Blame |
Last modification |
View Log
| RSS feed
// MESSAGE RAW_PRESSURE PACKING
#define MAVLINK_MSG_ID_RAW_PRESSURE 28
typedef struct __mavlink_raw_pressure_t
{
uint64_t time_usec; ///< Timestamp (microseconds since UNIX epoch or microseconds since system boot)
int16_t press_abs; ///< Absolute pressure (raw)
int16_t press_diff1; ///< Differential pressure 1 (raw)
int16_t press_diff2; ///< Differential pressure 2 (raw)
int16_t temperature; ///< Raw Temperature measurement (raw)
} mavlink_raw_pressure_t;
#define MAVLINK_MSG_ID_RAW_PRESSURE_LEN 16
#define MAVLINK_MSG_ID_28_LEN 16
#define MAVLINK_MESSAGE_INFO_RAW_PRESSURE { \
"RAW_PRESSURE", \
5, \
{ { "time_usec", NULL, MAVLINK_TYPE_UINT64_T, 0, 0, offsetof(mavlink_raw_pressure_t, time_usec) }, \
{ "press_abs", NULL, MAVLINK_TYPE_INT16_T, 0, 8, offsetof(mavlink_raw_pressure_t, press_abs) }, \
{ "press_diff1", NULL, MAVLINK_TYPE_INT16_T, 0, 10, offsetof(mavlink_raw_pressure_t, press_diff1) }, \
{ "press_diff2", NULL, MAVLINK_TYPE_INT16_T, 0, 12, offsetof(mavlink_raw_pressure_t, press_diff2) }, \
{ "temperature", NULL, MAVLINK_TYPE_INT16_T, 0, 14, offsetof(mavlink_raw_pressure_t, temperature) }, \
} \
}
/**
* @brief Pack a raw_pressure message
* @param system_id ID of this system
* @param component_id ID of this component (e.g. 200 for IMU)
* @param msg The MAVLink message to compress the data into
*
* @param time_usec Timestamp (microseconds since UNIX epoch or microseconds since system boot)
* @param press_abs Absolute pressure (raw)
* @param press_diff1 Differential pressure 1 (raw)
* @param press_diff2 Differential pressure 2 (raw)
* @param temperature Raw Temperature measurement (raw)
* @return length of the message in bytes (excluding serial stream start sign)
*/
static inline uint16_t mavlink_msg_raw_pressure_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg,
uint64_t time_usec, int16_t press_abs, int16_t press_diff1, int16_t press_diff2, int16_t temperature)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
char buf[16];
_mav_put_uint64_t(buf, 0, time_usec);
_mav_put_int16_t(buf, 8, press_abs);
_mav_put_int16_t(buf, 10, press_diff1);
_mav_put_int16_t(buf, 12, press_diff2);
_mav_put_int16_t(buf, 14, temperature);
memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, 16);
#else
mavlink_raw_pressure_t packet;
packet.time_usec = time_usec;
packet.press_abs = press_abs;
packet.press_diff1 = press_diff1;
packet.press_diff2 = press_diff2;
packet.temperature = temperature;
memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, 16);
#endif
msg->msgid = MAVLINK_MSG_ID_RAW_PRESSURE;
return mavlink_finalize_message(msg, system_id, component_id, 16, 67);
}
/**
* @brief Pack a raw_pressure message on a channel
* @param system_id ID of this system
* @param component_id ID of this component (e.g. 200 for IMU)
* @param chan The MAVLink channel this message was sent over
* @param msg The MAVLink message to compress the data into
* @param time_usec Timestamp (microseconds since UNIX epoch or microseconds since system boot)
* @param press_abs Absolute pressure (raw)
* @param press_diff1 Differential pressure 1 (raw)
* @param press_diff2 Differential pressure 2 (raw)
* @param temperature Raw Temperature measurement (raw)
* @return length of the message in bytes (excluding serial stream start sign)
*/
static inline uint16_t mavlink_msg_raw_pressure_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan,
mavlink_message_t* msg,
uint64_t time_usec,int16_t press_abs,int16_t press_diff1,int16_t press_diff2,int16_t temperature)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
char buf[16];
_mav_put_uint64_t(buf, 0, time_usec);
_mav_put_int16_t(buf, 8, press_abs);
_mav_put_int16_t(buf, 10, press_diff1);
_mav_put_int16_t(buf, 12, press_diff2);
_mav_put_int16_t(buf, 14, temperature);
memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, 16);
#else
mavlink_raw_pressure_t packet;
packet.time_usec = time_usec;
packet.press_abs = press_abs;
packet.press_diff1 = press_diff1;
packet.press_diff2 = press_diff2;
packet.temperature = temperature;
memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, 16);
#endif
msg->msgid = MAVLINK_MSG_ID_RAW_PRESSURE;
return mavlink_finalize_message_chan(msg, system_id, component_id, chan, 16, 67);
}
/**
* @brief Encode a raw_pressure struct into a message
*
* @param system_id ID of this system
* @param component_id ID of this component (e.g. 200 for IMU)
* @param msg The MAVLink message to compress the data into
* @param raw_pressure C-struct to read the message contents from
*/
static inline uint16_t mavlink_msg_raw_pressure_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_raw_pressure_t* raw_pressure)
{
return mavlink_msg_raw_pressure_pack(system_id, component_id, msg, raw_pressure->time_usec, raw_pressure->press_abs, raw_pressure->press_diff1, raw_pressure->press_diff2, raw_pressure->temperature);
}
/**
* @brief Send a raw_pressure message
* @param chan MAVLink channel to send the message
*
* @param time_usec Timestamp (microseconds since UNIX epoch or microseconds since system boot)
* @param press_abs Absolute pressure (raw)
* @param press_diff1 Differential pressure 1 (raw)
* @param press_diff2 Differential pressure 2 (raw)
* @param temperature Raw Temperature measurement (raw)
*/
#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS
static inline void mavlink_msg_raw_pressure_send(mavlink_channel_t chan, uint64_t time_usec, int16_t press_abs, int16_t press_diff1, int16_t press_diff2, int16_t temperature)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
char buf[16];
_mav_put_uint64_t(buf, 0, time_usec);
_mav_put_int16_t(buf, 8, press_abs);
_mav_put_int16_t(buf, 10, press_diff1);
_mav_put_int16_t(buf, 12, press_diff2);
_mav_put_int16_t(buf, 14, temperature);
_mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RAW_PRESSURE, buf, 16, 67);
#else
mavlink_raw_pressure_t packet;
packet.time_usec = time_usec;
packet.press_abs = press_abs;
packet.press_diff1 = press_diff1;
packet.press_diff2 = press_diff2;
packet.temperature = temperature;
_mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RAW_PRESSURE, (const char *)&packet, 16, 67);
#endif
}
#endif
// MESSAGE RAW_PRESSURE UNPACKING
/**
* @brief Get field time_usec from raw_pressure message
*
* @return Timestamp (microseconds since UNIX epoch or microseconds since system boot)
*/
static inline uint64_t mavlink_msg_raw_pressure_get_time_usec(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint64_t(msg, 0);
}
/**
* @brief Get field press_abs from raw_pressure message
*
* @return Absolute pressure (raw)
*/
static inline int16_t mavlink_msg_raw_pressure_get_press_abs(const mavlink_message_t* msg)
{
return _MAV_RETURN_int16_t(msg, 8);
}
/**
* @brief Get field press_diff1 from raw_pressure message
*
* @return Differential pressure 1 (raw)
*/
static inline int16_t mavlink_msg_raw_pressure_get_press_diff1(const mavlink_message_t* msg)
{
return _MAV_RETURN_int16_t(msg, 10);
}
/**
* @brief Get field press_diff2 from raw_pressure message
*
* @return Differential pressure 2 (raw)
*/
static inline int16_t mavlink_msg_raw_pressure_get_press_diff2(const mavlink_message_t* msg)
{
return _MAV_RETURN_int16_t(msg, 12);
}
/**
* @brief Get field temperature from raw_pressure message
*
* @return Raw Temperature measurement (raw)
*/
static inline int16_t mavlink_msg_raw_pressure_get_temperature(const mavlink_message_t* msg)
{
return _MAV_RETURN_int16_t(msg, 14);
}
/**
* @brief Decode a raw_pressure message into a struct
*
* @param msg The message to decode
* @param raw_pressure C-struct to decode the message contents into
*/
static inline void mavlink_msg_raw_pressure_decode(const mavlink_message_t* msg, mavlink_raw_pressure_t* raw_pressure)
{
#if MAVLINK_NEED_BYTE_SWAP
raw_pressure->time_usec = mavlink_msg_raw_pressure_get_time_usec(msg);
raw_pressure->press_abs = mavlink_msg_raw_pressure_get_press_abs(msg);
raw_pressure->press_diff1 = mavlink_msg_raw_pressure_get_press_diff1(msg);
raw_pressure->press_diff2 = mavlink_msg_raw_pressure_get_press_diff2(msg);
raw_pressure->temperature = mavlink_msg_raw_pressure_get_temperature(msg);
#else
memcpy(raw_pressure, _MAV_PAYLOAD(msg), 16);
#endif
}