Blame |
Last modification |
View Log
| RSS feed
#include <stdlib.h>
#include "spectrum.h"
#include "rc.h"
uint8_t SpektrumTimer
;
/*
Code derived from:
Copyright (c) Rainer Walther
RC-routines from original MK rc.c (c) H&I
Useful infos from Walter: http://www.rcgroups.com/forums/showthread.php?t=714299&page=2
only for non-profit use
Connection of Spectrum Sattelite to SV1 of FC:
Orange: 3V from the FC (never connect 5V!)
Black: GND
Gray: RXD1 (Pin 3)
If a receiver is connected via PPM input at the same time, the PPM input will be disabled
if a stable signal can be captured by the uart.
Data are send at every 20 ms @ 115200 Baud 8-N-1
DX7/DX6i: One data-frame @ 115200 Baud 8-N-1 every 22ms.
DX7se: One data-frame @ 115200 Baud 8-N-1 every 11ms.
Frame consist of:
byte1: unknown
byte2: unknown
byte3: and byte4: channel data
byte5: and byte6: channel data
byte7: and byte8: channel data
byte9: and byte10: channel data
byte11: and byte12: channel data
byte13: and byte14: channel data
byte15: and byte16: channel data
DS9 (9 Channel): One data-frame @ 115200 Baud 8-N-1 every 11ms,
alternating frame 1/2 for CH1-7 / CH8-9
1st Frame consist of:
byte1: unknown
byte2: unknown
byte3: and byte4: channel data
byte5: and byte6: channel data
byte7: and byte8: channel data
byte9: and byte10: channel data
byte11: and byte12: channel data
byte13: and byte14: channel data
byte15: and byte16: channel data
2nd Frame consist of:
byte1: unknown
byte2: unknown
byte3: and byte4: channel data
byte5: and byte6: channel data
byte7: and byte8: 0xffff
byte9: and byte10: 0xffff
byte11: and byte12: 0xffff
byte13: and byte14: 0xffff
byte15: and byte16: 0xffff
Each channel data (16 bit = 2byte, first msb, second lsb) is arranged as:
Bits: F 0 C3 C2 C1 C0 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
0 means a '0' bit
F: 0 = indicate first frame, 1 = indicates beginning of 2nd frame for CH8-9 (DS9 only)
C3 to C0 is the channel number. 0 to 9 (4 bit, as assigned in the transmitter)
D9 to D0 is the channel data (10 bit) 0xaa..0x200..0x356 for 100% transmitter-travel
*/
#define MIN_FRAMEGAP 68 // 7ms
#define MAX_BYTEGAP 3 // 375us
void spectrum_parser
(uint8_t c
)
{
static uint8_t Sync
= 0, FrameCnt
= 0, ByteHigh
= 0, ReSync
= 1, Frame2
= 0;
uint16_t Channel
, index
;
int16_t signal
; //tmp;
int16_t bCheckDelay
;
if (ReSync
== 1)
{
// wait for beginning of new frame
ReSync
= 0;
SpektrumTimer
= MIN_FRAMEGAP
;
FrameCnt
= 0;
Sync
= 0;
ByteHigh
= 0;
}
else
{
if(!SpektrumTimer
) bCheckDelay
= 1;
else bCheckDelay
= 0;
if ( Sync
== 0 )
{
if(bCheckDelay
)
{
// nach einer Pause von mind. 7ms erstes Sync-Character gefunden
// Zeichen ignorieren, da Bedeutung unbekannt
SpektrumTimer
= MAX_BYTEGAP
;
FrameCnt
++;
Sync
= 1;
}
else
{
// Zeichen kam vor Ablauf der 7ms Sync-Pause
// warten auf erstes Sync-Zeichen
SpektrumTimer
= MIN_FRAMEGAP
;
FrameCnt
= 0;
Sync
= 0;
ByteHigh
= 0;
}
}
else if((Sync
== 1) && !bCheckDelay
)
{
// zweites Sync-Character ignorieren, Bedeutung unbekannt
SpektrumTimer
= MAX_BYTEGAP
;
Sync
= 2;
FrameCnt
++;
}
else if((Sync
== 2) && !bCheckDelay
)
{
// Datenbyte high
SpektrumTimer
= MAX_BYTEGAP
;
ByteHigh
= c
;
if (FrameCnt
== 2)
{
// is 1st Byte of Channel-data
// Frame 1 with Channel 1-7 comming next
Frame2
= 0;
if(ByteHigh
& 0x80)
{
// DS9: Frame 2 with Channel 8-9 comming next
Frame2
= 1;
}
}
Sync
= 3;
FrameCnt
++;
}
else if((Sync
== 3) && !bCheckDelay
)
{
// Datenbyte low
// High-Byte for next channel comes next
SpektrumTimer
= MAX_BYTEGAP
;
Sync
= 2;
FrameCnt
++;
index
= (ByteHigh
>> 2) & 0x0f;
index
++;
Channel
= ((uint16_t)ByteHigh
<< 8) | c
;
signal
= Channel
& 0x3ff;
signal
-= 0x200; // Offset, range 0x000..0x3ff?
signal
= signal
/3; // scaling to fit PPM resolution
if(index
>= 0 && index
< MAX_CHANNELS
)
{
if(RC_Channels
< index
) RC_Channels
= index
;
// Stabiles Signal
if(abs(signal
- PPM_in
[index
]) < 6)
{
if(RC_Quality
< 200)
{
RC_Quality
+= 10;
}
else
{
RC_Quality
= 200;
PPM_INPUT_OFF
; // disable PPM input at ICP
}
}
//tmp = (3 * PPM_in[index] + signal)/4;
//if(tmp > signal+1) tmp--;
//else if(tmp < signal-1) tmp++;
// calculate signal difference on good signal level
if(RC_Quality
>= 180) PPM_diff
[index
] = ((signal
- PPM_in
[index
]) / 3) * 3;
else PPM_diff
[index
] = 0;
PPM_in
[index
] = signal
;
}
else if(index
> 17) ReSync
= 1; // hier stimmt was nicht: neu synchronisieren
}
else
{
// hier stimmt was nicht: neu synchronisieren
SpektrumTimer
= MIN_FRAMEGAP
; // next frame expexted after 7ms
ReSync
= 1;
FrameCnt
= 0;
Frame2
= 0;
}
// 16 Bytes per frame --> frame complete
if(FrameCnt
>= 16)
{
// Frame complete
if(Frame2
== 0)
{
// Null bedeutet: Neue Daten
// nur beim ersten Frame (CH 0-7) setzen
if(!ReSync
) NewPpmData
= 0;
}
SpektrumTimer
= MIN_FRAMEGAP
;
FrameCnt
= 0;
Frame2
= 0;
Sync
= 0;
}
}
}