Blame |
Last modification |
View Log
| RSS feed
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Copyright (c) 04.2007 Holger Buss
// + Nur für den privaten Gebrauch
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist.
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt
// + bzgl. der Nutzungsbedingungen aufzunehmen.
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen,
// + Verkauf von Luftbildaufnahmen, usw.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"
// + eindeutig als Ursprung verlinkt werden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion
// + Benutzung auf eigene Gefahr
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zulässig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Redistributions of source code (with or without modifications) must retain the above copyright notice,
// + this list of conditions and the following disclaimer.
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived
// + from this software without specific prior written permission.
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet
// + for non-commercial use (directly or indirectly)
// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted
// + with our written permission
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
// + clearly linked as origin
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// + POSSIBILITY OF SUCH DAMAGE.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#include <inttypes.h>
#include <stdlib.h>
#include "fc.h"
#include "ubx.h"
#include "mymath.h"
#include "timer0.h"
#include "uart0.h"
#include "rc.h"
#include "eeprom.h"
typedef enum
{
GPS_FLIGHT_MODE_UNDEF
,
GPS_FLIGHT_MODE_FREE
,
GPS_FLIGHT_MODE_AID
,
GPS_FLIGHT_MODE_HOME
,
} FlightMode_t
;
#define GPS_POSINTEGRAL_LIMIT 32000
// #define GPS_STICK_LIMIT 45 // limit of gps stick control to avoid critical flight attitudes
// #define GPS_P_LIMIT 25
typedef struct
{
int32_t Longitude
;
int32_t Latitude
;
int32_t Altitude
;
Status_t Status
;
} GPS_Pos_t
;
// GPS coordinates for hold position
GPS_Pos_t HoldPosition
= {0,0,0,INVALID
};
// GPS coordinates for home position
GPS_Pos_t HomePosition
= {0,0,0,INVALID
};
// the current flight mode
FlightMode_t FlightMode
= GPS_FLIGHT_MODE_UNDEF
;
// ---------------------------------------------------------------------------------
void GPS_UpdateParameter
(void)
{
static FlightMode_t FlightModeOld
= GPS_FLIGHT_MODE_UNDEF
;
if((RC_Quality
< 100) || (MKFlags
& MKFLAG_EMERGENCY_LANDING
))
{
FlightMode
= GPS_FLIGHT_MODE_FREE
;
}
else
{
if (FCParam.
NaviGpsModeControl < 50) FlightMode
= GPS_FLIGHT_MODE_AID
;
else if(FCParam.
NaviGpsModeControl < 180) FlightMode
= GPS_FLIGHT_MODE_FREE
;
else FlightMode
= GPS_FLIGHT_MODE_HOME
;
}
if (FlightMode
!= FlightModeOld
)
{
BeepTime
= 100;
}
FlightModeOld
= FlightMode
;
}
// ---------------------------------------------------------------------------------
// This function defines a good GPS signal condition
uint8_t GPS_IsSignalOK
(void)
{
static uint8_t GPSFix
= 0;
if( (GPSInfo.
status != INVALID
) && (GPSInfo.
satfix == SATFIX_3D
) && (GPSInfo.
flags & FLAG_GPSFIXOK
) && ((GPSInfo.
satnum >= ParamSet.
NaviGpsMinSat) || GPSFix
))
{
GPSFix
= 1;
return(1);
}
else return (0);
}
// ---------------------------------------------------------------------------------
// rescale xy-vector length to limit
uint8_t GPS_LimitXY
(int32_t *x
, int32_t *y
, int32_t limit
)
{
uint8_t retval
= 0;
int32_t len
;
len
= (int32_t)c_sqrt
(*x
* *x
+ *y
* *y
);
if (len
> limit
)
{
// normalize control vector components to the limit
*x
= (*x
* limit
) / len
;
*y
= (*y
* limit
) / len
;
retval
= 1;
}
return(retval
);
}
// checks nick and roll sticks for manual control
uint8_t GPS_IsManualControlled
(void)
{
if ( (abs(PPM_in
[ParamSet.
ChannelAssignment[CH_NICK
]]) < ParamSet.
NaviStickThreshold) && (abs(PPM_in
[ParamSet.
ChannelAssignment[CH_ROLL
]]) < ParamSet.
NaviStickThreshold)) return 0;
else return 1;
}
// set given position to current gps position
uint8_t GPS_SetCurrPosition
(GPS_Pos_t
* pGPSPos
)
{
uint8_t retval
= 0;
if(pGPSPos
== NULL
) return(retval
); // bad pointer
if(GPS_IsSignalOK
())
{ // is GPS signal condition is fine
pGPSPos
->Longitude
= GPSInfo.
longitude;
pGPSPos
->Latitude
= GPSInfo.
latitude;
pGPSPos
->Altitude
= GPSInfo.
altitude;
pGPSPos
->Status
= NEWDATA
;
retval
= 1;
}
else
{ // bad GPS signal condition
pGPSPos
->Status
= INVALID
;
retval
= 0;
}
return(retval
);
}
// clear position
uint8_t GPS_ClearPosition
(GPS_Pos_t
* pGPSPos
)
{
uint8_t retval
= 0;
if(pGPSPos
== NULL
) return(retval
); // bad pointer
else
{
pGPSPos
->Longitude
= 0;
pGPSPos
->Latitude
= 0;
pGPSPos
->Altitude
= 0;
pGPSPos
->Status
= INVALID
;
retval
= 1;
}
return (retval
);
}
// disable GPS control sticks
void GPS_Neutral
(void)
{
GPSStickNick
= 0;
GPSStickRoll
= 0;
}
// calculates the GPS control stick values from the deviation to target position
// if the pointer to the target positin is NULL or is the target position invalid
// then the P part of the controller is deactivated.
void GPS_PIDController
(GPS_Pos_t
*pTargetPos
)
{
static int32_t PID_Nick
, PID_Roll
;
int32_t coscompass
, sincompass
;
int32_t GPSPosDev_North
, GPSPosDev_East
; // Position deviation in cm
int32_t P_North
= 0, D_North
= 0, P_East
= 0, D_East
= 0, I_North
= 0, I_East
= 0;
int32_t PID_North
= 0, PID_East
= 0;
static int32_t cos_target_latitude
= 1;
static int32_t GPSPosDevIntegral_North
= 0, GPSPosDevIntegral_East
= 0;
static GPS_Pos_t
*pLastTargetPos
= 0;
// if GPS data and Compass are ok
if( GPS_IsSignalOK
() && (CompassHeading
>= 0) )
{
if(pTargetPos
!= NULL
) // if there is a target position
{
if(pTargetPos
->Status
!= INVALID
) // and the position data are valid
{
// if the target data are updated or the target pointer has changed
if ((pTargetPos
->Status
!= PROCESSED
) || (pTargetPos
!= pLastTargetPos
) )
{
// reset error integral
GPSPosDevIntegral_North
= 0;
GPSPosDevIntegral_East
= 0;
// recalculate latitude projection
cos_target_latitude
= (int32_t)c_cos_8192
((int16_t)(pTargetPos
->Latitude
/10000000L));
// remember last target pointer
pLastTargetPos
= pTargetPos
;
// mark data as processed
pTargetPos
->Status
= PROCESSED
;
}
// calculate position deviation from latitude and longitude differences
GPSPosDev_North
= (GPSInfo.
latitude - pTargetPos
->Latitude
); // to calculate real cm we would need *111/100 additionally
GPSPosDev_East
= (GPSInfo.
longitude - pTargetPos
->Longitude
); // to calculate real cm we would need *111/100 additionally
// calculate latitude projection
GPSPosDev_East
*= cos_target_latitude
;
GPSPosDev_East
/= 8192;
}
else // no valid target position available
{
// reset error
GPSPosDev_North
= 0;
GPSPosDev_East
= 0;
// reset error integral
GPSPosDevIntegral_North
= 0;
GPSPosDevIntegral_East
= 0;
}
}
else // no target position available
{
// reset error
GPSPosDev_North
= 0;
GPSPosDev_East
= 0;
// reset error integral
GPSPosDevIntegral_North
= 0;
GPSPosDevIntegral_East
= 0;
}
//Calculate PID-components of the controller
// D-Part
D_North
= ((int32_t)FCParam.
NaviGpsD * GPSInfo.
velnorth)/512;
D_East
= ((int32_t)FCParam.
NaviGpsD * GPSInfo.
veleast)/512;
// P-Part
P_North
= ((int32_t)FCParam.
NaviGpsP * GPSPosDev_North
)/2048;
P_East
= ((int32_t)FCParam.
NaviGpsP * GPSPosDev_East
)/2048;
// I-Part
I_North
= ((int32_t)FCParam.
NaviGpsI * GPSPosDevIntegral_North
)/8192;
I_East
= ((int32_t)FCParam.
NaviGpsI * GPSPosDevIntegral_East
)/8192;
// combine P & I
PID_North
= P_North
+ I_North
;
PID_East
= P_East
+ I_East
;
if(!GPS_LimitXY
(&PID_North
, &PID_East
, FCParam.
NaviGpsPLimit))
{
GPSPosDevIntegral_North
+= GPSPosDev_North
/16;
GPSPosDevIntegral_East
+= GPSPosDev_East
/16;
GPS_LimitXY
(&GPSPosDevIntegral_North
, &GPSPosDevIntegral_East
, GPS_POSINTEGRAL_LIMIT
);
}
// combine PI- and D-Part
PID_North
+= D_North
;
PID_East
+= D_East
;
// scale combination with gain.
PID_North
= (PID_North
* (int32_t)FCParam.
NaviGpsGain) / 100;
PID_East
= (PID_East
* (int32_t)FCParam.
NaviGpsGain) / 100;
// GPS to nick and roll settings
// A positive nick angle moves head downwards (flying forward).
// A positive roll angle tilts left side downwards (flying left).
// If compass heading is 0 the head of the copter is in north direction.
// A positive nick angle will fly to north and a positive roll angle will fly to west.
// In case of a positive north deviation/velocity the
// copter should fly to south (negative nick).
// In case of a positive east position deviation and a positive east velocity the
// copter should fly to west (positive roll).
// The influence of the GPSStickNick and GPSStickRoll variable is contrarily to the stick values
// in the fc.c. Therefore a positive north deviation/velocity should result in a positive
// GPSStickNick and a positive east deviation/velocity should result in a negative GPSStickRoll.
coscompass
= (int32_t)c_cos_8192
(YawGyroHeading
/ GYRO_DEG_FACTOR
);
sincompass
= (int32_t)c_sin_8192
(YawGyroHeading
/ GYRO_DEG_FACTOR
);
PID_Nick
= (coscompass
* PID_North
+ sincompass
* PID_East
) / 8192;
PID_Roll
= (sincompass
* PID_North
- coscompass
* PID_East
) / 8192;
// limit resulting GPS control vector
GPS_LimitXY
(&PID_Nick
, &PID_Roll
, FCParam.
NaviAngleLimitation);
GPSStickNick
= (int16_t)PID_Nick
;
GPSStickRoll
= (int16_t)PID_Roll
;
//
BeepTime
= abs(GPSStickNick
)+abs(GPSStickRoll
);
}
else // invalid GPS data or bad compass reading
{
GPS_Neutral
(); // do nothing
// reset error integral
GPSPosDevIntegral_North
= 0;
GPSPosDevIntegral_East
= 0;
}
}
void GPS_Main
(void)
{
static uint8_t GPS_P_Delay
= 0;
static uint16_t beep_rythm
= 0;
GPS_UpdateParameter
();
// store home position if start of flight flag is set
if(MKFlags
& MKFLAG_CALIBRATE
)
{
if(GPS_SetCurrPosition
(&HomePosition
)) BeepTime
= 700;
}
switch(GPSInfo.
status)
{
case INVALID
: // invalid gps data
GPS_Neutral
();
if(FlightMode
!= GPS_FLIGHT_MODE_FREE
)
{
BeepTime
= 100; // beep if signal is neccesary
}
break;
case PROCESSED
: // if gps data are already processed do nothing
// downcount timeout
if(GPSTimeout
) GPSTimeout
--;
// if no new data arrived within timeout set current data invalid
// and therefore disable GPS
else
{
GPS_Neutral
();
GPSInfo.
status = INVALID
;
}
break;
case NEWDATA
: // new valid data from gps device
// if the gps data quality is good
beep_rythm
++;
if (GPS_IsSignalOK
())
{
switch(FlightMode
) // check what's to do
{
case GPS_FLIGHT_MODE_FREE
:
// update hold position to current gps position
GPS_SetCurrPosition
(&HoldPosition
); // can get invalid if gps signal is bad
// disable gps control
GPS_Neutral
();
break;
case GPS_FLIGHT_MODE_AID
:
if(HoldPosition.
Status != INVALID
)
{
if( GPS_IsManualControlled
() ) // MK controlled by user
{
// update hold point to current gps position
GPS_SetCurrPosition
(&HoldPosition
);
// disable gps control
GPS_Neutral
();
GPS_P_Delay
= 0;
}
else // GPS control active
{
if(GPS_P_Delay
< 7)
{ // delayed activation of P-Part for 8 cycles (8*0.25s = 2s)
GPS_P_Delay
++;
GPS_SetCurrPosition
(&HoldPosition
); // update hold point to current gps position
GPS_PIDController
(NULL
); // activates only the D-Part
}
else GPS_PIDController
(&HoldPosition
);// activates the P&D-Part
}
}
else // invalid Hold Position
{ // try to catch a valid hold position from gps data input
GPS_SetCurrPosition
(&HoldPosition
);
GPS_Neutral
();
}
break;
case GPS_FLIGHT_MODE_HOME
:
if(HomePosition.
Status != INVALID
)
{
// update hold point to current gps position
// to avoid a flight back if home comming is deactivated
GPS_SetCurrPosition
(&HoldPosition
);
if( GPS_IsManualControlled
() ) // MK controlled by user
{
GPS_Neutral
();
}
else // GPS control active
{
GPS_PIDController
(&HomePosition
);
}
}
else // bad home position
{
BeepTime
= 50; // signal invalid home position
// try to hold at least the position as a fallback option
if (HoldPosition.
Status != INVALID
)
{
if( GPS_IsManualControlled
() ) // MK controlled by user
{
GPS_Neutral
();
}
else // GPS control active
{
GPS_PIDController
(&HoldPosition
);
}
}
else
{ // try to catch a valid hold position
GPS_SetCurrPosition
(&HoldPosition
);
GPS_Neutral
();
}
}
break; // eof TSK_HOME
default: // unhandled task
GPS_Neutral
();
break; // eof default
} // eof switch GPS_Task
} // eof gps data quality is good
else // gps data quality is bad
{ // disable gps control
GPS_Neutral
();
if(FlightMode
!= GPS_FLIGHT_MODE_FREE
)
{
// beep if signal is not sufficient
if(!(GPSInfo.
flags & FLAG_GPSFIXOK
) && !(beep_rythm
% 5)) BeepTime
= 100;
else if (GPSInfo.
satnum < ParamSet.
NaviGpsMinSat && !(beep_rythm
% 5)) BeepTime
= 10;
}
}
// set current data as processed to avoid further calculations on the same gps data
GPSInfo.
status = PROCESSED
;
break;
} // eof GPSInfo.status
}