WebSVN - FlightCtrl - Rev 1471 - /branches/Nick666/V0.74d Code Redesign killagreg/eeprom.c

// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Copyright (c) 04.2007 Holger Buss
// + Nur für den privaten Gebrauch
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist.
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt
// + bzgl. der Nutzungsbedingungen aufzunehmen.
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen,
// + Verkauf von Luftbildaufnahmen, usw.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"
// + eindeutig als Ursprung verlinkt werden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion
// + Benutzung auf eigene Gefahr
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zulässig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Redistributions of source code (with or without modifications) must retain the above copyright notice,
// + this list of conditions and the following disclaimer.
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived
// + from this software without specific prior written permission.
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet
// + for non-commercial use (directly or indirectly)
// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted
// + with our written permission
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
// + clearly linked as origin
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// + POSSIBILITY OF SUCH DAMAGE.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Contant Values
// + 0-250 -> normale Values
// + 251 -> Poti1
// + 252 -> Poti2
// + 253 -> Poti3
// + 254 -> Poti4
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

#ifndef EEMEM
#define EEMEM __attribute__ ((section (".eeprom")))
#endif

#include <avr/eeprom.h>
#include <string.h>
#include "eeprom.h"
#include "printf_P.h"
#include "led.h"
#include "main.h"
#include "fc.h"

// byte array in eeprom
uint8_t EEPromArray[E2END+1] EEMEM;

paramset_t ParamSet;
MixerTable_t Mixer;

/***************************************************/
/* Default Values for parameter set 1 */
/***************************************************/
void ParamSet_DefaultSet1(void) // sport
{
if(BoardRelease >= 20)
{
ParamSet.GyroD = 5;
ParamSet.DriftComp = 0;
ParamSet.GyroAccFactor = 27;
ParamSet.AngleTurnOverNick = 78;
ParamSet.AngleTurnOverRoll = 78;
}
else
{
ParamSet.GyroD = 3;
ParamSet.DriftComp = 32;
ParamSet.GyroAccFactor = 30;
ParamSet.AngleTurnOverNick = 85;
ParamSet.AngleTurnOverRoll = 85;
}
ParamSet.ChannelAssignment[CH_NICK] = 1;
ParamSet.ChannelAssignment[CH_ROLL] = 2;
ParamSet.ChannelAssignment[CH_GAS] = 3;
ParamSet.ChannelAssignment[CH_YAW] = 4;
ParamSet.ChannelAssignment[CH_POTI1] = 5;
ParamSet.ChannelAssignment[CH_POTI2] = 6;
ParamSet.ChannelAssignment[CH_POTI3] = 7;
ParamSet.ChannelAssignment[CH_POTI4] = 8;
ParamSet.GlobalConfig = CFG_AXIS_COUPLING_ACTIVE | CFG_COMPASS_ACTIVE | CFG_GPS_ACTIVE;//CFG_HEIGHT_CONTROL | CFG_HEIGHT_SWITCH | CFG_COMPASS_FIX;
ParamSet.HeightMinGas = 30;
ParamSet.MaxHeight = 251;
ParamSet.HeightP = 10;
ParamSet.HeightD = 30;
ParamSet.Height_ACC_Effect = 30;
ParamSet.Height_Gain = 4;
ParamSet.StickP = 15;
ParamSet.StickD = 30;
ParamSet.StickYawP = 12;
ParamSet.GasMin = 8;
ParamSet.GasMax = 230;
ParamSet.CompassYawEffect = 128;
ParamSet.GyroP = 80;
ParamSet.GyroI = 150;
ParamSet.LowVoltageWarning = 94;
ParamSet.EmergencyGas = 35;
ParamSet.EmergencyGasDuration = 30;
ParamSet.UfoArrangement = 0;
ParamSet.IFactor = 32;
ParamSet.UserParam1 = 0;
ParamSet.UserParam2 = 0;
ParamSet.UserParam3 = 0;
ParamSet.UserParam4 = 0;
ParamSet.UserParam5 = 0;
ParamSet.UserParam6 = 0;
ParamSet.UserParam7 = 0;
ParamSet.UserParam8 = 0;
ParamSet.ServoNickControl = 100;
ParamSet.ServoNickComp = 40;
ParamSet.ServoNickCompInvert = 0;
ParamSet.ServoNickMin = 50;
ParamSet.ServoNickMax = 150;
ParamSet.ServoRefresh = 5;
ParamSet.LoopGasLimit = 50;
ParamSet.LoopThreshold = 90;
ParamSet.LoopHysteresis = 50;
ParamSet.BitConfig = 0;
ParamSet.AxisCoupling1 = 90;
ParamSet.AxisCoupling2 = 67;
ParamSet.AxisCouplingYawCorrection = 0;
ParamSet.GyroAccTrim = 16;
ParamSet.DynamicStability = 100;
ParamSet.J16Bitmask = 95;
ParamSet.J17Bitmask = 243;
ParamSet.J16Timing = 15;
ParamSet.J17Timing = 15;
ParamSet.NaviGpsModeControl = 253;
ParamSet.NaviGpsGain = 100;
ParamSet.NaviGpsP = 90;
ParamSet.NaviGpsI = 90;
ParamSet.NaviGpsD = 90;
ParamSet.NaviGpsPLimit = 25;
ParamSet.NaviGpsILimit = 75;
ParamSet.NaviGpsDLimit = 75;
ParamSet.NaviGpsACC = 0;
ParamSet.NaviGpsMinSat = 6;
ParamSet.NaviStickThreshold = 8;
ParamSet.NaviWindCorrection = 90;
ParamSet.NaviSpeedCompensation = 30;
ParamSet.NaviOperatingRadius = 100;
ParamSet.NaviAngleLimitation = 45;
ParamSet.NaviPHLoginTime = 4;
memcpy(ParamSet.Name, "Sport\0",6);
}

/***************************************************/
/* Default Values for parameter set 2 */
/***************************************************/
void ParamSet_DefaultSet2(void) // normal
{
if(BoardRelease >= 20)
{
ParamSet.GyroD = 5;
ParamSet.DriftComp = 0;
ParamSet.GyroAccFactor = 27;
ParamSet.AngleTurnOverNick = 78;
ParamSet.AngleTurnOverRoll = 78;
}
else
{
ParamSet.GyroD = 3;
ParamSet.DriftComp = 32;
ParamSet.GyroAccFactor = 30;
ParamSet.AngleTurnOverNick = 85;
ParamSet.AngleTurnOverRoll = 85;
}
ParamSet.ChannelAssignment[CH_NICK] = 1;
ParamSet.ChannelAssignment[CH_ROLL] = 2;
ParamSet.ChannelAssignment[CH_GAS] = 3;
ParamSet.ChannelAssignment[CH_YAW] = 4;
ParamSet.ChannelAssignment[CH_POTI1] = 5;
ParamSet.ChannelAssignment[CH_POTI2] = 6;
ParamSet.ChannelAssignment[CH_POTI3] = 7;
ParamSet.ChannelAssignment[CH_POTI4] = 8;
ParamSet.GlobalConfig = CFG_AXIS_COUPLING_ACTIVE | CFG_COMPASS_ACTIVE | CFG_GPS_ACTIVE;//CFG_HEIGHT_CONTROL | CFG_HEIGHT_SWITCH | CFG_COMPASS_FIX;
ParamSet.HeightMinGas = 30;
ParamSet.MaxHeight = 251;
ParamSet.HeightP = 10;
ParamSet.HeightD = 30;
ParamSet.Height_ACC_Effect = 30;
ParamSet.Height_Gain = 3;
ParamSet.StickP = 12;
ParamSet.StickD = 16;
ParamSet.StickYawP = 6;
ParamSet.GasMin = 8;
ParamSet.GasMax = 230;
ParamSet.CompassYawEffect = 128;
ParamSet.GyroP = 80;
ParamSet.GyroI = 120;
ParamSet.LowVoltageWarning = 94;
ParamSet.EmergencyGas = 35;
ParamSet.EmergencyGasDuration = 30;
ParamSet.UfoArrangement = 0;
ParamSet.IFactor = 32;
ParamSet.UserParam1 = 0;
ParamSet.UserParam2 = 0;
ParamSet.UserParam3 = 0;
ParamSet.UserParam4 = 0;
ParamSet.UserParam5 = 0;
ParamSet.UserParam6 = 0;
ParamSet.UserParam7 = 0;
ParamSet.UserParam8 = 0;
ParamSet.ServoNickControl = 100;
ParamSet.ServoNickComp = 40;
ParamSet.ServoNickCompInvert = 0;
ParamSet.ServoNickMin = 50;
ParamSet.ServoNickMax = 150;
ParamSet.ServoRefresh = 5;
ParamSet.LoopGasLimit = 50;
ParamSet.LoopThreshold = 90;
ParamSet.LoopHysteresis = 50;
ParamSet.BitConfig = 0;
ParamSet.AxisCoupling1 = 90;
ParamSet.AxisCoupling2 = 67;
ParamSet.AxisCouplingYawCorrection = 60;
ParamSet.GyroAccTrim = 32;
ParamSet.DynamicStability = 75;
ParamSet.J16Bitmask = 95;
ParamSet.J17Bitmask = 243;
ParamSet.J16Timing = 20;
ParamSet.J17Timing = 20;
ParamSet.NaviGpsModeControl = 253;
ParamSet.NaviGpsGain = 100;
ParamSet.NaviGpsP = 90;
ParamSet.NaviGpsI = 90;
ParamSet.NaviGpsD = 90;
ParamSet.NaviGpsPLimit = 25;
ParamSet.NaviGpsILimit = 75;
ParamSet.NaviGpsDLimit = 75;
ParamSet.NaviGpsACC = 0;
ParamSet.NaviGpsMinSat = 6;
ParamSet.NaviStickThreshold = 8;
ParamSet.NaviWindCorrection = 90;
ParamSet.NaviSpeedCompensation = 30;
ParamSet.NaviOperatingRadius = 100;
ParamSet.NaviAngleLimitation = 45;
ParamSet.NaviPHLoginTime = 4;
memcpy(ParamSet.Name, "Normal\0", 7);
}

/***************************************************/
/* Default Values for parameter set 3 */
/***************************************************/
void ParamSet_DefaultSet3(void) // beginner
{
if(BoardRelease >= 20)
{
ParamSet.GyroD = 5;
ParamSet.DriftComp = 0;
ParamSet.GyroAccFactor = 27; // Wert : 1-64
ParamSet.AngleTurnOverNick = 78;
ParamSet.AngleTurnOverRoll = 78;
}
else
{
ParamSet.GyroD = 3;
ParamSet.DriftComp = 32;
ParamSet.GyroAccFactor = 30; // Wert : 1-64
ParamSet.AngleTurnOverNick = 85;
ParamSet.AngleTurnOverRoll = 85;
}
ParamSet.ChannelAssignment[CH_NICK] = 1;
ParamSet.ChannelAssignment[CH_ROLL] = 2;
ParamSet.ChannelAssignment[CH_GAS] = 3;
ParamSet.ChannelAssignment[CH_YAW] = 4;
ParamSet.ChannelAssignment[CH_POTI1] = 5;
ParamSet.ChannelAssignment[CH_POTI2] = 6;
ParamSet.ChannelAssignment[CH_POTI3] = 7;
ParamSet.ChannelAssignment[CH_POTI4] = 8;
ParamSet.GlobalConfig = CFG_ROTARY_RATE_LIMITER | CFG_AXIS_COUPLING_ACTIVE | CFG_COMPASS_ACTIVE | CFG_GPS_ACTIVE;//CFG_HEIGHT_CONTROL | CFG_HEIGHT_SWITCH | CFG_COMPASS_FIX;
ParamSet.HeightMinGas = 30;
ParamSet.MaxHeight = 251;
ParamSet.HeightP = 10;
ParamSet.HeightD = 30;
ParamSet.Height_ACC_Effect = 30;
ParamSet.Height_Gain = 3;
ParamSet.StickP = 8;
ParamSet.StickD = 16;
ParamSet.StickYawP = 6;
ParamSet.GasMin = 8;
ParamSet.GasMax = 230;
ParamSet.CompassYawEffect = 128;
ParamSet.GyroP = 100;
ParamSet.GyroI = 120;
ParamSet.LowVoltageWarning = 94;
ParamSet.EmergencyGas = 35;
ParamSet.EmergencyGasDuration = 20;
ParamSet.UfoArrangement = 0;
ParamSet.IFactor = 16;
ParamSet.UserParam1 = 0;
ParamSet.UserParam2 = 0;
ParamSet.UserParam3 = 0;
ParamSet.UserParam4 = 0;
ParamSet.UserParam5 = 0;
ParamSet.UserParam6 = 0;
ParamSet.UserParam7 = 0;
ParamSet.UserParam8 = 0;
ParamSet.ServoNickControl = 100;
ParamSet.ServoNickComp = 40;
ParamSet.ServoNickCompInvert = 0;
ParamSet.ServoNickMin = 50;
ParamSet.ServoNickMax = 150;
ParamSet.ServoRefresh = 5;
ParamSet.LoopGasLimit = 50;
ParamSet.LoopThreshold = 90;
ParamSet.LoopHysteresis = 50;
ParamSet.BitConfig = 0;
ParamSet.AxisCoupling1 = 90;
ParamSet.AxisCoupling2 = 67;
ParamSet.AxisCouplingYawCorrection = 70;
ParamSet.GyroAccTrim = 32;
ParamSet.DynamicStability = 50;
ParamSet.J16Bitmask = 95;
ParamSet.J17Bitmask = 243;
ParamSet.J16Timing = 30;
ParamSet.J17Timing = 30;
ParamSet.NaviGpsModeControl = 253;
ParamSet.NaviGpsGain = 100;
ParamSet.NaviGpsP = 90;
ParamSet.NaviGpsI = 90;
ParamSet.NaviGpsD = 90;
ParamSet.NaviGpsPLimit = 25;
ParamSet.NaviGpsILimit = 75;
ParamSet.NaviGpsDLimit = 75;
ParamSet.NaviGpsACC = 0;
ParamSet.NaviGpsMinSat = 6;
ParamSet.NaviStickThreshold = 8;
ParamSet.NaviWindCorrection = 90;
ParamSet.NaviSpeedCompensation = 30;
ParamSet.NaviOperatingRadius = 100;
ParamSet.NaviAngleLimitation = 45;
ParamSet.NaviPHLoginTime = 4;
memcpy(ParamSet.Name, "Beginner\0", 9);
}

/***************************************************/
/* Read Parameter from EEPROM as byte */
/***************************************************/
uint8_t GetParamByte(uint16_t param_id)
{
return eeprom_read_byte(&EEPromArray[EEPROM_ADR_PARAM_BEGIN + param_id]);
}

/***************************************************/
/* Write Parameter to EEPROM as byte */
/***************************************************/
void SetParamByte(uint16_t param_id, uint8_t value)
{
eeprom_write_byte(&EEPromArray[EEPROM_ADR_PARAM_BEGIN + param_id], value);
}

/***************************************************/
/* Read Parameter from EEPROM as word */
/***************************************************/
uint16_t GetParamWord(uint16_t param_id)
{
return eeprom_read_word((uint16_t *) &EEPromArray[EEPROM_ADR_PARAM_BEGIN + param_id]);
}

/***************************************************/
/* Write Parameter to EEPROM as word */
/***************************************************/
void SetParamWord(uint16_t param_id, uint16_t value)
{
eeprom_write_word((uint16_t *) &EEPromArray[EEPROM_ADR_PARAM_BEGIN + param_id], value);
}

/***************************************************/
/* Read Parameter Set from EEPROM */
/***************************************************/
// number [1..5]
void ParamSet_ReadFromEEProm(uint8_t setnumber)
{
if((1 > setnumber) || (setnumber > 5)) setnumber = 3;
eeprom_read_block((uint8_t *) &ParamSet.ChannelAssignment[0], &EEPromArray[EEPROM_ADR_PARAMSET_BEGIN + PARAMSET_STRUCT_LEN * (setnumber - 1)], PARAMSET_STRUCT_LEN);
LED_Init();
}

/***************************************************/
/* Write Parameter Set to EEPROM */
/***************************************************/
// number [1..5]
void ParamSet_WriteToEEProm(uint8_t setnumber)
{
if(setnumber > 5) setnumber = 5;
if(setnumber < 1) return;
eeprom_write_block((uint8_t *) &ParamSet.ChannelAssignment[0], &EEPromArray[EEPROM_ADR_PARAMSET_BEGIN + PARAMSET_STRUCT_LEN * (setnumber - 1)], PARAMSET_STRUCT_LEN);
eeprom_write_word((uint16_t *) &EEPromArray[EEPROM_ADR_PARAMSET_LENGTH], PARAMSET_STRUCT_LEN);
eeprom_write_block( &ParamSet.ChannelAssignment[0], &EEPromArray[EEPROM_ADR_CHANNELS], 8); // backup the first 8 bytes that is the rc channel mapping
// set this parameter set to active set
SetActiveParamSet(setnumber);
LED_Init();
}

/***************************************************/
/* Read MixerTable from EEPROM */
/***************************************************/
uint8_t MixerTable_ReadFromEEProm(void)
{
if(eeprom_read_byte(&EEPromArray[EEPROM_ADR_MIXER_TABLE]) == EEMIXER_REVISION)
{
eeprom_read_block((uint8_t *) &Mixer, &EEPromArray[EEPROM_ADR_MIXER_TABLE], sizeof(Mixer));
return 1;
}
else return 0;
}

/***************************************************/
/* Write Mixer Table to EEPROM */
/***************************************************/
uint8_t MixerTable_WriteToEEProm(void)
{
if(Mixer.Revision == EEMIXER_REVISION)
{
eeprom_write_block((uint8_t *) &Mixer, &EEPromArray[EEPROM_ADR_MIXER_TABLE], sizeof(Mixer));
return 1;
}
else return 0;
}

/***************************************************/
/* Default Values for Mixer Table */
/***************************************************/
void MixerTable_Default(void) // Quadro
{
uint8_t i;

Mixer.Revision = EEMIXER_REVISION;
// clear mixer table
for(i = 0; i < 16; i++)
{
Mixer.Motor[i][MIX_GAS] = 0;
Mixer.Motor[i][MIX_NICK] = 0;
Mixer.Motor[i][MIX_ROLL] = 0;
Mixer.Motor[i][MIX_YAW] = 0;
}
// default = Quadro
Mixer.Motor[0][MIX_GAS] = 64; Mixer.Motor[0][MIX_NICK] = +64; Mixer.Motor[0][MIX_ROLL] = 0; Mixer.Motor[0][MIX_YAW] = +64;
Mixer.Motor[1][MIX_GAS] = 64; Mixer.Motor[1][MIX_NICK] = -64; Mixer.Motor[1][MIX_ROLL] = 0; Mixer.Motor[1][MIX_YAW] = +64;
Mixer.Motor[2][MIX_GAS] = 64; Mixer.Motor[2][MIX_NICK] = 0; Mixer.Motor[2][MIX_ROLL] = -64; Mixer.Motor[2][MIX_YAW] = -64;
Mixer.Motor[3][MIX_GAS] = 64; Mixer.Motor[3][MIX_NICK] = 0; Mixer.Motor[3][MIX_ROLL] = +64; Mixer.Motor[3][MIX_YAW] = -64;
memcpy(Mixer.Name, "Quadro\0", 7);
}

/***************************************************/
/* Get active parameter set */
/***************************************************/
uint8_t GetActiveParamSet(void)
{
uint8_t setnumber;
setnumber = eeprom_read_byte(&EEPromArray[PID_ACTIVE_SET]);
if(setnumber > 5)
{
setnumber = 3;
eeprom_write_byte(&EEPromArray[PID_ACTIVE_SET], setnumber);
}
return(setnumber);
}

/***************************************************/
/* Set active parameter set */
/***************************************************/
void SetActiveParamSet(uint8_t setnumber)
{
if(setnumber > 5) setnumber = 5;
if(setnumber < 1) setnumber = 1;
eeprom_write_byte(&EEPromArray[PID_ACTIVE_SET], setnumber);
}

/***************************************************/
/* Initialize EEPROM Parameter Sets */
/***************************************************/
void ParamSet_Init(void)
{
uint8_t Channel_Backup = 0, i;
// parameter version check
if(eeprom_read_byte(&EEPromArray[PID_PARAM_REVISION]) != EEPARAM_REVISION)
{
// if version check faild
printf("\n\rInit Parameter in EEPROM");
eeprom_write_byte(&EEPromArray[EEPROM_ADR_MIXER_TABLE], 0xFF); // reset also mixer table
// check if channel mapping backup is valid
if( (eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+0]) < 12)
&& (eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+1]) < 12)
&& (eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+2]) < 12)
&& (eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+3]) < 12)
)
{
Channel_Backup = 1;
}
// fill all 5 parameter settings
for (i = 1;i < 6; i++)
{
switch(i)
{
case 1:
ParamSet_DefaultSet1(); // Fill ParamSet Structure to default parameter set 1 (Sport)
break;
case 2:
ParamSet_DefaultSet2(); // Kamera
break;
case 3:
ParamSet_DefaultSet3(); // Beginner
break;
default:
ParamSet_DefaultSet2(); // Kamera
break;
}
if(Channel_Backup) // if we have a rc channel mapping backup in eeprom
{
// restore it
ParamSet.ChannelAssignment[0] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+0]);
ParamSet.ChannelAssignment[1] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+1]);
ParamSet.ChannelAssignment[2] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+2]);
ParamSet.ChannelAssignment[3] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+3]);
ParamSet.ChannelAssignment[4] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+4]);
ParamSet.ChannelAssignment[5] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+5]);
ParamSet.ChannelAssignment[6] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+6]);
ParamSet.ChannelAssignment[7] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+7]);
}
ParamSet_WriteToEEProm(i);
}
// default-Setting is parameter set 3
SetActiveParamSet(3);
// update version info
SetParamByte(PID_PARAM_REVISION, EEPARAM_REVISION);
}
// read active parameter set to ParamSet stucture
ParamSet_ReadFromEEProm(GetActiveParamSet());
printf("\n\rUsing Parameter Set %d", GetActiveParamSet());

// load mixer table
if(!MixerTable_ReadFromEEProm() )
{
printf("\n\rGenerating default Mixer Table");
MixerTable_Default(); // Quadro
MixerTable_WriteToEEProm();
}
// determine motornumber
RequiredMotors = 0;
for(i = 0; i < 16; i++)
{
if(Mixer.Motor[i][MIX_GAS] > 0) RequiredMotors++;
}

printf("\n\rMixer-Config: '%s' (%u Motors)",Mixer.Name, RequiredMotors);
printf("\n\r==============================");
}

Subversion Repositories FlightCtrl

(root)/branches/Nick666/V0.74d Code Redesign killagreg/eeprom.c @ 2046 - Rev 1471