Rev 838 |
Blame |
Compare with Previous |
Last modification |
View Log
| RSS feed
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* irmp.h
*
* Copyright (c) 2009-2010 Frank Meyer - frank(at)fli4l.de
*
* $Id: irmp.h,v 1.45 2011/01/18 13:02:15 fm Exp $
*
* ATMEGA88 @ 8 MHz
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef _WC_IRMP_H_
#define _WC_IRMP_H_
#ifdef __cplusplus
extern "C"
{
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* timing constants:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define IRMP_TIMEOUT_TIME 16500.0e-6 // timeout after 16.5 ms darkness
#define IRMP_TIMEOUT_TIME_MS 16500L // timeout after 16.5 ms darkness
#if IRMP_SUPPORT_NIKON_PROTOCOL == 1
#define IRMP_TIMEOUT_NIKON_TIME 29500.0e-6 // 2nd timeout after 29.5 ms darkness (only for NIKON!)
#define IRMP_TIMEOUT_NIKON_TIME_MS 29500L // 2nd timeout after 29.5 ms darkness
typedef uint16_t PAUSE_LEN;
#define IRMP_TIMEOUT_NIKON_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_NIKON_TIME + 0.5)
#else
#if (F_INTERRUPTS * IRMP_TIMEOUT_TIME_MS) / 1000000 >= 254
typedef uint16_t PAUSE_LEN;
#else
typedef uint8_t PAUSE_LEN;
#endif
#endif
#define IRMP_TIMEOUT_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_TIME + 0.5)
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* IR protocols
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define IRMP_SIRCS_PROTOCOL 1 // Sony
#define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc.
#define IRMP_SAMSUNG_PROTOCOL 3 // Samsung
#define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita
#define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc)
#define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba
#define IRMP_RC5_PROTOCOL 7 // Philips etc
#define IRMP_DENON_PROTOCOL 8 // Denon
#define IRMP_RC6_PROTOCOL 9 // Philips etc
#define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37
#define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC
#define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba
#define IRMP_NUBERT_PROTOCOL 13 // Nubert
#define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen
#define IRMP_GRUNDIG_PROTOCOL 15 // Grundig
#define IRMP_NOKIA_PROTOCOL 16 // Nokia
#define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset
#define IRMP_FDC_PROTOCOL 18 // FDC keyboard
#define IRMP_RCCAR_PROTOCOL 19 // RC Car
#define IRMP_JVC_PROTOCOL 20 // JVC
#define IRMP_RC6A_PROTOCOL 21 // RC6A, e.g. Kathrein, XBOX
#define IRMP_NIKON_PROTOCOL 22 // Nikon
// some flags of struct IRMP_PARAMETER:
#define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01
#define IRMP_PARAM_FLAG_1ST_PULSE_IS_1 0x02
#define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse
#define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause
#define SIRCS_1_PULSE_TIME 1200.0e-6 // 1200 usec pulse
#define SIRCS_0_PULSE_TIME 600.0e-6 // 600 usec pulse
#define SIRCS_PAUSE_TIME 600.0e-6 // 600 usec pause
#define SIRCS_FRAMES 3 // SIRCS sends each frame 3 times
#define SIRCS_AUTO_REPETITION_PAUSE_TIME 25.0e-3 // auto repetition after 25ms
#define SIRCS_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
#define SIRCS_ADDRESS_OFFSET 15 // skip 15 bits
#define SIRCS_ADDRESS_LEN 5 // read up to 5 address bits
#define SIRCS_COMMAND_OFFSET 0 // skip 0 bits
#define SIRCS_COMMAND_LEN 15 // read 12-15 command bits
#define SIRCS_MINIMUM_DATA_LEN 12 // minimum data length
#define SIRCS_COMPLETE_DATA_LEN 20 // complete length - may be up to 20
#define SIRCS_STOP_BIT 0 // has no stop bit
#define SIRCS_LSB 1 // LSB...MSB
#define SIRCS_FLAGS 0 // flags
#define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse
#define NEC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
#define NEC_REPEAT_START_BIT_PAUSE_TIME 2250.0e-6 // 2250 usec pause
#define NEC_PULSE_TIME 560.0e-6 // 560 usec pulse
#define NEC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause
#define NEC_0_PAUSE_TIME 560.0e-6 // 560 usec pause
#define NEC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
#define NEC_ADDRESS_OFFSET 0 // skip 0 bits
#define NEC_ADDRESS_LEN 16 // read 16 address bits
#define NEC_COMMAND_OFFSET 16 // skip 16 bits (8 address + 8 /address)
#define NEC_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command)
#define NEC_COMPLETE_DATA_LEN 32 // complete length
#define NEC_STOP_BIT 1 // has stop bit
#define NEC_LSB 1 // LSB...MSB
#define NEC_FLAGS 0 // flags
#define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse
#define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
#define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse
#define SAMSUNG_1_PAUSE_TIME 1450.0e-6 // 1450 usec pause
#define SAMSUNG_0_PAUSE_TIME 450.0e-6 // 450 usec pause
#define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
#define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits
#define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits
#define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit
#define SAMSUNG_ID_LEN 4 // read 4 id bits
#define SAMSUNG_COMMAND_OFFSET 21 // skip 16 + 1 sync + 4 data bits
#define SAMSUNG_COMMAND_LEN 16 // read 16 command bits
#define SAMSUNG_COMPLETE_DATA_LEN 37 // complete length
#define SAMSUNG_STOP_BIT 1 // has stop bit
#define SAMSUNG_LSB 1 // LSB...MSB?
#define SAMSUNG_FLAGS 0 // flags
#define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits
#define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits
#define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length
#define SAMSUNG32_FRAMES 2 // SAMSUNG32 sends each frame 2 times
#define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms
#define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 40ms
#define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse
#define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause
#define MATSUSHITA_PULSE_TIME 872.0e-6 // 872 usec pulse
#define MATSUSHITA_1_PAUSE_TIME 2616.0e-6 // 2616 usec pause
#define MATSUSHITA_0_PAUSE_TIME 872.0e-6 // 872 usec pause
#define MATSUSHITA_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
#define MATSUSHITA_ADDRESS_OFFSET 12 // skip 12 bits
#define MATSUSHITA_ADDRESS_LEN 12 // read 12 address bits
#define MATSUSHITA_COMMAND_OFFSET 0 // skip 0 bits
#define MATSUSHITA_COMMAND_LEN 12 // read 12 bits (6 custom + 6 command)
#define MATSUSHITA_COMPLETE_DATA_LEN 24 // complete length
#define MATSUSHITA_STOP_BIT 1 // has stop bit
#define MATSUSHITA_LSB 1 // LSB...MSB?
#define MATSUSHITA_FLAGS 0 // flags
#define KASEIKYO_START_BIT_PULSE_TIME 3380.0e-6 // 3380 usec pulse
#define KASEIKYO_START_BIT_PAUSE_TIME 1690.0e-6 // 1690 usec pause
#define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse
#define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause
#define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause
#define KASEIKYO_AUTO_REPETITION_PAUSE_TIME 74.0e-3 // repetition after 74 ms
#define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 74.0e-3 // frame repeat after 74 ms
#define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits
#define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits
#define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre)
#define KASEIKYO_COMMAND_LEN 12 // read 12 command bits (10 real command & 2 id)
#define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length
#define KASEIKYO_STOP_BIT 1 // has stop bit
#define KASEIKYO_LSB 1 // LSB...MSB?
#define KASEIKYO_FRAMES 2 // KASEIKYO sends 1st frame 2 times
#define KASEIKYO_FLAGS 0 // flags
#define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse
#define RECS80_START_BIT_PAUSE_TIME 7432.0e-6 // 7432 usec pause
#define RECS80_PULSE_TIME 158.0e-6 // 158 usec pulse
#define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause
#define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause
#define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
#define RECS80_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)
#define RECS80_ADDRESS_LEN 3 // read 3 address bits
#define RECS80_COMMAND_OFFSET 5 // skip 5 bits (2nd start + 1 toggle + 3 address)
#define RECS80_COMMAND_LEN 6 // read 6 command bits
#define RECS80_COMPLETE_DATA_LEN 11 // complete length
#define RECS80_STOP_BIT 1 // has stop bit
#define RECS80_LSB 0 // MSB...LSB
#define RECS80_FLAGS 0 // flags
#define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause
#define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
#define RC5_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)
#define RC5_ADDRESS_LEN 5 // read 5 address bits
#define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)
#define RC5_COMMAND_LEN 6 // read 6 command bits
#define RC5_COMPLETE_DATA_LEN 13 // complete length
#define RC5_STOP_BIT 0 // has no stop bit
#define RC5_LSB 0 // MSB...LSB
#define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags
#define DENON_PULSE_TIME 310.0e-6 // 310 usec pulse in practice, 275 in theory
#define DENON_1_PAUSE_TIME 1780.0e-6 // 1780 usec pause in practice, 1900 in theory
#define DENON_0_PAUSE_TIME 745.0e-6 // 745 usec pause in practice, 775 in theory
#define DENON_FRAMES 2 // DENON sends each frame 2 times
#define DENON_AUTO_REPETITION_PAUSE_TIME 65.0e-3 // inverted repetition after 65ms
#define DENON_FRAME_REPEAT_PAUSE_TIME 65.0e-3 // frame repeat after 65ms
#define DENON_ADDRESS_OFFSET 0 // skip 0 bits
#define DENON_ADDRESS_LEN 5 // read 5 address bits
#define DENON_COMMAND_OFFSET 5 // skip 5
#define DENON_COMMAND_LEN 10 // read 10 command bits
#define DENON_COMPLETE_DATA_LEN 15 // complete length
#define DENON_STOP_BIT 1 // has stop bit
#define DENON_LSB 0 // MSB...LSB
#define DENON_FLAGS 0 // flags
#define RC6_START_BIT_PULSE_TIME 2666.0e-6 // 2.666 msec pulse
#define RC6_START_BIT_PAUSE_TIME 889.0e-6 // 889 usec pause
#define RC6_TOGGLE_BIT_TIME 889.0e-6 // 889 msec pulse/pause
#define RC6_BIT_TIME 444.0e-6 // 889 usec pulse/pause
#define RC6_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
#define RC6_ADDRESS_OFFSET 5 // skip "1" + 3 mode bits + 1 toggle bit
#define RC6_ADDRESS_LEN 8 // read 8 address bits
#define RC6_COMMAND_OFFSET 13 // skip 12 bits ("1" + 3 mode + 1 toggle + 8 address)
#define RC6_COMMAND_LEN 8 // read 8 command bits
#define RC6_COMPLETE_DATA_LEN_SHORT 21 // complete length
#define RC6_COMPLETE_DATA_LEN_LONG 36 // complete length
#define RC6_STOP_BIT 0 // has no stop bit
#define RC6_LSB 0 // MSB...LSB
#define RC6_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
#define RECS80EXT_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse
#define RECS80EXT_START_BIT_PAUSE_TIME 3637.0e-6 // 3637 usec pause
#define RECS80EXT_PULSE_TIME 158.0e-6 // 158 usec pulse
#define RECS80EXT_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause
#define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause
#define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
#define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)
#define RECS80EXT_ADDRESS_LEN 4 // read 3 address bits
#define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address)
#define RECS80EXT_COMMAND_LEN 6 // read 6 command bits
#define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length
#define RECS80EXT_STOP_BIT 1 // has stop bit
#define RECS80EXT_LSB 0 // MSB...LSB
#define RECS80EXT_FLAGS 0 // flags
#define NUBERT_START_BIT_PULSE_TIME 1340.0e-6 // 1340 usec pulse
#define NUBERT_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause
#define NUBERT_1_PULSE_TIME 1340.0e-6 // 1340 usec pulse
#define NUBERT_1_PAUSE_TIME 340.0e-6 // 340 usec pause
#define NUBERT_0_PULSE_TIME 500.0e-6 // 500 usec pulse
#define NUBERT_0_PAUSE_TIME 1300.0e-6 // 1300 usec pause
#define NUBERT_FRAMES 2 // Nubert sends 2 frames
#define NUBERT_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
#define NUBERT_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms
#define NUBERT_ADDRESS_OFFSET 0 // skip 0 bits
#define NUBERT_ADDRESS_LEN 0 // read 0 address bits
#define NUBERT_COMMAND_OFFSET 0 // skip 0 bits
#define NUBERT_COMMAND_LEN 10 // read 10 bits
#define NUBERT_COMPLETE_DATA_LEN 10 // complete length
#define NUBERT_STOP_BIT 1 // has stop bit
#define NUBERT_LSB 0 // MSB?
#define NUBERT_FLAGS 0 // flags
#define BANG_OLUFSEN_START_BIT1_PULSE_TIME 200.0e-6 // 200 usec pulse
#define BANG_OLUFSEN_START_BIT1_PAUSE_TIME 3125.0e-6 // 3125 usec pause
#define BANG_OLUFSEN_START_BIT2_PULSE_TIME 200.0e-6 // 200 usec pulse
#define BANG_OLUFSEN_START_BIT2_PAUSE_TIME 3125.0e-6 // 3125 usec pause
#define BANG_OLUFSEN_START_BIT3_PULSE_TIME 200.0e-6 // 200 usec pulse
#define BANG_OLUFSEN_START_BIT3_PAUSE_TIME 15625.0e-6 // 15625 usec pause
#define BANG_OLUFSEN_START_BIT4_PULSE_TIME 200.0e-6 // 200 usec pulse
#define BANG_OLUFSEN_START_BIT4_PAUSE_TIME 3125.0e-6 // 3125 usec pause
#define BANG_OLUFSEN_PULSE_TIME 200.0e-6 // 200 usec pulse
#define BANG_OLUFSEN_1_PAUSE_TIME 9375.0e-6 // 9375 usec pause
#define BANG_OLUFSEN_0_PAUSE_TIME 3125.0e-6 // 3125 usec pause
#define BANG_OLUFSEN_R_PAUSE_TIME 6250.0e-6 // 6250 usec pause (repeat last bit)
#define BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME 12500.0e-6 // 12500 usec pause (trailer bit)
#define BANG_OLUFSEN_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
#define BANG_OLUFSEN_ADDRESS_OFFSET 0 // no address bits
#define BANG_OLUFSEN_ADDRESS_LEN 0 // no address bits
#define BANG_OLUFSEN_COMMAND_OFFSET 3 // skip startbits 2, 3, 4
#define BANG_OLUFSEN_COMMAND_LEN 16 // read 16 command bits
#define BANG_OLUFSEN_COMPLETE_DATA_LEN 20 // complete length: startbits 2, 3, 4 + 16 data bits + trailer bit
#define BANG_OLUFSEN_STOP_BIT 1 // has stop bit
#define BANG_OLUFSEN_LSB 0 // MSB...LSB
#define BANG_OLUFSEN_FLAGS 0 // flags
#define GRUNDIG_OR_NOKIA_BIT_TIME 528.0e-6 // 528 usec pulse/pause
#define GRUNDIG_OR_NOKIA_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit
#define GRUNDIG_OR_NOKIA_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms
#define GRUNDIG_OR_NOKIA_STOP_BIT 0 // has no stop bit
#define GRUNDIG_OR_NOKIA_LSB 1 // MSB...LSB
#define GRUNDIG_OR_NOKIA_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
#define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times
#define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms
#define GRUNDIG_ADDRESS_OFFSET 0 // no address
#define GRUNDIG_ADDRESS_LEN 0 // no address
#define GRUNDIG_COMMAND_OFFSET 1 // skip 1 start bit
#define GRUNDIG_COMMAND_LEN 9 // read 9 command bits
#define GRUNDIG_COMPLETE_DATA_LEN 10 // complete length: 1 start bit + 9 data bits
#define NOKIA_FRAMES 3 // NOKIA sends each frame 1 + 1 + 1 times
#define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms
#define NOKIA_ADDRESS_OFFSET 9 // skip 9 bits (1 start bit + 8 data bits)
#define NOKIA_ADDRESS_LEN 8 // 7 address bits
#define NOKIA_COMMAND_OFFSET 1 // skip 1 bit (1 start bit)
#define NOKIA_COMMAND_LEN 8 // read 8 command bits
#define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits
#define SIEMENS_BIT_TIME 250.0e-6 // 250 usec pulse/pause
#define SIEMENS_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
#define SIEMENS_ADDRESS_OFFSET 2 // skip 2 start bits
#define SIEMENS_ADDRESS_LEN 12 // read 12 address bits
#define SIEMENS_COMMAND_OFFSET 15 // skip 15 bits (2 start bits + 12 address bits + 1 inverted bit)
#define SIEMENS_COMMAND_LEN 8 // read 7 + 1 command bits, last bit is only check bit.
#define SIEMENS_COMPLETE_DATA_LEN 23 // complete length
#define SIEMENS_STOP_BIT 0 // has no stop bit
#define SIEMENS_LSB 0 // MSB...LSB
#define SIEMENS_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
#define FDC_START_BIT_PULSE_TIME 2085.0e-6 // 2085 usec pulse
#define FDC_START_BIT_PAUSE_TIME 966.0e-6 // 966 usec pause
#define FDC_PULSE_TIME 300.0e-6 // 300 usec pulse
#define FDC_1_PAUSE_TIME 715.0e-6 // 715 usec pause
#define FDC_0_PAUSE_TIME 220.0e-6 // 220 usec pause
#define FDC_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
#define FDC_ADDRESS_OFFSET 0 // skip 0 bits
#define FDC_ADDRESS_LEN 14 // read 14 address bits, but use only 6, shift 8 into command
#define FDC_COMMAND_OFFSET 20 // skip 20 bits
#define FDC_COMMAND_LEN 12 // read 12 bits
#define FDC_COMPLETE_DATA_LEN 40 // complete length
#define FDC_STOP_BIT 1 // has stop bit
#define FDC_LSB 1 // LSB...MSB
#define FDC_FLAGS 0 // flags
#define RCCAR_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse
#define RCCAR_START_BIT_PAUSE_TIME 2000.0e-6 // 2000 usec pause
#define RCCAR_PULSE_TIME 600.0e-6 // 360 usec pulse
#define RCCAR_1_PAUSE_TIME 450.0e-6 // 650 usec pause
#define RCCAR_0_PAUSE_TIME 900.0e-6 // 180 usec pause
#define RCCAR_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
#define RCCAR_ADDRESS_OFFSET 0 // skip 0 bits
#define RCCAR_ADDRESS_LEN 0 // read 0 address bits
#define RCCAR_COMMAND_OFFSET 0 // skip 0 bits
#define RCCAR_COMMAND_LEN 13 // read 13 bits
#define RCCAR_COMPLETE_DATA_LEN 13 // complete length
#define RCCAR_STOP_BIT 1 // has stop bit
#define RCCAR_LSB 1 // LSB...MSB
#define RCCAR_FLAGS 0 // flags
#define JVC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse
#define JVC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
#define JVC_PULSE_TIME 560.0e-6 // 560 usec pulse
#define JVC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause
#define JVC_0_PAUSE_TIME 560.0e-6 // 560 usec pause
#define JVC_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms
#define JVC_ADDRESS_OFFSET 0 // skip 0 bits
#define JVC_ADDRESS_LEN 4 // read 4 address bits
#define JVC_COMMAND_OFFSET 4 // skip 4 bits
#define JVC_COMMAND_LEN 12 // read 12 bits
#define JVC_COMPLETE_DATA_LEN 16 // complete length
#define JVC_STOP_BIT 1 // has stop bit
#define JVC_LSB 1 // LSB...MSB
#define JVC_FLAGS 0 // flags
#define NIKON_START_BIT_PULSE_TIME 2200.0e-6 // 2200 usec pulse
#define NIKON_START_BIT_PAUSE_TIME 27100.0e-6 // 27100 usec pause
#define NIKON_PULSE_TIME 500.0e-6 // 520 usec pulse
#define NIKON_1_PAUSE_TIME 3500.0e-6 // 3500 usec pause
#define NIKON_0_PAUSE_TIME 1500.0e-6 // 1500 usec pause
#define NIKON_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
#define NIKON_ADDRESS_OFFSET 0 // skip 0 bits
#define NIKON_ADDRESS_LEN 0 // read 0 address bits
#define NIKON_COMMAND_OFFSET 0 // skip 0 bits
#define NIKON_COMMAND_LEN 2 // read 2 bits
#define NIKON_COMPLETE_DATA_LEN 2 // complete length
#define NIKON_STOP_BIT 1 // has stop bit
#define NIKON_LSB 0 // LSB...MSB
#define NIKON_FLAGS 0 // flags
#define AUTO_FRAME_REPETITION_TIME 80.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms
// KASEIKYO: automatic repetition after 75ms
#define TRUE 1
#define FALSE 0
#define IRMP_FLAG_REPETITION 0x01
typedef struct
{
uint8_t protocol; // protocol, i.e. NEC_PROTOCOL
uint16_t address; // address
uint16_t command; // command
uint8_t flags; // flags, e.g. repetition
} IRMP_DATA;
/**
* Initialize IRMP decoder
* @details Configures IRMP input pin
*/
extern void irmp_init (void);
/**
* Get IRMP data
* @details gets decoded IRMP data
* @param pointer in order to store IRMP data
* @return TRUE: successful, FALSE: failed
*/
extern uint8_t irmp_get_data (IRMP_DATA *);
/**
* ISR routine
* @details ISR routine, called 10000 times per second
*/
extern uint8_t irmp_ISR (void);
#ifdef __cplusplus
}
#endif
#endif /* _WC_IRMP_H_ */