Subversion Repositories Projects

Rev

Blame | Last modification | View Log | RSS feed

// MESSAGE SYS_STATUS PACKING

#define MAVLINK_MSG_ID_SYS_STATUS 34

typedef struct __mavlink_sys_status_t
{
 uint8_t mode; ///< System mode, see MAV_MODE ENUM in mavlink/include/mavlink_types.h
 uint8_t nav_mode; ///< Navigation mode, see MAV_NAV_MODE ENUM
 uint8_t status; ///< System status flag, see MAV_STATUS ENUM
 uint16_t load; ///< Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
 uint16_t vbat; ///< Battery voltage, in millivolts (1 = 1 millivolt)
 uint16_t battery_remaining; ///< Remaining battery energy: (0%: 0, 100%: 1000)
 uint16_t packet_drop; ///< Dropped packets (packets that were corrupted on reception on the MAV)
} mavlink_sys_status_t;

#define MAVLINK_MSG_ID_SYS_STATUS_LEN 11
#define MAVLINK_MSG_ID_34_LEN 11



#define MAVLINK_MESSAGE_INFO_SYS_STATUS { \
        "SYS_STATUS", \
        7, \
        {  { "mode", NULL, MAVLINK_TYPE_UINT8_T, 0, 0, offsetof(mavlink_sys_status_t, mode) }, \
         { "nav_mode", NULL, MAVLINK_TYPE_UINT8_T, 0, 1, offsetof(mavlink_sys_status_t, nav_mode) }, \
         { "status", NULL, MAVLINK_TYPE_UINT8_T, 0, 2, offsetof(mavlink_sys_status_t, status) }, \
         { "load", NULL, MAVLINK_TYPE_UINT16_T, 0, 3, offsetof(mavlink_sys_status_t, load) }, \
         { "vbat", NULL, MAVLINK_TYPE_UINT16_T, 0, 5, offsetof(mavlink_sys_status_t, vbat) }, \
         { "battery_remaining", NULL, MAVLINK_TYPE_UINT16_T, 0, 7, offsetof(mavlink_sys_status_t, battery_remaining) }, \
         { "packet_drop", NULL, MAVLINK_TYPE_UINT16_T, 0, 9, offsetof(mavlink_sys_status_t, packet_drop) }, \
         } \
}



/**
 * @brief Pack a sys_status message
 * @param system_id ID of this system
 * @param component_id ID of this component (e.g. 200 for IMU)
 * @param msg The MAVLink message to compress the data into
 *
 * @param mode System mode, see MAV_MODE ENUM in mavlink/include/mavlink_types.h
 * @param nav_mode Navigation mode, see MAV_NAV_MODE ENUM
 * @param status System status flag, see MAV_STATUS ENUM
 * @param load Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
 * @param vbat Battery voltage, in millivolts (1 = 1 millivolt)
 * @param battery_remaining Remaining battery energy: (0%: 0, 100%: 1000)
 * @param packet_drop Dropped packets (packets that were corrupted on reception on the MAV)
 * @return length of the message in bytes (excluding serial stream start sign)
 */

static inline uint16_t mavlink_msg_sys_status_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg,
                                                       uint8_t mode, uint8_t nav_mode, uint8_t status, uint16_t load, uint16_t vbat, uint16_t battery_remaining, uint16_t packet_drop)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
        char buf[11];
        _mav_put_uint8_t(buf, 0, mode);
        _mav_put_uint8_t(buf, 1, nav_mode);
        _mav_put_uint8_t(buf, 2, status);
        _mav_put_uint16_t(buf, 3, load);
        _mav_put_uint16_t(buf, 5, vbat);
        _mav_put_uint16_t(buf, 7, battery_remaining);
        _mav_put_uint16_t(buf, 9, packet_drop);

        memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, 11);
#else
        mavlink_sys_status_t packet;
        packet.mode = mode;
        packet.nav_mode = nav_mode;
        packet.status = status;
        packet.load = load;
        packet.vbat = vbat;
        packet.battery_remaining = battery_remaining;
        packet.packet_drop = packet_drop;

        memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, 11);
#endif

        msg->msgid = MAVLINK_MSG_ID_SYS_STATUS;
        return mavlink_finalize_message(msg, system_id, component_id, 11);
}

/**
 * @brief Pack a sys_status message on a channel
 * @param system_id ID of this system
 * @param component_id ID of this component (e.g. 200 for IMU)
 * @param chan The MAVLink channel this message was sent over
 * @param msg The MAVLink message to compress the data into
 * @param mode System mode, see MAV_MODE ENUM in mavlink/include/mavlink_types.h
 * @param nav_mode Navigation mode, see MAV_NAV_MODE ENUM
 * @param status System status flag, see MAV_STATUS ENUM
 * @param load Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
 * @param vbat Battery voltage, in millivolts (1 = 1 millivolt)
 * @param battery_remaining Remaining battery energy: (0%: 0, 100%: 1000)
 * @param packet_drop Dropped packets (packets that were corrupted on reception on the MAV)
 * @return length of the message in bytes (excluding serial stream start sign)
 */

static inline uint16_t mavlink_msg_sys_status_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan,
                                                           mavlink_message_t* msg,
                                                           uint8_t mode,uint8_t nav_mode,uint8_t status,uint16_t load,uint16_t vbat,uint16_t battery_remaining,uint16_t packet_drop)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
        char buf[11];
        _mav_put_uint8_t(buf, 0, mode);
        _mav_put_uint8_t(buf, 1, nav_mode);
        _mav_put_uint8_t(buf, 2, status);
        _mav_put_uint16_t(buf, 3, load);
        _mav_put_uint16_t(buf, 5, vbat);
        _mav_put_uint16_t(buf, 7, battery_remaining);
        _mav_put_uint16_t(buf, 9, packet_drop);

        memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, 11);
#else
        mavlink_sys_status_t packet;
        packet.mode = mode;
        packet.nav_mode = nav_mode;
        packet.status = status;
        packet.load = load;
        packet.vbat = vbat;
        packet.battery_remaining = battery_remaining;
        packet.packet_drop = packet_drop;

        memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, 11);
#endif

        msg->msgid = MAVLINK_MSG_ID_SYS_STATUS;
        return mavlink_finalize_message_chan(msg, system_id, component_id, chan, 11);
}

/**
 * @brief Encode a sys_status struct into a message
 *
 * @param system_id ID of this system
 * @param component_id ID of this component (e.g. 200 for IMU)
 * @param msg The MAVLink message to compress the data into
 * @param sys_status C-struct to read the message contents from
 */

static inline uint16_t mavlink_msg_sys_status_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_sys_status_t* sys_status)
{
        return mavlink_msg_sys_status_pack(system_id, component_id, msg, sys_status->mode, sys_status->nav_mode, sys_status->status, sys_status->load, sys_status->vbat, sys_status->battery_remaining, sys_status->packet_drop);
}

/**
 * @brief Send a sys_status message
 * @param chan MAVLink channel to send the message
 *
 * @param mode System mode, see MAV_MODE ENUM in mavlink/include/mavlink_types.h
 * @param nav_mode Navigation mode, see MAV_NAV_MODE ENUM
 * @param status System status flag, see MAV_STATUS ENUM
 * @param load Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
 * @param vbat Battery voltage, in millivolts (1 = 1 millivolt)
 * @param battery_remaining Remaining battery energy: (0%: 0, 100%: 1000)
 * @param packet_drop Dropped packets (packets that were corrupted on reception on the MAV)
 */

#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS

static inline void mavlink_msg_sys_status_send(mavlink_channel_t chan, uint8_t mode, uint8_t nav_mode, uint8_t status, uint16_t load, uint16_t vbat, uint16_t battery_remaining, uint16_t packet_drop)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
        char buf[11];
        _mav_put_uint8_t(buf, 0, mode);
        _mav_put_uint8_t(buf, 1, nav_mode);
        _mav_put_uint8_t(buf, 2, status);
        _mav_put_uint16_t(buf, 3, load);
        _mav_put_uint16_t(buf, 5, vbat);
        _mav_put_uint16_t(buf, 7, battery_remaining);
        _mav_put_uint16_t(buf, 9, packet_drop);

        _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_STATUS, buf, 11);
#else
        mavlink_sys_status_t packet;
        packet.mode = mode;
        packet.nav_mode = nav_mode;
        packet.status = status;
        packet.load = load;
        packet.vbat = vbat;
        packet.battery_remaining = battery_remaining;
        packet.packet_drop = packet_drop;

        _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_STATUS, (const char *)&packet, 11);
#endif
}

#endif

// MESSAGE SYS_STATUS UNPACKING


/**
 * @brief Get field mode from sys_status message
 *
 * @return System mode, see MAV_MODE ENUM in mavlink/include/mavlink_types.h
 */

static inline uint8_t mavlink_msg_sys_status_get_mode(const mavlink_message_t* msg)
{
        return _MAV_RETURN_uint8_t(msg,  0);
}

/**
 * @brief Get field nav_mode from sys_status message
 *
 * @return Navigation mode, see MAV_NAV_MODE ENUM
 */

static inline uint8_t mavlink_msg_sys_status_get_nav_mode(const mavlink_message_t* msg)
{
        return _MAV_RETURN_uint8_t(msg,  1);
}

/**
 * @brief Get field status from sys_status message
 *
 * @return System status flag, see MAV_STATUS ENUM
 */

static inline uint8_t mavlink_msg_sys_status_get_status(const mavlink_message_t* msg)
{
        return _MAV_RETURN_uint8_t(msg,  2);
}

/**
 * @brief Get field load from sys_status message
 *
 * @return Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
 */

static inline uint16_t mavlink_msg_sys_status_get_load(const mavlink_message_t* msg)
{
        return _MAV_RETURN_uint16_t(msg,  3);
}

/**
 * @brief Get field vbat from sys_status message
 *
 * @return Battery voltage, in millivolts (1 = 1 millivolt)
 */

static inline uint16_t mavlink_msg_sys_status_get_vbat(const mavlink_message_t* msg)
{
        return _MAV_RETURN_uint16_t(msg,  5);
}

/**
 * @brief Get field battery_remaining from sys_status message
 *
 * @return Remaining battery energy: (0%: 0, 100%: 1000)
 */

static inline uint16_t mavlink_msg_sys_status_get_battery_remaining(const mavlink_message_t* msg)
{
        return _MAV_RETURN_uint16_t(msg,  7);
}

/**
 * @brief Get field packet_drop from sys_status message
 *
 * @return Dropped packets (packets that were corrupted on reception on the MAV)
 */

static inline uint16_t mavlink_msg_sys_status_get_packet_drop(const mavlink_message_t* msg)
{
        return _MAV_RETURN_uint16_t(msg,  9);
}

/**
 * @brief Decode a sys_status message into a struct
 *
 * @param msg The message to decode
 * @param sys_status C-struct to decode the message contents into
 */

static inline void mavlink_msg_sys_status_decode(const mavlink_message_t* msg, mavlink_sys_status_t* sys_status)
{
#if MAVLINK_NEED_BYTE_SWAP
        sys_status->mode = mavlink_msg_sys_status_get_mode(msg);
        sys_status->nav_mode = mavlink_msg_sys_status_get_nav_mode(msg);
        sys_status->status = mavlink_msg_sys_status_get_status(msg);
        sys_status->load = mavlink_msg_sys_status_get_load(msg);
        sys_status->vbat = mavlink_msg_sys_status_get_vbat(msg);
        sys_status->battery_remaining = mavlink_msg_sys_status_get_battery_remaining(msg);
        sys_status->packet_drop = mavlink_msg_sys_status_get_packet_drop(msg);
#else
        memcpy(sys_status, _MAV_PAYLOAD(msg), 11);
#endif
}