Subversion Repositories FlightCtrl

#include "main.h"

volatile unsigned int CountMilliseconds = 0;
volatile unsigned char UpdateMotor = 0;
volatile unsigned int beeptime = 0;
int ServoValue = 0;

enum {
  STOP             = 0,
  CK               = 1,
  CK8              = 2,
  CK64             = 3,
  CK256            = 4,
  CK1024           = 5,
  T0_FALLING_EDGE  = 6,
  T0_RISING_EDGE   = 7
};


SIGNAL (SIG_OVERFLOW0)    // 9,8kHz
{
    static unsigned char cnt_1ms = 1,cnt = 0;
//    TCNT0 -= 250;//TIMER_RELOAD_VALUE;

   if(!cnt--)
    {
     cnt = 10;
     cnt_1ms++;
     cnt_1ms %= 2;
     if(!cnt_1ms) UpdateMotor = 1;
     CountMilliseconds++;
     if(Timeout) Timeout--;
     }  

     if(beeptime > 1)
        {
        beeptime--;
        PORTD |= (1<<PD2);
        }
     else  
        PORTD &= ~(1<<PD2);

        if(EE_Parameter.GlobalConfig & CFG_KOMPASS_AKTIV) timer0_MM3();         // Kompass auslesen
}


void Timer_Init(void)
{
    TCCR0B = CK8;
    TCCR0A = (1<<COM0A1)|(1<<COM0B1)|3;//fast PWM
    OCR0A =  0;
    OCR0B = 120;
    //TCNT0 = -TIMER_RELOAD_VALUE;  // reload
    //OCR1  = 0x00;

    TCCR2A=(1<<COM2A1)|(1<<COM2A0)|3;
    TCCR2B=(0<<CS20)|(1<<CS21)|(1<<CS22);
   
//    TIMSK2 |= _BV(TOIE2);
TIMSK2 |= _BV(OCIE2A);

    TIMSK0 |= _BV(TOIE0);
    OCR2A = 10;
    TCNT2 = 0;    
}

// -----------------------------------------------------------------------

unsigned int SetDelay (unsigned int t)
{
//  TIMSK0 &= ~_BV(TOIE0);
  return(CountMilliseconds + t + 1);                                            
//  TIMSK0 |= _BV(TOIE0);
}

// -----------------------------------------------------------------------
char CheckDelay(unsigned int t)
{
//  TIMSK0 &= ~_BV(TOIE0);
  return(((t - CountMilliseconds) & 0x8000) >> 9);
//  TIMSK0 |= _BV(TOIE0);
}

// -----------------------------------------------------------------------
void Delay_ms(unsigned int w)
{
 unsigned int akt;
 akt = SetDelay(w);
 while (!CheckDelay(akt));
}

// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++               
//  Servo ansteuern
// +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++               
SIGNAL(SIG_OUTPUT_COMPARE2A)
{
  static unsigned char timer = 10;
 
  if(!timer--)  
    {
     TCCR2A=(1<<COM2A1)|(0<<COM2A0)|3;  
     ServoValue =  Parameter_ServoNickControl;
     if(EE_Parameter.ServoNickCompInvert & 0x01) ServoValue += ((long) EE_Parameter.ServoNickComp * (IntegralNick / 128)) / 512;
     else ServoValue -= ((long) EE_Parameter.ServoNickComp * (IntegralNick / 128)) / 512;
     
     if(ServoValue < EE_Parameter.ServoNickMin) ServoValue = EE_Parameter.ServoNickMin;
     else if(ServoValue > EE_Parameter.ServoNickMax) ServoValue = EE_Parameter.ServoNickMax;

     //DebugOut.Analog[10] = ServoValue;    
     OCR2A = ServoValue;// + 75;
     timer = EE_Parameter.ServoNickRefresh;
    }
    else
    {
     TCCR2A =3;
     PORTD&=~0x80;
    }
}