Rev 838 |
Blame |
Compare with Previous |
Last modification |
View Log
| RSS feed
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* irsndconfig.h
*
* Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de
*
* $Id: irsndconfig.h,v 1.17 2011/01/18 13:02:15 fm Exp $
*
* ATMEGA88 @ 8 MHz
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef F_INTERRUPTS
#define F_INTERRUPTS 20000 // interrupts per second
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change settings from 1 to 0 if you want to disable one or more encoders.
* This saves program space.
* 1 enable decoder
* 0 disable decoder
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
// Protocol Enable Remarks F_INTERRUPTS Program Space
#define IRSND_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 uses ~150 bytes
#define IRSND_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 uses ~100 bytes
#define IRSND_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 uses ~300 bytes
#define IRSND_SUPPORT_MATSUSHITA_PROTOCOL 0 // Matsushita >= 10000 uses ~200 bytes
#define IRSND_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 uses ~150 bytes
#define IRSND_SUPPORT_RC5_PROTOCOL 1 // RC5 >= 10000 uses ~150 bytes
#define IRSND_SUPPORT_DENON_PROTOCOL 0 // DENON, Sharp >= 10000 uses ~200 bytes
#define IRSND_SUPPORT_JVC_PROTOCOL 1 // JVC >= 10000 uses ~150 bytes
#define IRSND_SUPPORT_RC6_PROTOCOL 0 // RC6 >= 10000 uses ~250 bytes
#define IRSND_SUPPORT_RC6A_PROTOCOL 0 // RC6A >= 10000 uses ~250 bytes
#define IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang&Olufsen >= 10000 uses ~250 bytes
#define IRSND_SUPPORT_GRUNDIG_PROTOCOL 1 // Grundig >= 10000 uses ~300 bytes
#define IRSND_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 uses ~400 bytes
#define IRSND_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 uses ~100 bytes
#define IRSND_SUPPORT_NIKON_PROTOCOL 1 // NIKON >= 10000 uses ~150 bytes
#define IRSND_SUPPORT_FDC_PROTOCOL 0 // FDC IR keyboard >= 10000 (better 15000) uses ~150 bytes
#define IRSND_SUPPORT_RCCAR_PROTOCOL 0 // RC CAR >= 10000 (better 15000) uses ~150 bytes
#define IRSND_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens, Gigaset >= 15000 uses ~150 bytes
#define IRSND_SUPPORT_RECS80_PROTOCOL 1 // RECS80 >= 20000 uses ~100 bytes
#define IRSND_SUPPORT_RECS80EXT_PROTOCOL 1 // RECS80EXT >= 20000 uses ~100 bytes
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change hardware pin here:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#if defined (__AVR_ATmega32__) || defined (__AVR_ATmega644P__)
#define IRSND_PORT PORTD // port D
#define IRSND_DDR DDRD // ddr D
#define IRSND_BIT 7 // OC2A
#else
#define IRSND_PORT PORTB // port B
#define IRSND_DDR DDRB // ddr B
#define IRSND_BIT 3 // OC2A
#endif // __AVR...
#if IRSND_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000
#warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)
#undef IRSND_SUPPORT_SIEMENS_PROTOCOL
#define IRSND_SUPPORT_SIEMENS_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low!
#endif
#if IRSND_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 20000
#warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 20000)
#undef IRSND_SUPPORT_RECS80_PROTOCOL
#define IRSND_SUPPORT_RECS80_PROTOCOL 0
#endif
#if IRSND_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 20000
#warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 20000)
#undef IRSND_SUPPORT_RECS80EXT_PROTOCOL
#define IRSND_SUPPORT_RECS80EXT_PROTOCOL 0
#endif