Subversion Repositories MK3Mag

Rev

Rev 7 | Rev 18 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

#ifndef _UART_H
 #define _UART_H

extern unsigned volatile char SIO_Sollwert;
extern unsigned volatile char UebertragungAbgeschlossen;
extern unsigned volatile char PC_DebugTimeout;
extern unsigned char MeineSlaveAdresse;
extern int Debug_Timer;
extern void UART_Init (void);
extern int uart_putchar (char c);
extern void boot_program_page (uint32_t page, uint8_t *buf);
extern void SendUart(void);

void DatenUebertragung(void);

struct str_DebugOut
{
 unsigned char Digital[2];
 unsigned int Analog[32];    // Debugwerte
};

struct str_ExternData
{
 signed int  Winkel[2]; // in 0,1 degree
 unsigned char UserParameter[2];
 unsigned char CalState;        
 unsigned char Orientation;
};
extern struct str_ExternData  ExternData;
#define NICK 0
#define ROLL 1


struct str_ExternControl
{
 unsigned char Digital[2];
 unsigned char RemoteTasten;
 signed char   Nick;
 signed char   Roll;
 signed char   Gier;
 unsigned char Gas;
 signed char   Hight;
 unsigned char Par1;
 unsigned char Par2;
 unsigned char Par3;
};
extern struct str_ExternControl  ExternControl;

struct str_VersionInfo
{
  unsigned char Hauptversion;
  unsigned char Nebenversion;
  unsigned char PCKompatibel;
  unsigned char Rserved[7];
};  
extern struct str_VersionInfo VersionInfo;


extern struct str_DebugOut    DebugOut;
extern struct str_DebugOut    DebugOut;
//Die Baud_Rate der Seriellen Schnittstelle
//#define BAUD_RATE 9600                //Baud Rate für die Serielle Schnittstelle     
//#define BAUD_RATE 14400               //Baud Rate für die Serielle Schnittstelle     
//#define BAUD_RATE 28800               //Baud Rate für die Serielle Schnittstelle     

#if X3D_SIO == 1
 #define BAUD_RATE 38400                //Baud Rate für die Serielle Schnittstelle     
#else
 #define BAUD_RATE 57600                //Baud Rate für die Serielle Schnittstelle     
#endif

//Anpassen der seriellen Schnittstellen Register wenn ein ATMega128 benutzt wird
#if defined (__AVR_ATmega128__)
#       define USR UCSR0A
#       define UCR UCSR0B
#       define UDR UDR0
#       define UBRR UBRR0L
#       define EICR EICRB
#endif

#if defined (__AVR_ATmega8__)
#       define USR UCSRA
#       define UCR UCSRB
#       define UBRR UBRRL
#       define EICR EICRB
#   define INT_VEC_RX  SIG_UART_RECV
#   define INT_VEC_TX  SIG_UART_TRANS
#endif

#if defined (__AVR_ATmega168__)
#       define USR  UCSR0A
#       define UCR  UCSR0B
#       define UDR  UDR0
#       define UBRR UBRR0L
#       define EICR EICR0B
#   define TXEN TXEN0
#   define RXEN RXEN0
#   define RXCIE RXCIE0
#   define TXCIE TXCIE0
#   define U2X  U2X0
#   define UCSRB UCSR0B
#   define UDRE UDRE0
#   define INT_VEC_RX  SIG_USART_RECV
#   define INT_VEC_TX  SIG_USART_TRANS
#endif


#if defined (__AVR_ATmega32__)
#       define USR UCSRA
#       define UCR UCSRB
#       define UBRR UBRRL
#       define EICR EICRB
#   define INT_VEC_RX  SIG_UART_RECV
#   define INT_VEC_TX  SIG_UART_TRANS
#endif

#if defined (__AVR_ATmega644__)
#       define USR  UCSR0A
#       define UCR  UCSR0B
#       define UDR  UDR0
#       define UBRR UBRR0L
#       define EICR EICR0B
#   define TXEN TXEN0
#   define RXEN RXEN0
#   define RXCIE RXCIE0
#   define TXCIE TXCIE0
#   define U2X  U2X0
#   define UCSRB UCSR0B
#   define UDRE UDRE0
#   define INT_VEC_RX  SIG_USART_RECV
#   define INT_VEC_TX  SIG_USART_TRANS
#endif


#endif //_UART_H