Rev 801 |
Blame |
Compare with Previous |
Last modification |
View Log
| RSS feed
/***************************************************************************
* Copyright (C) 2009 by Manuel Schrape *
* manuel.schrape@gmx.de *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
#ifndef MK_DATATYPES_H
#define MK_DATATYPES_H
#include <stdint.h>
#ifdef _BETA_
static const int MK_VERSION_SETTINGS = 85; // wird angepasst, wenn sich die EEPROM-Daten ge�ndert haben
#else
static const int MK_VERSION_SETTINGS = 85; // wird angepasst, wenn sich die EEPROM-Daten ge�ndert haben
#endif
static const int MK_VERSION_NAVI = 4; // wird angepasst, wenn sich die Navi-Daten ge�ndert haben
static const int MK_VERSION_MIXER = 1; // wird angepasst, wenn sich die Mixer-Daten ge�ndert haben
static const int MK_MAX_MOTOR = 16; // Maximale Anzahl der Motoren im Mixer
// Version des Seriellen Protokoll
static const int VERSION_SERIAL_MAJOR = 11;
static const int VERSION_SERIAL_MINOR = 0;
// Basis-Addressen der verschiedenen Hardware
static const int ADDRESS_ALL = 0;
static const int ADDRESS_FC = 1;
static const int ADDRESS_NC = 2;
static const int ADDRESS_MK3MAG = 3;
static const int ADDRESS_BLC = 5;
#define FCFLAG_MOTOR_RUN 0x01
#define FCFLAG_FLY 0x02
#define FCFLAG_CALIBRATE 0x04
#define FCFLAG_START 0x08
#define FCFLAG_NOTLANDUNG 0x10
#define FCFLAG_LOWBAT 0x20
#define FCFLAG_SPI_RX_ERR 0x40
#define FCFLAG_I2CERR 0x80
#define DEFEKT_G_NICK 0x01
#define DEFEKT_G_ROLL 0x02
#define DEFEKT_G_GIER 0x04
#define DEFEKT_A_NICK 0x08
#define DEFEKT_A_ROLL 0x10
#define DEFEKT_A_Z 0x20
#define DEFEKT_PRESSURE 0x40
#define DEFEKT_CAREFREE_ERR 0x80
#define DEFEKT_I2C 0x01
#define DEFEKT_BL_MISSING 0x02
#define DEFEKT_SPI_RX_ERR 0x04
#define DEFEKT_PPM_ERR 0x08
#define DEFEKT_MIXER_ERR 0x10
#define CFG_HOEHENREGELUNG 0x01
#define CFG_HOEHEN_SCHALTER 0x02
#define CFG_HEADING_HOLD 0x04
#define CFG_KOMPASS_AKTIV 0x08
#define CFG_KOMPASS_FIX 0x10
#define CFG_GPS_AKTIV 0x20
#define CFG_ACHSENKOPPLUNG_AKTIV 0x40
#define CFG_DREHRATEN_BEGRENZER 0x80
#define CFG_LOOP_OBEN 0x01
#define CFG_LOOP_UNTEN 0x02
#define CFG_LOOP_LINKS 0x04
#define CFG_LOOP_RECHTS 0x08
#define CFG_MOTOR_BLINK 0x10
#define CFG_MOTOR_OFF_LED1 0x20
#define CFG_MOTOR_OFF_LED2 0x40
#define CFG_RES4 0x80
#define CFG2_HEIGHT_LIMIT 0x01
#define CFG2_VARIO_BEEP 0x02
#define CFG_SENSITIVE_RC 0x04
#define CFG_3_3V_REFERENCE 0x08
#define CFG0_AIRPRESS_SENSOR 0x01
#define CFG0_HEIGHT_SWITCH 0x02
#define CFG0_HEADING_HOLD 0x04
#define CFG0_COMPASS_ACTIVE 0x08
#define CFG0_COMPASS_FIX 0x10
#define CFG0_GPS_ACTIVE 0x20
#define CFG0_AXIS_COUPLING_ACTIVE 0x40
#define CFG0_ROTARY_RATE_LIMITER 0x80
// defines for the receiver selection
#define RECEIVER_PPM 0
#define RECEIVER_SPEKTRUM 1
#define RECEIVER_SPEKTRUM_HI_RES 2
#define RECEIVER_SPEKTRUM_LOW_RES 3
#define RECEIVER_JETI 4
#define RECEIVER_ACT_DSL 5
#define RECEIVER_UNKNOWN 0xFF
struct s_MK_VersionInfo
{
unsigned char SWMajor;
unsigned char SWMinor;
unsigned char ProtoMajor;
unsigned char ProtoMinor;
unsigned char SWPatch;
unsigned char HardwareError[5];
};
struct s_MK_Debug
{
unsigned char Digital[2];
int16_t Analog[32]; // Debugwerte
};
struct s_MK_DebugLabels
{
int Position;
QString Text;
};
//typedef int16_t s_MK_PPM_Data[26];
struct s_MK_PPM_Data
{
int16_t Data[26];
};
struct s_MK_Settings
{
// Die ersten beiden Bytes nicht an den MK senden.
unsigned char Index;
unsigned char Revision;
unsigned char Kanalbelegung[12]; // GAS[0], GIER[1],NICK[2], ROLL[3], POTI1, POTI2, POTI3
unsigned char GlobalConfig; // 0x01=Höhenregler aktiv,0x02=Kompass aktiv, 0x04=GPS aktiv, 0x08=Heading Hold aktiv
unsigned char Hoehe_MinGas; // Wert : 0-100
unsigned char Luftdruck_D; // Wert : 0-250
unsigned char MaxHoehe; // Wert : 0-32
unsigned char Hoehe_P; // Wert : 0-32
unsigned char Hoehe_Verstaerkung; // Wert : 0-50
unsigned char Hoehe_ACC_Wirkung; // Wert : 0-250
unsigned char Hoehe_HoverBand; // Wert : 0-250
unsigned char Hoehe_GPS_Z; // Wert : 0-250
unsigned char Hoehe_StickNeutralPoint;// Wert : 0-250
unsigned char Stick_P; // Wert : 1-6
unsigned char Stick_D; // Wert : 0-64
unsigned char Gier_P; // Wert : 1-20
unsigned char Gas_Min; // Wert : 0-32
unsigned char Gas_Max; // Wert : 33-250
unsigned char GyroAccFaktor; // Wert : 1-64
unsigned char KompassWirkung; // Wert : 0-32
unsigned char Gyro_P; // Wert : 10-250
unsigned char Gyro_I; // Wert : 0-250
unsigned char Gyro_D; // Wert : 0-250
unsigned char Gyro_Gier_P; // Wert : 10-250
unsigned char Gyro_Gier_I; // Wert : 0-250
unsigned char Gyro_Stability; // Wert : 0-16
unsigned char UnterspannungsWarnung; // Wert : 0-250
unsigned char NotGas; // Wert : 0-250 //Gaswert bei Empängsverlust
unsigned char NotGasZeit; // Wert : 0-250 // Zeitbis auf NotGas geschaltet wird, wg. Rx-Problemen
unsigned char Receiver; // 0= Summensignal, 1= Spektrum, 2 =Jeti, 3=ACT DSL, 4=ACT S3D
unsigned char I_Faktor; // Wert : 0-250
unsigned char UserParam1; // Wert : 0-250
unsigned char UserParam2; // Wert : 0-250
unsigned char UserParam3; // Wert : 0-250
unsigned char UserParam4; // Wert : 0-250
unsigned char ServoNickControl; // Wert : 0-250 // Stellung des Servos
unsigned char ServoNickComp; // Wert : 0-250 // Einfluss Gyro/Servo
unsigned char ServoNickMin; // Wert : 0-250 // Anschlag
unsigned char ServoNickMax; // Wert : 0-250 // Anschlag
//--- Seit V0.75
unsigned char ServoRollControl; // Wert : 0-250 // Stellung des Servos
unsigned char ServoRollComp; // Wert : 0-250
unsigned char ServoRollMin; // Wert : 0-250
unsigned char ServoRollMax; // Wert : 0-250
//---
unsigned char ServoNickRefresh; // Speed of the Servo
unsigned char ServoManualControlSpeed;//
unsigned char CamOrientation; //
unsigned char Servo3; // Value or mapping of the Servo Output
unsigned char Servo4; // Value or mapping of the Servo Output
unsigned char Servo5; // Value or mapping of the Servo Output
unsigned char LoopGasLimit; // Wert: 0-250 max. Gas während Looping
unsigned char LoopThreshold; // Wert: 0-250 Schwelle für Stickausschlag
unsigned char LoopHysterese; // Wert: 0-250 Hysterese für Stickausschlag
unsigned char AchsKopplung1; // Wert: 0-250 Faktor, mit dem Gier die Achsen Roll und Nick koppelt (NickRollMitkopplung)
unsigned char AchsKopplung2; // Wert: 0-250 Faktor, mit dem Nick und Roll verkoppelt werden
unsigned char CouplingYawCorrection; // Wert: 0-250 Faktor, mit dem Nick und Roll verkoppelt werden
unsigned char WinkelUmschlagNick; // Wert: 0-250 180°-Punkt
unsigned char WinkelUmschlagRoll; // Wert: 0-250 180°-Punkt
unsigned char GyroAccAbgleich; // 1/k (Koppel_ACC_Wirkung)
unsigned char Driftkomp;
unsigned char DynamicStability;
unsigned char UserParam5; // Wert : 0-250
unsigned char UserParam6; // Wert : 0-250
unsigned char UserParam7; // Wert : 0-250
unsigned char UserParam8; // Wert : 0-250
//---Output ---------------------------------------------
unsigned char J16Bitmask; // for the J16 Output
unsigned char J16Timing; // for the J16 Output
unsigned char J17Bitmask; // for the J17 Output
unsigned char J17Timing; // for the J17 Output
// seit version V0.75c
unsigned char WARN_J16_Bitmask; // for the J16 Output
unsigned char WARN_J17_Bitmask; // for the J17 Output
//---NaviCtrl---------------------------------------------
unsigned char NaviGpsModeControl; // Parameters for the Naviboard
unsigned char NaviGpsGain;
unsigned char NaviGpsP;
unsigned char NaviGpsI;
unsigned char NaviGpsD;
unsigned char NaviGpsPLimit;
unsigned char NaviGpsILimit;
unsigned char NaviGpsDLimit;
unsigned char NaviGpsACC;
unsigned char NaviGpsMinSat;
unsigned char NaviStickThreshold;
unsigned char NaviWindCorrection;
unsigned char NaviSpeedCompensation;
unsigned char NaviOperatingRadius;
unsigned char NaviAngleLimitation;
unsigned char NaviPH_LoginTime;
//---Ext.Ctrl---------------------------------------------
unsigned char ExternalControl; // for serial Control
//---CareFree---------------------------------------------
unsigned char OrientationAngle; // Where is the front-direction?
unsigned char OrientationModeControl; // switch for CareFree
unsigned char MotorSafetySwitch;
//------------------------------------------------
unsigned char BitConfig; // (war Loop-Cfg) Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt
unsigned char ServoCompInvert; // // 0x01 = Nick, 0x02 = Roll 0 oder 1 // WICHTIG!!! am Ende lassen
unsigned char ExtraConfig; // bitcodiert
char Name[12];
unsigned char crc; // must be the last byte!
};
struct s_MK_Mixer
{
uint8_t Revision;
char Name[12];
int8_t Motor[16][4];
uint8_t crc;
};
///////////////
// Navi-Ctrl //
///////////////
#define INVALID 0x00
#define NEWDATA 0x01
#define PROCESSED 0x02
#define NC_FLAG_FREE 0x01
#define NC_FLAG_PH 0x02
#define NC_FLAG_CH 0x04
#define NC_FLAG_RANGE_LIMIT 0x08
#define NC_FLAG_NOSERIALLINK 0x10
#define NC_FLAG_TARGET_REACHED 0x20
#define NC_FLAG_MANUAL_CONTROL 0x40
#define NC_FLAG_8 0x80
#define POINT_TYPE_WP 0
#define POINT_TYPE_POI 1
typedef struct
{
int32_t Longitude; // in 1E-7 deg
int32_t Latitude; // in 1E-7 deg
int32_t Altitude; // in mm
uint8_t Status; // validity of data
} __attribute__((packed)) GPS_Pos_t;
typedef struct
{
uint16_t Distance; // distance to target in dm
int16_t Bearing; // course to target in deg
} __attribute__((packed)) GPS_PosDev_t;
typedef struct
{
uint8_t Version; // version of the data structure
GPS_Pos_t CurrentPosition; // see ubx.h for details
GPS_Pos_t TargetPosition;
GPS_PosDev_t TargetPositionDeviation;
GPS_Pos_t HomePosition;
GPS_PosDev_t HomePositionDeviation;
uint8_t WaypointIndex; // index of current waypoints running from 0 to WaypointNumber-1
uint8_t WaypointNumber; // number of stored waypoints
uint8_t SatsInUse; // number of satellites used for position solution
int16_t Altimeter; // hight according to air pressure
int16_t Variometer; // climb(+) and sink(-) rate
uint16_t FlyingTime; // in seconds
uint8_t UBat; // Battery Voltage in 0.1 Volts
uint16_t GroundSpeed; // speed over ground in cm/s (2D)
int16_t Heading; // current flight direction in ° as angle to north
int16_t CompassHeading; // current compass value in °
int8_t AngleNick; // current Nick angle in 1°
int8_t AngleRoll; // current Rick angle in 1°
uint8_t RC_Quality; // RC_Quality
uint8_t FCFlags; // Flags from FC
uint8_t NCFlags; // Flags from NC
uint8_t Errorcode; // 0 --> okay
uint8_t OperatingRadius; // current operation radius around the Home Position in m
int16_t TopSpeed; // velocity in vertical direction in cm/s
uint8_t TargetHoldTime; // time in s to stay at the given target, counts down to 0 if target has been reached
uint8_t RC_RSSI; // Receiver signal strength (since version 2 added)
int16_t SetpointAltitude; // setpoint for altitude
uint8_t Gas; // for future use
uint16_t Current; // actual current in 0.1A steps
uint16_t UsedCapacity; // used capacity in mAh
} __attribute__((packed)) s_MK_NaviData;
typedef struct
{
GPS_Pos_t Position; // the gps position of the waypoint, see ubx.h for details
int16_t Heading; // orientation, future implementation
uint8_t ToleranceRadius; // in meters, if the MK is within that range around the target, then the next target is triggered
uint8_t HoldTime; // in seconds, if the was once in the tolerance area around a WP, this time defies the delay before the next WP is triggered
uint8_t Event_Flag; // future emplementation
uint8_t Index; // to indentify different waypoints, workaround for bad communications PC <-> NC
uint8_t Type; // type of Waypoint
uint8_t reserve[11]; // reserve
} __attribute__((packed)) s_MK_WayPoint;
#endif // MK_DATATYPES_H