Subversion Repositories Projects

Rev

Blame | Last modification | View Log | RSS feed

/* Copyright (c) 2005, Dmitry Xmelkov
   All rights reserved.

   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions are met:

   * Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.
   * Redistributions in binary form must reproduce the above copyright
     notice, this list of conditions and the following disclaimer in
     the documentation and/or other materials provided with the
     distribution.
   * Neither the name of the copyright holders nor the names of
     contributors may be used to endorse or promote products derived
     from this software without specific prior written permission.

  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  POSSIBILITY OF SUCH DAMAGE. */

/* $Id: ftoa_engine.S,v 1.3 2009/04/01 23:11:00 arcanum Exp $ */

#ifndef __DOXYGEN__

#include "macros.inc"
#include "ftoa_engine.h"

#if  defined(__AVR_HAVE_LPMX__) && __AVR_HAVE_LPMX__
#  define AVR_ENH_LPM   1
#else
#  define AVR_ENH_LPM   0
#endif

/*
   int __ftoa_engine (double val, char *buf,
                      unsigned char prec, unsigned char maxdgs)
 Input:
    val    - value to convert
    buf    - output buffer address
    prec   - precision: number of decimal digits is 'prec + 1'
    maxdgs - (0 if unused) precision restriction for "%f" specification

 Output:
    return     - decimal exponent of first digit
    buf[0]     - flags (FTOA_***)
    buf[1],... - decimal digits
    Number of digits:
        maxdgs == 0 ? prec+1 :
        (buf[0] & FTOA_CARRY) == 0 || buf[1] != '1' ?
            aver(1, maxdgs+exp, prec+1) :
            aver(1, masdgs+exp-1, prec+1)

 Notes:
    * Output string is not 0-terminated. For possibility of user's buffer
    usage in any case.
    * If used, 'maxdgs' is a number of digits for value with zero exponent.
*/

    /* Input */
#define maxdgs  r16
#define prec    r18
#define buf_lo  r20
#define buf_hi  r21
#define val_lo  r22
#define val_hi  r23
#define val_hlo r24
#define val_hhi r25

    /* Float value parse        */
#define flag    r19

    /* Multiplication of mantisses      */
#define exp_sv  r17
#define mlt_1   r19     /* lowest result byte   */
#define mlt_2   r14
#define mlt_3   r15
#define mlt_4   r20
#define mlt_5   r21
#define mlt_6   r28
#define mlt_7   r29

    /* Conversion to string     */
#define pwr_2   r1      /* lowest byte of 'powr10' element      */
#define pwr_3   r17
#define pwr_4   r19
#define pwr_5   r22
#define pwr_6   r25
#define pwr_7   r0
#define digit   r23
#define exp10   r24

    /* Fixed */
#define zero    r1

/*    ASSEMBLY_CLIB_SECTION */
        
    .global     __ftoa_engine
    .type       __ftoa_engine, "function"
__ftoa_engine:

/* --------------------------------------------------------------------
   Float value parse.
*/
  ; limit 'prec'
        cpi     prec, 8
        brlo    1f
        ldi     prec, 7
1:
  ; init.
        clr     flag
        X_movw  XL, buf_lo
  ; val_hhi := exponent, sign test and remove
#if  FTOA_MINUS != 1
#  error  FTOA_MINUS must be 1:  add with carry used
#endif
        lsl     val_hhi
        adc     flag, zero              ; FTOA_MINUS
        sbrc    val_hlo, 7
        ori     val_hhi, 1
  ; zero test
        adiw    val_hlo, 0
        cpc     val_lo, zero
        cpc     val_hi, zero
        brne    3f
  ; return 0
        ori     flag, FTOA_ZERO
        subi    prec, -2
2:      st      X+, flag
        ldi     flag, '0'
        dec     prec
        brne    2b
        ret                             ; r24,r25 == 0
3:
  ; infinity, NaN ?
#if  FTOA_NAN != 2 * FTOA_INF
#  error  Must: FTOA_NAN == 2*FTOA_INF: 'rjmp' is absent
#endif
        cpi     val_hhi, 0xff
        brlo    6f
        cpi     val_hlo, 0x80
        cpc     val_hi, zero
        cpc     val_lo, zero
        breq    5f
        subi    flag, -FTOA_INF         ; FTOA_NAN
5:      subi    flag, -FTOA_INF
6:
  ; write flags byte
        st      X+, flag
  ; hidden bit
        cpi     val_hhi, 1
        brlo    7f                      ; if subnormal value
        ori     val_hlo, 0x80
7:      adc     val_hhi, zero
  ; pushes
        push    r29
        push    r28
        push    r17
        push    r16
        push    r15
        push    r14

/* --------------------------------------------------------------------
   Multiplication of mantisses (val and table).
   At the begin:
        val_hlo .. val_lo  - input value mantisse
        val_hhi            - input value exponent
        X                  - second byte address (string begin)
   At the end:
        mlt_7 .. mlt_2     - multiplication result
        exp10              - decimal exponent
*/

  ; save
        mov     exp_sv, val_hhi
  ; Z := & base10[exp / 8]      (sizeof(base10[0]) == 5)
        andi    val_hhi, ~7
        lsr     val_hhi                 ; (exp/8) * 4
        mov     ZL, val_hhi
        lsr     val_hhi
        lsr     val_hhi                 ; exp/8
        add     ZL, val_hhi             ; (exp/8) * 5
        clr     ZH
        subi    ZL, lo8(-(.L_base10))
        sbci    ZH, hi8(-(.L_base10))
  ; highest mantissa byte  (mult. shifting prepare)
        clr     val_hhi
  ; result initializ.
        clr     mlt_1
        clr     mlt_2
        clr     mlt_3
        X_movw  mlt_4, mlt_2
        X_movw  mlt_6, mlt_2

  ; multiply to 1-st table byte
#if  AVR_ENH_LPM
        lpm     r0, Z+
#else
        lpm
        adiw    ZL, 1
#endif
        sec                     ; for loop end control
        ror     r0
  ; addition
10:     brcc    11f
        add     mlt_1, val_lo
        adc     mlt_2, val_hi
        adc     mlt_3, val_hlo
        adc     mlt_4, val_hhi
        adc     mlt_5, zero
  ; arg shift
11:     lsl     val_lo
        rol     val_hi
        rol     val_hlo
        rol     val_hhi
  ; next bit
        lsr     r0
        brne    10b

  ; second table byte
#if  AVR_ENH_LPM
        lpm     r0, Z+          ; C flag is stay 1
#else
        lpm
        adiw    ZL, 1
        sec
#endif
        ror     r0
  ; addition
12:     brcc    13f
        add     mlt_2, val_hi           ; val_hi is the least byte now
        adc     mlt_3, val_hlo
        adc     mlt_4, val_hhi
        adc     mlt_5, val_lo
        adc     mlt_6, zero
  ; arg shift
13:     lsl     val_hi
        rol     val_hlo
        rol     val_hhi
        rol     val_lo
  ; next bit
        lsr     r0
        brne    12b

  ; 3-t table byte
#if  AVR_ENH_LPM
        lpm     r0, Z+          ; C flag is stay 1
#else
        lpm
        adiw    ZL, 1
        sec
#endif
        ror     r0
  ; addition
14:     brcc    15f
        add     mlt_3, val_hlo          ; val_hlo is the least byte now
        adc     mlt_4, val_hhi
        adc     mlt_5, val_lo
        adc     mlt_6, val_hi
        adc     mlt_7, zero
  ; arg shift
15:     lsl     val_hlo
        rol     val_hhi
        rol     val_lo
        rol     val_hi
  ; next bit
        lsr     r0
        brne    14b

  ; 4-t table byte
#if  AVR_ENH_LPM
        lpm     r0, Z+          ; C flag is stay 1
#else
        lpm
#endif
        ror     r0
  ; addition
16:     brcc    17f
        add     mlt_4, val_hhi          ; val_hhi is the least byte now
        adc     mlt_5, val_lo
        adc     mlt_6, val_hi
        adc     mlt_7, val_hlo
  ; arg shift
17:     lsl     val_hhi
        rol     val_lo
        rol     val_hi
        rol     val_hlo
  ; next bit
        lsr     r0
        brne    16b

  ; decimal exponent
#if  AVR_ENH_LPM
        lpm     exp10, Z
#else
        adiw    ZL, 1
        lpm
        mov     exp10, r0
#endif

  ; result shift:  mlt_7..2 >>= (~exp & 7)
        com     exp_sv
        andi    exp_sv, 7
        breq    19f
18:     lsr     mlt_7
        ror     mlt_6
        ror     mlt_5
        ror     mlt_4
        ror     mlt_3
        ror     mlt_2
        dec     exp_sv
        brne    18b
19:

/* --------------------------------------------------------------------
   Conversion to string.

   Registers usage:
      mlt_7 .. mlt_2    - new mantissa (multiplication result)
      pwr_7 .. pwr_2    - 'powr10' table element
      Z                 - 'powr10' table pointer
      X                 - output string pointer
      maxdgs            - number of digits
      prec              - number of digits stays to output
      exp10             - decimal exponent
      digit             - conversion process

   At the end:
      X                 - end of buffer (nonfilled byte)
      exp10             - corrected dec. exponent
      mlt_7 .. mlt_2    - remainder
      pwr_7 .. pwr_2    - last powr10[] element

   Notes:
     * It is possible to leave out powr10'x table with subnormal value.
      Result: accuracy degrease on the rounding phase.  No matter: high
      precision with subnormals is not needed. (Now 0x00000001 is converted
      exactly on prec = 5, i.e. 6 digits.)
*/

  ; to find first digit
        ldi     ZL, lo8(.L_powr10)
        ldi     ZH, hi8(.L_powr10)
        set
  ; 'pwr10' element reading
.L_digit:
        X_lpm   pwr_2, Z+
        X_lpm   pwr_3, Z+
        X_lpm   pwr_4, Z+
        X_lpm   pwr_5, Z+
        X_lpm   pwr_6, Z+
        X_lpm   pwr_7, Z+
  ; 'digit' init.
        ldi     digit, '0' - 1
  ; subtraction loop
20:     inc     digit
        sub     mlt_2, pwr_2
        sbc     mlt_3, pwr_3
        sbc     mlt_4, pwr_4
        sbc     mlt_5, pwr_5
        sbc     mlt_6, pwr_6
        sbc     mlt_7, pwr_7
        brsh    20b
  ; restore mult
        add     mlt_2, pwr_2
        adc     mlt_3, pwr_3
        adc     mlt_4, pwr_4
        adc     mlt_5, pwr_5
        adc     mlt_6, pwr_6
        adc     mlt_7, pwr_7
  ; analisys
        brtc    25f
        cpi     digit, '0'
        brne    21f             ; this is the first digit finded
        dec     exp10
        rjmp    .L_digit
  ; now is the first digit
21:     clt
  ; number of digits
        subi    maxdgs, 1
        brlo    23f                     ; maxdgs was 0
        add     maxdgs, exp10
        brpl    22f
        clr     maxdgs
22:     cp      maxdgs, prec
        brsh    23f
        mov     prec, maxdgs
23:     inc     prec
        mov     maxdgs, prec    
  ; operate digit
25:     cpi     digit, '0' + 10
        brlo    27f
  ; overflow, digit > '9'
        ldi     digit, '9'
26:     st      X+, digit
        dec     prec
        brne    26b
        rjmp    .L_up
  ; write digit
27:     st      X+, digit
        dec     prec
        brne    .L_digit

/* --------------------------------------------------------------------
    Rounding.
*/
.L_round:
  ; pwr10 /= 2
        lsr     pwr_7
        ror     pwr_6
        ror     pwr_5
        ror     pwr_4
        ror     pwr_3
        ror     pwr_2
  ; mult -= pwr10  (half of last 'pwr10' value)
        sub     mlt_2, pwr_2
        sbc     mlt_3, pwr_3
        sbc     mlt_4, pwr_4
        sbc     mlt_5, pwr_5
        sbc     mlt_6, pwr_6
        sbc     mlt_7, pwr_7
  ; rounding direction?
        brlo    .L_rest
  ; round to up
.L_up:
        inc     prec
        ld      digit, -X
        inc     digit
        cpi     digit, '9' + 1
        brlo    31f
        ldi     digit, '0'
31:     st      X, digit
        cpse    prec, maxdgs
        brsh    .L_up
  ; it was a carry to master digit
        ld      digit, -X               ; flags
        ori     digit, FTOA_CARRY       ; 'C' is not changed
        st      X+, digit
        brlo    .L_rest                 ; above comparison
  ; overflow
        inc     exp10
        ldi     digit, '1'
32:     st      X+, digit
        ldi     digit, '0'
        dec     prec
        brne    32b
  ; restore
.L_rest:
        clr     zero
        pop     r14
        pop     r15
        pop     r16
        pop     r17
        pop     r28
        pop     r29
  ; return
        clr     r25
        sbrc    exp10, 7                ; high byte
        com     r25
        ret

    .size  __ftoa_engine, . - __ftoa_engine

/* --------------------------------------------------------------------
    Tables.  '.L_powr10' is placed first -- for subnormals stability.
*/
    .section .progmem.data,"a",@progbits

    .type .L_powr10, "object"
.L_powr10:
        .byte   0, 64, 122, 16, 243, 90 ; 100000000000000
        .byte   0, 160, 114, 78, 24, 9  ; 10000000000000
        .byte   0, 16, 165, 212, 232, 0 ; 1000000000000
        .byte   0, 232, 118, 72, 23, 0  ; 100000000000
        .byte   0, 228, 11, 84, 2, 0    ; 10000000000
        .byte   0, 202, 154, 59, 0, 0   ; 1000000000
        .byte   0, 225, 245, 5, 0, 0    ; 100000000
        .byte   128, 150, 152, 0, 0, 0  ; 10000000
        .byte   64, 66, 15, 0, 0, 0     ; 1000000
        .byte   160, 134, 1, 0, 0, 0    ; 100000
        .byte   16, 39, 0, 0, 0, 0      ; 10000
        .byte   232, 3, 0, 0, 0, 0      ; 1000
        .byte   100, 0, 0, 0, 0, 0      ; 100
        .byte   10, 0, 0, 0, 0, 0       ; 10
        .byte   1, 0, 0, 0, 0, 0        ; 1
    .size .L_powr10, . - .L_powr10

    .type       .L_base10, "object"
.L_base10:
        .byte   44, 118, 216, 136, -36  ; 2295887404
        .byte   103, 79, 8, 35, -33     ; 587747175
        .byte   193, 223, 174, 89, -31  ; 1504632769
        .byte   177, 183, 150, 229, -29 ; 3851859889
        .byte   228, 83, 198, 58, -26   ; 986076132
        .byte   81, 153, 118, 150, -24  ; 2524354897
        .byte   230, 194, 132, 38, -21  ; 646234854
        .byte   137, 140, 155, 98, -19  ; 1654361225
        .byte   64, 124, 111, 252, -17  ; 4235164736
        .byte   188, 156, 159, 64, -14  ; 1084202172
        .byte   186, 165, 111, 165, -12 ; 2775557562
        .byte   144, 5, 90, 42, -9      ; 710542736
        .byte   92, 147, 107, 108, -7   ; 1818989404
        .byte   103, 109, 193, 27, -4   ; 465661287
        .byte   224, 228, 13, 71, -2    ; 1192092896
        .byte   245, 32, 230, 181, 0    ; 3051757813
        .byte   208, 237, 144, 46, 3    ; 781250000
        .byte   0, 148, 53, 119, 5      ; 2000000000
        .byte   0, 128, 132, 30, 8      ; 512000000
        .byte   0, 0, 32, 78, 10        ; 1310720000
        .byte   0, 0, 0, 200, 12        ; 3355443200
        .byte   51, 51, 51, 51, 15      ; 858993459
        .byte   152, 110, 18, 131, 17   ; 2199023256
        .byte   65, 239, 141, 33, 20    ; 562949953
        .byte   137, 59, 230, 85, 22    ; 1441151881
        .byte   207, 254, 230, 219, 24  ; 3689348815
        .byte   209, 132, 75, 56, 27    ; 944473297
        .byte   247, 124, 29, 144, 29   ; 2417851639
        .byte   164, 187, 228, 36, 32   ; 618970020
        .byte   50, 132, 114, 94, 34    ; 1584563250
        .byte   129, 0, 201, 241, 36    ; 4056481921
        .byte   236, 161, 229, 61, 39   ; 1038459372
    .size .L_base10, . - .L_base10

        .end
#endif  /* !__DOXYGEN__ */