Rev 800 |
Rev 902 |
Go to most recent revision |
Blame |
Compare with Previous |
Last modification |
View Log
| RSS feed
/****************************************************************************
* Copyright (C) 2009-2010 by Claas Anders "CaScAdE" Rathje *
* admiralcascade@gmail.com *
* Project-URL: http://www.mylifesucks.de/oss/c-osd/ *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
****************************************************************************/
#include "main.h"
#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include "usart1.h"
#if !(ALLCHARSDEBUG|(WRITECHARS != -1))
volatile uint8_t rxd_buffer_locked = 0;
volatile uint8_t rxd_buffer[RXD_BUFFER_LEN];
//volatile uint8_t txd_buffer[TXD_BUFFER_LEN];
volatile uint8_t ReceivedBytes = 0;
volatile uint8_t *pRxData = 0;
volatile uint8_t RxDataLen = 0;
/* ##########################################################################
* USART1 stuff
* ##########################################################################*/
/**
* init usart1
*/
void usart1_init() {
UBRR1H = ((F_CPU / (16UL * baud)) - 1) >> 8;
UBRR1L = (F_CPU / (16UL * baud)) - 1;
// Enable receiver and transmitter; enable RX interrupt
UCSR1B = (1 << RXEN1) | (1 << TXEN1) | (1 << RXCIE1);
//asynchronous 8N1
UCSR1C = (1 << URSEL1) | (3 << UCSZ10);
}
/**
* disable the txd pin of usart1
*/
void usart1_DisableTXD(void) {
UCSR1B &= ~(1 << TXCIE1); // disable TX-Interrupt
UCSR1B &= ~(1 << TXEN1); // disable TX in USART
DDRB &= ~(1 << DDB3); // set TXD pin as input
PORTB &= ~(1 << PORTB3); // disable pullup on TXD pin
}
/**
* enable the txd pin of usart1
*/
void usart1_EnableTXD(void) {
DDRB |= (1 << DDB3); // set TXD pin as output
PORTB &= ~(1 << PORTB3); // disable pullup on TXD pin
UCSR1B |= (1 << TXEN1); // enable TX in USART
UCSR1B |= (1 << TXCIE1); // enable TX-Interrupt
}
/**
* send a single <character> through usart1
*/
void usart1_putc(unsigned char character) {
// wait until UDR ready
while (!(UCSR1A & (1 << UDRE1)));
UDR1 = character;
}
/**
* send a <string> throught usart1
*/
/*void usart1_puts(char *s) {
while (*s) {
usart1_putc(*s);
s++;
}
}*/
/**
* send a PGM<string> throught usart1
*/
void usart1_puts_pgm(const char* string) {
while (pgm_read_byte(string) != 0x00)
usart1_putc(pgm_read_byte(string++));
}
/**
* transmit interrupt handler
* unused
*/
ISR(SIG_USART1_DATA) {
}
/*
* receive data through usart1
* portions taken and adapted from
* http://svn.mikrokopter.de/mikrowebsvn/filedetails.php?repname=FlightCtrl&path=%2Fbranches%2FV0.72p+Code+Redesign+killagreg%2Fuart0.c
*/
ISR(SIG_USART1_RECV) {
uint8_t c;
// catch the received byte
c = UDR1;
if (rxd_buffer_locked) return; // if rxd buffer is locked immediately return
static uint16_t crc;
static uint8_t ptr_rxd_buffer = 0;
static uint8_t c1 = 0;
static uint8_t c2 = 0;
static uint8_t usart_rx_ok = 0;
uint8_t crc1, crc2;
// the rxd buffer is unlocked
if (usart_rx_ok == 0) {
// if ((c2 == '#') && (c1 == 'b' || c1 == 'c') && (c == 'D' || c == 'V' || c == 'O')) {
if ((c2 == '#') && (c1 == 'b' || c1 == 'c') &&
#if FCONLY
(c == 'V' || c == 'D' || c == 'Q')) { // version, debug, settings
#else
(c == 'V' || c == 'O' || c == 'Q')) { // version, OSD, settings
#endif
usart_rx_ok = 1;
rxd_buffer[ptr_rxd_buffer++] = c2;
crc = c2;
rxd_buffer[ptr_rxd_buffer++] = c1;
crc += c1;
rxd_buffer[ptr_rxd_buffer++] = c;
crc += c;
c2 = 0;
c1 = 0;
LED1_ON
LED2_OFF
} else {
c2 = c1;
c1 = c;
}
} else if (ptr_rxd_buffer < RXD_BUFFER_LEN) { // collect incomming bytes
if (c != '\r') { // no termination character
rxd_buffer[ptr_rxd_buffer++] = c; // copy byte to rxd buffer
crc += c; // update crc
} else { // termination character was received
// the last 2 bytes are no subject for checksum calculation
// they are the checksum itself
crc -= rxd_buffer[ptr_rxd_buffer - 2];
crc -= rxd_buffer[ptr_rxd_buffer - 1];
// calculate checksum from transmitted data
crc %= 4096;
crc1 = '=' + crc / 64;
crc2 = '=' + crc % 64;
// compare checksum to transmitted checksum bytes
if ((crc1 == rxd_buffer[ptr_rxd_buffer - 2]) && (crc2 == rxd_buffer[ptr_rxd_buffer - 1])) { // checksum valid
rxd_buffer[ptr_rxd_buffer] = '\r'; // set termination character
ReceivedBytes = ptr_rxd_buffer + 1; // store number of received bytes
rxd_buffer_locked = 1; // lock the rxd buffer
LED1_OFF
} else { // checksum invalid
rxd_buffer_locked = 0; // unlock rxd buffer
LED2_ON
}
ptr_rxd_buffer = 0; // reset rxd buffer pointer
usart_rx_ok = 0;
}
} else { // rxd buffer overrun
ptr_rxd_buffer = 0; // reset rxd buffer
rxd_buffer_locked = 0; // unlock rxd buffer
usart_rx_ok = 0;
LED2_ON
}
}
/**
* Decode the recevied Buffer
* portions taken and adapted from
* http://svn.mikrokopter.de/mikrowebsvn/filedetails.php?repname=FlightCtrl&path=%2Ftags%2FV0.72p%2Fuart.c
*/
void Decode64(void) {
uint8_t a, b, c, d;
uint8_t x, y, z;
uint8_t ptrIn = 3;
uint8_t ptrOut = 3;
uint8_t len = ReceivedBytes - 6;
while (len) {
a = rxd_buffer[ptrIn++] - '=';
b = rxd_buffer[ptrIn++] - '=';
c = rxd_buffer[ptrIn++] - '=';
d = rxd_buffer[ptrIn++] - '=';
x = (a << 2) | (b >> 4);
y = ((b & 0x0f) << 4) | (c >> 2);
z = ((c & 0x03) << 6) | d;
if (len--) rxd_buffer[ptrOut++] = x;
else break;
if (len--) rxd_buffer[ptrOut++] = y;
else break;
if (len--) rxd_buffer[ptrOut++] = z;
else break;
}
pRxData = &rxd_buffer[3];
RxDataLen = ptrOut - 3;
}
/**
* Request Data through usart1 until a answer is received
*/
void usart1_request_blocking(unsigned char answer, const char* message) {
rxd_buffer[2] = answer + 1;
while (rxd_buffer[2] != answer) {
rxd_buffer_locked = 0;
usart1_EnableTXD();
usart1_puts_pgm(message);
usart1_DisableTXD();
static uint8_t wait = 0;
wait = 0;
while (rxd_buffer_locked == 0 && wait < 150) {
wait++;
_delay_ms(50);
}
}
Decode64();
}
/**
* Request UART Redirect from NC to itself
*/
void usart1_request_nc_uart(void) {
usart1_EnableTXD();
usart1_putc(0x1B);
usart1_putc(0x1B);
usart1_putc(0x55);
usart1_putc(0xAA);
usart1_putc(0x00);
usart1_DisableTXD();
}
/**
* request Data through USART in special MK format by adding checksum and
* encode data in modified Base64
* portions taken and adapted from
* http://svn.mikrokopter.de/mikrowebsvn/filedetails.php?repname=FlightCtrl&path=%2Ftags%2FV0.72p%2Fuart.c
*/
/*void sendMKData(unsigned char cmd, unsigned char addr, unsigned char *snd, unsigned char len) {
unsigned int pt = 0;
unsigned char a, b, c;
unsigned char ptr = 0;
txd_buffer[pt++] = '#'; // Start-Byte
txd_buffer[pt++] = 'a' + addr; // Adress
txd_buffer[pt++] = cmd; // Command
while (len) {
if (len) {
a = snd[ptr++];
len--;
} else a = 0;
if (len) {
b = snd[ptr++];
len--;
} else b = 0;
if (len) {
c = snd[ptr++];
len--;
} else c = 0;
txd_buffer[pt++] = '=' + (a >> 2);
txd_buffer[pt++] = '=' + (((a & 0x03) << 4) | ((b & 0xf0) >> 4));
txd_buffer[pt++] = '=' + (((b & 0x0f) << 2) | ((c & 0xc0) >> 6));
txd_buffer[pt++] = '=' + (c & 0x3f);
}
// add crc
unsigned int tmpCRC = 0, i;
for (i = 0; i < pt; i++) {
tmpCRC += txd_buffer[i];
}
tmpCRC %= 4096;
txd_buffer[i++] = '=' + tmpCRC / 64;
txd_buffer[i++] = '=' + tmpCRC % 64;
txd_buffer[i++] = '\r';
usart1_puts((char*) txd_buffer);
}*/
/**
* short script to directly send a request thorugh usart including en- and disabling it
* where <address> is the address of the receipient, <label> is which data set to request
* and <ms> represents the milliseconds delay between data
*/
/*void usart1_request_mk_data(uint8_t address, char label, uint8_t ms) {
// re-enable TXD pin
usart1_EnableTXD();
unsigned char mstenth = ms / 10;
sendMKData(label, address, &mstenth, 1);
// wait until UDR ready
while (!(UCSR1A & (1 << UDRE1)));
// disable TXD pin again
usart1_DisableTXD();
}*/
#endif