# This part includes the low-level API calls
package Win32API
::CommPort;
use Win32
;
use Win32
::API 0.01;
if ( $] < 5.004 ) {
my $no_silly_warning = $Win32::API::VERSION;
$no_silly_warning = $Win32::API::pack;
}
use Carp
;
use strict
;
#### API declarations ####
no strict
'subs'; # these may be imported someday
use vars
qw(
$_CloseHandle $_CreateFile $_GetCommState
$_ReadFile $_SetCommState $_SetupComm
$_PurgeComm $_CreateEvent $_GetCommTimeouts
$_SetCommTimeouts $_GetCommProperties $_ClearCommBreak
$_ClearCommError $_EscapeCommFunction $_GetCommConfig
$_GetCommMask $_GetCommModemStatus $_SetCommBreak
$_SetCommConfig $_SetCommMask $_TransmitCommChar
$_WaitCommEvent $_WriteFile $_ResetEvent
$_GetOverlappedResult
);
$_CreateFile = new Win32
::API("kernel32", "CreateFile",
[P
, N
, N
, N
, N
, N
, N
], N
);
$_CloseHandle = new Win32
::API("kernel32", "CloseHandle", [N
], N
);
$_GetCommState = new Win32
::API("kernel32", "GetCommState", [N
, P
], I
);
$_SetCommState = new Win32
::API("kernel32", "SetCommState", [N
, P
], I
);
$_SetupComm = new Win32
::API("kernel32", "SetupComm", [N
, N
, N
], I
);
$_PurgeComm = new Win32
::API("kernel32", "PurgeComm", [N
, N
], I
);
$_CreateEvent = new Win32
::API("kernel32", "CreateEvent", [P
, I
, I
, P
], N
);
$_GetCommTimeouts = new Win32
::API("kernel32", "GetCommTimeouts",
[N
, P
], I
);
$_SetCommTimeouts = new Win32
::API("kernel32", "SetCommTimeouts",
[N
, P
], I
);
$_GetCommProperties = new Win32
::API("kernel32", "GetCommProperties",
[N
, P
], I
);
$_ReadFile = new Win32
::API("kernel32", "ReadFile", [N
, P
, N
, P
, P
], I
);
$_WriteFile = new Win32
::API("kernel32", "WriteFile", [N
, P
, N
, P
, P
], I
);
$_TransmitCommChar = new Win32
::API("kernel32", "TransmitCommChar", [N
, I
], I
);
$_ClearCommBreak = new Win32
::API("kernel32", "ClearCommBreak", [N
], I
);
$_SetCommBreak = new Win32
::API("kernel32", "SetCommBreak", [N
], I
);
$_ClearCommError = new Win32
::API("kernel32", "ClearCommError", [N
, P
, P
], I
);
$_EscapeCommFunction = new Win32
::API("kernel32", "EscapeCommFunction",
[N
, N
], I
);
$_GetCommModemStatus = new Win32
::API("kernel32", "GetCommModemStatus",
[N
, P
], I
);
$_GetOverlappedResult = new Win32
::API("kernel32", "GetOverlappedResult",
[N
, P
, P
, I
], I
);
#### these are not used yet
$_GetCommConfig = new Win32
::API("kernel32", "GetCommConfig", [N
, P
, P
], I
);
$_GetCommMask = new Win32
::API("kernel32", "GetCommMask", [N
, P
], I
);
$_SetCommConfig = new Win32
::API("kernel32", "SetCommConfig", [N
, P
, N
], I
);
$_SetCommMask = new Win32
::API("kernel32", "SetCommMask", [N
, N
], I
);
$_WaitCommEvent = new Win32
::API("kernel32", "WaitCommEvent", [N
, P
, P
], I
);
$_ResetEvent = new Win32
::API("kernel32", "ResetEvent", [N
], I
);
use strict
;
use vars
qw($VERSION @ISA @EXPORT @EXPORT_OK %EXPORT_TAGS $RBUF_Size);
$VERSION = '0.19';
$RBUF_Size = 4096;
require Exporter
;
## require AutoLoader;
@ISA = qw(Exporter
);
# Items to export into callers namespace by default. Note: do not export
# names by default without a very good reason. Use EXPORT_OK instead.
# Do not simply export all your public functions/methods/constants.
@EXPORT= qw();
@EXPORT_OK= qw();
%EXPORT_TAGS = (STAT
=> [qw( BM_fCtsHold BM_fDsrHold
BM_fRlsdHold BM_fXoffHold
BM_fXoffSent BM_fEof
BM_fTxim BM_AllBits
MS_CTS_ON MS_DSR_ON
MS_RING_ON MS_RLSD_ON
CE_RXOVER CE_OVERRUN
CE_RXPARITY CE_FRAME
CE_BREAK CE_TXFULL
CE_MODE ST_BLOCK
ST_INPUT ST_OUTPUT
ST_ERROR
)],
RAW
=> [qw( CloseHandle CreateFile
GetCommState ReadFile
SetCommState SetupComm
PurgeComm CreateEvent
GetCommTimeouts SetCommTimeouts
GetCommProperties ClearCommBreak
ClearCommError EscapeCommFunction
GetCommConfig GetCommMask
GetCommModemStatus SetCommBreak
SetCommConfig SetCommMask
TransmitCommChar WaitCommEvent
WriteFile ResetEvent
GetOverlappedResult
PURGE_TXABORT PURGE_RXABORT
PURGE_TXCLEAR PURGE_RXCLEAR
SETXOFF SETXON
SETRTS CLRRTS
SETDTR CLRDTR
SETBREAK CLRBREAK
EV_RXCHAR EV_RXFLAG
EV_TXEMPTY EV_CTS
EV_DSR EV_RLSD
EV_BREAK EV_ERR
EV_RING EV_PERR
EV_RX80FULL EV_EVENT1
EV_EVENT2 ERROR_IO_INCOMPLETE
ERROR_IO_PENDING
)],
COMMPROP
=> [qw( BAUD_USER BAUD_075 BAUD_110
BAUD_134_5 BAUD_150 BAUD_300
BAUD_600 BAUD_1200 BAUD_1800
BAUD_2400 BAUD_4800 BAUD_7200
BAUD_9600 BAUD_14400 BAUD_19200
BAUD_38400 BAUD_56K BAUD_57600
BAUD_115200 BAUD_128K
PST_FAX PST_LAT PST_MODEM
PST_RS232 PST_RS422 PST_RS423
PST_RS449 PST_SCANNER PST_X25
PST_NETWORK_BRIDGE PST_PARALLELPORT
PST_TCPIP_TELNET PST_UNSPECIFIED
PCF_INTTIMEOUTS PCF_PARITY_CHECK
PCF_16BITMODE PCF_DTRDSR
PCF_SPECIALCHARS PCF_RLSD
PCF_RTSCTS PCF_SETXCHAR
PCF_TOTALTIMEOUTS PCF_XONXOFF
SP_BAUD SP_DATABITS SP_HANDSHAKING
SP_PARITY SP_PARITY_CHECK SP_RLSD
SP_STOPBITS SP_SERIALCOMM
DATABITS_5 DATABITS_6 DATABITS_7
DATABITS_8 DATABITS_16 DATABITS_16X
STOPBITS_10 STOPBITS_15 STOPBITS_20
PARITY_SPACE PARITY_NONE PARITY_ODD
PARITY_EVEN PARITY_MARK
COMMPROP_INITIALIZED
)],
DCB
=> [qw( CBR_110 CBR_300 CBR_600
CBR_1200 CBR_2400 CBR_4800
CBR_9600 CBR_14400 CBR_19200
CBR_38400 CBR_56000 CBR_57600
CBR_115200 CBR_128000 CBR_256000
DTR_CONTROL_DISABLE DTR_CONTROL_ENABLE
DTR_CONTROL_HANDSHAKE RTS_CONTROL_DISABLE
RTS_CONTROL_ENABLE RTS_CONTROL_HANDSHAKE
RTS_CONTROL_TOGGLE
EVENPARITY MARKPARITY NOPARITY
ODDPARITY SPACEPARITY
ONESTOPBIT ONE5STOPBITS TWOSTOPBITS
FM_fBinary FM_fParity
FM_fOutxCtsFlow FM_fOutxDsrFlow
FM_fDtrControl FM_fDsrSensitivity
FM_fTXContinueOnXoff FM_fOutX
FM_fInX FM_fErrorChar
FM_fNull FM_fRtsControl
FM_fAbortOnError FM_fDummy2
)],
PARAM
=> [qw( LONGsize SHORTsize OS_Error
nocarp internal_buffer yes_true
)]);
Exporter
::export_ok_tags('STAT', 'RAW', 'COMMPROP', 'DCB', 'PARAM');
$EXPORT_TAGS{ALL
} = \@EXPORT_OK;
#### subroutine wrappers for API calls
sub CloseHandle
{
return unless ( 1 == @_ );
return $_CloseHandle->Call( shift );
}
sub CreateFile
{
return $_CreateFile->Call( @_ );
# returns handle
}
sub GetCommState
{
return $_GetCommState->Call( @_ );
}
sub SetCommState
{
return $_SetCommState->Call( @_ );
}
sub SetupComm
{
return $_SetupComm->Call( @_ );
}
sub PurgeComm
{
return $_PurgeComm->Call( @_ );
}
sub CreateEvent
{
return $_CreateEvent->Call( @_ );
}
sub GetCommTimeouts
{
return $_GetCommTimeouts->Call( @_ );
}
sub SetCommTimeouts
{
return $_SetCommTimeouts->Call( @_ );
}
sub GetCommProperties
{
return $_GetCommProperties->Call( @_ );
}
sub ReadFile
{
return $_ReadFile->Call( @_ );
}
sub WriteFile
{
return $_WriteFile->Call( @_ );
}
sub TransmitCommChar
{
return $_TransmitCommChar->Call( @_ );
}
sub ClearCommBreak
{
return unless ( 1 == @_ );
return $_ClearCommBreak->Call( shift );
}
sub SetCommBreak
{
return unless ( 1 == @_ );
return $_SetCommBreak->Call( shift );
}
sub ClearCommError
{
return $_ClearCommError->Call( @_ );
}
sub EscapeCommFunction
{
return $_EscapeCommFunction->Call( @_ );
}
sub GetCommModemStatus
{
return $_GetCommModemStatus->Call( @_ );
}
sub GetOverlappedResult
{
return $_GetOverlappedResult->Call( @_ );
}
sub GetCommConfig
{
return $_GetCommConfig->Call( @_ );
}
sub GetCommMask
{
return $_GetCommMask->Call( @_ );
}
sub SetCommConfig
{
return $_SetCommConfig->Call( @_ );
}
sub SetCommMask
{
return $_SetCommMask->Call( @_ );
}
sub WaitCommEvent
{
return $_WaitCommEvent->Call( @_ );
}
sub ResetEvent
{
return unless ( 1 == @_ );
return $_ResetEvent->Call( shift );
}
#### "constant" declarations from Win32 header files ####
#### compatible with ActiveState ####
## COMMPROP structure
sub SP_SERIALCOMM
{ 0x1
}
sub BAUD_075
{ 0x1
}
sub BAUD_110
{ 0x2
}
sub BAUD_134_5
{ 0x4
}
sub BAUD_150
{ 0x8
}
sub BAUD_300
{ 0x10
}
sub BAUD_600
{ 0x20
}
sub BAUD_1200
{ 0x40
}
sub BAUD_1800
{ 0x80
}
sub BAUD_2400
{ 0x100
}
sub BAUD_4800
{ 0x200
}
sub BAUD_7200
{ 0x400
}
sub BAUD_9600
{ 0x800
}
sub BAUD_14400
{ 0x1000
}
sub BAUD_19200
{ 0x2000
}
sub BAUD_38400
{ 0x4000
}
sub BAUD_56K
{ 0x8000
}
sub BAUD_57600
{ 0x40000
}
sub BAUD_115200
{ 0x20000
}
sub BAUD_128K
{ 0x10000
}
sub BAUD_USER
{ 0x10000000
}
sub PST_FAX
{ 0x21
}
sub PST_LAT
{ 0x101
}
sub PST_MODEM
{ 0x6
}
sub PST_NETWORK_BRIDGE
{ 0x100
}
sub PST_PARALLELPORT
{ 0x2
}
sub PST_RS232
{ 0x1
}
sub PST_RS422
{ 0x3
}
sub PST_RS423
{ 0x4
}
sub PST_RS449
{ 0x5
}
sub PST_SCANNER
{ 0x22
}
sub PST_TCPIP_TELNET
{ 0x102
}
sub PST_UNSPECIFIED
{ 0 }
sub PST_X25
{ 0x103
}
sub PCF_16BITMODE
{ 0x200
}
sub PCF_DTRDSR
{ 0x1
}
sub PCF_INTTIMEOUTS
{ 0x80
}
sub PCF_PARITY_CHECK
{ 0x8
}
sub PCF_RLSD
{ 0x4
}
sub PCF_RTSCTS
{ 0x2
}
sub PCF_SETXCHAR
{ 0x20
}
sub PCF_SPECIALCHARS
{ 0x100
}
sub PCF_TOTALTIMEOUTS
{ 0x40
}
sub PCF_XONXOFF
{ 0x10
}
sub SP_BAUD
{ 0x2
}
sub SP_DATABITS
{ 0x4
}
sub SP_HANDSHAKING
{ 0x10
}
sub SP_PARITY
{ 0x1
}
sub SP_PARITY_CHECK
{ 0x20
}
sub SP_RLSD
{ 0x40
}
sub SP_STOPBITS
{ 0x8
}
sub DATABITS_5
{ 1 }
sub DATABITS_6
{ 2 }
sub DATABITS_7
{ 4 }
sub DATABITS_8
{ 8 }
sub DATABITS_16
{ 16 }
sub DATABITS_16X
{ 32 }
sub STOPBITS_10
{ 1 }
sub STOPBITS_15
{ 2 }
sub STOPBITS_20
{ 4 }
sub PARITY_NONE
{ 256 }
sub PARITY_ODD
{ 512 }
sub PARITY_EVEN
{ 1024 }
sub PARITY_MARK
{ 2048 }
sub PARITY_SPACE
{ 4096 }
sub COMMPROP_INITIALIZED
{ 0xe73cf52e
}
## DCB structure
sub CBR_110
{ 110 }
sub CBR_300
{ 300 }
sub CBR_600
{ 600 }
sub CBR_1200
{ 1200 }
sub CBR_2400
{ 2400 }
sub CBR_4800
{ 4800 }
sub CBR_9600
{ 9600 }
sub CBR_14400
{ 14400 }
sub CBR_19200
{ 19200 }
sub CBR_38400
{ 38400 }
sub CBR_56000
{ 56000 }
sub CBR_57600
{ 57600 }
sub CBR_115200
{ 115200 }
sub CBR_128000
{ 128000 }
sub CBR_256000
{ 256000 }
sub DTR_CONTROL_DISABLE
{ 0 }
sub DTR_CONTROL_ENABLE
{ 1 }
sub DTR_CONTROL_HANDSHAKE
{ 2 }
sub RTS_CONTROL_DISABLE
{ 0 }
sub RTS_CONTROL_ENABLE
{ 1 }
sub RTS_CONTROL_HANDSHAKE
{ 2 }
sub RTS_CONTROL_TOGGLE
{ 3 }
sub EVENPARITY
{ 2 }
sub MARKPARITY
{ 3 }
sub NOPARITY
{ 0 }
sub ODDPARITY
{ 1 }
sub SPACEPARITY
{ 4 }
sub ONESTOPBIT
{ 0 }
sub ONE5STOPBITS
{ 1 }
sub TWOSTOPBITS
{ 2 }
## Flowcontrol bit mask in DCB
sub FM_fBinary
{ 0x1
}
sub FM_fParity
{ 0x2
}
sub FM_fOutxCtsFlow
{ 0x4
}
sub FM_fOutxDsrFlow
{ 0x8
}
sub FM_fDtrControl
{ 0x30
}
sub FM_fDsrSensitivity
{ 0x40
}
sub FM_fTXContinueOnXoff
{ 0x80
}
sub FM_fOutX
{ 0x100
}
sub FM_fInX
{ 0x200
}
sub FM_fErrorChar
{ 0x400
}
sub FM_fNull
{ 0x800
}
sub FM_fRtsControl
{ 0x3000
}
sub FM_fAbortOnError
{ 0x4000
}
sub FM_fDummy2
{ 0xffff8000
}
## COMSTAT bit mask
sub BM_fCtsHold
{ 0x1
}
sub BM_fDsrHold
{ 0x2
}
sub BM_fRlsdHold
{ 0x4
}
sub BM_fXoffHold
{ 0x8
}
sub BM_fXoffSent
{ 0x10
}
sub BM_fEof
{ 0x20
}
sub BM_fTxim
{ 0x40
}
sub BM_AllBits
{ 0x7f
}
## PurgeComm bit mask
sub PURGE_TXABORT
{ 0x1
}
sub PURGE_RXABORT
{ 0x2
}
sub PURGE_TXCLEAR
{ 0x4
}
sub PURGE_RXCLEAR
{ 0x8
}
## GetCommModemStatus bit mask
sub MS_CTS_ON
{ 0x10
}
sub MS_DSR_ON
{ 0x20
}
sub MS_RING_ON
{ 0x40
}
sub MS_RLSD_ON
{ 0x80
}
## EscapeCommFunction operations
sub SETXOFF
{ 0x1
}
sub SETXON
{ 0x2
}
sub SETRTS
{ 0x3
}
sub CLRRTS
{ 0x4
}
sub SETDTR
{ 0x5
}
sub CLRDTR
{ 0x6
}
sub SETBREAK
{ 0x8
}
sub CLRBREAK
{ 0x9
}
## ClearCommError bit mask
sub CE_RXOVER
{ 0x1
}
sub CE_OVERRUN
{ 0x2
}
sub CE_RXPARITY
{ 0x4
}
sub CE_FRAME
{ 0x8
}
sub CE_BREAK
{ 0x10
}
sub CE_TXFULL
{ 0x100
}
#### LPT only
# sub CE_PTO { 0x200 }
# sub CE_IOE { 0x400 }
# sub CE_DNS { 0x800 }
# sub CE_OOP { 0x1000 }
#### LPT only
sub CE_MODE
{ 0x8000
}
## GetCommMask bits
sub EV_RXCHAR
{ 0x1
}
sub EV_RXFLAG
{ 0x2
}
sub EV_TXEMPTY
{ 0x4
}
sub EV_CTS
{ 0x8
}
sub EV_DSR
{ 0x10
}
sub EV_RLSD
{ 0x20
}
sub EV_BREAK
{ 0x40
}
sub EV_ERR
{ 0x80
}
sub EV_RING
{ 0x100
}
sub EV_PERR
{ 0x200
}
sub EV_RX80FULL
{ 0x400
}
sub EV_EVENT1
{ 0x800
}
sub EV_EVENT2
{ 0x1000
}
## Allowed OVERLAP errors
sub ERROR_IO_INCOMPLETE
{ 996 }
sub ERROR_IO_PENDING
{ 997 }
#### "constant" declarations compatible with ActiveState ####
my $DCBformat="LLLSSSCCCCCCCCS";
my $CP_format1="SSLLLLLLLLLSSLLLLSA*"; # rs232
my $CP_format6="SSLLLLLLLLLSSLLLLLLLLLLLLLLLLLLLLLLLA*"; # modem
my $CP_format0="SA50LA244"; # pre-read
my $OVERLAPPEDformat="LLLLL";
my $TIMEOUTformat="LLLLL";
my $COMSTATformat="LLL";
my $cfg_file_sig="Win32API::SerialPort_Configuration_File -- DO NOT EDIT --\n";
sub SHORTsize
{ 0xffff
; }
sub LONGsize
{ 0xffffffff
; }
sub ST_BLOCK
{0} # status offsets for caller
sub ST_INPUT
{1}
sub ST_OUTPUT
{2}
sub ST_ERROR
{3} # latched
#### Package variable declarations ####
my @Yes_resp = (
"YES","Y",
"ON",
"TRUE","T",
"1"
);
my @binary_opt = (0, 1);
my @byte_opt = (0, 255);
my $Babble = 0;
my $testactive = 0; # test mode active
## my $null=[];
my $null=0;
my $zero=0;
# Preloaded methods go here.
sub OS_Error
{ print Win32
::FormatMessage ( Win32
::GetLastError() ); }
sub get_tick_count
{ return Win32
::GetTickCount(); }
# test*.t only - suppresses default messages
sub set_no_messages
{
return unless (@_ == 2);
$testactive = yes_true
($_[1]);
}
sub nocarp
{ return $testactive }
sub internal_buffer
{ return $RBUF_Size }
sub yes_true
{
my $choice = uc shift;
my $ans = 0;
foreach (@Yes_resp) { $ans = 1 if ( $choice eq $_ ) }
return $ans;
}
sub new {
my $proto = shift;
my $class = ref($proto) || $proto;
my $self = {};
my $ok = 0; # API return value
my $hr = 0; # temporary hashref
my $fmask = 0; # temporary for bit banging
my $fix_baud = 0;
my $key;
my $value;
my $CommPropBlank = " ";
# COMMPROP only used during new
my $CommProperties = " "x300
; # extra buffer for modems
my $CP_Length = 0;
my $CP_Version = 0;
my $CP_ServiceMask = 0;
my $CP_Reserved1 = 0;
my $CP_MaxBaud = 0;
my $CP_ProvCapabilities = 0;
my $CP_SettableParams = 0;
my $CP_SettableBaud = 0;
my $CP_SettableData = 0;
my $CP_SettableStopParity = 0;
my $CP_ProvSpec1 = 0;
my $CP_ProvSpec2 = 0;
my $CP_ProvChar_start = 0;
my $CP_Filler = 0;
# MODEMDEVCAPS
my $MC_ReqSize = 0;
my $MC_SpecOffset = 0;
my $MC_SpecSize = 0;
my $MC_ProvVersion = 0;
my $MC_ManfOffset = 0;
my $MC_ManfSize = 0;
my $MC_ModOffset = 0;
my $MC_ModSize = 0;
my $MC_VerOffset = 0;
my $MC_VerSize = 0;
my $MC_DialOpt = 0;
my $MC_CallFailTime = 0;
my $MC_IdleTime = 0;
my $MC_SpkrVol = 0;
my $MC_SpkrMode = 0;
my $MC_ModOpt = 0;
my $MC_MaxDTE = 0;
my $MC_MaxDCE = 0;
my $MC_Filler = 0;
$self->{NAME
} = shift;
my $quiet = shift;
$self->{"_HANDLE"}=CreateFile
("$self->{NAME}",
0xc0000000
,
0,
$null,
3,
0x40000000
,
$null);
# device name
# GENERIC_READ | GENERIC_WRITE
# no FILE_SHARE_xx
# no SECURITY_xx
# OPEN_EXISTING
# FILE_FLAG_OVERLAPPED
# template file
unless ($self->{"_HANDLE"} >= 1) {
$self->{"_HANDLE"} = 0;
return 0 if ($quiet);
return if (nocarp
);
OS_Error
;
carp
"can't open device: $self->{NAME}\n";
return;
}
# let Win32 know we allowed room for modem properties
$CP_Length = 300;
$CP_ProvSpec1 = COMMPROP_INITIALIZED
;
$CommProperties = pack($CP_format0,
$CP_Length,
$CommPropBlank,
$CP_ProvSpec1,
$CommPropBlank);
$ok=GetCommProperties
($self->{"_HANDLE"}, $CommProperties);
unless ( $ok ) {
OS_Error
;
carp
"can't get COMMPROP block";
undef $self;
return;
}
($CP_Length,
$CP_Version,
$CP_ServiceMask,
$CP_Reserved1,
$self->{"_MaxTxQueue"},
$self->{"_MaxRxQueue"},
$CP_MaxBaud,
$self->{"_TYPE"},
$CP_ProvCapabilities,
$CP_SettableParams,
$CP_SettableBaud,
$CP_SettableData,
$CP_SettableStopParity,
$self->{WRITEBUF
},
$self->{READBUF
},
$CP_ProvSpec1,
$CP_ProvSpec2,
$CP_ProvChar_start,
$CP_Filler)= unpack($CP_format1, $CommProperties);
if (($CP_Length > 64) and ($self->{"_TYPE"} == PST_RS232
)) {
carp
"invalid COMMPROP block length= $CP_Length";
undef $self;
return;
}
if ($CP_ServiceMask != SP_SERIALCOMM
) {
carp
"doesn't claim to be a serial port\n";
undef $self;
return;
}
if ($self->{"_TYPE"} == PST_MODEM
) {
($CP_Length,
$CP_Version,
$CP_ServiceMask,
$CP_Reserved1,
$self->{"_MaxTxQueue"},
$self->{"_MaxRxQueue"},
$CP_MaxBaud,
$self->{"_TYPE"},
$CP_ProvCapabilities,
$CP_SettableParams,
$CP_SettableBaud,
$CP_SettableData,
$CP_SettableStopParity,
$self->{WRITEBUF
},
$self->{READBUF
},
$CP_ProvSpec1,
$CP_ProvSpec2,
$CP_ProvChar_start,
$MC_ReqSize,
$MC_SpecOffset,
$MC_SpecSize,
$MC_ProvVersion,
$MC_ManfOffset,
$MC_ManfSize,
$MC_ModOffset,
$MC_ModSize,
$MC_VerOffset,
$MC_VerSize,
$MC_DialOpt,
$MC_CallFailTime,
$MC_IdleTime,
$MC_SpkrVol,
$MC_SpkrMode,
$MC_ModOpt,
$MC_MaxDTE,
$MC_MaxDCE,
$MC_Filler)= unpack($CP_format6, $CommProperties);
if ($Babble) {
printf "\nMODEMDEVCAPS:\n";
printf "\$MC_ActualSize= %d\n", $CP_ProvChar_start;
printf "\$MC_ReqSize= %d\n", $MC_ReqSize;
printf "\$MC_SpecOffset= %d\n", $MC_SpecOffset;
printf "\$MC_SpecSize= %d\n", $MC_SpecSize;
if ($MC_SpecOffset) {
printf " DeviceSpecificData= %s\n", substr ($CommProperties,
60+$MC_SpecOffset, $MC_SpecSize);
}
printf "\$MC_ProvVersion= %d\n", $MC_ProvVersion;
printf "\$MC_ManfOffset= %d\n", $MC_ManfOffset;
printf "\$MC_ManfSize= %d\n", $MC_ManfSize;
if ($MC_ManfOffset) {
printf " Manufacturer= %s\n", substr ($CommProperties,
60+$MC_ManfOffset, $MC_ManfSize);
}
printf "\$MC_ModOffset= %d\n", $MC_ModOffset;
printf "\$MC_ModSize= %d\n", $MC_ModSize;
if ($MC_ModOffset) {
printf " Model= %s\n", substr ($CommProperties,
60+$MC_ModOffset, $MC_ModSize);
}
printf "\$MC_VerOffset= %d\n", $MC_VerOffset;
printf "\$MC_VerSize= %d\n", $MC_VerSize;
if ($MC_VerOffset) {
printf " Version= %s\n", substr ($CommProperties,
60+$MC_VerOffset, $MC_VerSize);
}
printf "\$MC_DialOpt= %lx\n", $MC_DialOpt;
printf "\$MC_CallFailTime= %d\n", $MC_CallFailTime;
printf "\$MC_IdleTime= %d\n", $MC_IdleTime;
printf "\$MC_SpkrVol= %d\n", $MC_SpkrVol;
printf "\$MC_SpkrMode= %d\n", $MC_SpkrMode;
printf "\$MC_ModOpt= %lx\n", $MC_ModOpt;
printf "\$MC_MaxDTE= %d\n", $MC_MaxDTE;
printf "\$MC_MaxDCE= %d\n", $MC_MaxDCE;
$MC_Filler= $MC_Filler; # for -w
}
## $MC_ReqSize = 250;
if ($CP_ProvChar_start != $MC_ReqSize) {
printf "\nARGH, a Bug! The \$CommProperties buffer must be ";
printf "at least %d bytes.\n", $MC_ReqSize+60;
}
}
## if (1 | $Babble) {
if ($Babble) {
printf "\$CP_Length= %d\n", $CP_Length;
printf "\$CP_Version= %d\n", $CP_Version;
printf "\$CP_ServiceMask= %lx\n", $CP_ServiceMask;
printf "\$CP_Reserved1= %lx\n", $CP_Reserved1;
printf "\$CP_MaxTxQueue= %lx\n", $self->{"_MaxTxQueue"};
printf "\$CP_MaxRxQueue= %lx\n", $self->{"_MaxRxQueue"};
printf "\$CP_MaxBaud= %lx\n", $CP_MaxBaud;
printf "\$CP_ProvSubType= %lx\n", $self->{"_TYPE"};
printf "\$CP_ProvCapabilities= %lx\n", $CP_ProvCapabilities;
printf "\$CP_SettableParams= %lx\n", $CP_SettableParams;
printf "\$CP_SettableBaud= %lx\n", $CP_SettableBaud;
printf "\$CP_SettableData= %x\n", $CP_SettableData;
printf "\$CP_SettableStopParity= %x\n", $CP_SettableStopParity;
printf "\$CP_CurrentTxQueue= %lx\n", $self->{WRITEBUF
};
printf "\$CP_CurrentRxQueue= %lx\n", $self->{READBUF
};
printf "\$CP_ProvSpec1= %lx\n", $CP_ProvSpec1;
printf "\$CP_ProvSpec2= %lx\n", $CP_ProvSpec2;
}
# "private" data
$self->{"_INIT"} = undef;
$self->{"_DEBUG_C"} = 0;
$self->{"_LATCH"} = 0;
$self->{"_W_BUSY"} = 0;
$self->{"_R_BUSY"} = 0;
$self->{"_TBUFMAX"} = $self->{"_MaxTxQueue"} ?
$self->{"_MaxTxQueue"} : LONGsize
;
$self->{"_RBUFMAX"} = $self->{"_MaxRxQueue"} ?
$self->{"_MaxRxQueue"} : LONGsize
;
# buffers
$self->{"_R_OVERLAP"} = " "x24
;
$self->{"_W_OVERLAP"} = " "x24
;
$self->{"_TIMEOUT"} = " "x24
;
$self->{"_RBUF"} = " "x
$RBUF_Size;
# allowed setting hashes
$self->{"_L_BAUD"} = {};
$self->{"_L_STOP"} = {};
$self->{"_L_PARITY"} = {};
$self->{"_L_DATA"} = {};
$self->{"_L_HSHAKE"} = {};
# capability flags
$fmask = $CP_SettableParams;
$self->{"_C_BAUD"} = $fmask & SP_BAUD
;
$self->{"_C_DATA"} = $fmask & SP_DATABITS
;
$self->{"_C_STOP"} = $fmask & SP_STOPBITS
;
$self->{"_C_HSHAKE"} = $fmask & SP_HANDSHAKING
;
$self->{"_C_PARITY_CFG"} = $fmask & SP_PARITY
;
$self->{"_C_PARITY_EN"} = $fmask & SP_PARITY_CHECK
;
$self->{"_C_RLSD_CFG"} = $fmask & SP_RLSD
;
$fmask = $CP_ProvCapabilities;
$self->{"_C_RLSD"} = $fmask & PCF_RLSD
;
$self->{"_C_PARITY_CK"} = $fmask & PCF_PARITY_CHECK
;
$self->{"_C_DTRDSR"} = $fmask & PCF_DTRDSR
;
$self->{"_C_16BITMODE"} = $fmask & PCF_16BITMODE
;
$self->{"_C_RTSCTS"} = $fmask & PCF_RTSCTS
;
$self->{"_C_XONXOFF"} = $fmask & PCF_XONXOFF
;
$self->{"_C_XON_CHAR"} = $fmask & PCF_SETXCHAR
;
$self->{"_C_SPECHAR"} = $fmask & PCF_SPECIALCHARS
;
$self->{"_C_INT_TIME"} = $fmask & PCF_INTTIMEOUTS
;
$self->{"_C_TOT_TIME"} = $fmask & PCF_TOTALTIMEOUTS
;
if ($self->{"_C_INT_TIME"}) {
$self->{"_N_RINT"} = LONGsize
; # min interval default
}
else {
$self->{"_N_RINT"} = 0;
}
$self->{"_N_RTOT"} = 0;
$self->{"_N_RCONST"} = 0;
if ($self->{"_C_TOT_TIME"}) {
$self->{"_N_WCONST"} = 201; # startup overhead + 1
$self->{"_N_WTOT"} = 11; # per char out + 1
}
else {
$self->{"_N_WTOT"} = 0;
$self->{"_N_WCONST"} = 0;
}
$hr = \
%{$self->{"_L_HSHAKE"}};
if ($self->{"_C_HSHAKE"}) {
${$hr}{"xoff"} = "xoff" if ($fmask & PCF_XONXOFF
);
${$hr}{"rts"} = "rts" if ($fmask & PCF_RTSCTS
);
${$hr}{"dtr"} = "dtr" if ($fmask & PCF_DTRDSR
);
${$hr}{"none"} = "none";
}
else { $self->{"_N_HSHAKE"} = undef; }
#### really just using the keys here, so value = Win32_definition
#### in case we ever need it for something else
# first check for programmable baud
$hr = \
%{$self->{"_L_BAUD"}};
if ($CP_MaxBaud & BAUD_USER
) {
$fmask = $CP_SettableBaud;
${$hr}{110} = CBR_110
if ($fmask & BAUD_110
);
${$hr}{300} = CBR_300
if ($fmask & BAUD_300
);
${$hr}{600} = CBR_600
if ($fmask & BAUD_600
);
${$hr}{1200} = CBR_1200
if ($fmask & BAUD_1200
);
${$hr}{2400} = CBR_2400
if ($fmask & BAUD_2400
);
${$hr}{4800} = CBR_4800
if ($fmask & BAUD_4800
);
${$hr}{9600} = CBR_9600
if ($fmask & BAUD_9600
);
${$hr}{14400} = CBR_14400
if ($fmask & BAUD_14400
);
${$hr}{19200} = CBR_19200
if ($fmask & BAUD_19200
);
${$hr}{38400} = CBR_38400
if ($fmask & BAUD_38400
);
${$hr}{56000} = CBR_56000
if ($fmask & BAUD_56K
);
${$hr}{57600} = CBR_57600
if ($fmask & BAUD_57600
);
${$hr}{115200} = CBR_115200
if ($fmask & BAUD_115200
);
${$hr}{128000} = CBR_128000
if ($fmask & BAUD_128K
);
${$hr}{256000} = CBR_256000
if (0); # reserved ??
}
else {
# get fixed baud from CP_MaxBaud
$fmask = $CP_MaxBaud;
$fix_baud = 75 if ($fmask & BAUD_075
);
$fix_baud = 110 if ($fmask & BAUD_110
);
$fix_baud = 134.5 if ($fmask & BAUD_134_5
);
$fix_baud = 150 if ($fmask & BAUD_150
);
$fix_baud = 300 if ($fmask & BAUD_300
);
$fix_baud = 600 if ($fmask & BAUD_600
);
$fix_baud = 1200 if ($fmask & BAUD_1200
);
$fix_baud = 1800 if ($fmask & BAUD_1800
);
$fix_baud = 2400 if ($fmask & BAUD_2400
);
$fix_baud = 4800 if ($fmask & BAUD_4800
);
$fix_baud = 7200 if ($fmask & BAUD_7200
);
$fix_baud = 9600 if ($fmask & BAUD_9600
);
$fix_baud = 14400 if ($fmask & BAUD_14400
);
$fix_baud = 19200 if ($fmask & BAUD_19200
);
$fix_baud = 34800 if ($fmask & BAUD_38400
);
$fix_baud = 56000 if ($fmask & BAUD_56K
);
$fix_baud = 57600 if ($fmask & BAUD_57600
);
$fix_baud = 115200 if ($fmask & BAUD_115200
);
$fix_baud = 128000 if ($fmask & BAUD_128K
);
${$hr}{$fix_baud} = $fix_baud;
$self->{"_N_BAUD"} = undef;
}
#### data bits
$fmask = $CP_SettableData;
if ($self->{"_C_DATA"}) {
$hr = \
%{$self->{"_L_DATA"}};
${$hr}{5} = 5 if ($fmask & DATABITS_5
);
${$hr}{6} = 6 if ($fmask & DATABITS_6
);
${$hr}{7} = 7 if ($fmask & DATABITS_7
);
${$hr}{8} = 8 if ($fmask & DATABITS_8
);
${$hr}{16} = 16 if ($fmask & DATABITS_16
);
## ${$hr}{16X} = 16 if ($fmask & DATABITS_16X);
}
else { $self->{"_N_DATA"} = undef; }
#### value = (DCB Win32_definition + 1) so 0 means unchanged
$fmask = $CP_SettableStopParity;
if ($self->{"_C_STOP"}) {
$hr = \
%{$self->{"_L_STOP"}};
${$hr}{1} = 1 + ONESTOPBIT
if ($fmask & STOPBITS_10
);
${$hr}{1.5} = 1 + ONE5STOPBITS
if ($fmask & STOPBITS_15
);
${$hr}{2} = 1 + TWOSTOPBITS
if ($fmask & STOPBITS_20
);
}
else { $self->{"_N_STOP"} = undef; }
if ($self->{"_C_PARITY_CFG"}) {
$hr = \
%{$self->{"_L_PARITY"}};
${$hr}{"none"} = 1 + NOPARITY
if ($fmask & PARITY_NONE
);
${$hr}{"even"} = 1 + EVENPARITY
if ($fmask & PARITY_EVEN
);
${$hr}{"odd"} = 1 + ODDPARITY
if ($fmask & PARITY_ODD
);
${$hr}{"mark"} = 1 + MARKPARITY
if ($fmask & PARITY_MARK
);
${$hr}{"space"} = 1 + SPACEPARITY
if ($fmask & PARITY_SPACE
);
}
else { $self->{"_N_PARITY"} = undef; }
$hr = 0; # no loops
# changable dcb parameters
# 0 = no change requested
# mask_on: requested value for OR
# mask_off: complement of requested value for AND
$self->{"_N_FM_ON"} = 0;
$self->{"_N_FM_OFF"} = 0;
$self->{"_N_AUX_ON"} = 0;
$self->{"_N_AUX_OFF"} = 0;
### "VALUE" is initialized from DCB by default (but also in %validate)
# 0 = no change requested
# integer: requested value or (value+1 if 0 is a legal value)
# binary: 1=false requested, 2=true requested
$self->{"_N_XONLIM"} = 0;
$self->{"_N_XOFFLIM"} = 0;
$self->{"_N_XOFFCHAR"} = 0;
$self->{"_N_XONCHAR"} = 0;
$self->{"_N_ERRCHAR"} = 0;
$self->{"_N_EOFCHAR"} = 0;
$self->{"_N_EVTCHAR"} = 0;
$self->{"_N_BINARY"} = 0;
$self->{"_N_PARITY_EN"} = 0;
### "_N_items" for save/start
$self->{"_N_READBUF"} = 0;
$self->{"_N_WRITEBUF"} = 0;
$self->{"_N_HSHAKE"} = 0;
### The "required" DCB values are deliberately NOT defined. That way,
### write_settings can verify they "exist" to assure they got set.
### $self->{"_N_BAUD"}
### $self->{"_N_DATA"}
### $self->{"_N_STOP"}
### $self->{"_N_PARITY"}
$self->{"_R_EVENT"} = CreateEvent
($null, # no security
1, # explicit reset req
0, # initial event reset
$null); # no name
unless ($self->{"_R_EVENT"}) {
OS_Error
;
carp
"could not create required read event";
undef $self;
return;
}
$self->{"_W_EVENT"} = CreateEvent
($null, # no security
1, # explicit reset req
0, # initial event reset
$null); # no name
unless ($self->{"_W_EVENT"}) {
OS_Error
;
carp
"could not create required write event";
undef $self;
return;
}
$self->{"_R_OVERLAP"} = pack($OVERLAPPEDformat,
$zero, # osRead_Internal,
$zero, # osRead_InternalHigh,
$zero, # osRead_Offset,
$zero, # osRead_OffsetHigh,
$self->{"_R_EVENT"});
$self->{"_W_OVERLAP"} = pack($OVERLAPPEDformat,
$zero, # osWrite_Internal,
$zero, # osWrite_InternalHigh,
$zero, # osWrite_Offset,
$zero, # osWrite_OffsetHigh,
$self->{"_W_EVENT"});
# Device Control Block (DCB)
unless ( fetch_DCB
($self) ) {
carp
"can't read Device Control Block for $self->{NAME}\n";
undef $self;
return;
}
$self->{"_L_BAUD"}{$self->{BAUD
}} = $self->{BAUD
}; # actual must be ok
# Read Timeouts
unless ( GetCommTimeouts
($self->{"_HANDLE"}, $self->{"_TIMEOUT"}) ) {
carp
"Error in GetCommTimeouts";
undef $self;
return;
}
($self->{RINT
},
$self->{RTOT
},
$self->{RCONST
},
$self->{WTOT
},
$self->{WCONST
})= unpack($TIMEOUTformat, $self->{"_TIMEOUT"});
bless ($self, $class);
return $self;
}
sub fetch_DCB
{
my $self = shift;
my $ok;
my $hr;
my $fmask;
my $key;
my $value;
my $dcb = " "x32
;
GetCommState
($self->{"_HANDLE"}, $dcb) or return;
($self->{"_DCBLength"},
$self->{BAUD
},
$self->{"_BitMask"},
$self->{"_ResvWORD"},
$self->{XONLIM
},
$self->{XOFFLIM
},
$self->{DATA
},
$self->{"_Parity"},
$self->{"_StopBits"},
$self->{XONCHAR
},
$self->{XOFFCHAR
},
$self->{ERRCHAR
},
$self->{EOFCHAR
},
$self->{EVTCHAR
},
$self->{"_PackWORD"})= unpack($DCBformat, $dcb);
if ($self->{"_DCBLength"} > 32) {
carp
"invalid DCB block length";
return;
}
if ($Babble) {
printf "DCBLength= %d\n", $self->{"_DCBLength"};
printf "BaudRate= %d\n", $self->{BAUD
};
printf "BitMask= %lx\n", $self->{"_BitMask"};
printf "ResvWORD= %x\n", $self->{"_ResvWORD"};
printf "XonLim= %x\n", $self->{XONLIM
};
printf "XoffLim= %x\n", $self->{XOFFLIM
};
printf "ByteSize= %d\n", $self->{DATA
};
printf "Parity= %d\n", $self->{"_Parity"};
printf "StopBits= %d\n", $self->{"_StopBits"};
printf "XonChar= %x\n", $self->{XONCHAR
};
printf "XoffChar= %x\n", $self->{XOFFCHAR
};
printf "ErrorChar= %x\n", $self->{ERRCHAR
};
printf "EofChar= %x\n", $self->{EOFCHAR
};
printf "EvtChar= %x\n", $self->{EVTCHAR
};
printf "PackWORD= %x\n", $self->{"_PackWORD"};
printf "handle= %d\n\n", $self->{"_HANDLE"};
}
$fmask = 1 + $self->{"_StopBits"};
while (($key, $value) = each %{ $self->{"_L_STOP"} }) {
if ($value == $fmask) {
$self->{STOP
} = $key;
}
}
$fmask = 1 + $self->{"_Parity"};
while (($key, $value) = each %{ $self->{"_L_PARITY"} }) {
if ($value == $fmask) {
$self->{PARITY
} = $key;
}
}
$fmask = $self->{"_BitMask"};
$hr = DTR_CONTROL_HANDSHAKE
;
$ok = RTS_CONTROL_HANDSHAKE
;
if ($fmask & ( $hr << 4) ) {
$self->{HSHAKE
} = "dtr";
}
elsif ($fmask & ( $ok << 12) ) {
$self->{HSHAKE
} = "rts";
}
elsif ($fmask & ( FM_fOutX
| FM_fInX
) ) {
$self->{HSHAKE
} = "xoff";
}
else {
$self->{HSHAKE
} = "none";
}
$self->{BINARY
} = ($fmask & FM_fBinary
);
$self->{PARITY_EN
} = ($fmask & FM_fParity
);
if ($fmask & FM_fDummy2
) {
carp
"Unknown DCB Flow Mask Bit in $self->{NAME}";
}
1;
}
sub init_done
{
my $self = shift;
return 0 unless (defined $self->{"_INIT"});
return $self->{"_INIT"};
}
sub update_DCB
{
my $self = shift;
my $ok = 0;
return unless (defined $self->{"_INIT"});
fetch_DCB
($self);
if ($self->{"_N_HSHAKE"}) {
$self->{HSHAKE
} = $self->{"_N_HSHAKE"};
if ($self->{HSHAKE
} eq "dtr" ) {
$self->{"_N_FM_ON"} = 0x1028
;
$self->{"_N_FM_OFF"} = 0xffffdceb
;
}
elsif ($self->{HSHAKE
} eq "rts" ) {
$self->{"_N_FM_ON"} = 0x2014
;
$self->{"_N_FM_OFF"} = 0xffffecd7
;
}
elsif ($self->{HSHAKE
} eq "xoff" ) {
$self->{"_N_FM_ON"} = 0x1310
;
$self->{"_N_FM_OFF"} = 0xffffdfd3
;
}
else {
$self->{"_N_FM_ON"} = 0x1010
;
$self->{"_N_FM_OFF"} = 0xffffdcd3
;
}
$self->{"_N_HSHAKE"} = 0;
}
if ($self->{"_N_PARITY_EN"}) {
if (2 == $self->{"_N_PARITY_EN"}) {
$self->{"_N_FM_ON"} |= FM_fParity
; # enable
if ($self->{"_N_FM_OFF"}) {
$self->{"_N_FM_OFF"} |= FM_fParity
;
}
else { $self->{"_N_FM_OFF"} = LONGsize
; }
}
else {
if ($self->{"_N_FM_ON"}) {
$self->{"_N_FM_ON"} &= ~FM_fParity
; # disable
}
if ($self->{"_N_FM_OFF"}) {
$self->{"_N_FM_OFF"} &= ~FM_fParity
;
}
else { $self->{"_N_FM_OFF"} = ~FM_fParity
; }
}
## DEBUG ##
## printf "_N_FM_ON=%lx\n", $self->{"_N_FM_ON"}; ## DEBUG ##
## printf "_N_FM_OFF=%lx\n", $self->{"_N_FM_OFF"}; ## DEBUG ##
## DEBUG ##
$self->{"_N_PARITY_EN"} = 0;
}
## DEBUG ##
## printf "_N_AUX_ON=%lx\n", $self->{"_N_AUX_ON"}; ## DEBUG ##
## printf "_N_AUX_OFF=%lx\n", $self->{"_N_AUX_OFF"}; ## DEBUG ##
## DEBUG ##
if ( $self->{"_N_AUX_ON"} or $self->{"_N_AUX_OFF"} ) {
if ( $self->{"_N_FM_OFF"} ) {
$self->{"_N_FM_OFF"} &= $self->{"_N_AUX_OFF"};
}
else {
$self->{"_N_FM_OFF"} = $self->{"_N_AUX_OFF"};
}
$self->{"_N_FM_ON"} |= $self->{"_N_AUX_ON"};
$self->{"_N_AUX_ON"} = 0;
$self->{"_N_AUX_OFF"} = 0;
}
## DEBUG ##
## printf "_N_FM_ON=%lx\n", $self->{"_N_FM_ON"}; ## DEBUG ##
## printf "_N_FM_OFF=%lx\n", $self->{"_N_FM_OFF"}; ## DEBUG ##
## DEBUG ##
if ( $self->{"_N_FM_ON"} or $self->{"_N_FM_OFF"} ) {
$self->{"_BitMask"} &= $self->{"_N_FM_OFF"};
$self->{"_BitMask"} |= $self->{"_N_FM_ON"};
$self->{"_N_FM_ON"} = 0;
$self->{"_N_FM_OFF"} = 0;
}
if ($self->{"_N_XONLIM"}) {
$self->{XONLIM
} = $self->{"_N_XONLIM"} - 1;
$self->{"_N_XONLIM"} = 0;
}
if ($self->{"_N_XOFFLIM"}) {
$self->{XOFFLIM
} = $self->{"_N_XOFFLIM"} - 1;
$self->{"_N_XOFFLIM"} = 0;
}
if ($self->{"_N_BAUD"}) {
$self->{BAUD
} = $self->{"_N_BAUD"};
$self->{"_N_BAUD"} = 0;
}
if ($self->{"_N_DATA"}) {
$self->{DATA
} = $self->{"_N_DATA"};
$self->{"_N_DATA"} = 0;
}
if ($self->{"_N_STOP"}) {
$self->{"_StopBits"} = $self->{"_N_STOP"} - 1;
$self->{"_N_STOP"} = 0;
}
if ($self->{"_N_PARITY"}) {
$self->{"_Parity"} = $self->{"_N_PARITY"} - 1;
$self->{"_N_PARITY"} = 0;
}
if ($self->{"_N_XONCHAR"}) {
$self->{XONCHAR
} = $self->{"_N_XONCHAR"} - 1;
$self->{"_N_XONCHAR"} = 0;
}
if ($self->{"_N_XOFFCHAR"}) {
$self->{XOFFCHAR
} = $self->{"_N_XOFFCHAR"} - 1;
$self->{"_N_XOFFCHAR"} = 0;
}
if ($self->{"_N_ERRCHAR"}) {
$self->{ERRCHAR
} = $self->{"_N_ERRCHAR"} - 1;
$self->{"_N_ERRCHAR"} = 0;
}
if ($self->{"_N_EOFCHAR"}) {
$self->{EOFCHAR
} = $self->{"_N_EOFCHAR"} - 1;
$self->{"_N_EOFCHAR"} = 0;
}
if ($self->{"_N_EVTCHAR"}) {
$self->{EVTCHAR
} = $self->{"_N_EVTCHAR"} - 1;
$self->{"_N_EVTCHAR"} = 0;
}
my $dcb = pack($DCBformat,
$self->{"_DCBLength"},
$self->{BAUD
},
$self->{"_BitMask"},
$self->{"_ResvWORD"},
$self->{XONLIM
},
$self->{XOFFLIM
},
$self->{DATA
},
$self->{"_Parity"},
$self->{"_StopBits"},
$self->{XONCHAR
},
$self->{XOFFCHAR
},
$self->{ERRCHAR
},
$self->{EOFCHAR
},
$self->{EVTCHAR
},
$self->{"_PackWORD"});
if ( SetCommState
($self->{"_HANDLE"}, $dcb) ) {
print "updated DCB for $self->{NAME}\n" if ($Babble);
## DEBUG ##
## printf "DEBUG BitMask= %lx\n", $self->{"_BitMask"}; ## DEBUG ##
## DEBUG ##
}
else {
carp
"SetCommState failed";
OS_Error
;
if ($Babble) {
printf "\ntried to write:\n";
printf "DCBLength= %d\n", $self->{"_DCBLength"};
printf "BaudRate= %d\n", $self->{BAUD
};
printf "BitMask= %lx\n", $self->{"_BitMask"};
printf "ResvWORD= %x\n", $self->{"_ResvWORD"};
printf "XonLim= %x\n", $self->{XONLIM
};
printf "XoffLim= %x\n", $self->{XOFFLIM
};
printf "ByteSize= %d\n", $self->{DATA
};
printf "Parity= %d\n", $self->{"_Parity"};
printf "StopBits= %d\n", $self->{"_StopBits"};
printf "XonChar= %x\n", $self->{XONCHAR
};
printf "XoffChar= %x\n", $self->{XOFFCHAR
};
printf "ErrorChar= %x\n", $self->{ERRCHAR
};
printf "EofChar= %x\n", $self->{EOFCHAR
};
printf "EvtChar= %x\n", $self->{EVTCHAR
};
printf "PackWORD= %x\n", $self->{"_PackWORD"};
printf "handle= %d\n", $self->{"_HANDLE"};
}
}
}
sub initialize
{
my $self = shift;
my $item;
my $fault = 0;
foreach $item (@_) {
unless (exists $self->{"_N_$item"}) {
# must be "exists" so undef=not_settable
$fault++;
nocarp
or carp
"Missing REQUIRED setting for $item";
}
}
unless ($self->{"_INIT"}) {
$self->{"_INIT"} = 1 unless ($fault);
$self->{"_BitMask"} = 0x1011
;
$self->{XONLIM
} = 100 unless ($self->{"_N_XONLIM"});
$self->{XOFFLIM
} = 100 unless ($self->{"_N_XOFFLIM"});
$self->{XONCHAR
} = 0x11
unless ($self->{"_N_XONCHAR"});
$self->{XOFFCHAR
} = 0x13
unless ($self->{"_N_XOFFCHAR"});
$self->{ERRCHAR
} = 0 unless ($self->{"_N_ERRCHAR"});
$self->{EOFCHAR
} = 0 unless ($self->{"_N_EOFCHAR"});
$self->{EVTCHAR
} = 0 unless ($self->{"_N_EVTCHAR"});
update_timeouts
($self);
}
if ($self->{"_N_READBUF"} or $self->{"_N_WRITEBUF"}) {
if ($self->{"_N_READBUF"}) {
$self->{READBUF
} = $self->{"_N_READBUF"};
}
if ($self->{"_N_WRITEBUF"}) {
$self->{WRITEBUF
} = $self->{"_N_WRITEBUF"};
}
$self->{"_N_READBUF"} = 0;
$self->{"_N_WRITEBUF"} = 0;
SetupComm
($self->{"_HANDLE"}, $self->{READBUF
}, $self->{WRITEBUF
});
}
purge_all
($self);
return $fault;
}
sub is_status
{
my $self = shift;
my $ok = 0;
my $error_p = " "x4
;
my $CommStatus = " "x12
;
if (@_ and $testactive) {
$self->{"_LATCH"} |= shift;
}
$ok=ClearCommError
($self->{"_HANDLE"}, $error_p, $CommStatus);
my $Error_BitMask = unpack("L", $error_p);
$self->{"_LATCH"} |= $Error_BitMask;
my @stat = unpack($COMSTATformat, $CommStatus);
push @stat, $self->{"_LATCH"};
$stat[ST_BLOCK
] &= BM_AllBits
;
if ( $Babble or $self->{"_DEBUG_C"} ) {
printf "Blocking Bits= %d\n", $stat[ST_BLOCK
];
printf "Input Queue= %d\n", $stat[ST_INPUT
];
printf "Output Queue= %d\n", $stat[ST_OUTPUT
];
printf "Latched Errors= %d\n", $stat[ST_ERROR
];
printf "ok= %d\n", $ok;
}
return ($ok ? @stat : undef);
}
sub reset_error
{
my $self = shift;
my $was = $self->{"_LATCH"};
$self->{"_LATCH"} = 0;
return $was;
}
sub can_baud
{
my $self = shift;
return $self->{"_C_BAUD"};
}
sub can_databits
{
my $self = shift;
return $self->{"_C_DATA"};
}
sub can_stopbits
{
my $self = shift;
return $self->{"_C_STOP"};
}
sub can_dtrdsr
{
my $self = shift;
return $self->{"_C_DTRDSR"};
}
sub can_handshake
{
my $self = shift;
return $self->{"_C_HSHAKE"};
}
sub can_parity_check
{
my $self = shift;
return $self->{"_C_PARITY_CK"};
}
sub can_parity_config
{
my $self = shift;
return $self->{"_C_PARITY_CFG"};
}
sub can_parity_enable
{
my $self = shift;
return $self->{"_C_PARITY_EN"};
}
sub can_rlsd_config
{
my $self = shift;
return $self->{"_C_RLSD_CFG"};
}
sub can_rlsd
{
my $self = shift;
return $self->{"_C_RLSD"};
}
sub can_16bitmode
{
my $self = shift;
return $self->{"_C_16BITMODE"};
}
sub is_rs232
{
my $self = shift;
return ($self->{"_TYPE"} == PST_RS232
);
}
sub is_modem
{
my $self = shift;
return ($self->{"_TYPE"} == PST_MODEM
);
}
sub can_rtscts
{
my $self = shift;
return $self->{"_C_RTSCTS"};
}
sub can_xonxoff
{
my $self = shift;
return $self->{"_C_XONXOFF"};
}
sub can_xon_char
{
my $self = shift;
return $self->{"_C_XON_CHAR"};
}
sub can_spec_char
{
my $self = shift;
return $self->{"_C_SPECHAR"};
}
sub can_interval_timeout
{
my $self = shift;
return $self->{"_C_INT_TIME"};
}
sub can_total_timeout
{
my $self = shift;
return $self->{"_C_TOT_TIME"};
}
sub is_handshake
{
my $self = shift;
if (@_) {
return unless $self->{"_C_HSHAKE"};
return unless (defined $self->{"_L_HSHAKE"}{$_[0]});
$self->{"_N_HSHAKE"} = $self->{"_L_HSHAKE"}{$_[0]};
update_DCB
($self);
}
return unless fetch_DCB
($self);
return $self->{HSHAKE
};
}
sub are_handshake
{
my $self = shift;
return unless $self->{"_C_HSHAKE"};
return if (@_);
return keys(%{$self->{"_L_HSHAKE"}});
}
sub is_baudrate
{
my $self = shift;
if (@_) {
return unless $self->{"_C_BAUD"};
return unless (defined $self->{"_L_BAUD"}{$_[0]});
$self->{"_N_BAUD"} = int shift;
update_DCB
($self);
}
return unless fetch_DCB
($self);
return $self->{BAUD
};
}
sub are_baudrate
{
my $self = shift;
return unless $self->{"_C_BAUD"};
return if (@_);
return keys(%{$self->{"_L_BAUD"}});
}
sub is_parity
{
my $self = shift;
if (@_) {
return unless $self->{"_C_PARITY_CFG"};
return unless (defined $self->{"_L_PARITY"}{$_[0]});
$self->{"_N_PARITY"} = $self->{"_L_PARITY"}{$_[0]};
update_DCB
($self);
}
return unless fetch_DCB
($self);
return $self->{PARITY
};
}
sub are_parity
{
my $self = shift;
return unless $self->{"_C_PARITY_CFG"};
return if (@_);
return keys(%{$self->{"_L_PARITY"}});
}
sub is_databits
{
my $self = shift;
if (@_) {
return unless $self->{"_C_DATA"};
return unless (defined $self->{"_L_DATA"}{$_[0]});
$self->{"_N_DATA"} = $self->{"_L_DATA"}{$_[0]};
update_DCB
($self);
}
return unless fetch_DCB
($self);
return $self->{DATA
};
}
sub are_databits
{
my $self = shift;
return unless $self->{"_C_DATA"};
return if (@_);
return keys(%{$self->{"_L_DATA"}});
}
sub is_stopbits
{
my $self = shift;
if (@_) {
return unless $self->{"_C_STOP"};
return unless (defined $self->{"_L_STOP"}{$_[0]});
$self->{"_N_STOP"} = $self->{"_L_STOP"}{$_[0]};
update_DCB
($self);
}
return unless fetch_DCB
($self);
return $self->{STOP
};
}
sub are_stopbits
{
my $self = shift;
return unless $self->{"_C_STOP"};
return if (@_);
return keys(%{$self->{"_L_STOP"}});
}
# single value for save/start
sub is_read_buf
{
my $self = shift;
if (@_) { $self->{"_N_READBUF"} = int shift; }
return $self->{READBUF
};
}
# single value for save/start
sub is_write_buf
{
my $self = shift;
if (@_) { $self->{"_N_WRITEBUF"} = int shift; }
return $self->{WRITEBUF
};
}
sub is_buffers
{
my $self = shift;
return unless (@_ == 2);
my $rbuf = shift;
my $wbuf = shift;
SetupComm
($self->{"_HANDLE"}, $rbuf, $wbuf) or return;
$self->{"_N_READBUF"} = 0;
$self->{"_N_WRITEBUF"} = 0;
$self->{READBUF
} = $rbuf;
$self->{WRITEBUF
} = $wbuf;
1;
}
sub read_bg
{
return unless (@_ == 2);
my $self = shift;
my $wanted = shift;
return unless ($wanted > 0);
if ($self->{"_R_BUSY"}) {
nocarp
or carp
"Second Read attempted before First is done";
return;
}
my $got_p = " "x4
;
my $ok;
my $got = 0;
if ($wanted > $RBUF_Size) {
$wanted = $RBUF_Size;
warn "read buffer limited to $RBUF_Size bytes at the moment";
}
$self->{"_R_BUSY"} = 1;
$ok=ReadFile
( $self->{"_HANDLE"},
$self->{"_RBUF"},
$wanted,
$got_p,
$self->{"_R_OVERLAP"});
if ($ok) {
$got = unpack("L", $got_p);
$self->{"_R_BUSY"} = 0;
}
return $got;
}
sub write_bg
{
return unless (@_ == 2);
my $self = shift;
my $wbuf = shift;
if ($self->{"_W_BUSY"}) {
nocarp
or carp
"Second Write attempted before First is done";
return;
}
my $ok;
my $got_p = " "x4
;
return 0 if ($wbuf eq "");
my $lbuf = length ($wbuf);
my $written = 0;
$self->{"_W_BUSY"} = 1;
$ok=WriteFile
( $self->{"_HANDLE"},
$wbuf,
$lbuf,
$got_p,
$self->{"_W_OVERLAP"});
if ($ok) {
$written = unpack("L", $got_p);
$self->{"_W_BUSY"} = 0;
}
if ($Babble) {
print "error=$ok\n";
print "wbuf=$wbuf\n";
print "lbuf=$lbuf\n";
print "write_bg=$written\n";
}
return $written;
}
sub read_done
{
return unless (@_ == 2);
my $self = shift;
my $wait = yes_true
( shift );
my $ov;
my $got_p = " "x4
;
my $wanted = 0;
$self->{"_R_BUSY"} = 1;
$ov=GetOverlappedResult
( $self->{"_HANDLE"},
$self->{"_R_OVERLAP"},
$got_p,
$wait);
if ($ov) {
$wanted = unpack("L", $got_p);
$self->{"_R_BUSY"} = 0;
print "read_done=$wanted\n" if ($Babble);
return (1, $wanted, substr($self->{"_RBUF"}, 0, $wanted));
}
return (0, 0, "");
}
sub write_done
{
return unless (@_ == 2);
my $self = shift;
my $wait = yes_true
( shift );
my $ov;
my $got_p = " "x4
;
my $written = 0;
$self->{"_W_BUSY"} = 1;
$ov=GetOverlappedResult
( $self->{"_HANDLE"},
$self->{"_W_OVERLAP"},
$got_p,
$wait);
if ($ov) {
$written = unpack("L", $got_p);
$self->{"_W_BUSY"} = 0;
print "write_done=$written\n" if ($Babble);
return (1, $written);
}
return (0, $written);
}
sub purge_all
{
my $self = shift;
return if (@_);
# PURGE_TXABORT | PURGE_RXABORT | PURGE_TXCLEAR | PURGE_RXCLEAR
unless ( PurgeComm
($self->{"_HANDLE"}, 0x0000000f
) ) {
carp
"Error in PurgeComm";
OS_Error
;
return;
}
$self->{"_R_BUSY"} = 0;
$self->{"_W_BUSY"} = 0;
return 1;
}
sub purge_rx
{
my $self = shift;
return if (@_);
# PURGE_RXABORT | PURGE_RXCLEAR
unless ( PurgeComm
($self->{"_HANDLE"}, 0x0000000a
) ) {
OS_Error
;
carp
"Error in PurgeComm";
return;
}
$self->{"_R_BUSY"} = 0;
return 1;
}
sub purge_tx
{
my $self = shift;
return if (@_);
# PURGE_TXABORT | PURGE_TXCLEAR
unless ( PurgeComm
($self->{"_HANDLE"}, 0x00000005
) ) {
OS_Error
;
carp
"Error in PurgeComm";
return;
}
$self->{"_W_BUSY"} = 0;
return 1;
}
sub are_buffers
{
my $self = shift;
return if (@_);
return ($self->{READBUF
}, $self->{WRITEBUF
});
}
sub buffer_max
{
my $self = shift;
return if (@_);
return ($self->{"_RBUFMAX"}, $self->{"_TBUFMAX"});
}
sub suspend_tx
{
my $self = shift;
return if (@_);
return SetCommBreak
($self->{"_HANDLE"});
}
sub resume_tx
{
my $self = shift;
return if (@_);
return ClearCommBreak
($self->{"_HANDLE"});
}
sub xmit_imm_char
{
my $self = shift;
return unless (@_ == 1);
my $v = int shift;
unless ( TransmitCommChar
($self->{"_HANDLE"}, $v) ) {
carp
"Can't transmit char: $v";
return;
}
1;
}
sub is_xon_char
{
my $self = shift;
if ((@_ == 1) and $self->{"_C_XON_CHAR"}) {
$self->{"_N_XONCHAR"} = 1 + shift;
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
return $self->{XONCHAR
};
}
sub is_xoff_char
{
my $self = shift;
if ((@_ == 1) and $self->{"_C_XON_CHAR"}) {
$self->{"_N_XOFFCHAR"} = 1 + shift;
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
return $self->{XOFFCHAR
};
}
sub is_eof_char
{
my $self = shift;
if ((@_ == 1) and $self->{"_C_SPECHAR"}) {
$self->{"_N_EOFCHAR"} = 1 + shift;
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
return $self->{EOFCHAR
};
}
sub is_event_char
{
my $self = shift;
if ((@_ == 1) and $self->{"_C_SPECHAR"}) {
$self->{"_N_EVTCHAR"} = 1 + shift;
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
return $self->{EVTCHAR
};
}
sub is_error_char
{
my $self = shift;
if ((@_ == 1) and $self->{"_C_SPECHAR"}) {
$self->{"_N_ERRCHAR"} = 1 + shift;
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
return $self->{ERRCHAR
};
}
sub is_xon_limit
{
my $self = shift;
if (@_) {
return unless ($self->{"_C_XONXOFF"});
my $v = int shift;
return if (($v < 0) or ($v > SHORTsize
));
$self->{"_N_XONLIM"} = ++$v;
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
return $self->{XONLIM
};
}
sub is_xoff_limit
{
my $self = shift;
if (@_) {
return unless ($self->{"_C_XONXOFF"});
my $v = int shift;
return if (($v < 0) or ($v > SHORTsize
));
$self->{"_N_XOFFLIM"} = ++$v;
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
return $self->{XOFFLIM
};
}
sub is_read_interval
{
my $self = shift;
if (@_) {
return unless ($self->{"_C_INT_TIME"});
my $v = int shift;
return if (($v < 0) or ($v > LONGsize
));
if ($v == LONGsize
) {
$self->{"_N_RINT"} = $v; # Win32 uses as flag
}
else {
$self->{"_N_RINT"} = ++$v;
}
return unless update_timeouts
($self);
}
return $self->{RINT
};
}
sub is_read_char_time
{
my $self = shift;
if (@_) {
return unless ($self->{"_C_TOT_TIME"});
my $v = int shift;
return if (($v < 0) or ($v >= LONGsize
));
$self->{"_N_RTOT"} = ++$v;
return unless update_timeouts
($self);
}
return $self->{RTOT
};
}
sub is_read_const_time
{
my $self = shift;
if (@_) {
return unless ($self->{"_C_TOT_TIME"});
my $v = int shift;
return if (($v < 0) or ($v >= LONGsize
));
$self->{"_N_RCONST"} = ++$v;
return unless update_timeouts
($self);
}
return $self->{RCONST
};
}
sub is_write_const_time
{
my $self = shift;
if (@_) {
return unless ($self->{"_C_TOT_TIME"});
my $v = int shift;
return if (($v < 0) or ($v >= LONGsize
));
$self->{"_N_WCONST"} = ++$v;
return unless update_timeouts
($self);
}
return $self->{WCONST
};
}
sub is_write_char_time
{
my $self = shift;
if (@_) {
return unless ($self->{"_C_TOT_TIME"});
my $v = int shift;
return if (($v < 0) or ($v >= LONGsize
));
$self->{"_N_WTOT"} = ++$v;
return unless update_timeouts
($self);
}
return $self->{WTOT
};
}
sub update_timeouts
{
return unless (@_ == 1);
my $self = shift;
unless ( GetCommTimeouts
($self->{"_HANDLE"}, $self->{"_TIMEOUT"}) ) {
carp
"Error in GetCommTimeouts";
return;
}
($self->{RINT
},
$self->{RTOT
},
$self->{RCONST
},
$self->{WTOT
},
$self->{WCONST
})= unpack($TIMEOUTformat, $self->{"_TIMEOUT"});
if ($self->{"_N_RINT"}) {
if ($self->{"_N_RINT"} == LONGsize
) {
$self->{RINT
} = $self->{"_N_RINT"}; # Win32 uses as flag
}
else {
$self->{RINT
} = $self->{"_N_RINT"} -1;
}
$self->{"_N_RINT"} = 0;
}
if ($self->{"_N_RTOT"}) {
$self->{RTOT
} = $self->{"_N_RTOT"} -1;
$self->{"_N_RTOT"} = 0;
}
if ($self->{"_N_RCONST"}) {
$self->{RCONST
} = $self->{"_N_RCONST"} -1;
$self->{"_N_RCONST"} = 0;
}
if ($self->{"_N_WTOT"}) {
$self->{WTOT
} = $self->{"_N_WTOT"} -1;
$self->{"_N_WTOT"} = 0;
}
if ($self->{"_N_WCONST"}) {
$self->{WCONST
} = $self->{"_N_WCONST"} -1;
$self->{"_N_WCONST"} = 0;
}
$self->{"_TIMEOUT"} = pack($TIMEOUTformat,
$self->{RINT
},
$self->{RTOT
},
$self->{RCONST
},
$self->{WTOT
},
$self->{WCONST
});
if ( SetCommTimeouts
($self->{"_HANDLE"}, $self->{"_TIMEOUT"}) ) {
return 1;
}
else {
carp
"Error in SetCommTimeouts";
return;
}
}
# true/false parameters
sub is_binary
{
my $self = shift;
if (@_) {
$self->{"_N_BINARY"} = 1 + yes_true
( shift );
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
### printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
return ($self->{"_BitMask"} & FM_fBinary
);
}
sub is_parity_enable
{
my $self = shift;
if (@_) {
$self->{"_N_PARITY_EN"} = 1 + yes_true
( shift );
update_DCB
($self);
}
return unless fetch_DCB
($self);
## printf "_BitMask=%lx\n", $self->{"_BitMask"}; ## DEBUG ##
return ($self->{"_BitMask"} & FM_fParity
);
}
sub ignore_null
{
my $self = shift;
if (@_) {
if ($self->{"_N_AUX_OFF"}) {
$self->{"_N_AUX_OFF"} &= ~FM_fNull
;
}
else {
$self->{"_N_AUX_OFF"} = ~FM_fNull
;
}
if ( yes_true
( shift ) ) {
$self->{"_N_AUX_ON"} |= FM_fNull
;
}
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
## printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
return ($self->{"_BitMask"} & FM_fNull
);
}
sub ignore_no_dsr
{
my $self = shift;
if (@_) {
if ($self->{"_N_AUX_OFF"}) {
$self->{"_N_AUX_OFF"} &= ~FM_fDsrSensitivity
;
}
else {
$self->{"_N_AUX_OFF"} = ~FM_fDsrSensitivity
;
}
if ( yes_true
( shift ) ) {
$self->{"_N_AUX_ON"} |= FM_fDsrSensitivity
;
}
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
## printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
return ($self->{"_BitMask"} & FM_fDsrSensitivity
);
}
sub subst_pe_char
{
my $self = shift;
if (@_) {
if ($self->{"_N_AUX_OFF"}) {
$self->{"_N_AUX_OFF"} &= ~FM_fErrorChar
;
}
else {
$self->{"_N_AUX_OFF"} = ~FM_fErrorChar
;
}
if ( yes_true
( shift ) ) {
$self->{"_N_AUX_ON"} |= FM_fErrorChar
;
}
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
## printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
return ($self->{"_BitMask"} & FM_fErrorChar
);
}
sub abort_on_error
{
my $self = shift;
if (@_) {
if ($self->{"_N_AUX_OFF"}) {
$self->{"_N_AUX_OFF"} &= ~FM_fAbortOnError
;
}
else {
$self->{"_N_AUX_OFF"} = ~FM_fAbortOnError
;
}
if ( yes_true
( shift ) ) {
$self->{"_N_AUX_ON"} |= FM_fAbortOnError
;
}
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
## printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
return ($self->{"_BitMask"} & FM_fAbortOnError
);
}
sub output_dsr
{
my $self = shift;
if (@_) {
if ($self->{"_N_AUX_OFF"}) {
$self->{"_N_AUX_OFF"} &= ~FM_fOutxDsrFlow
;
}
else {
$self->{"_N_AUX_OFF"} = ~FM_fOutxDsrFlow
;
}
if ( yes_true
( shift ) ) {
$self->{"_N_AUX_ON"} |= FM_fOutxDsrFlow
;
}
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
## printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
return ($self->{"_BitMask"} & FM_fOutxDsrFlow
);
}
sub output_cts
{
my $self = shift;
if (@_) {
if ($self->{"_N_AUX_OFF"}) {
$self->{"_N_AUX_OFF"} &= ~FM_fOutxCtsFlow
;
}
else {
$self->{"_N_AUX_OFF"} = ~FM_fOutxCtsFlow
;
}
if ( yes_true
( shift ) ) {
$self->{"_N_AUX_ON"} |= FM_fOutxCtsFlow
;
}
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
## printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
return ($self->{"_BitMask"} & FM_fOutxCtsFlow
);
}
sub input_xoff
{
my $self = shift;
if (@_) {
if ($self->{"_N_AUX_OFF"}) {
$self->{"_N_AUX_OFF"} &= ~FM_fInX
;
}
else {
$self->{"_N_AUX_OFF"} = ~FM_fInX
;
}
if ( yes_true
( shift ) ) {
$self->{"_N_AUX_ON"} |= FM_fInX
;
}
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
## printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
return ($self->{"_BitMask"} & FM_fInX
);
}
sub output_xoff
{
my $self = shift;
if (@_) {
if ($self->{"_N_AUX_OFF"}) {
$self->{"_N_AUX_OFF"} &= ~FM_fOutX
;
}
else {
$self->{"_N_AUX_OFF"} = ~FM_fOutX
;
}
if ( yes_true
( shift ) ) {
$self->{"_N_AUX_ON"} |= FM_fOutX
;
}
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
## printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
return ($self->{"_BitMask"} & FM_fOutX
);
}
sub tx_on_xoff
{
my $self = shift;
if (@_) {
if ($self->{"_N_AUX_OFF"}) {
$self->{"_N_AUX_OFF"} &= ~FM_fTXContinueOnXoff
;
}
else {
$self->{"_N_AUX_OFF"} = ~FM_fTXContinueOnXoff
;
}
if ( yes_true
( shift ) ) {
$self->{"_N_AUX_ON"} |= FM_fTXContinueOnXoff
;
}
update_DCB
($self);
}
else {
return unless fetch_DCB
($self);
}
## printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
return ($self->{"_BitMask"} & FM_fTXContinueOnXoff
);
}
sub dtr_active
{
return unless (@_ == 2);
my $self = shift;
my $onoff = yes_true
( shift ) ? SETDTR
: CLRDTR
;
return EscapeCommFunction
($self->{"_HANDLE"}, $onoff);
}
sub rts_active
{
return unless (@_ == 2);
my $self = shift;
my $onoff = yes_true
( shift ) ? SETRTS
: CLRRTS
;
return EscapeCommFunction
($self->{"_HANDLE"}, $onoff);
}
# pulse parameters
sub pulse_dtr_off
{
return unless (@_ == 2);
if ( ($] < 5.005) and ($] >= 5.004) ) {
nocarp
or carp
"\npulse_dtr_off not supported on version $]\n";
return;
}
my $self = shift;
my $delay = shift;
$self->dtr_active(0) or carp
"Did not pulse DTR off";
Win32
::Sleep($delay);
$self->dtr_active(1) or carp
"Did not restore DTR on";
Win32
::Sleep($delay);
}
sub pulse_rts_off
{
return unless (@_ == 2);
if ( ($] < 5.005) and ($] >= 5.004) ) {
nocarp
or carp
"\npulse_rts_off not supported on version $]\n";
return;
}
my $self = shift;
my $delay = shift;
$self->rts_active(0) or carp
"Did not pulse RTS off";
Win32
::Sleep($delay);
$self->rts_active(1) or carp
"Did not restore RTS on";
Win32
::Sleep($delay);
}
sub pulse_break_on
{
return unless (@_ == 2);
if ( ($] < 5.005) and ($] >= 5.004) ) {
nocarp
or carp
"\npulse_break_on not supported on version $]\n";
return;
}
my $self = shift;
my $delay = shift;
$self->break_active(1) or carp
"Did not pulse BREAK on";
Win32
::Sleep($delay);
$self->break_active(0) or carp
"Did not restore BREAK off";
Win32
::Sleep($delay);
}
sub pulse_dtr_on
{
return unless (@_ == 2);
if ( ($] < 5.005) and ($] >= 5.004) ) {
nocarp
or carp
"\npulse_dtr_on not supported on version $]\n";
return;
}
my $self = shift;
my $delay = shift;
$self->dtr_active(1) or carp
"Did not pulse DTR on";
Win32
::Sleep($delay);
$self->dtr_active(0) or carp
"Did not restore DTR off";
Win32
::Sleep($delay);
}
sub pulse_rts_on
{
return unless (@_ == 2);
if ( ($] < 5.005) and ($] >= 5.004) ) {
nocarp
or carp
"\npulse_rts_on not supported on version $]\n";
return;
}
my $self = shift;
my $delay = shift;
$self->rts_active(1) or carp
"Did not pulse RTS on";
Win32
::Sleep($delay);
$self->rts_active(0) or carp
"Did not restore RTS off";
Win32
::Sleep($delay);
}
sub break_active
{
return unless (@_ == 2);
my $self = shift;
my $onoff = yes_true
( shift ) ? SETBREAK
: CLRBREAK
;
return EscapeCommFunction
($self->{"_HANDLE"}, $onoff);
}
sub xon_active
{
return unless (@_ == 1);
my $self = shift;
return EscapeCommFunction
($self->{"_HANDLE"}, SETXON
);
}
sub xoff_active
{
return unless (@_ == 1);
my $self = shift;
return EscapeCommFunction
($self->{"_HANDLE"}, SETXOFF
);
}
sub is_modemlines
{
return unless (@_ == 1);
my $self = shift;
my $mstat = " " x4
;
unless ( GetCommModemStatus
($self->{"_HANDLE"}, $mstat) ) {
carp
"Error in GetCommModemStatus";
return;
}
my $result = unpack ("L", $mstat);
return $result;
}
sub debug_comm
{
my $self = shift;
if (ref($self)) {
if (@_) { $self->{"_DEBUG_C"} = yes_true
( shift ); }
else {
nocarp
or carp
"Debug level: $self->{NAME} = $self->{\"_DEBUG_C\"}";
return $self->{"_DEBUG_C"};
}
} else {
$Babble = yes_true
($self);
nocarp
or carp
"CommPort Debug Class = $Babble";
return $Babble;
}
}
sub close {
my $self = shift;
my $ok;
my $success = 1;
return unless (defined $self->{NAME
});
if ($Babble) {
carp
"Closing $self " . $self->{NAME
};
}
if ($self->{"_HANDLE"}) {
purge_all
($self);
update_timeouts
($self); # if any running ??
$ok=CloseHandle
($self->{"_HANDLE"});
if (! $ok) {
print "Error Closing handle $self->{\"_HANDLE\"} for $self->{NAME}\n";
OS_Error
;
$success = 0;
}
elsif ($Babble) {
print "Closing Device handle $self->{\"_HANDLE\"} for $self->{NAME}\n";
}
$self->{"_HANDLE"} = undef;
}
if ($self->{"_R_EVENT"}) {
$ok=CloseHandle
($self->{"_R_EVENT"});
if (! $ok) {
print "Error closing Read Event handle $self->{\"_R_EVENT\"} for $self->{NAME}\n";
OS_Error
;
$success = 0;
}
$self->{"_R_EVENT"} = undef;
}
if ($self->{"_W_EVENT"}) {
$ok=CloseHandle
($self->{"_W_EVENT"});
if (! $ok) {
print "Error closing Write Event handle $self->{\"_W_EVENT\"} for $self->{NAME}\n";
OS_Error
;
$success = 0;
}
$self->{"_W_EVENT"} = undef;
}
$self->{NAME
} = undef;
if ($Babble) {
printf "CommPort close result:%d\n", $success;
}
return $success;
}
sub DESTROY
{
my $self = shift;
return unless (defined $self->{NAME
});
if ($Babble or $self->{"_DEBUG_C"}) {
print "Destroying $self->{NAME}\n" if (defined $self->{NAME
});
}
$self->close;
}
1; # so the require or use succeeds
# Autoload methods go after =cut, and are processed by the autosplit program.
__END__
=pod
=head1 NAME
Win32API::CommPort - Raw Win32 system API calls for serial communications.
=head1 SYNOPSIS
use Win32; ## not required under all circumstances
require 5.003;
use Win32API::CommPort qw( :PARAM :STAT 0.19 );
## when available ## use Win32API::File 0.07 qw( :ALL );
=head2 Constructors
$PortObj = new Win32API::CommPort ($PortName, $quiet)
|| die "Can't open $PortName: $^E\n"; # $quiet is optional
@required = qw( BAUD DATA STOP );
$faults = $PortObj->initialize(@required);
if ($faults) { die "Required parameters not set before initialize\n"; }
=head2 Configuration Utility Methods
set_no_messages(1); # test suite use
# exported by :PARAM
nocarp || carp "Something fishy";
$a = SHORTsize; # 0xffff
$a = LONGsize; # 0xffffffff
$answer = yes_true("choice"); # 1 or 0
OS_Error unless ($API_Call_OK); # prints error
$PortObj->init_done || die "Not done";
$PortObj->fetch_DCB || die "Not done";
$PortObj->update_DCB || die "Not done";
$milliseconds = $PortObj->get_tick_count;
=head2 Capability Methods (read only)
# true/false capabilities
$a = $PortObj->can_baud; # else fixed
$a = $PortObj->can_databits;
$a = $PortObj->can_stopbits;
$a = $PortObj->can_dtrdsr;
$a = $PortObj->can_handshake;
$a = $PortObj->can_parity_check;
$a = $PortObj->can_parity_config;
$a = $PortObj->can_parity_enable;
$a = $PortObj->can_rlsd; # receive line signal detect (carrier)
$a = $PortObj->can_rlsd_config;
$a = $PortObj->can_16bitmode;
$a = $PortObj->is_rs232;
$a = $PortObj->is_modem;
$a = $PortObj->can_rtscts;
$a = $PortObj->can_xonxoff;
$a = $PortObj->can_xon_char;
$a = $PortObj->can_spec_char;
$a = $PortObj->can_interval_timeout;
$a = $PortObj->can_total_timeout;
# list output capabilities
($rmax, $wmax) = $PortObj->buffer_max;
($rbuf, $wbuf) = $PortObj->are_buffers; # current
@choices = $PortObj->are_baudrate; # legal values
@choices = $PortObj->are_handshake;
@choices = $PortObj->are_parity;
@choices = $PortObj->are_databits;
@choices = $PortObj->are_stopbits;
=head2 Configuration Methods
# most methods can be called two ways:
$PortObj->is_handshake("xoff"); # set parameter
$flowcontrol = $PortObj->is_handshake; # current value (scalar)
# similar
$PortObj->is_baudrate(9600);
$PortObj->is_parity("odd");
$PortObj->is_databits(8);
$PortObj->is_stopbits(1);
$PortObj->debug_comm(0);
$PortObj->is_xon_limit(100); # bytes left in buffer
$PortObj->is_xoff_limit(100); # space left in buffer
$PortObj->is_xon_char(0x11);
$PortObj->is_xoff_char(0x13);
$PortObj->is_eof_char(0x0);
$PortObj->is_event_char(0x0);
$PortObj->is_error_char(0); # for parity errors
$rbuf = $PortObj->is_read_buf; # read_only except internal use
$wbuf = $PortObj->is_write_buf;
$size = $PortObj->internal_buffer;
$PortObj->is_buffers(4096, 4096); # read, write
# returns current in list context
$PortObj->is_read_interval(100); # max time between read char (millisec)
$PortObj->is_read_char_time(5); # avg time between read char
$PortObj->is_read_const_time(100); # total = (avg * bytes) + const
$PortObj->is_write_char_time(5);
$PortObj->is_write_const_time(100);
$PortObj->is_binary(T); # just say Yes (Win 3.x option)
$PortObj->is_parity_enable(F); # faults during input
=head2 Operating Methods
($BlockingFlags, $InBytes, $OutBytes, $LatchErrorFlags) = $PortObj->is_status
|| warn "could not get port status\n";
$ClearedErrorFlags = $PortObj->reset_error;
# The API resets errors when reading status, $LatchErrorFlags
# is all $ErrorFlags since they were last explicitly cleared
if ($BlockingFlags) { warn "Port is blocked"; }
if ($BlockingFlags & BM_fCtsHold) { warn "Waiting for CTS"; }
if ($LatchErrorFlags & CE_FRAME) { warn "Framing Error"; }
Additional useful constants may be exported eventually.
$count_in = $PortObj->read_bg($InBytes);
($done, $count_in, $string_in) = $PortObj->read_done(1);
# background read with wait until done
$count_out = $PortObj->write_bg($output_string); # background write
($done, $count_out) = $PortObj->write_done(0);
$PortObj->suspend_tx; # output from write buffer
$PortObj->resume_tx;
$PortObj->xmit_imm_char(0x03); # bypass buffer (and suspend)
$PortObj->xoff_active; # simulate received xoff
$PortObj->xon_active; # simulate received xon
$PortObj->purge_all;
$PortObj->purge_rx;
$PortObj->purge_tx;
# controlling outputs from the port
$PortObj->dtr_active(T); # sends outputs direct to hardware
$PortObj->rts_active(Yes); # returns status of API call
$PortObj->break_active(N); # NOT state of bit
$PortObj->pulse_break_on($milliseconds); # off version is implausible
$PortObj->pulse_rts_on($milliseconds);
$PortObj->pulse_rts_off($milliseconds);
$PortObj->pulse_dtr_on($milliseconds);
$PortObj->pulse_dtr_off($milliseconds);
# sets_bit, delays, resets_bit, delays
# pulse_xxx methods not supported on Perl 5.004
$ModemStatus = $PortObj->is_modemlines;
if ($ModemStatus & $PortObj->MS_RLSD_ON) { print "carrier detected"; }
$PortObj->close || die;
# "undef $PortObj" preferred unless reopening port
# "close" should precede "undef" if both used
=head1 DESCRIPTION
This provides fairly low-level access to the Win32 System API calls
dealing with serial ports.
Uses features of the Win32 API to implement non-blocking I/O, serial
parameter setting, event-loop operation, and enhanced error handling.
To pass in C<NULL> as the pointer to an optional buffer, pass in C<$null=0>.
This is expected to change to an empty list reference, C<[]>, when Perl
supports that form in this usage.
Beyond raw access to the API calls and related constants, this module
will eventually handle smart buffer allocation and translation of return
codes.
=head2 Initialization
The constructor is B<new> with a F<PortName> (as the Registry
knows it) specified. This will do a B<CreateFile>, get the available
options and capabilities via the Win32 API, and create the object.
The port is not yet ready for read/write access. First, the desired
I<parameter settings> must be established. Since these are tuning
constants for an underlying hardware driver in the Operating System,
they should all checked for validity by the method calls that set them.
The B<initialize> method takes a list of required parameters and confirms
they have been set. For others, it will attempt to deduce defaults from
the hardware or from other parameters. The B<initialize> method returns
the number of faults (zero if the port is setup ok). The B<update_DCB>
method writes a new I<Device Control Block> to complete the startup and
allow the port to be used. Ports are opened for binary transfers. A
separate C<binmode> is not needed. The USER must release the object
if B<initialize> or B<update_DCB> does not succeed.
Version 0.15 adds an optional C<$quiet> parameter to B<new>. Failure
to open a port prints a error message to STDOUT by default. Since only
one application at a time can "own" the port, one source of failure was
"port in use". There was previously no way to check this without getting
a "fail message". Setting C<$quiet> disables this built-in message. It
also returns 0 instead of C<undef> if the port is unavailable (still FALSE,
used for testing this condition - other faults may still return C<undef>).
Use of C<$quiet> only applies to B<new>.
The fault checking in B<initialize> consists in verifying an I<_N_$item>
internal variable exists for each I<$item> in the input list. The
I<_N_$item> is created for each parameter that is set either directly
or by default. A derived class must create the I<_N_$items> for any
varibles it adds to the base class if it wants B<initialize> to check
them. Win32API::CommPort supports the following:
$item _N_$item setting method
------ --------- --------------
BAUD "_N_BAUD" is_baudrate
BINARY "_N_BINARY" is_binary
DATA "_N_DATA" is_databits
EOFCHAR "_N_EOFCHAR" is_eof_char
ERRCHAR "_N_ERRCHAR" is_error_char
EVTCHAR "_N_EVTCHAR" is_event_char
HSHAKE "_N_HSHAKE" is_handshake
PARITY "_N_PARITY" is_parity
PARITY_EN "_N_PARITY_EN" is_parity_enable
RCONST "_N_RCONST" is_read_const_time
READBUF "_N_READBUF" is_read_buf
RINT "_N_RINT" is_read_interval
RTOT "_N_RTOT" is_read_char_time
STOP "_N_STOP" is_stopbits
WCONST "_N_WCONST" is_write_const_time
WRITEBUF "_N_WRITEBUF" is_write_buf
WTOT "_N_WTOT" is_write_char_time
XOFFCHAR "_N_XOFFCHAR" is_xoff_char
XOFFLIM "_N_XOFFLIM" is_xoff_limit
XONCHAR "_N_XONCHAR" is_xon_char
XONLIM "_N_XONLIM" is_xon_limit
Some individual parameters (eg. baudrate) can be changed after the
initialization is completed. These will automatically update the
I<Device Control Block> as required. The I<init_done> method indicates
when I<initialize> has completed successfully.
$PortObj = new Win32API::CommPort ($PortName, $quiet)
|| die "Can't open $PortName: $^E\n"; # $quiet is optional
if $PortObj->can_databits { $PortObj->is_databits(8) };
$PortObj->is_baudrate(9600);
$PortObj->is_parity("none");
$PortObj->is_stopbits(1);
$PortObj->is_handshake("rts");
$PortObj->is_buffers(4096, 4096);
$PortObj->dtr_active(T);
@required = qw( BAUD DATA STOP PARITY );
$PortObj->initialize(@required) || undef $PortObj;
$PortObj->dtr_active(f);
$PortObj->is_baudrate(300);
$PortObj->close || die;
# "undef $PortObj" preferred unless reopening port
# "close" should precede "undef" if both used
undef $PortObj; # closes port AND frees memory in perl
The F<PortName> maps to both the Registry I<Device Name> and the
I<Properties> associated with that device. A single I<Physical> port
can be accessed using two or more I<Device Names>. But the options
and setup data will differ significantly in the two cases. A typical
example is a Modem on port "COM2". Both of these F<PortNames> open
the same I<Physical> hardware:
$P1 = new Win32API::CommPort ("COM2");
$P2 = new Win32API::CommPort ("\\\\.\\Nanohertz Modem model K-9");
$P1 is a "generic" serial port. $P2 includes all of $P1 plus a variety
of modem-specific added options and features. The "raw" API calls return
different size configuration structures in the two cases. Win32 uses the
"\\.\" prefix to identify "named" devices. Since both names use the same
I<Physical> hardware, they can not both be used at the same time. The OS
will complain. Consider this A Good Thing.
Version 0.16 adds B<pulse> methods for the I<RTS, BREAK, and DTR> bits. The
B<pulse> methods assume the bit is in the opposite state when the method
is called. They set the requested state, delay the specified number of
milliseconds, set the opposite state, and again delay the specified time.
These methods are designed to support devices, such as the X10 "FireCracker"
control and some modems, which require pulses on these lines to signal
specific events or data. Since the 5.00402 Perl distribution from CPAN does
not support sub-second time delays readily, these methods are not supported
on that version of Perl.
$PortObj->pulse_break_on($milliseconds);
$PortObj->pulse_rts_on($milliseconds);
$PortObj->pulse_rts_off($milliseconds);
$PortObj->pulse_dtr_on($milliseconds);
$PortObj->pulse_dtr_off($milliseconds);
Version 0.16 also adds I<experimental> support for the rest of the option bits
available through the I<Device Control Block>. They have not been extensively
tested and these settings are NOT saved in the B<configuration file> by
I<Win32::SerialPort>. Please let me know if one does not work as advertised.
[Win32 API bit designation]
$PortObj->ignore_null(0); # discard \000 bytes on input [fNull]
$PortObj->ignore_no_dsr(0); # discard input bytes unless DSR
# [fDsrSensitivity]
$PortObj->subst_pe_char(0); # replace parity errors with B<is_error_char>
# when B<is_parity_enable> [fErrorChar]
$PortObj->abort_on_error(0); # cancel read/write [fAbortOnError]
# next one set by $PortObj->is_handshake("dtr");
$PortObj->output_dsr(0); # use DSR handshake on output [fOutxDsrFlow]
# next one set by $PortObj->is_handshake("rts");
$PortObj->output_cts(0); # use CTS handshake on output [fOutxCtsFlow]
# next two set by $PortObj->is_handshake("xoff");
$PortObj->input_xoff(0); # use Xon/Xoff handshake on input [fInX]
$PortObj->output_xoff(0); # use Xon/Xoff handshake on output [fOutX]
$PortObj->tx_on_xoff(0); # continue output even after input xoff sent
# [fTXContinueOnXoff]
The B<get_tick_count> method is a wrapper around the I<Win32::GetTickCount()>
function. It matches a corresponding method in I<Device::SerialPort> which
does not have access to the I<Win32::> namespace. It still returns time
in milliseconds - but can be used in cross-platform scripts.
=head2 Configuration and Capability Methods
The Win32 Serial Comm API provides extensive information concerning
the capabilities and options available for a specific port (and
instance). "Modem" ports have different capabilties than "RS-232"
ports - even if they share the same Hardware. Many traditional modem
actions are handled via TAPI. "Fax" ports have another set of options -
and are accessed via MAPI. Yet many of the same low-level API commands
and data structures are "common" to each type ("Modem" is implemented
as an "RS-232" superset). In addition, Win95 supports a variety of
legacy hardware (e.g fixed 134.5 baud) while WinNT has hooks for ISDN,
16-data-bit paths, and 256Kbaud.
=over 8
Binary selections will accept as I<true> any of the following:
C<("YES", "Y", "ON", "TRUE", "T", "1", 1)> (upper/lower/mixed case)
Anything else is I<false>.
There are a large number of possible configuration and option parameters.
To facilitate checking option validity in scripts, most configuration
methods can be used in two different ways:
=item method called with an argument
The parameter is set to the argument, if valid. An invalid argument
returns I<false> (undef) and the parameter is unchanged. After B<init_done>,
the port will be updated immediately if allowed. Otherwise, the value
will be applied when B<update_DCB> is called.
=item method called with no argument in scalar context
The current value is returned. If the value is not initialized either
directly or by default, return "undef" which will parse to I<false>.
For binary selections (true/false), return the current value. All
current values from "multivalue" selections will parse to I<true>.
Current values may differ from requested values until B<init_done>.
There is no way to see requests which have not yet been applied.
Setting the same parameter again overwrites the first request. Test
the return value of the setting method to check "success".
=item Asynchronous (Background) I/O
This version now handles Polling (do if Ready), Synchronous (block until
Ready), and Asynchronous Modes (begin and test if Ready) with the timeout
choices provided by the API. No effort has yet been made to interact with
Windows events. But background I/O has been used successfully with the
Perl Tk modules and callbacks from the event loop.
=item Timeouts
The API provides two timing models. The first applies only to reading and
essentially determines I<Read Not Ready> by checking the time between
consecutive characters. The B<ReadFile> operation returns if that time
exceeds the value set by B<is_read_interval>. It does this by timestamping
each character. It appears that at least one character must by received in
I<every> B<read> I<call to the API> to initialize the mechanism. The timer
is then reset by each succeeding character. If no characters are received,
the read will block indefinitely.
Setting B<is_read_interval> to C<0xffffffff> will do a non-blocking read.
The B<ReadFile> returns immediately whether or not any characters are
actually read. This replicates the behavior of the API.
The other model defines the total time allowed to complete the operation.
A fixed overhead time is added to the product of bytes and per_byte_time.
A wide variety of timeout options can be defined by selecting the three
parameters: fixed, each, and size.
Read_Total = B<is_read_const_time> + (B<is_read_char_time> * bytes_to_read)
Write_Total = B<is_write_const_time> + (B<is_write_char_time> * bytes_to_write)
When reading a known number of characters, the I<Read_Total> mechanism is
recommended. This mechanism I<MUST> be used with
I<Win32::SerialPort tied FileHandles> because the tie methods can make
multiple internal API calls. The I<Read_Interval> mechanism is suitable for
a B<read_bg> method that expects a response of variable or unknown size. You
should then also set a long I<Read_Total> timeout as a "backup" in case
no bytes are received.
=back
=head2 Exports
Nothing is exported by default. The following tags can be used to have
large sets of symbols exported:
=over 4
=item :PARAM
Utility subroutines and constants for parameter setting and test:
LONGsize SHORTsize nocarp yes_true
OS_Error internal_buffer
=item :STAT
Serial communications status constants. Included are the constants for
ascertaining why a transmission is blocked:
BM_fCtsHold BM_fDsrHold BM_fRlsdHold BM_fXoffHold
BM_fXoffSent BM_fEof BM_fTxim BM_AllBits
Which incoming bits are active:
MS_CTS_ON MS_DSR_ON MS_RING_ON MS_RLSD_ON
What hardware errors have been detected:
CE_RXOVER CE_OVERRUN CE_RXPARITY CE_FRAME
CE_BREAK CE_TXFULL CE_MODE
Offsets into the array returned by B<status:>
ST_BLOCK ST_INPUT ST_OUTPUT ST_ERROR
=item :RAW
The constants and wrapper methods for low-level API calls. Details of
these methods may change with testing. Some may be inherited from
Win32API::File when that becomes available.
$result=ClearCommError($handle, $Error_BitMask_p, $CommStatus);
$result=ClearCommBreak($handle);
$result=SetCommBreak($handle);
$result=GetCommModemStatus($handle, $ModemStatus);
$result=GetCommProperties($handle, $CommProperties);
$result=GetCommState($handle, $DCB_Buffer);
$result=SetCommState($handle, $DCB_Buffer);
$result=SetupComm($handle, $in_buf_size, $out_buf_size);
$result=ReadFile($handle, $buffer, $wanted, $got, $template);
$result=WriteFile($handle, $buffer, $size, $count, $template);
$result=GetCommTimeouts($handle, $CommTimeOuts);
$result=SetCommTimeouts($handle, $CommTimeOuts);
$result=EscapeCommFunction($handle, $Func_ID);
$result=GetCommConfig($handle, $CommConfig, $Size);
$result=SetCommConfig($handle, $CommConfig, $Size);
$result=PurgeComm($handle, $flags);
$result=GetCommMask($handle, $Event_Bitmask);
$result=SetCommMask($handle, $Event_Bitmask);
$hEvent=CreateEvent($security, $reset_req, $initial, $name);
$handle=CreateFile($file, $access, $share, $security,
$creation, $flags, $template);
$result=CloseHandle($handle);
$result=ResetEvent($hEvent);
$result=TransmitCommChar($handle, $char);
$result=WaitCommEvent($handle, $Event_Bitmask, $lpOverlapped);
$result=GetOverlappedResult($handle, $lpOverlapped, $count, $bool);
Flags used by B<PurgeComm:>
PURGE_TXABORT PURGE_RXABORT PURGE_TXCLEAR PURGE_RXCLEAR
Function IDs used by EscapeCommFunction:
SETXOFF SETXON SETRTS CLRRTS
SETDTR CLRDTR SETBREAK CLRBREAK
Events used by B<WaitCommEvent:>
EV_RXCHAR EV_RXFLAG EV_TXEMPTY EV_CTS
EV_DSR EV_RLSD EV_BREAK EV_ERR
EV_RING EV_PERR EV_RX80FULL EV_EVENT1
EV_EVENT2
Errors specific to B<GetOverlappedResult:>
ERROR_IO_INCOMPLETE ERROR_IO_PENDING
=item :COMMPROP
The constants for the I<CommProperties structure> returned by
B<GetCommProperties>. Included mostly for completeness.
BAUD_USER BAUD_075 BAUD_110 BAUD_134_5
BAUD_150 BAUD_300 BAUD_600 BAUD_1200
BAUD_1800 BAUD_2400 BAUD_4800 BAUD_7200
BAUD_9600 BAUD_14400 BAUD_19200 BAUD_38400
BAUD_56K BAUD_57600 BAUD_115200 BAUD_128K
PST_FAX PST_LAT PST_MODEM PST_PARALLELPORT
PST_RS232 PST_RS422 PST_X25 PST_NETWORK_BRIDGE
PST_RS423 PST_RS449 PST_SCANNER PST_TCPIP_TELNET
PST_UNSPECIFIED
PCF_INTTIMEOUTS PCF_PARITY_CHECK PCF_16BITMODE
PCF_DTRDSR PCF_SPECIALCHARS PCF_RLSD
PCF_RTSCTS PCF_SETXCHAR PCF_TOTALTIMEOUTS
PCF_XONXOFF
SP_BAUD SP_DATABITS SP_HANDSHAKING SP_PARITY
SP_RLSD SP_STOPBITS SP_SERIALCOMM SP_PARITY_CHECK
DATABITS_5 DATABITS_6 DATABITS_7 DATABITS_8
DATABITS_16 DATABITS_16X
STOPBITS_10 STOPBITS_15 STOPBITS_20
PARITY_SPACE PARITY_NONE PARITY_ODD PARITY_EVEN
PARITY_MARK
COMMPROP_INITIALIZED
=item :DCB
The constants for the I<Device Control Block> returned by B<GetCommState>
and updated by B<SetCommState>. Again, included mostly for completeness.
But there are some combinations of "FM_f" settings which are not currently
supported by high-level commands. If you need one of those, please report
the lack as a bug.
CBR_110 CBR_300 CBR_600 CBR_1200
CBR_2400 CBR_4800 CBR_9600 CBR_14400
CBR_19200 CBR_38400 CBR_56000 CBR_57600
CBR_115200 CBR_128000 CBR_256000
DTR_CONTROL_DISABLE DTR_CONTROL_ENABLE DTR_CONTROL_HANDSHAKE
RTS_CONTROL_DISABLE RTS_CONTROL_ENABLE RTS_CONTROL_HANDSHAKE
RTS_CONTROL_TOGGLE
EVENPARITY MARKPARITY NOPARITY ODDPARITY
SPACEPARITY
ONESTOPBIT ONE5STOPBITS TWOSTOPBITS
FM_fBinary FM_fParity FM_fOutxCtsFlow
FM_fOutxDsrFlow FM_fDtrControl FM_fDsrSensitivity
FM_fTXContinueOnXoff FM_fOutX FM_fInX
FM_fErrorChar FM_fNull FM_fRtsControl
FM_fAbortOnError FM_fDummy2
=item :ALL
All of the above. Except for the I<test suite>, there is not really a good
reason to do this.
=back
=head1 NOTES
The object returned by B<new> is NOT a I<Filehandle>. You
will be disappointed if you try to use it as one.
e.g. the following is WRONG!!____C<print $PortObj "some text";>
I<Win32::SerialPort> supports accessing ports via I<Tied Filehandles>.
An important note about Win32 filenames. The reserved device names such
as C< COM1, AUX, LPT1, CON, PRN > can NOT be used as filenames. Hence
I<"COM2.cfg"> would not be usable for B<$Configuration_File_Name>.
This module uses Win32::API extensively. The raw API calls are B<very>
unforgiving. You will certainly want to start perl with the B<-w> switch.
If you can, B<use strict> as well. Try to ferret out all the syntax and
usage problems BEFORE issuing the API calls (many of which modify tuning
constants in hardware device drivers....not where you want to look for bugs).
Thanks to Ken White for testing on NT.
=head1 KNOWN LIMITATIONS
The current version of the module has been designed for testing using
the ActiveState and Core (GS 5.004_02) ports of Perl for Win32 without
requiring a compiler or using XS. In every case, compatibility has been
selected over performance. Since everything is (sometimes convoluted but
still pure) Perl, you can fix flaws and change limits if required. But
please file a bug report if you do. This module has been tested with
each of the binary perl versions for which Win32::API is supported: AS
builds 315, 316, and 500-509 and GS 5.004_02. It has only been tested on
Intel hardware.
=over 4
=item Tutorial
With all the options, this module needs a good tutorial. It doesn't
have a complete one yet. A I<"How to get started"> tutorial appeared
B<The Perl Journal #13> (March 1999). The demo programs are a good
starting point for additional examples.
=item Buffers
The size of the Win32 buffers are selectable with B<is_buffers>. But each read
method currently uses a fixed internal buffer of 4096 bytes. This can be
changed in the module source. The read-only B<internal_buffer> method will
give the current size. There are other fixed internal buffers as well. But
no one has needed to change those. The XS version will support dynamic buffer
sizing.
=item Modems
Lots of modem-specific options are not supported. The same is true of
TAPI, MAPI. I<API Wizards> are welcome to contribute.
=item API Options
Lots of options are just "passed through from the API". Some probably
shouldn't be used together. The module validates the obvious choices when
possible. For something really fancy, you may need additional API
documentation. Available from I<Micro$oft Pre$$>.
=back
=head1 BUGS
ActiveState ports of Perl for Win32 before build 500 do not support the
tools for building extensions and so will not support later versions of
this extension. In particular, the automated install and test scripts in
this distribution work differently with ActiveState builds 3xx.
There is no parameter checking on the "raw" API calls. You probably should
be familiar with using the calls in "C" before doing much experimenting.
On Win32, a port must B<close> before it can be reopened again by the same
process. If a physical port can be accessed using more than one name (see
above), all names are treated as one. The perl script can also be run
multiple times within a single batch file or shell script. The I<Makefile.PL>
spawns subshells with backticks to run the test suite on Perl 5.003 - ugly,
but it works.
On NT, a B<read_done> or B<write_done> returns I<False> if a background
operation is aborted by a purge. Win95 returns I<True>.
EXTENDED_OS_ERROR ($^E) is not supported by the binary ports before 5.005.
It "sort-of-tracks" B<$!> in 5.003 and 5.004, but YMMV.
A few NT systems seem to set B<can_parity_enable> true, but do not actually
support setting B<is_parity_enable>. This may be a characteristic of certain
third-party serial drivers. Or a Microsoft bug. I have not been able to
reproduce it on my system.
__Please send comments and bug reports to wcbirthisel@alum.mit.edu.
=head1 AUTHORS
Bill Birthisel, wcbirthisel@alum.mit.edu, http://members.aol.com/Bbirthisel/.
Tye McQueen, tye@metronet.com, http://www.metronet.com/~tye/.
=head1 SEE ALSO
Wi32::SerialPort - High-level user interface/front-end for this module
Win32API::File I<when available>
Win32::API - Aldo Calpini's "Magic", http://www.divinf.it/dada/perl/
Perltoot.xxx - Tom (Christiansen)'s Object-Oriented Tutorial
=head1 COPYRIGHT
Copyright (C) 1999, Bill Birthisel. All rights reserved.
This module is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.
=head2 COMPATIBILITY
Most of the code in this module has been stable since version 0.12.
Except for items indicated as I<Experimental>, I do not expect functional
changes which are not fully backwards compatible. However, Version 0.16
removes the "dummy (0, 1) list" which was returned by many binary methods
in case they were called in list context. I do not know of any use outside
the test suite for that feature.
Version 0.12 added an I<Install.PL> script to put modules into the documented
Namespaces. The script uses I<MakeMaker> tools not available in
ActiveState 3xx builds. Users of those builds will need to install
differently (see README). Programs in the test suite are modified for
the current version. Additions to the configurtion files generated by
B<save> prevent those created by Version 0.15 from being used by earlier
Versions. 4 November 1999.
=cut