Rev 2136 |
Blame |
Last modification |
View Log
| RSS feed
/*****************************************************************************
*****************************************************************************/
//############################################################################
//# HISTORY mkparameters_messages.h
//#
//# 16.07.2015 Cebra
//# - add: Texte für neue Parameter in FC 2.11a inkl. der ID's
//# const char param_singleWpControlChannel_de
//# const char param_MenuKeyChannel_de
//#
//# 09.04.2015 Cebra
//# - add: Texte für neue Parameter in FC 2.09j
//# const char param_ServoNickFails_de[],const char param_ServoRollFails_de[], const char param_Servo3Fails_de[],
//# const char param_Servo4Fails_de[], const char param_Servo5Fails_de[]
//#
//# 26.09.2014 Cebra
//# - add: Text Höhe Tilt Compensation (FC207f)
//#
//# 04.06.2014 OG
//# - chg: Text von ID_MENU_FAVORITEN etwas gekuerzt
//#
//# 07.05.2014 OG
//# - chg: ID_MENU_FAVORITEN_en
//#
//# 18.04.2014 OG
//# - chg: Textanpassung: param_NaviGpsMinSat_de, param_NaviStickThreshold_de
//#
//# 17.04.2014 OG
//# - add: param_Servo3OnValue, param_Servo3OffValue, param_Servo4OnValue
//# param_Servo4OffValue
//# - add: param_NaviMaxFlyingRange, param_NaviDescendRange
//# - chg: Textanpassung: param_WARN_J16_Bitmask_de, param_WARN_J17_Bitmask_de
//# - chg: Textanpassung: param_J16Bitmask, param_J16Timing
//# - chg: Textanpassung: param_J17Bitmask, param_J17Timing
//# - chg: Textanpassung: param_SingleWpSpeed_de
//# - chg: Textanpassung: param_ServoNickRefresh_de, param_ServoManualControlSpeed_de
//# - chg: Textanpassung: param_ServoRollControl_de
//#
//# 07.04.2014 OG
//# - chg: kleine Aenderungen an englischen Texten
//#
//# 06.04.2014 CB
//# - add: englische Menütexte ergänzt
//#
//# 30.03.2014 OG
//# - chg: Sprache Hollaendisch vollstaendig entfernt
//#
//# 28.03.2014 OG
//# - add: paramID-Texte fuer Rev. 100
//# (param_AutoPhotoDistance, param_AutoPhotoAtitudes, param_SingleWpSpeed)
//#
//# 16.03.2014 OG
//# erste groesstenteils fertige Version
//#
//# 23.02.2014 OG - NEU
//############################################################################
#ifndef _MKPARAMETERS_MESSAGES_H
#define _MKPARAMETERS_MESSAGES_H
//#############################################################################################
//# Texte: Menues von mkparameters
//#############################################################################################
static const char ID_MENU_TEST_de[] PROGMEM = "TEST/DEBUG";
#define ID_MENU_TEST_en ID_MENU_TEST_de
static const char ID_MENU_FAVORITEN_de[] PROGMEM = "Favoriten";
static const char ID_MENU_FAVORITEN_en[] PROGMEM = "Favorites";
static const char ID_MENU_KANAELE_de[] PROGMEM = "Kanäle";
static const char ID_MENU_KANAELE_en[] PROGMEM = "Channel";
static const char ID_MENU_KONFIGURATION_de[] PROGMEM = "Konfiguration";
static const char ID_MENU_KONFIGURATION_en[] PROGMEM = "Configuration";
static const char ID_MENU_STICK_de[] PROGMEM = "Stick";
#define ID_MENU_STICK_en ID_MENU_STICK_de
static const char ID_MENU_LOOPING_de[] PROGMEM = "Looping";
#define ID_MENU_LOOPING_en ID_MENU_LOOPING_de
static const char ID_MENU_HOEHE_de[] PROGMEM = "Höhe";
static const char ID_MENU_HOEHE_en[] PROGMEM = "Altitude";
static const char ID_MENU_KAMERA_de[] PROGMEM = "Kamera";
static const char ID_MENU_KAMERA_en[] PROGMEM = "Camera";
static const char ID_MENU_NAVICTRL_de[] PROGMEM = "Navi-Ctrl";
#define ID_MENU_NAVICTRL_en ID_MENU_NAVICTRL_de
static const char ID_MENU_AUSGAENGE_de[] PROGMEM = "Ausgänge";
static const char ID_MENU_AUSGAENGE_en[] PROGMEM = "Outputs";
static const char ID_MENU_VERSCHIEDENES_de[] PROGMEM = "Verschiedenes";
static const char ID_MENU_VERSCHIEDENES_en[] PROGMEM = "Miscellaneous";
static const char ID_MENU_GYRO_de[] PROGMEM = "Gyro";
#define ID_MENU_GYRO_en ID_MENU_GYRO_de
static const char ID_MENU_BENUTZER_de[] PROGMEM = "Benutzer";
static const char ID_MENU_BENUTZER_en[] PROGMEM = "User";
static const char ID_MENU_ACHSKOPPLUNG_de[] PROGMEM = "Achskopplung";
static const char ID_MENU_ACHSKOPPLUNG_en[] PROGMEM = "Coupl Axes";
/*
static const char ID_MENU_MIXERSETUP_de[] PROGMEM = "Mixer-Setup";
static const char ID_MENU_MIXERSETUP_en[] PROGMEM = "Config Mix";
*/
static const char ID_MENU_EASYSETUP_de[] PROGMEM = "Easy Setup";
#define ID_MENU_EASYSETUP_en ID_MENU_EASYSETUP_de
//#############################################################################################
//# Bezeichnungen der paramID's
//#############################################################################################
// Hier ist erstmal alles deklariert was auch in paramset.h vorhanden ist.
// Wenn der Compiler richtig eingestellt ist, dann wird alles nicht benoetigte wegoptimiert!
static const char param_Hoehe_MinGas_de[] PROGMEM = "Min. Gas";
static const char param_Hoehe_MinGas_en[] PROGMEM = "min. throttle";
static const char param_Luftdruck_D_de[] PROGMEM = "Luftdruck D";
static const char param_Luftdruck_D_en[] PROGMEM = "barometric D";
static const char param_HoeheChannel_de[] PROGMEM = "Höhe Sollwert";
static const char param_HoeheChannel_en[] PROGMEM = "hight setpoint";
static const char param_Hoehe_P_de[] PROGMEM = "Höhe P";
static const char param_Hoehe_P_en[] PROGMEM = "altitude P";
static const char param_Hoehe_Verstaerkung_de[] PROGMEM = "Verstärk./Rate";
static const char param_Hoehe_Verstaerkung_en[] PROGMEM = "gain rate";
static const char param_Hoehe_ACC_Wirkung_de[] PROGMEM = "Z-ACC";
#define param_Hoehe_ACC_Wirkung_en param_Hoehe_ACC_Wirkung_de
static const char param_Hoehe_HoverBand_de[] PROGMEM = "Schwebe-Gas";
static const char param_Hoehe_HoverBand_en[] PROGMEM = "hoover throttle";
static const char param_Hoehe_GPS_Z_de[] PROGMEM = "GPS Z";
#define param_Hoehe_GPS_Z_en param_Hoehe_GPS_Z_de
static const char param_Hoehe_Tilt_Comp_de[] PROGMEM = "Tilt Compensation";
#define param_Hoehe_Tilt_Comp_en param_Hoehe_Tilt_Comp_de
static const char param_Hoehe_StickNeutralPoint_de[] PROGMEM = "Stick Neutr.Punkt";
static const char param_Hoehe_StickNeutralPoint_en[] PROGMEM = "stick neutr.point";
static const char param_Stick_P_de[] PROGMEM = "Nick/Roll P";
static const char param_Stick_D_de[] PROGMEM = "Nick/Roll D";
static const char param_StickGier_P_de[] PROGMEM = "Gier P";
#define param_Stick_P_en param_Stick_P_de
#define param_Stick_D_en param_Stick_D_de
#define param_StickGier_P_en param_StickGier_P_de
static const char param_Gas_Min_de[] PROGMEM = "Min. Gas";
static const char param_Gas_Min_en[] PROGMEM = "min. throttle";
static const char param_Gas_Max_de[] PROGMEM = "Max. Gas";
static const char param_Gas_Max_en[] PROGMEM = "max. throttle";
static const char param_GyroAccFaktor_de[] PROGMEM = "ACC/Gyro Faktor";
#define param_GyroAccFaktor_en param_GyroAccFaktor_de
static const char param_KompassWirkung_de[] PROGMEM = "Kompasswirkung";
static const char param_KompassWirkung_en[] PROGMEM = "compass effect";
static const char param_Gyro_P_de[] PROGMEM = "Gyro P";
static const char param_Gyro_I_de[] PROGMEM = "Gyro I";
static const char param_Gyro_D_de[] PROGMEM = "Gyro D";
static const char param_Gyro_Gier_P_de[] PROGMEM = "Gier P";
static const char param_Gyro_Gier_I_de[] PROGMEM = "Gier I";
static const char param_Gyro_Stability_de[] PROGMEM = "Gyro stab.";
#define param_Gyro_P_en param_Gyro_P_de
#define param_Gyro_I_en param_Gyro_I_de
#define param_Gyro_D_en param_Gyro_D_de
#define param_Gyro_Gier_P_en param_Gyro_Gier_P_de
#define param_Gyro_Gier_I_en param_Gyro_Gier_I_de
#define param_Gyro_Stability_en param_Gyro_Stability_de
static const char param_UnterspannungsWarnung_de[] PROGMEM = "Unterspannung [0.1V]";
static const char param_UnterspannungsWarnung_en[] PROGMEM = "undervoltage [0.1V]";
static const char param_NotGas_de[] PROGMEM = "NOT-Gas";
static const char param_NotGas_en[] PROGMEM = "Emerg.Throttle";
static const char param_NotGasZeit_de[] PROGMEM = "NOT-Gas Zeit [0.1s]";
static const char param_NotGasZeit_en[] PROGMEM = "Emerg.Thro.Time[0.1s]";
static const char param_Receiver_de[] PROGMEM = "Receiver";
#define param_Receiver_en param_Receiver_de
static const char param_I_Faktor_de[] PROGMEM = "Hauptregler I";
static const char param_I_Faktor_en[] PROGMEM = "main I";
static const char param_UserParam1_de[] PROGMEM = "Parameter 1";
static const char param_UserParam2_de[] PROGMEM = "Parameter 2";
static const char param_UserParam3_de[] PROGMEM = "Parameter 3";
static const char param_UserParam4_de[] PROGMEM = "Parameter 4";
#define param_UserParam1_en param_UserParam1_de
#define param_UserParam2_en param_UserParam2_de
#define param_UserParam3_en param_UserParam3_de
#define param_UserParam4_en param_UserParam4_de
static const char param_ServoNickControl_de[] PROGMEM = "Nick Ansteuerung";
static const char param_ServoNickControl_en[] PROGMEM = "nick servo ctrl";
static const char param_ServoNickComp_de[] PROGMEM = "Nick Kompensation";
static const char param_ServoNickComp_en[] PROGMEM = "nick servo comp.";
static const char param_ServoNickFails_de[] PROGMEM = "Nick Failsave Wert";
static const char param_ServoNickFails_en[] PROGMEM = "nick failsave value";
static const char param_ServoNickMin_de[] PROGMEM = "Nick Servo Minimum";
static const char param_ServoNickMax_de[] PROGMEM = "Nick Servo Maximum";
#define param_ServoNickMin_en param_ServoNickMin_de
#define param_ServoNickMax_en param_ServoNickMax_de
static const char param_ServoRollControl_de[] PROGMEM = "Roll Ansteuerung";
static const char param_ServoRollControl_en[] PROGMEM = "roll servo ctrl.";
static const char param_ServoRollComp_de[] PROGMEM = "Roll Kompensation";
static const char param_ServoRollComp_en[] PROGMEM = "roll compensation";
static const char param_ServoRollFails_de[] PROGMEM = "Roll Failsave Wert";
static const char param_ServoRollFails_en[] PROGMEM = "roll failsave value";
static const char param_ServoRollMin_de[] PROGMEM = "Roll Minimum";
static const char param_ServoRollMax_de[] PROGMEM = "Roll Maximum";
#define param_ServoRollMin_en param_ServoRollMin_de
#define param_ServoRollMax_en param_ServoRollMax_de
//static const char param_ServoNickRefresh_de[] PROGMEM = "Anst. Geschw."; // ALT
static const char param_ServoNickRefresh_de[] PROGMEM = "Anst. Geschwindigkeit";
static const char param_ServoNickRefresh_en[] PROGMEM = "servo refresh";
static const char param_ServoManualControlSpeed_de[] PROGMEM = "Manu. Geschwindigkeit.";
static const char param_ServoManualControlSpeed_en[] PROGMEM = "manuell Speed";
static const char param_CamOrientation_de[] PROGMEM = "Cam Richtung";
static const char param_CamOrientation_en[] PROGMEM = "cam orientation";
static const char param_Servo3_de[] PROGMEM = "Servo 3";
#define param_Servo3_en param_Servo3_de
static const char param_Servo3Fails_de[] PROGMEM = "Servo 3 Failsave Wert";
static const char param_Servo3Fails_en[] PROGMEM = "Servo 3 failsave value";
static const char param_Servo4_de[] PROGMEM = "Servo 4";
#define param_Servo4_en param_Servo4_de
static const char param_Servo4Fails_de[] PROGMEM = "Servo 4 Failsave Wert";
static const char param_Servo4Fails_en[] PROGMEM = "Servo 4 failsave value";
static const char param_Servo5_de[] PROGMEM = "Servo 5";
#define param_Servo5_en param_Servo5_de
static const char param_Servo5Fails_de[] PROGMEM = "Servo 5 Failsave Wert";
static const char param_Servo5Fails_en[] PROGMEM = "Servo 5 failsave value";
static const char param_Servo3OnValue_de[] PROGMEM = "Servo 3 On Out1/2";
static const char param_Servo3OffValue_de[] PROGMEM = "Servo 3 Off Out1/2";
static const char param_Servo4OnValue_de[] PROGMEM = "Servo 4 On Out1/2";
static const char param_Servo4OffValue_de[] PROGMEM = "Servo 4 Off Out1/2";
#define param_Servo3OnValue_en param_Servo3OnValue_de
#define param_Servo3OffValue_en param_Servo3OffValue_de
#define param_Servo4OnValue_en param_Servo4OnValue_de
#define param_Servo4OffValue_en param_Servo4OffValue_de
static const char param_LoopGasLimit_de[] PROGMEM = "Looping Gas Limit";
static const char param_LoopGasLimit_en[] PROGMEM = "loop throttle limit";
static const char param_LoopThreshold_de[] PROGMEM = "Ansprechschwelle";
static const char param_LoopThreshold_en[] PROGMEM = "response threshold";
static const char param_LoopHysterese_de[] PROGMEM = "Hysterese";
static const char param_LoopHysterese_en[] PROGMEM = "hysteresis";
static const char param_AchsKopplung1_de[] PROGMEM = "Gier pos. Kopplung";
static const char param_AchsKopplung1_en[] PROGMEM = "gier pos. coupling";
static const char param_AchsKopplung2_de[] PROGMEM = "Nick/Roll Kopplung";
static const char param_AchsKopplung2_en[] PROGMEM = "nick/roll coupling";
static const char param_CouplingYawCorrection_de[] PROGMEM = "Gier Korrektur";
static const char param_CouplingYawCorrection_en[] PROGMEM = "gier correction";
static const char param_WinkelUmschlagNick_de[] PROGMEM = "Nick Umkehrpunkt";
static const char param_WinkelUmschlagNick_en[] PROGMEM = "nick turnover";
static const char param_WinkelUmschlagRoll_de[] PROGMEM = "Roll Umkehrpunkt";
static const char param_WinkelUmschlagRoll_en[] PROGMEM = "roll turnover";
static const char param_GyroAccAbgleich_de[] PROGMEM = "ACC/Gyro Komp. [1/x]";
static const char param_GyroAccAbgleich_en[] PROGMEM = "ACC/Gyro Comp. [1/x]";
static const char param_Driftkomp_de[] PROGMEM = "Drift-Kompensation";
static const char param_Driftkomp_en[] PROGMEM = "drift compensation";
static const char param_DynamicStability_de[] PROGMEM = "Dynamische Stabilität";
static const char param_DynamicStability_en[] PROGMEM = "dynamic stabiliy";
static const char param_UserParam5_de[] PROGMEM = "Parameter 5";
static const char param_UserParam6_de[] PROGMEM = "Parameter 6";
static const char param_UserParam7_de[] PROGMEM = "Parameter 7";
static const char param_UserParam8_de[] PROGMEM = "Parameter 8";
#define param_UserParam5_en param_UserParam5_de
#define param_UserParam6_en param_UserParam6_de
#define param_UserParam7_en param_UserParam7_de
#define param_UserParam8_en param_UserParam8_de
static const char param_J16Bitmask_de[] PROGMEM = "Out1: Bitmaske";
static const char param_J16Bitmask_en[] PROGMEM = "Out1: bitmask";
static const char param_J16Timing_de[] PROGMEM = "Out1: Timing [10ms]";
#define param_J16Timing_en param_J16Timing_de
static const char param_J17Bitmask_de[] PROGMEM = "Out2: Bitmaske";
static const char param_J17Bitmask_en[] PROGMEM = "Out2: bitmask";
static const char param_J17Timing_de[] PROGMEM = "Out2: Timing [10ms]";
#define param_J17Timing_en param_J17Timing_de
static const char param_WARN_J16_Bitmask_de[] PROGMEM = "Out1 Warn UBat";
static const char param_WARN_J16_Bitmask_en[] PROGMEM = "Out1 undervolt warn";
static const char param_WARN_J17_Bitmask_de[] PROGMEM = "Out2 Warn UBat";
static const char param_WARN_J17_Bitmask_en[] PROGMEM = "Out2 undervolt warn";
static const char param_AutoPhotoDistance_de[] PROGMEM = "Auto Trigger Dist.[m]"; // ab Rev. 100 (z.B. FC 2.05e)
#define param_AutoPhotoDistance_en param_AutoPhotoDistance_de // ab Rev. 100 (z.B. FC 2.05e)
static const char param_AutoPhotoAtitudes_de[] PROGMEM = "Auto Trigger Alt. [m]"; // ab Rev. 100 (z.B. FC 2.05e)
#define param_AutoPhotoAtitudes_en param_AutoPhotoAtitudes_de // ab Rev. 100 (z.B. FC 2.05e)
#define param_NaviOut1Parameter_de param_AutoPhotoDistance_de // bis Rev. 98
#define param_NaviOut1Parameter_en param_AutoPhotoDistance_de // bis Rev. 98
static const char param_SingleWpSpeed_de[] PROGMEM = "SingleWP Speed 0.1m/s"; // ab Rev. 100 (z.B. FC 2.05e)
#define param_SingleWpSpeed_en param_SingleWpSpeed_de // ab Rev. 100 (z.B. FC 2.05e)
static const char param_LandingPulse_de[] PROGMEM = "ACC Z Landing Pulse"; // ab Rev. 104 (FC 2.09d)
#define param_LandingPulse_en param_LandingPulse_de // ab Rev. 104 (FC 2.09d)
static const char param_NaviGpsModeChannel_de[] PROGMEM = "GPS Modus Steuerung";
static const char param_NaviGpsModeChannel_en[] PROGMEM = "GPS mode control";
static const char param_NaviGpsGain_de[] PROGMEM = "GPS Verstärkung [%]";
static const char param_NaviGpsGain_en[] PROGMEM = "GPS gain [%]";
static const char param_NaviGpsP_de[] PROGMEM = "GPS-P";
static const char param_NaviGpsI_de[] PROGMEM = "GPS-I";
static const char param_NaviGpsD_de[] PROGMEM = "GPS-D";
static const char param_NaviGpsPLimit_de[] PROGMEM = "GPS-P Limit";
static const char param_NaviGpsILimit_de[] PROGMEM = "GPS-I Limit";
static const char param_NaviGpsDLimit_de[] PROGMEM = "GPS-D Limit";
static const char param_NaviGpsA_de[] PROGMEM = "GPS Acc";
#define param_NaviGpsP_en param_NaviGpsP_de
#define param_NaviGpsI_en param_NaviGpsI_de
#define param_NaviGpsD_en param_NaviGpsD_de
#define param_NaviGpsPLimit_en param_NaviGpsPLimit_de
#define param_NaviGpsILimit_en param_NaviGpsILimit_de
#define param_NaviGpsDLimit_en param_NaviGpsDLimit_de
#define param_NaviGpsA_en param_NaviGpsA_de
static const char param_NaviGpsMinSat_de[] PROGMEM = "Min. Satelliten";
static const char param_NaviGpsMinSat_en[] PROGMEM = "minimum satelite";
static const char param_NaviStickThreshold_de[] PROGMEM = "GPS Stick-Schwelle";
static const char param_NaviStickThreshold_en[] PROGMEM = "GPS stick threshold";
static const char param_NaviWindCorrection_de[] PROGMEM = "GPS Windkorrektur [%]";
static const char param_NaviWindCorrection_en[] PROGMEM = "GPS wind correct. [%]";
static const char param_NaviAccCompensation_de[] PROGMEM = "ACC Kompensation";
static const char param_NaviAccCompensation_en[] PROGMEM = "ACC compensation";
static const char param_NaviOperatingRadius_de[] PROGMEM = "max. Radius";
static const char param_NaviOperatingRadius_en[] PROGMEM = "max. radius";
static const char param_NaviAngleLimitation_de[] PROGMEM = "Winkel Limit";
static const char param_NaviAngleLimitation_en[] PROGMEM = "angle limit";
static const char param_NaviPH_LoginTime_de[] PROGMEM = "PH Login Zeit [s]";
static const char param_NaviPH_LoginTime_en[] PROGMEM = "PH login time [s]";
static const char param_ExternalControl_de[] PROGMEM = "Ext. Kontrolle";
static const char param_ExternalControl_en[] PROGMEM = "ext. control";
static const char param_OrientationAngle_de[] PROGMEM = "OrientationAngle";
#define param_OrientationAngle_en param_OrientationAngle_de
static const char param_CareFreeChannel_de[] PROGMEM = "CareFree Steuerung";
static const char param_CareFreeChannel_en[] PROGMEM = "careFree control";
static const char param_MotorSafetySwitch_de[] PROGMEM = "Motor Sicherh.Schalt.";
static const char param_MotorSafetySwitch_en[] PROGMEM = "motor safety switch";
static const char param_MotorSmooth_de[] PROGMEM = "Motor Glättung";
static const char param_MotorSmooth_en[] PROGMEM = "motor smooth";
static const char param_ComingHomeAltitude_de[] PROGMEM = "Com.Home Höhe [m]";
static const char param_ComingHomeAltitude_en[] PROGMEM = "coming home alti. [m]";
static const char param_FailSafeTime_de[] PROGMEM = "Fails. CH Zeit [s]";
static const char param_FailSafeTime_en[] PROGMEM = "fails. CH time [s]";
static const char param_MaxAltitude_de[] PROGMEM = "Max. Höhe [m]";
static const char param_MaxAltitude_en[] PROGMEM = "max. altitude [m]";
static const char param_FailsafeChannel_de[] PROGMEM = "Fails. Channel 0=Aus";
static const char param_FailsafeChannel_en[] PROGMEM = "fails. channel 0=off";
static const char param_ServoFilterNick_de[] PROGMEM = "Nick Filter";
static const char param_ServoFilterNick_en[] PROGMEM = "nick filter";
static const char param_ServoFilterRoll_de[] PROGMEM = "Roll Filter";
static const char param_ServoFilterRoll_en[] PROGMEM = "roll filter";
static const char param_StartLandChannel_de[] PROGMEM = "Auto StartLand Kanal";
static const char param_StartLandChannel_en[] PROGMEM = "auto start/land chan.";
static const char param_LandingSpeed_de[] PROGMEM = "Landing Speed 0.1m/s";
#define param_LandingSpeed_en param_LandingSpeed_de
static const char param_CompassOffset_de[] PROGMEM = "Compass Offset [\x0B]";
#define param_CompassOffset_en param_CompassOffset_de
static const char param_AutoLandingVoltage_de[] PROGMEM = "Autoland. Volt [0.1V]";
#define param_AutoLandingVoltage_en param_AutoLandingVoltage_de
static const char param_ComingHomeVoltage_de[] PROGMEM = "Coming H. Volt [0.1V]";
#define param_ComingHomeVoltage_en param_ComingHomeVoltage_de
static const char param_BitConfig_de[] PROGMEM = "BitConfig";
static const char param_ServoCompInvert_de[] PROGMEM = "ServoCompInvert";
static const char param_ExtraConfig_de[] PROGMEM = "ExtraConfig";
static const char param_GlobalConfig3_de[] PROGMEM = "GlobalConfig3";
static const char param_Name_de[] PROGMEM = "Setting Name";
#define param_BitConfig_en param_BitConfig_de
#define param_ServoCompInvert_en param_ServoCompInvert_de
#define param_ExtraConfig_en param_ExtraConfig_de
#define param_GlobalConfig3_en param_GlobalConfig3_de
#define param_Name_en param_Name_de
static const char param_ComingHomeOrientation_de[] PROGMEM = "CH Ausrichtung";
static const char param_ComingHomeOrientation_en[] PROGMEM = "CH orientation";
static const char param_SingleWpControlChannel_de[] PROGMEM = "Single WP Ctrl Chan.";
#define param_SingleWpControlChannel_en param_SingleWpControlChannel_de
static const char param_MenuKeyChannel_de[] PROGMEM = "Next WP Channel";
#define param_MenuKeyChannel_en param_MenuKeyChannel_de
// subitems (Bit / Byte-Felder)
static const char param_ServoCompInvert_SVNick_de[] PROGMEM = "Nick Umkehren";
static const char param_ServoCompInvert_SVNick_en[] PROGMEM = "nick inv. direction";
static const char param_ServoCompInvert_SVRoll_de[] PROGMEM = "Roll Umkehren";
static const char param_ServoCompInvert_SVRoll_en[] PROGMEM = "Roll inv. direction";
static const char param_ServoCompInvert_SVRelMov_de[] PROGMEM = "Nick Relativ";
static const char param_ServoCompInvert_SVRelMov_en[] PROGMEM = "nick relativ";
static const char param_ExtraConfig_HeightLimit_de[] PROGMEM = "Höhenbegrenzung";
static const char param_ExtraConfig_HeightLimit_en[] PROGMEM = "heigth limitation";
static const char param_ExtraConfig_HeightVario_de[] PROGMEM = "Vario-Höhe"; // negiert param_ExtraConfig_HeightLimit
static const char param_ExtraConfig_HeightVario_en[] PROGMEM = "vario heigth"; // negiert param_ExtraConfig_HeightLimit
static const char param_ExtraConfig_VarioBeep_de[] PROGMEM = "akust. Vario";
#define param_ExtraConfig_VarioBeep_en param_ExtraConfig_VarioBeep_de
static const char param_ExtraConfig_SensitiveRc_de[] PROGMEM = "Erw. Empf.Sig.Prüfung";
static const char param_ExtraConfig_SensitiveRc_en[] PROGMEM = "enh. rec. sign. check";
static const char param_ExtraConfig_33vReference_de[] PROGMEM = "33vReference";
#define param_ExtraConfig_33vReference_en param_ExtraConfig_33vReference_de
static const char param_ExtraConfig_NoRcOffBeeping_de[] PROGMEM = "k.Summer o.Sender";
static const char param_ExtraConfig_NoRcOffBeeping_en[] PROGMEM = "no beep without TX";
static const char param_ExtraConfig_GpsAid_de[] PROGMEM = "Dynamic PH";
#define param_ExtraConfig_GpsAid_en param_ExtraConfig_GpsAid_de
static const char param_ExtraConfig_LearnableCarefree_de[] PROGMEM = "Teachable CF";
#define param_ExtraConfig_LearnableCarefree_en param_ExtraConfig_LearnableCarefree_de
static const char param_ExtraConfig_IgnoreMagErrAtStartup_de[] PROGMEM = "Kompass Fehler ignor.";
static const char param_ExtraConfig_IgnoreMagErrAtStartup_en[] PROGMEM = "ignore compass error";
static const char param_BitConfig_LoopOben_de[] PROGMEM = "Looping Oben";
static const char param_BitConfig_LoopOben_en[] PROGMEM = "looping up";
static const char param_BitConfig_LoopUnten_de[] PROGMEM = "Looping Unten";
static const char param_BitConfig_LoopUnten_en[] PROGMEM = "looping down";
static const char param_BitConfig_LoopLinks_de[] PROGMEM = "Looping Links";
static const char param_BitConfig_LoopLinks_en[] PROGMEM = "looping left";
static const char param_BitConfig_LoopRechts_de[] PROGMEM = "Looping Rechts";
static const char param_BitConfig_LoopRechts_en[] PROGMEM = "looping right";
static const char param_BitConfig_MotorBlink1_de[] PROGMEM = "nur wenn Motor An";
static const char param_BitConfig_MotorBlink1_en[] PROGMEM = "only with motor on";
static const char param_BitConfig_MotorOffLed1_de[] PROGMEM = " \x19 sofort an";
static const char param_BitConfig_MotorOffLed1_en[] PROGMEM = " \x19 immediately on";
#define param_BitConfig_MotorOffLed2_de param_BitConfig_MotorOffLed1_de
#define param_BitConfig_MotorBlink2_de param_BitConfig_MotorBlink1_de
#define param_BitConfig_MotorOffLed2_en param_BitConfig_MotorOffLed1_en
#define param_BitConfig_MotorBlink2_en param_BitConfig_MotorBlink1_en
static const char param_GlobalConfig3_NoSdCardNoStart_de[] PROGMEM = "k.Start o.SD-Karte";
static const char param_GlobalConfig3_NoSdCardNoStart_en[] PROGMEM = "no start w/o SD-card";
static const char param_GlobalConfig3_DphMaxRadius_de[] PROGMEM = "Max.Radius dPH";
#define param_GlobalConfig3_DphMaxRadius_en param_GlobalConfig3_DphMaxRadius_de
static const char param_GlobalConfig3_VarioFailsafe_de[] PROGMEM = "NOT-Gas Vario Höhe";
static const char param_GlobalConfig3_VarioFailsafe_en[] PROGMEM = "Emerg.thr.vario h.";
static const char param_GlobalConfig3_MotorSwitchMode_de[] PROGMEM = "Motor Swi.Mode";
#define param_GlobalConfig3_MotorSwitchMode_en param_GlobalConfig3_MotorSwitchMode_de
static const char param_GlobalConfig3_NoGpsFixNoStart_de[] PROGMEM = "k.Start o.GPS Fix";
static const char param_GlobalConfig3_NoGpsFixNoStart_en[] PROGMEM = "no start w/o GPS Fix";
static const char param_GlobalConfig3_UseNcForOut1_de[] PROGMEM = "mit WP-Event verkn.";
static const char param_GlobalConfig3_UseNcForOut1_en[] PROGMEM = "combine with WP-Event";
static const char param_GlobalConfig3_SpeakAll_de[] PROGMEM = "Alles Ansagen";
static const char param_GlobalConfig3_SpeakAll_en[] PROGMEM = "speak all";
static const char param_GlobalConfig3_ServoNickCompOff_de[] PROGMEM = "Nick Komp. Aus";
static const char param_GlobalConfig3_ServoNickCompOff_en[] PROGMEM = "nick compensation off";
static const char param_GlobalConfig_HoehenRegelung_de[] PROGMEM = "Höhenregelung";
static const char param_GlobalConfig_HoehenRegelung_en[] PROGMEM = "height control";
static const char param_GlobalConfig_HoehenSchalter_de[] PROGMEM = "Schalter Höhe";
static const char param_GlobalConfig_HoehenSchalter_en[] PROGMEM = "height switch";
static const char param_GlobalConfig_HeadingHold_de[] PROGMEM = "Heading Hold";
#define param_GlobalConfig_HeadingHold_en param_GlobalConfig_HeadingHold_de
static const char param_GlobalConfig_KompassAktiv_de[] PROGMEM = "Kompass Aktiv";
static const char param_GlobalConfig_KompassAktiv_en[] PROGMEM = "compass aktiv";
static const char param_GlobalConfig_KompassFix_de[] PROGMEM = "Kompass Fix";
static const char param_GlobalConfig_KompassFix_en[] PROGMEM = "compass fix";
static const char param_GlobalConfig_GpsAktiv_de[] PROGMEM = "GPS Aktiv";
#define param_GlobalConfig_GpsAktiv_en param_GlobalConfig_GpsAktiv_de
static const char param_GlobalConfig_AchsenkopplungAktiv_de[] PROGMEM = "Achs(ent)kopplung";
static const char param_GlobalConfig_AchsenkopplungAktiv_en[] PROGMEM = "(De)Coupl Axes";
static const char param_GlobalConfig_DrehratenBegrenzer_de[] PROGMEM = "Drehratenbegrenzung";
static const char param_GlobalConfig_DrehratenBegrenzer_en[] PROGMEM = "rotary rate limit.";
static const char param_Kanalbelegung_Nick_de[] PROGMEM = "Nick";
static const char param_Kanalbelegung_Roll_de[] PROGMEM = "Roll";
#define param_Kanalbelegung_Nick_en param_Kanalbelegung_Nick_de
#define param_Kanalbelegung_Roll_en param_Kanalbelegung_Roll_de
static const char param_Kanalbelegung_Gas_de[] PROGMEM = "Gas";
static const char param_Kanalbelegung_Gas_en[] PROGMEM = "throttle";
static const char param_Kanalbelegung_Gear_de[] PROGMEM = "Gear";
#define param_Kanalbelegung_Gear_en param_Kanalbelegung_Gear_de
static const char param_Kanalbelegung_Poti1_de[] PROGMEM = "Poti 1";
static const char param_Kanalbelegung_Poti2_de[] PROGMEM = "Poti 2";
static const char param_Kanalbelegung_Poti3_de[] PROGMEM = "Poti 3";
static const char param_Kanalbelegung_Poti4_de[] PROGMEM = "Poti 4";
static const char param_Kanalbelegung_Poti5_de[] PROGMEM = "Poti 5";
static const char param_Kanalbelegung_Poti6_de[] PROGMEM = "Poti 6";
static const char param_Kanalbelegung_Poti7_de[] PROGMEM = "Poti 7";
static const char param_Kanalbelegung_Poti8_de[] PROGMEM = "Poti 8";
#define param_Kanalbelegung_Poti1_en param_Kanalbelegung_Poti1_de
#define param_Kanalbelegung_Poti2_en param_Kanalbelegung_Poti2_de
#define param_Kanalbelegung_Poti3_en param_Kanalbelegung_Poti3_de
#define param_Kanalbelegung_Poti4_en param_Kanalbelegung_Poti4_de
#define param_Kanalbelegung_Poti5_en param_Kanalbelegung_Poti5_de
#define param_Kanalbelegung_Poti6_en param_Kanalbelegung_Poti6_de
#define param_Kanalbelegung_Poti7_en param_Kanalbelegung_Poti7_de
#define param_Kanalbelegung_Poti8_en param_Kanalbelegung_Poti8_de
static const char param_CompassOffset_DisableDeclCalc_de[] PROGMEM = "Disable Decl. Calc";
#define param_CompassOffset_DisableDeclCalc_en param_CompassOffset_DisableDeclCalc_de
static const char param_NaviMaxFlyingRange_de[] PROGMEM = "Max. Flugradius [10m]";
static const char param_NaviMaxFlyingRange_en[] PROGMEM = "Max. Flightrad. [10m]";
static const char param_NaviDescendRange_de[] PROGMEM = "Fail SinkRadius [10m]";
#define param_NaviDescendRange_en param_NaviDescendRange_de
#endif // _MKPARAMETERS_H