Go to most recent revision |
Blame |
Compare with Previous |
Last modification |
View Log
| RSS feed
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* irmpconfig.h
*
* Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de
*
* $Id: irmpconfig.h,v 1.43 2010/11/10 08:01:46 fm Exp $
*
* ATMEGA88 @ 8 MHz
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef _IRMPCONFIG_H_
#define _IRMPCONFIG_H_
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change F_INTERRUPTS if you change the number of interrupts per second,
* Normally, F_INTERRUPTS should be in the range from 10000 to 15000.
* A value above 15000 costs additional program space, absolut maximum value is 20000.
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef F_INTERRUPTS
#define F_INTERRUPTS 20000 // interrupts per second, min: 10000, max: 20000
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change settings from 1 to 0 if you want to disable one or more decoders.
* This saves program space.
*
* 1 enable decoder
* 0 disable decoder
*
* The standard decoders are enabled per default.
* Some less common protocols are disabled here, you need to enable them manually.
*
* If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.
* If you don't need RC5 when using FDC/RCCAR, you should disable RC5.
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
// Protocol Enable Remarks F_INTERRUPTS Program Space
#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~100 bytes
#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~250 bytes
#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~250 bytes
#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 0 // Matsushita >= 10000 ~50 bytes
#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes
#define IRMP_SUPPORT_DENON_PROTOCOL 0 // DENON >= 10000 ~250 bytes
#define IRMP_SUPPORT_JVC_PROTOCOL 1 // JVC >= 10000 ~250 bytes
#define IRMP_SUPPORT_RC5_PROTOCOL 1 // RC5 >= 10000 ~250 bytes
#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~200 bytes
#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 1 // Grundig >= 10000 ~150 bytes
#define IRMP_SUPPORT_NOKIA_PROTOCOL 1 // Nokia >= 10000 ~150 bytes
#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes
#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes
#define IRMP_SUPPORT_NIKON_PROTOCOL 1 // NIKON >= 10000 ~250 bytes
#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~50 bytes (~400 in combination with RC5)
#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)
#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~150 bytes
#define IRMP_SUPPORT_RECS80_PROTOCOL 1 // RECS80 >= 20000 ~50 bytes
#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 1 // RECS80EXT >= 20000 ~50 bytes
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change hardware pin here:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifdef PIC_CCS_COMPILER // PIC CCS Compiler:
#define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC
#else // AVR:
#define IRMP_PORT PORTD
#define IRMP_DDR DDRD
#define IRMP_PIN PIND
#define IRMP_BIT 6 // use PD6 as IR input on AVR
#define input(x) ((x) & (1 << IRMP_BIT))
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef IRMP_LOGGING
#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)
#endif
#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000
#warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)
#undef IRMP_SUPPORT_SIEMENS_PROTOCOL
#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0
#endif
#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 20000
#warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 20000)
#undef IRMP_SUPPORT_RECS80_PROTOCOL
#define IRMP_SUPPORT_RECS80_PROTOCOL 0
#endif
#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 20000
#warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 20000)
#undef IRMP_SUPPORT_RECS80EXT_PROTOCOL
#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0
#endif
#if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
#warning JVC protocol needs also NEC protocol, NEC protocol enabled
#undef IRMP_SUPPORT_NEC_PROTOCOL
#define IRMP_SUPPORT_NEC_PROTOCOL 1
#endif
#endif /* _WC_IRMPCONFIG_H_ */