
) && (MaxStickRoll
< GPS_STICK_SENSE
))
{
GPS_PDController
(&HomePosition
);
}
else // manual control
{
GPS_Neutral
();
}
}
else // bad home position
{
BeepTime
= 50; // signal invalid home position
// try to hold at least the position as a fallback option
// if sticks are centered (no manual control)
if((MaxStickPitch
< GPS_STICK_SENSE
) && (MaxStickRoll
< GPS_STICK_SENSE
) && (HoldPosition.
Status == VALID
))
{
GPS_PDController
(&HoldPosition
);
}
else // manual control or no rteference position
{
GPS_Neutral
();
}
}
break; // eof TSK_HOME
default: // unhandled task
GPS_Neutral
();
break; // eof default
} // eof switch GPS_Task
} // eof 3D-FIX
else // no 3D-SATFIX
{ // disable gps control
GPS_Neutral
();
if(GPS_Task
!= TSK_IDLE
)
{
satbeep
= 1800 - (int16_t)GPSInfo.
satnum * 225; // is zero at 8 sats
if (satbeep
< 0) satbeep
= 0;
BeepTime
= 50 + (uint16_t)satbeep
; // max 1850 * 0.1 ms =
}
}
// set current data as processed to avoid further calculations on the same gps data
GPSInfo.
status = PROCESSED
;
break;
} // eof GPSInfo.status
DebugOut.
Analog[14] = GPS_Pitch
;
DebugOut.
Analog[15] = GPS_Roll
;
}