Go to most recent revision |
Blame |
Compare with Previous |
Last modification |
View Log
| RSS feed
/*!
\class Win_QextSerialPort
\version 1.0.0
\author Stefan Sander
A cross-platform serial port class.
This class encapsulates the Windows portion of QextSerialPort. The user will be notified of
errors and possible portability conflicts at run-time by default - this behavior can be turned
off by defining _TTY_NOWARN_ (to turn off all warnings) or _TTY_NOWARN_PORT_ (to turn off
portability warnings) in the project. Note that defining _TTY_NOWARN_ also defines
_TTY_NOWARN_PORT_.
\note
On Windows NT/2000/XP this class uses Win32 serial port functions by default. The user may
select POSIX behavior under NT, 2000, or XP ONLY by defining _TTY_POSIX_ in the project. I can
make no guarantees as to the quality of POSIX support under NT/2000 however.
*/
#include <stdio.h>
#include "win_qextserialport.h"
/*!
\fn Win_QextSerialPort::Win_QextSerialPort()
Default constructor. Note that the name of the device used by a Win_QextSerialPort constructed
with this constructor will be determined by #defined constants, or lack thereof - the default
behavior is the same as _TTY_LINUX_. Possible naming conventions and their associated constants
are:
\verbatim
Constant Used By Naming Convention
---------- ------------- ------------------------
_TTY_WIN_ Windows COM1, COM2
_TTY_IRIX_ SGI/IRIX /dev/ttyf1, /dev/ttyf2
_TTY_HPUX_ HP-UX /dev/tty1p0, /dev/tty2p0
_TTY_SUN_ SunOS/Solaris /dev/ttya, /dev/ttyb
_TTY_DIGITAL_ Digital UNIX /dev/tty01, /dev/tty02
_TTY_FREEBSD_ FreeBSD /dev/ttyd0, /dev/ttyd1
_TTY_LINUX_ Linux /dev/ttyS0, /dev/ttyS1
<none> Linux /dev/ttyS0, /dev/ttyS1
\endverbatim
This constructor associates the object with the first port on the system, e.g. COM1 for Windows
platforms. See the other constructor if you need a port other than the first.
*/
Win_QextSerialPort::Win_QextSerialPort():QextSerialBase() {
Win_Handle=INVALID_HANDLE_VALUE;
}
/*!Win_QextSerialPort::Win_QextSerialPort(const Win_QextSerialPort&)
Copy constructor.
*/
Win_QextSerialPort::Win_QextSerialPort(const Win_QextSerialPort& s):QextSerialBase(s.port) {
Win_Handle=INVALID_HANDLE_VALUE;
setOpenMode(s.openMode());
lastErr=s.lastErr;
port = s.port;
Settings.FlowControl=s.Settings.FlowControl;
Settings.Parity=s.Settings.Parity;
Settings.DataBits=s.Settings.DataBits;
Settings.StopBits=s.Settings.StopBits;
Settings.BaudRate=s.Settings.BaudRate;
Win_Handle=s.Win_Handle;
memcpy(&Win_CommConfig, &s.Win_CommConfig, sizeof(COMMCONFIG));
memcpy(&Win_CommTimeouts, &s.Win_CommTimeouts, sizeof(COMMTIMEOUTS));
}
/*!
\fn Win_QextSerialPort::Win_QextSerialPort(const QString & name)
Constructs a serial port attached to the port specified by devName.
devName is the name of the device, which is windowsystem-specific,
e.g."COM2" or "/dev/ttyS0".
*/
Win_QextSerialPort::Win_QextSerialPort(const QString & name):QextSerialBase(name) {
Win_Handle=INVALID_HANDLE_VALUE;
}
/*!
\fn Win_QextSerialPort::Win_QextSerialPort(const PortSettings& settings)
Constructs a port with default name and specified settings.
*/
Win_QextSerialPort::Win_QextSerialPort(const PortSettings& settings) {
Win_Handle=INVALID_HANDLE_VALUE;
setBaudRate(settings.BaudRate);
setDataBits(settings.DataBits);
setStopBits(settings.StopBits);
setParity(settings.Parity);
setFlowControl(settings.FlowControl);
setTimeout(settings.Timeout_Sec, settings.Timeout_Millisec);
}
/*!
\fn Win_QextSerialPort::Win_QextSerialPort(const QString & name, const PortSettings& settings)
Constructs a port with specified name and settings.
*/
Win_QextSerialPort::Win_QextSerialPort(const QString & name, const PortSettings& settings) {
Win_Handle=INVALID_HANDLE_VALUE;
setPortName(name);
setBaudRate(settings.BaudRate);
setDataBits(settings.DataBits);
setStopBits(settings.StopBits);
setParity(settings.Parity);
setFlowControl(settings.FlowControl);
setTimeout(settings.Timeout_Sec, settings.Timeout_Millisec);
}
/*!
\fn Win_QextSerialPort::~Win_QextSerialPort()
Standard destructor.
*/
Win_QextSerialPort::~Win_QextSerialPort() {
if (isOpen()) {
close();
}
}
/*!
\fn Win_QextSerialPort& Win_QextSerialPort::operator=(const Win_QextSerialPort& s)
overrides the = operator
*/
Win_QextSerialPort& Win_QextSerialPort::operator=(const Win_QextSerialPort& s) {
setOpenMode(s.openMode());
lastErr=s.lastErr;
port = s.port;
Settings.FlowControl=s.Settings.FlowControl;
Settings.Parity=s.Settings.Parity;
Settings.DataBits=s.Settings.DataBits;
Settings.StopBits=s.Settings.StopBits;
Settings.BaudRate=s.Settings.BaudRate;
Win_Handle=s.Win_Handle;
memcpy(&Win_CommConfig, &s.Win_CommConfig, sizeof(COMMCONFIG));
memcpy(&Win_CommTimeouts, &s.Win_CommTimeouts, sizeof(COMMTIMEOUTS));
return *this;
}
/*!
\fn bool Win_QextSerialPort::open(OpenMode mode)
Opens a serial port. Note that this function does not specify which device to open. If you need
to open a device by name, see Win_QextSerialPort::open(const char*). This function has no effect
if the port associated with the class is already open. The port is also configured to the current
settings, as stored in the Settings structure.
*/
bool Win_QextSerialPort::open(OpenMode mode) {
unsigned long confSize = sizeof(COMMCONFIG);
Win_CommConfig.dwSize = confSize;
LOCK_MUTEX();
if (mode == QIODevice::NotOpen)
return isOpen();
if (!isOpen()) {
/*open the port*/
Win_Handle=CreateFileA(port.toAscii(), GENERIC_READ|GENERIC_WRITE,
FILE_SHARE_READ|FILE_SHARE_WRITE, NULL, OPEN_EXISTING, 0, NULL);
if (Win_Handle!=INVALID_HANDLE_VALUE) {
/*set open mode*/
QIODevice::open(mode);
/*configure port settings*/
GetCommConfig(Win_Handle, &Win_CommConfig, &confSize);
GetCommState(Win_Handle, &(Win_CommConfig.dcb));
/*set up parameters*/
Win_CommConfig.dcb.fBinary=TRUE;
Win_CommConfig.dcb.fInX=FALSE;
Win_CommConfig.dcb.fOutX=FALSE;
Win_CommConfig.dcb.fAbortOnError=FALSE;
Win_CommConfig.dcb.fNull=FALSE;
setBaudRate(Settings.BaudRate);
setDataBits(Settings.DataBits);
setStopBits(Settings.StopBits);
setParity(Settings.Parity);
setFlowControl(Settings.FlowControl);
setTimeout(Settings.Timeout_Sec, Settings.Timeout_Millisec);
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
}
UNLOCK_MUTEX();
return isOpen();
}
/*!
\fn void Win_QextSerialPort::close()
Closes a serial port. This function has no effect if the serial port associated with the class
is not currently open.
*/
void Win_QextSerialPort::close() {
LOCK_MUTEX();
CloseHandle(Win_Handle);
QIODevice::close();
UNLOCK_MUTEX();
}
/*!
\fn void Win_QextSerialPort::flush()
Flushes all pending I/O to the serial port. This function has no effect if the serial port
associated with the class is not currently open.
*/
void Win_QextSerialPort::flush() {
LOCK_MUTEX();
if (isOpen()) {
FlushFileBuffers(Win_Handle);
}
UNLOCK_MUTEX();
}
/*!
\fn qint64 Win_QextSerialPort::size() const
This function will return the number of bytes waiting in the receive queue of the serial port.
It is included primarily to provide a complete QIODevice interface, and will not record errors
in the lastErr member (because it is const). This function is also not thread-safe - in
multithreading situations, use Win_QextSerialPort::bytesAvailable() instead.
*/
qint64 Win_QextSerialPort::size() const {
int availBytes;
COMSTAT Win_ComStat;
DWORD Win_ErrorMask=0;
ClearCommError(Win_Handle, &Win_ErrorMask, &Win_ComStat);
availBytes = Win_ComStat.cbInQue;
return (qint64)availBytes;
}
/*!
\fn qint64 Win_QextSerialPort::bytesAvailable()
Returns the number of bytes waiting in the port's receive queue. This function will return 0 if
the port is not currently open, or -1 on error. Error information can be retrieved by calling
Win_QextSerialPort::getLastError().
*/
qint64 Win_QextSerialPort::bytesAvailable() {
LOCK_MUTEX();
if (isOpen()) {
DWORD Errors;
COMSTAT Status;
bool success=ClearCommError(Win_Handle, &Errors, &Status);
translateError(Errors);
if (success) {
lastErr=E_NO_ERROR;
UNLOCK_MUTEX();
return Status.cbInQue + QIODevice::bytesAvailable();
}
UNLOCK_MUTEX();
return (unsigned int)-1;
}
UNLOCK_MUTEX();
return 0;
}
/*!
\fn void Win_QextSerialPort::translateError(ulong error)
Translates a system-specific error code to a QextSerialPort error code. Used internally.
*/
void Win_QextSerialPort::translateError(ulong error) {
if (error&CE_BREAK) {
lastErr=E_BREAK_CONDITION;
}
else if (error&CE_FRAME) {
lastErr=E_FRAMING_ERROR;
}
else if (error&CE_IOE) {
lastErr=E_IO_ERROR;
}
else if (error&CE_MODE) {
lastErr=E_INVALID_FD;
}
else if (error&CE_OVERRUN) {
lastErr=E_BUFFER_OVERRUN;
}
else if (error&CE_RXPARITY) {
lastErr=E_RECEIVE_PARITY_ERROR;
}
else if (error&CE_RXOVER) {
lastErr=E_RECEIVE_OVERFLOW;
}
else if (error&CE_TXFULL) {
lastErr=E_TRANSMIT_OVERFLOW;
}
}
/*!
\fn qint64 Win_QextSerialPort::readData(char *data, qint64 maxSize)
Reads a block of data from the serial port. This function will read at most maxlen bytes from
the serial port and place them in the buffer pointed to by data. Return value is the number of
bytes actually read, or -1 on error.
\warning before calling this function ensure that serial port associated with this class
is currently open (use isOpen() function to check if port is open).
*/
qint64 Win_QextSerialPort::readData(char *data, qint64 maxSize)
{
LOCK_MUTEX();
int retVal=0;
COMSTAT Win_ComStat;
DWORD Win_BytesRead=0;
DWORD Win_ErrorMask=0;
ClearCommError(Win_Handle, &Win_ErrorMask, &Win_ComStat);
if (Win_ComStat.cbInQue &&
(!ReadFile(Win_Handle, (void*)data, (DWORD)maxSize, &Win_BytesRead, NULL)
|| Win_BytesRead==0)) {
lastErr=E_READ_FAILED;
retVal=-1;
}
else {
retVal=((int)Win_BytesRead);
}
UNLOCK_MUTEX();
return retVal;
}
/*!
\fn qint64 Win_QextSerialPort::writeData(const char *data, qint64 maxSize)
Writes a block of data to the serial port. This function will write len bytes
from the buffer pointed to by data to the serial port. Return value is the number
of bytes actually written, or -1 on error.
\warning before calling this function ensure that serial port associated with this class
is currently open (use isOpen() function to check if port is open).
*/
qint64 Win_QextSerialPort::writeData(const char *data, qint64 maxSize)
{
LOCK_MUTEX();
int retVal=0;
DWORD Win_BytesWritten;
if (!WriteFile(Win_Handle, (void*)data, (DWORD)maxSize, &Win_BytesWritten, NULL)) {
lastErr=E_WRITE_FAILED;
retVal=-1;
}
else {
retVal=((int)Win_BytesWritten);
}
UNLOCK_MUTEX();
flush();
return retVal;
}
/*!
\fn void Win_QextSerialPort::ungetChar(char c)
This function is included to implement the full QIODevice interface, and currently has no
purpose within this class. This function is meaningless on an unbuffered device and currently
only prints a warning message to that effect.
*/
void Win_QextSerialPort::ungetChar(char c) {
/*meaningless on unbuffered sequential device - return error and print a warning*/
TTY_WARNING("Win_QextSerialPort: ungetChar() called on an unbuffered sequential device - operation is meaningless");
}
/*!
\fn void Win_QextSerialPort::setFlowControl(FlowType flow)
Sets the flow control used by the port. Possible values of flow are:
\verbatim
FLOW_OFF No flow control
FLOW_HARDWARE Hardware (RTS/CTS) flow control
FLOW_XONXOFF Software (XON/XOFF) flow control
\endverbatim
*/
void Win_QextSerialPort::setFlowControl(FlowType flow) {
LOCK_MUTEX();
if (Settings.FlowControl!=flow) {
Settings.FlowControl=flow;
}
if (isOpen()) {
switch(flow) {
/*no flow control*/
case FLOW_OFF:
Win_CommConfig.dcb.fOutxCtsFlow=FALSE;
Win_CommConfig.dcb.fRtsControl=RTS_CONTROL_DISABLE;
Win_CommConfig.dcb.fInX=FALSE;
Win_CommConfig.dcb.fOutX=FALSE;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
break;
/*software (XON/XOFF) flow control*/
case FLOW_XONXOFF:
Win_CommConfig.dcb.fOutxCtsFlow=FALSE;
Win_CommConfig.dcb.fRtsControl=RTS_CONTROL_DISABLE;
Win_CommConfig.dcb.fInX=TRUE;
Win_CommConfig.dcb.fOutX=TRUE;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
break;
case FLOW_HARDWARE:
Win_CommConfig.dcb.fOutxCtsFlow=TRUE;
Win_CommConfig.dcb.fRtsControl=RTS_CONTROL_HANDSHAKE;
Win_CommConfig.dcb.fInX=FALSE;
Win_CommConfig.dcb.fOutX=FALSE;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
break;
}
}
UNLOCK_MUTEX();
}
/*!
\fn void Win_QextSerialPort::setParity(ParityType parity)
Sets the parity associated with the serial port. The possible values of parity are:
\verbatim
PAR_SPACE Space Parity
PAR_MARK Mark Parity
PAR_NONE No Parity
PAR_EVEN Even Parity
PAR_ODD Odd Parity
\endverbatim
*/
void Win_QextSerialPort::setParity(ParityType parity) {
LOCK_MUTEX();
if (Settings.Parity!=parity) {
Settings.Parity=parity;
}
if (isOpen()) {
Win_CommConfig.dcb.Parity=(unsigned char)parity;
switch (parity) {
/*space parity*/
case PAR_SPACE:
if (Settings.DataBits==DATA_8) {
TTY_PORTABILITY_WARNING("Win_QextSerialPort Portability Warning: Space parity with 8 data bits is not supported by POSIX systems.");
}
Win_CommConfig.dcb.fParity=TRUE;
break;
/*mark parity - WINDOWS ONLY*/
case PAR_MARK:
TTY_PORTABILITY_WARNING("Win_QextSerialPort Portability Warning: Mark parity is not supported by POSIX systems");
Win_CommConfig.dcb.fParity=TRUE;
break;
/*no parity*/
case PAR_NONE:
Win_CommConfig.dcb.fParity=FALSE;
break;
/*even parity*/
case PAR_EVEN:
Win_CommConfig.dcb.fParity=TRUE;
break;
/*odd parity*/
case PAR_ODD:
Win_CommConfig.dcb.fParity=TRUE;
break;
}
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
UNLOCK_MUTEX();
}
/*!
\fn void Win_QextSerialPort::setDataBits(DataBitsType dataBits)
Sets the number of data bits used by the serial port. Possible values of dataBits are:
\verbatim
DATA_5 5 data bits
DATA_6 6 data bits
DATA_7 7 data bits
DATA_8 8 data bits
\endverbatim
\note
This function is subject to the following restrictions:
\par
5 data bits cannot be used with 2 stop bits.
\par
1.5 stop bits can only be used with 5 data bits.
\par
8 data bits cannot be used with space parity on POSIX systems.
*/
void Win_QextSerialPort::setDataBits(DataBitsType dataBits) {
LOCK_MUTEX();
if (Settings.DataBits!=dataBits) {
if ((Settings.StopBits==STOP_2 && dataBits==DATA_5) ||
(Settings.StopBits==STOP_1_5 && dataBits!=DATA_5)) {
}
else {
Settings.DataBits=dataBits;
}
}
if (isOpen()) {
switch(dataBits) {
/*5 data bits*/
case DATA_5:
if (Settings.StopBits==STOP_2) {
TTY_WARNING("Win_QextSerialPort: 5 Data bits cannot be used with 2 stop bits.");
}
else {
Win_CommConfig.dcb.ByteSize=5;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
break;
/*6 data bits*/
case DATA_6:
if (Settings.StopBits==STOP_1_5) {
TTY_WARNING("Win_QextSerialPort: 6 Data bits cannot be used with 1.5 stop bits.");
}
else {
Win_CommConfig.dcb.ByteSize=6;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
break;
/*7 data bits*/
case DATA_7:
if (Settings.StopBits==STOP_1_5) {
TTY_WARNING("Win_QextSerialPort: 7 Data bits cannot be used with 1.5 stop bits.");
}
else {
Win_CommConfig.dcb.ByteSize=7;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
break;
/*8 data bits*/
case DATA_8:
if (Settings.StopBits==STOP_1_5) {
TTY_WARNING("Win_QextSerialPort: 8 Data bits cannot be used with 1.5 stop bits.");
}
else {
Win_CommConfig.dcb.ByteSize=8;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
break;
}
}
UNLOCK_MUTEX();
}
/*!
\fn void Win_QextSerialPort::setStopBits(StopBitsType stopBits)
Sets the number of stop bits used by the serial port. Possible values of stopBits are:
\verbatim
STOP_1 1 stop bit
STOP_1_5 1.5 stop bits
STOP_2 2 stop bits
\endverbatim
\note
This function is subject to the following restrictions:
\par
2 stop bits cannot be used with 5 data bits.
\par
1.5 stop bits cannot be used with 6 or more data bits.
\par
POSIX does not support 1.5 stop bits.
*/
void Win_QextSerialPort::setStopBits(StopBitsType stopBits) {
LOCK_MUTEX();
if (Settings.StopBits!=stopBits) {
if ((Settings.DataBits==DATA_5 && stopBits==STOP_2) ||
(stopBits==STOP_1_5 && Settings.DataBits!=DATA_5)) {
}
else {
Settings.StopBits=stopBits;
}
}
if (isOpen()) {
switch (stopBits) {
/*one stop bit*/
case STOP_1:
Win_CommConfig.dcb.StopBits=ONESTOPBIT;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
break;
/*1.5 stop bits*/
case STOP_1_5:
TTY_PORTABILITY_WARNING("Win_QextSerialPort Portability Warning: 1.5 stop bit operation is not supported by POSIX.");
if (Settings.DataBits!=DATA_5) {
TTY_WARNING("Win_QextSerialPort: 1.5 stop bits can only be used with 5 data bits");
}
else {
Win_CommConfig.dcb.StopBits=ONE5STOPBITS;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
break;
/*two stop bits*/
case STOP_2:
if (Settings.DataBits==DATA_5) {
TTY_WARNING("Win_QextSerialPort: 2 stop bits cannot be used with 5 data bits");
}
else {
Win_CommConfig.dcb.StopBits=TWOSTOPBITS;
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
break;
}
}
UNLOCK_MUTEX();
}
/*!
\fn void Win_QextSerialPort::setBaudRate(BaudRateType baudRate)
Sets the baud rate of the serial port. Note that not all rates are applicable on
all platforms. The following table shows translations of the various baud rate
constants on Windows(including NT/2000) and POSIX platforms. Speeds marked with an *
are speeds that are usable on both Windows and POSIX.
\verbatim
RATE Windows Speed POSIX Speed
----------- ------------- -----------
BAUD50 110 50
BAUD75 110 75
*BAUD110 110 110
BAUD134 110 134.5
BAUD150 110 150
BAUD200 110 200
*BAUD300 300 300
*BAUD600 600 600
*BAUD1200 1200 1200
BAUD1800 1200 1800
*BAUD2400 2400 2400
*BAUD4800 4800 4800
*BAUD9600 9600 9600
BAUD14400 14400 9600
*BAUD19200 19200 19200
*BAUD38400 38400 38400
BAUD56000 56000 38400
*BAUD57600 57600 57600
BAUD76800 57600 76800
*BAUD115200 115200 115200
BAUD128000 128000 115200
BAUD256000 256000 115200
\endverbatim
*/
void Win_QextSerialPort::setBaudRate(BaudRateType baudRate) {
LOCK_MUTEX();
if (Settings.BaudRate!=baudRate) {
switch (baudRate) {
case BAUD50:
case BAUD75:
case BAUD134:
case BAUD150:
case BAUD200:
Settings.BaudRate=BAUD110;
break;
case BAUD1800:
Settings.BaudRate=BAUD1200;
break;
case BAUD76800:
Settings.BaudRate=BAUD57600;
break;
default:
Settings.BaudRate=baudRate;
break;
}
}
if (isOpen()) {
switch (baudRate) {
/*50 baud*/
case BAUD50:
TTY_WARNING("Win_QextSerialPort: Windows does not support 50 baud operation. Switching to 110 baud.");
Win_CommConfig.dcb.BaudRate=CBR_110;
break;
/*75 baud*/
case BAUD75:
TTY_WARNING("Win_QextSerialPort: Windows does not support 75 baud operation. Switching to 110 baud.");
Win_CommConfig.dcb.BaudRate=CBR_110;
break;
/*110 baud*/
case BAUD110:
Win_CommConfig.dcb.BaudRate=CBR_110;
break;
/*134.5 baud*/
case BAUD134:
TTY_WARNING("Win_QextSerialPort: Windows does not support 134.5 baud operation. Switching to 110 baud.");
Win_CommConfig.dcb.BaudRate=CBR_110;
break;
/*150 baud*/
case BAUD150:
TTY_WARNING("Win_QextSerialPort: Windows does not support 150 baud operation. Switching to 110 baud.");
Win_CommConfig.dcb.BaudRate=CBR_110;
break;
/*200 baud*/
case BAUD200:
TTY_WARNING("Win_QextSerialPort: Windows does not support 200 baud operation. Switching to 110 baud.");
Win_CommConfig.dcb.BaudRate=CBR_110;
break;
/*300 baud*/
case BAUD300:
Win_CommConfig.dcb.BaudRate=CBR_300;
break;
/*600 baud*/
case BAUD600:
Win_CommConfig.dcb.BaudRate=CBR_600;
break;
/*1200 baud*/
case BAUD1200:
Win_CommConfig.dcb.BaudRate=CBR_1200;
break;
/*1800 baud*/
case BAUD1800:
TTY_WARNING("Win_QextSerialPort: Windows does not support 1800 baud operation. Switching to 1200 baud.");
Win_CommConfig.dcb.BaudRate=CBR_1200;
break;
/*2400 baud*/
case BAUD2400:
Win_CommConfig.dcb.BaudRate=CBR_2400;
break;
/*4800 baud*/
case BAUD4800:
Win_CommConfig.dcb.BaudRate=CBR_4800;
break;
/*9600 baud*/
case BAUD9600:
Win_CommConfig.dcb.BaudRate=CBR_9600;
break;
/*14400 baud*/
case BAUD14400:
TTY_PORTABILITY_WARNING("Win_QextSerialPort Portability Warning: POSIX does not support 14400 baud operation.");
Win_CommConfig.dcb.BaudRate=CBR_14400;
break;
/*19200 baud*/
case BAUD19200:
Win_CommConfig.dcb.BaudRate=CBR_19200;
break;
/*38400 baud*/
case BAUD38400:
Win_CommConfig.dcb.BaudRate=CBR_38400;
break;
/*56000 baud*/
case BAUD56000:
TTY_PORTABILITY_WARNING("Win_QextSerialPort Portability Warning: POSIX does not support 56000 baud operation.");
Win_CommConfig.dcb.BaudRate=CBR_56000;
break;
/*57600 baud*/
case BAUD57600:
Win_CommConfig.dcb.BaudRate=CBR_57600;
break;
/*76800 baud*/
case BAUD76800:
TTY_WARNING("Win_QextSerialPort: Windows does not support 76800 baud operation. Switching to 57600 baud.");
Win_CommConfig.dcb.BaudRate=CBR_57600;
break;
/*115200 baud*/
case BAUD115200:
Win_CommConfig.dcb.BaudRate=CBR_115200;
break;
/*128000 baud*/
case BAUD128000:
TTY_PORTABILITY_WARNING("Win_QextSerialPort Portability Warning: POSIX does not support 128000 baud operation.");
Win_CommConfig.dcb.BaudRate=CBR_128000;
break;
/*256000 baud*/
case BAUD256000:
TTY_PORTABILITY_WARNING("Win_QextSerialPort Portability Warning: POSIX does not support 256000 baud operation.");
Win_CommConfig.dcb.BaudRate=CBR_256000;
break;
}
SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));
}
UNLOCK_MUTEX();
}
/*!
\fn void Win_QextSerialPort::setDtr(bool set)
Sets DTR line to the requested state (high by default). This function will have no effect if
the port associated with the class is not currently open.
*/
void Win_QextSerialPort::setDtr(bool set) {
LOCK_MUTEX();
if (isOpen()) {
if (set) {
EscapeCommFunction(Win_Handle, SETDTR);
}
else {
EscapeCommFunction(Win_Handle, CLRDTR);
}
}
UNLOCK_MUTEX();
}
/*!
\fn void Win_QextSerialPort::setRts(bool set)
Sets RTS line to the requested state (high by default). This function will have no effect if
the port associated with the class is not currently open.
*/
void Win_QextSerialPort::setRts(bool set) {
LOCK_MUTEX();
if (isOpen()) {
if (set) {
EscapeCommFunction(Win_Handle, SETRTS);
}
else {
EscapeCommFunction(Win_Handle, CLRRTS);
}
}
UNLOCK_MUTEX();
}
/*!
\fn ulong Win_QextSerialPort::lineStatus(void)
returns the line status as stored by the port function. This function will retrieve the states
of the following lines: DCD, CTS, DSR, and RI. On POSIX systems, the following additional lines
can be monitored: DTR, RTS, Secondary TXD, and Secondary RXD. The value returned is an unsigned
long with specific bits indicating which lines are high. The following constants should be used
to examine the states of individual lines:
\verbatim
Mask Line
------ ----
LS_CTS CTS
LS_DSR DSR
LS_DCD DCD
LS_RI RI
\endverbatim
This function will return 0 if the port associated with the class is not currently open.
*/
ulong Win_QextSerialPort::lineStatus(void) {
unsigned long Status=0, Temp=0;
LOCK_MUTEX();
if (isOpen()) {
GetCommModemStatus(Win_Handle, &Temp);
if (Temp&MS_CTS_ON) {
Status|=LS_CTS;
}
if (Temp&MS_DSR_ON) {
Status|=LS_DSR;
}
if (Temp&MS_RING_ON) {
Status|=LS_RI;
}
if (Temp&MS_RLSD_ON) {
Status|=LS_DCD;
}
}
UNLOCK_MUTEX();
return Status;
}
/*!
\fn void Win_QextSerialPort::setTimeout(ulong sec, ulong millisec);
Sets the read and write timeouts for the port to sec seconds and millisec milliseconds.
*/
void Win_QextSerialPort::setTimeout(ulong sec, ulong millisec) {
LOCK_MUTEX();
Settings.Timeout_Sec=sec;
Settings.Timeout_Millisec=millisec;
if(isOpen()) {
Win_CommTimeouts.ReadIntervalTimeout = sec*1000+millisec;
Win_CommTimeouts.ReadTotalTimeoutMultiplier = sec*1000+millisec;
Win_CommTimeouts.ReadTotalTimeoutConstant = 0;
Win_CommTimeouts.WriteTotalTimeoutMultiplier = sec*1000+millisec;
Win_CommTimeouts.WriteTotalTimeoutConstant = 0;
SetCommTimeouts(Win_Handle, &Win_CommTimeouts);
}
UNLOCK_MUTEX();
}