WebSVN - Projects - Diff - Rev 241 and 246 - /QMK-Groundstation/trunk/Forms/mktool.cpp


/***************************************************************************
 *   Copyright (C) 2008 by Manuel Schrape                                  *
 *   manuel.schrape@gmx.de                                                 *
 *                                                                         *
 *   This program is free software; you can redistribute it and/or modify  *
 *   it under the terms of the GNU General Public License as published by  *
 *   the Free Software Foundation; either version 2 of the License.        *
 *                                                                         *
 *   This program is distributed in the hope that it will be useful,       *
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
 *   GNU General Public License for more details.                          *
 *                                                                         *
 *   You should have received a copy of the GNU General Public License     *
 *   along with this program; if not, write to the                         *
 *   Free Software Foundation, Inc.,                                       *
 *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
 ***************************************************************************/
 
#include <QtGui>
 
#include <QLineEdit>
#include <QString>
#include <QTimer>
#include <QIcon>
#include <QToolButton>
#include <QSpinBox>
#include <QAction>
#include <QPalette>
 
#include "mktool.h"
#include "dlg_Config.h"
#include "dlg_Motortest.h"
#include "dlg_Preferences.h"
#include "../global.h"
#include "../Classes/ToolBox.h"
 
#include <stdlib.h>
 
MKTool::MKTool()
{
    setupUi(this);
 
    Settings = new cSettings;
 
    init_Arrays();
    init_GUI();
 
    init_Objects();
    init_Connections();
 
    init_Plot();
}
 
void MKTool::init_GUI()
{
    setWindowTitle(QA_NAME + " v" + QA_VERSION);
 
    // Tab mit Debug-Elementen verbergen
     tab_Main->removeTab(6);
 
    // Tab mit Wegpunkte-Elementen verbergen
    tab_Main->removeTab(5);
 
    // Settings-Tab hinzufügen.
    f_Settings = new wdg_Settings( this );
    f_Settings->set_Config(Settings);
    tab_Main->insertTab ( 2, f_Settings, ac_View2->icon(), "FC-Settings");
    tab_Main->widget(2)->setObjectName("Tab_2");
 
    // Develop - Nicht gebrauchte sachen abschalten.
    pb_SettingsReset->hide();
    pb_Flash->hide();
    rb_NC->hide();
 
    // Zusätzliche Widgets in die Toolbar.
    tb_TTY->addWidget(lb_Port);
    tb_TTY->addWidget(le_Port);
 
    tb_Hardware->addWidget(rb_SelFC);
    tb_Hardware->addWidget(rb_SelNC);
    tb_Hardware->addWidget(rb_SelMag);
 
    tb_Allgemein->setVisible(Settings->GUI.ToolViews[0]);
    tb_Werkzeuge->setVisible(Settings->GUI.ToolViews[1]);
    tb_Debug->setVisible(Settings->GUI.ToolViews[2]);
    tb_TTY->setVisible(Settings->GUI.ToolViews[3]);
    tb_Hardware->setVisible(Settings->GUI.ToolViews[4]);
 
    lb_Status->setText(tr("Hallo bei QMK-Groundstation...!!!"));
 
    QPalette newPalette;
 
    newPalette.setColor(QPalette::Base, Qt::darkBlue);
    newPalette.setColor(QPalette::Foreground, QColor(Qt::darkBlue).dark(120));
    newPalette.setColor(QPalette::Text, Qt::white);
 
    Compass->setScaleOptions(QwtDial::ScaleTicks | QwtDial::ScaleLabel);
    Compass->setScaleTicks(0, 0, 3);
    Compass->setScale(36, 5, 0);
 
//    Compass->setNeedle(new QwtCompassMagnetNeedle(QwtCompassMagnetNeedle::ThinStyle));
    Compass->setNeedle(new QwtDialSimpleNeedle(QwtDialSimpleNeedle::Arrow, true, Qt::red, QColor(Qt::gray).light(130)));
    Compass->setPalette(newPalette);
    Compass->setMaximumSize(QSize(MeterSize, MeterSize));
    Compass->setMinimumSize(QSize(MeterSize, MeterSize));
 
    QPalette newPalette1;
 
    newPalette1.setColor(QPalette::Base, Qt::darkBlue);
    newPalette1.setColor(QPalette::Foreground, QColor(255,128,0).dark(120));
    newPalette1.setColor(QPalette::Text, Qt::white);
 
    Attitude = new AttitudeIndicator(this);
    Attitude->setMaximumSize(QSize(MeterSize, MeterSize));
    Attitude->setMinimumSize(QSize(MeterSize, MeterSize));
    Attitude->setPalette(newPalette1);
 
    verticalLayout->addWidget(Attitude);
 
    qwt_Rate->setRange(-10.0, 10.0, 0.1, 0);
 
    newPalette1.setColor(QPalette::Foreground, QColor(Qt::darkBlue).dark(120));
 
    SpeedMeter = new cSpeedMeter(this);
    SpeedMeter->setMaximumSize(QSize(MeterSize, MeterSize));
    SpeedMeter->setMinimumSize(QSize(MeterSize, MeterSize));
    SpeedMeter->setPalette(newPalette1);
    SpeedMeter->setRange(0.0, 5.0);
    SpeedMeter->setScale(1, 2, 0.5);
    SpeedMeter->setProperty("END", 5);
 
    LayOut_Speed->addWidget(SpeedMeter);
 
#ifdef _EEEPC_
    lb_Status->hide();
#endif
 
    resize(Settings->GUI.Size);
    move(Settings->GUI.Point);
 
    if (Settings->GUI.isMax)
    {
        showMaximized();
    }
 
    // Analoglabels anzeigen
    for (int a = 0; a < MaxAnalog; a++)
    {
        lb_Analog[a]->setText(Settings->Analog1.Label[a]);
    }
 
    // Kopie der Tabs anlegen
//    for (int b = 0; b < 7; b++)
    for (int b = 0; b < 6; b++)
    {
        TabWidgets[b] = tab_Main->widget(b);
    }
 
    // Ausgeblendete Tabs ausblenden
//    for (int c = 0; c < 7; c++)
    for (int c = 0; c < 6; c++)
    {
        if (Settings->GUI.TabViews[c] == false)
        {
            QString TabName = QString("Tab_%1").arg(c);
 
            for (int d = 0; d < tab_Main->count(); d++)
            {
                if (tab_Main->widget(d)->objectName() == TabName)
                {
                    tab_Main->removeTab(d);
                }
            }
        }
    }
 
    ac_View0->setChecked(Settings->GUI.TabViews[0]);
    ac_View1->setChecked(Settings->GUI.TabViews[1]);
    ac_View2->setChecked(Settings->GUI.TabViews[2]);
    ac_View3->setChecked(Settings->GUI.TabViews[3]);
    ac_View4->setChecked(Settings->GUI.TabViews[4]);
    ac_View5->setChecked(Settings->GUI.TabViews[5]);
//    ac_View6->setChecked(Settings->GUI.TabViews[6]);
 
    le_Port->setText(Settings->TTY.Port);
 
    cb_ShowMSG->setChecked(Settings->GUI.Term_Info);
    cb_ShowData->setChecked(Settings->GUI.Term_Data);
    cb_ShowAlways->setChecked(Settings->GUI.Term_Always);
}
 
void MKTool::init_Objects()
{
    // QTimer-Instanzen
    Ticker = new QTimer(this);
 
    // Seriell-Port
    serialPort = new ManageSerialPort;
 
    // neuer Logger
    logger = new Logger(Settings, &Mode);
 
    // LCD-Dialog
    f_LCD = new dlg_LCD(this);
 
    // Senden erlauben (Warum auch immer)
    AllowSend = true;
 
    Server = new cServer();
 
    MyServer = new cQMK_Server();
    MyServer->setProperty("Connect", false);
 
 
    if (Settings->Server.StartServer)
    {
        ac_StartServer->setChecked(true);
        Server->start_Server(Settings->Server.Port.toInt(), Settings);
    }
}
 
void MKTool::init_Connections()
{
    connect(Dec,   SIGNAL(clicked()), this, SLOT(slot_Test()));
 
    // Seriel-Port Empfang
    connect(serialPort, SIGNAL(newDataReceived(const QByteArray &)), this, SLOT(slot_newDataReceived(const QByteArray &)));
 
    // Serielle Verbundung öffnen / schließen
    connect(ac_ConnectTTY, SIGNAL(triggered()), this, SLOT(slot_OpenPort()));
 
    // TCP-Connection verbinden / trennen
    connect(ac_QMKServer, SIGNAL(triggered()), this, SLOT(slot_QMKS_Connect()));
 
    // Buttons Settings lesen / schreiben
    connect(f_Settings->pb_Read,   SIGNAL(clicked()), this, SLOT(slot_GetFCSettings()));
    connect(f_Settings->pb_Write,  SIGNAL(clicked()), this, SLOT(slot_SetFCSettings()));
 
    // Actions
    connect(ac_Config,       SIGNAL(triggered()), this, SLOT(slot_ac_Config()));
    connect(ac_Preferences,  SIGNAL(triggered()), this, SLOT(slot_ac_Preferences()));
    connect(ac_Motortest,    SIGNAL(triggered()), this, SLOT(slot_ac_Motortest()));
    connect(ac_LCD,          SIGNAL(triggered()), this, SLOT(slot_ac_LCD()));
    connect(ac_FastDebug,    SIGNAL(triggered()), this, SLOT(slot_ac_FastDebug()));
    connect(ac_NoDebug,      SIGNAL(triggered()), this, SLOT(slot_ac_NoDebug()));
    connect(ac_FastNavi,     SIGNAL(triggered()), this, SLOT(slot_ac_FastNavi()));
    connect(ac_NoNavi,       SIGNAL(triggered()), this, SLOT(slot_ac_NoNavi()));
    connect(ac_GetLabels,    SIGNAL(triggered()), this, SLOT(slot_ac_GetLabels()));
 
    // Plotter starten / scrollen
    connect(scroll_plot,     SIGNAL(valueChanged(int)), this, SLOT(slot_ScrollPlot(int)));
    connect(ac_StartPlotter, SIGNAL(triggered()), this, SLOT(slot_ac_StartPlotter()));
    connect(ac_StartServer,  SIGNAL(triggered()), this, SLOT(slot_ac_StartServer()));
 
    // Tabs ein & ausblenden
    connect(ac_View0,        SIGNAL(triggered()), this, SLOT(slot_ac_View()));
    connect(ac_View1,        SIGNAL(triggered()), this, SLOT(slot_ac_View()));
    connect(ac_View2,        SIGNAL(triggered()), this, SLOT(slot_ac_View()));
    connect(ac_View3,        SIGNAL(triggered()), this, SLOT(slot_ac_View()));
    connect(ac_View4,        SIGNAL(triggered()), this, SLOT(slot_ac_View()));
    connect(ac_View5,        SIGNAL(triggered()), this, SLOT(slot_ac_View()));
    connect(ac_View6,        SIGNAL(triggered()), this, SLOT(slot_ac_View()));
 
    connect(ac_SelNC,        SIGNAL(triggered()), this, SLOT(slot_ac_Hardware()));
    connect(ac_SelFC,        SIGNAL(triggered()), this, SLOT(slot_ac_Hardware()));
    connect(ac_SelMag,       SIGNAL(triggered()), this, SLOT(slot_ac_Hardware()));
 
    connect(rb_SelNC,        SIGNAL(clicked()), this, SLOT(slot_rb_Hardware()));
    connect(rb_SelFC,        SIGNAL(clicked()), this, SLOT(slot_rb_Hardware()));
    connect(rb_SelMag,       SIGNAL(clicked()), this, SLOT(slot_rb_Hardware()));
 
    // firmeware Updateen / flashen
    connect(pb_Update,   SIGNAL(clicked()), this, SLOT(slot_pb_Update()));
    connect(pb_HexFile,  SIGNAL(clicked()), this, SLOT(slot_pb_HexFile()));
 
    // CVS-Record starten / stoppen
    connect(ac_RecordCSV,  SIGNAL(triggered()), this, SLOT(slot_RecordLog()));
 
    // Timer-Events
    connect(Ticker,   SIGNAL(timeout()),       SLOT(slot_Ticker()));
 
    // Seitenwechsel
    connect(tab_Main,             SIGNAL(currentChanged(int)), this, SLOT(slot_TabChanged(int)));
    connect(f_Settings->tab_Par,  SIGNAL(currentChanged(int)), this, SLOT(slot_TabChanged(int)));
 
    // About QMK & About-QT Dialog einfügen
    connect(ac_About, SIGNAL(triggered()), this, SLOT(slot_ac_About()));
    menu_Help->addAction(trUtf8("Über &Qt"), qApp, SLOT(aboutQt()));
}
 
void MKTool::init_Arrays()
{
    lb_Analog[0]  = lb_A_0;
    lb_Analog[1]  = lb_A_1;
    lb_Analog[2]  = lb_A_2;
    lb_Analog[3]  = lb_A_3;
    lb_Analog[4]  = lb_A_4;
    lb_Analog[5]  = lb_A_5;
    lb_Analog[6]  = lb_A_6;
    lb_Analog[7]  = lb_A_7;
    lb_Analog[8]  = lb_A_8;
    lb_Analog[9]  = lb_A_9;
    lb_Analog[10] = lb_A_10;
    lb_Analog[11] = lb_A_11;
    lb_Analog[12] = lb_A_12;
    lb_Analog[13] = lb_A_13;
    lb_Analog[14] = lb_A_14;
    lb_Analog[15] = lb_A_15;
    lb_Analog[16] = lb_A_16;
    lb_Analog[17] = lb_A_17;
    lb_Analog[18] = lb_A_18;
    lb_Analog[19] = lb_A_19;
    lb_Analog[20] = lb_A_20;
    lb_Analog[21] = lb_A_21;
    lb_Analog[22] = lb_A_22;
    lb_Analog[23] = lb_A_23;
    lb_Analog[24] = lb_A_24;
    lb_Analog[25] = lb_A_25;
    lb_Analog[26] = lb_A_26;
    lb_Analog[27] = lb_A_27;
    lb_Analog[28] = lb_A_28;
    lb_Analog[29] = lb_A_29;
    lb_Analog[30] = lb_A_30;
    lb_Analog[31] = lb_A_31;
}
 
void MKTool::init_Plot()
{
    NextPlot = 0;
 
    qwtPlot->setCanvasBackground(QColor(QRgb(0x00000000)));
 
    qwtPlot->insertLegend(new QwtLegend(), QwtPlot::RightLegend);
 
    QwtPlotGrid *Grid = new QwtPlotGrid();
    Grid->setMajPen(QPen(Qt::gray, 0, Qt::DotLine));
 
    Grid->attach(qwtPlot);
 
    qwtPlot->setAxisScale(QwtPlot::xBottom,0,Settings->Data.Plotter_Count,0);
 
    for (int a = 0; a < MaxAnalog; a++)
    {
        Plot[a] = new QwtPlotCurve(Settings->Analog1.Label[a]);
        Plot[a]->setPen(QPen(QColor(Def_Colors[a])));
        Plot[a]->setRenderHint(QwtPlotItem::RenderAntialiased);
 
        if (Settings->Analog1.PlotView[a])
            Plot[a]->attach(qwtPlot);
    }
    qwtPlot->replot();
}
 
 
void MKTool::slot_Test()
{
/*
    sRxData RX;
 
    RX.String = IN->text();
    RX.Input  = IN->text().toLatin1().data();
 
    new_RXData(RX);
*/
}
 
void MKTool::slot_ac_Hardware()
{
    QAction *Action = (QAction*)sender();
 
    if (Action->isChecked() == false)
    {
        Action->setChecked(true);
    }
 
    slot_rb_Hardware();
}
 
void MKTool::slot_rb_Hardware()
{
    if ((rb_SelNC->isChecked() == false) && (Mode.ID != ADDRESS_NC))
    {
        lb_Status->setText(tr("Schalte um auf NaviCtrl."));
        TX_Data[0] = 0x1B;
        TX_Data[1] = 0x1B;
        TX_Data[2] = 0x55;
        TX_Data[3] = 0xAA;
        TX_Data[4] = 0x00;
        TX_Data[5] = '\r';
        send_Data('#', ADDRESS_NC, TX_Data, 6, false);
        ToolBox::Wait(SLEEP);
    }
 
    if (rb_SelFC->isChecked())
    {
        lb_Status->setText(tr("Schalte um auf FlightCtrl."));
        TX_Data[0] = 0;
        send_Data('u', ADDRESS_NC, TX_Data, 1, false);
    }
    else
    if (rb_SelMag->isChecked())
    {
        lb_Status->setText(tr("Schalte um auf MK3MAG."));
        TX_Data[0] = 1;
        send_Data('u', ADDRESS_NC, TX_Data, 1, false);
    }
    else
    if (rb_SelNC->isChecked())
    {
        lb_Status->setText(tr("Schalte um auf NaviCtrl."));
        TX_Data[0] = 0x1B;
        TX_Data[1] = 0x1B;
        TX_Data[2] = 0x55;
        TX_Data[3] = 0xAA;
        TX_Data[4] = 0x00;
        TX_Data[5] = '\r';
        send_Data('#', ADDRESS_NC, TX_Data, 6, false);
    }
    ToolBox::Wait(SLEEP);
 
//    qDebug("Select RB Hardware");
    send_Data('v', ADDRESS_ALL, TX_Data, 0, true);
}
 
// Ticker-Event
///////////////
void MKTool::slot_Ticker()
{
    if (TickerDiv)
        TickerDiv = false;
    else
        TickerDiv = true;
 
    for (int a = 0; a < MaxTickerEvents; a++)
    {
        if (TickerEvent[a] == true)
        {
            switch(a)
            {
                case 0 :
                    if (TickerDiv)
                    {
                        QByteArray Temp(LastSend.toUtf8());
                        serialPort->sendData(Temp);
                    }
                break;
                case 1 :
                    TX_Data[0] = 0;
                    send_Data('p', ADDRESS_FC, TX_Data, 0, false);
                break;
                case 2 :
                    if (f_LCD->cb_LCD->isChecked())
                    {
                        if (!f_LCD->isVisible())
                        {
                            Ticker->setInterval(2000);
                            TickerEvent[2] = false;
                        }
                        TX_Data[0] = LCD_Page;
                        TX_Data[1] = 0;
                        send_Data('l', ADDRESS_ALL, TX_Data, 1, true);
                    }
                break;
                case 3 :
                    if (ac_FastDebug->isChecked())
                    {
                        TX_Data[0] = Settings->Data.Debug_Fast / 10;
                        send_Data('d', ADDRESS_ALL, TX_Data, 1, false);
                    }
                    else
                    {
                        TX_Data[0] = Settings->Data.Debug_Slow / 10;
                        send_Data('d', ADDRESS_ALL, TX_Data, 1, false);
                    }
                break;
            }
        }
    }
}
 
void MKTool::slot_QMKS_Connect()
{
    if (ac_QMKServer->isChecked())
    {
        lb_Status->setText(tr("Verbinde zum QMK-Datenserver."));
 
        MyServer->Connect("nimari.de", 16441, Settings->Server.QMKS_Login, Settings->Server.QMKS_Password);
        connect(MyServer, SIGNAL(sig_Connected()), this, SLOT(slot_QMKS_Connected()));
        connect(MyServer, SIGNAL(sig_Disconnected(int)), this, SLOT(slot_QMKS_Disconnected(int)));
 
    }
    else
    {
        if ((MyServer->property("Connect")) == true)
        {
            disconnect(MyServer, SIGNAL(sig_Disconnected(int)), 0, 0);
            lb_Status->setText(tr("Trenne vom QMK-Datenserver."));
 
            MyServer->Disconnect();
            MyServer->setProperty("Connect", false);
            ac_QMKServer->setText("QMK-Server Verbinden");
        }
    }
}
 
void MKTool::slot_QMKS_Connected()
{
    MyServer->setProperty("Connect", true);
    ac_QMKServer->setText("QMK-Server Trennnen");
    lb_Status->setText(tr("Verbunden mit QMK-Datenserver."));
}
 
void MKTool::slot_QMKS_Disconnected(int Error)
{
    MyServer->setProperty("Connect", false);
    ac_QMKServer->setText("QMK-Server Verbinden");
    ac_QMKServer->setChecked(false);
 
    disconnect(MyServer, SIGNAL(sig_Disconnected(int)), 0, 0);
 
    switch (Error)
    {
        case 1 :
        {
            lb_Status->setText(tr("Verbindung vom Server beendet."));
            QMessageBox::warning(this, QA_NAME,"QMK-Datenserver: Verbindung wurde vom Server beendet.", QMessageBox::Ok);
        }
        break;
        case 2 :
        {
            lb_Status->setText(tr("Server nicht gefunden."));
            QMessageBox::warning(this, QA_NAME,"QMK-Datenserver: Kann nicht zum Server verbinden.", QMessageBox::Ok);
        }
        break;
        case 3 :
        {
            lb_Status->setText(tr("Serververbindung getrennt. Logindaten falsch."));
            QMessageBox::warning(this, QA_NAME,"QMK-Datenserver: Loginname oder Password falsch.", QMessageBox::Ok);
        }
        break;
        default :
        {
            lb_Status->setText(tr("Getrennt vom QMK-Datenserver."));
        }
        break;
    }
}
 
// Slots der Actions (Menüpunkte, Buttons)
//////////////////////////////////////////
void MKTool::slot_ac_Motortest()
{
    dlg_Motortest *f_Motortest = new dlg_Motortest(this);
 
    connect(f_Motortest, SIGNAL(updateMotor(int, int, int, int)), this, SLOT(slot_Motortest(int, int, int, int)));
 
    if (f_Motortest->exec()==QDialog::Accepted)
    {
    }
 
    disconnect(f_Motortest, 0,0,0);
    slot_Motortest(0,0,0,0);
}
 
void MKTool::slot_ac_LCD()
{
    if (!f_LCD->isVisible())
    {
        f_LCD = new dlg_LCD(this);
 
        // LCD auf / ab
        connect(f_LCD->pb_LCDup,   SIGNAL(clicked()), this, SLOT(slot_LCD_UP()));
        connect(f_LCD->pb_LCDdown, SIGNAL(clicked()), this, SLOT(slot_LCD_DOWN()));
 
        f_LCD->show();
        TX_Data[0] = 0;
        TX_Data[1] = 0;
        send_Data('l', ADDRESS_ALL, TX_Data, 1, true);
 
        Ticker->setInterval(500);
        TickerEvent[2] = true;
    }
}
 
void MKTool::slot_Motortest(int Motor1, int Motor2, int Motor3, int Motor4)
{
    TX_Data[0] = Motor1;
    TX_Data[1] = Motor2;
    TX_Data[2] = Motor3;
    TX_Data[3] = Motor4;
    send_Data('t', ADDRESS_FC, TX_Data, 4, false);
}
 
void MKTool::slot_ac_Config()
{
    set_Analog Old_Analog1;
 
    Old_Analog1 = Settings->Analog1;
 
    dlg_Config *f_Config = new dlg_Config(this);
    f_Config->set_Settings(Settings, Mode.ID);
 
    if (f_Config->exec()==QDialog::Accepted)
    {
        Settings = f_Config->get_Settings();
        Settings->write_Settings_Analog(Mode.ID);
 
        // Plotter neu einrichten
        if (Old_Analog1.PlotView != Settings->Analog1.PlotView)
        {
            config_Plot();
        }
 
        // CVS-Datei neu anlegen.
        if ((logger->is_active()) && (Old_Analog1.LogView != Settings->Analog1.LogView))
        {
            logger->close();
            logger->start_Log();
//            update_Log();
        }
 
    }
}
 
//aktualisiere Logging-Status
void MKTool::update_Log()
{
    if (logger->is_active())
    {
//        logger->write(AnalogData);
//        pb_Record->setText("Log Stop");
        ac_RecordCSV->setText("Log Stop");
        lb_Status->setText(tr("Log-Record gestartet."));
    }
    else
    {
//        pb_Record->setText("Log Aufzeichnen");
        ac_RecordCSV->setText("Log Aufzeichnen");
        lb_Status->setText(tr("Log-Record gestopt."));
    }
}
 
//starte/stoppe Logging, wenn auf den entsprechenden Button gedrückt wurde
void MKTool::slot_RecordLog()
{
    if (!logger->is_active())
        logger->start_Log();
    else
        logger->close();
 
    update_Log();
}
 
void MKTool::slot_ac_Preferences()
{
    dlg_Preferences *f_Preferences = new dlg_Preferences(this);
 
    Settings->TTY.Port = le_Port->text();
    f_Preferences->set_Settings(Settings);
 
    if (f_Preferences->exec()==QDialog::Accepted)
    {
        Settings = f_Preferences->get_Settings();
        Settings->write_Settings();
        le_Port->setText(Settings->TTY.Port);
        config_Plot();
    }
}
 
void MKTool::slot_ac_StartPlotter()
{
    if (ac_StartPlotter->isChecked())
    {
        lb_Status->setText(tr("Datenplotter gestartet."));
        ac_StartPlotter->setText("Stop Plotter");
        pb_StartPlotter->setText("Stop Plotter");
    }
    else
    {
        lb_Status->setText(tr("Datenplotter gestopt."));
        ac_StartPlotter->setText("Start Plotter");
        pb_StartPlotter->setText("Start Plotter");
    }
}
 
void MKTool::slot_ac_View()
{
    int Aktive = -1;
 
    QAction *Action = (QAction*)sender();
 
    if (Action->objectName() == QString("ac_View0"))
        Aktive = 0;
    if (Action->objectName() == QString("ac_View1"))
        Aktive = 1;
    if (Action->objectName() == QString("ac_View2"))
        Aktive = 2;
    if (Action->objectName() == QString("ac_View3"))
        Aktive = 3;
    if (Action->objectName() == QString("ac_View4"))
        Aktive = 4;
    if (Action->objectName() == QString("ac_View5"))
        Aktive = 5;
//    if (Action->objectName() == QString("ac_View6"))
//        Aktive = 6;
 
    QString TabName = QString("Tab_%1").arg(Aktive);
 
    if (!Action->isChecked())
    {
        for (int a = 0; a < tab_Main->count(); a++)
        {
            if (tab_Main->widget(a)->objectName() == TabName)
            {
                tab_Main->removeTab(a);
            }
        }
    }
    else
    {
        tab_Main->insertTab(Aktive, TabWidgets[Aktive], Action->icon(), Action->text());
    }
}
 
void MKTool::slot_ac_FastNavi() // DONE NC 0.12i
{
    if (!ac_NoNavi->isChecked())
    {
        if (ac_FastNavi->isChecked())
        {
            lb_Status->setText(tr("Fordere schnelle NaviDaten an."));
            TX_Data[0] = Settings->Data.Navi_Fast / 10;
        }
        else
        {
            lb_Status->setText(tr("Fordere langsame NaviDaten an."));
            TX_Data[0] = Settings->Data.Navi_Slow / 10;
        }
        send_Data('o', ADDRESS_NC, TX_Data, 1, false);
    }
}
 
void MKTool::slot_ac_NoNavi() // DONE NC 0.12i
{
    if (ac_NoNavi->isChecked())
    {
        lb_Status->setText(tr("NaviDaten abstellen."));
        TX_Data[0] = 0;
    }
    else
    {
        if (ac_FastNavi->isChecked())
        {
            lb_Status->setText(tr("Fordere schnelle NaviDaten an."));
            TX_Data[0] = Settings->Data.Navi_Fast / 10;
        }
        else
        {
            lb_Status->setText(tr("Fordere langsame NaviDaten an."));
            TX_Data[0] = Settings->Data.Navi_Slow / 10;
        }
    }
    send_Data('o', ADDRESS_NC, TX_Data, 1, false);
}
 
void MKTool::slot_ac_FastDebug() // DONE 0.71g
{
    if (!ac_NoDebug->isChecked())
    {
        if (ac_FastDebug->isChecked())
        {
            lb_Status->setText(tr("Fordere schnelle DebugDaten an."));
            TX_Data[0] = Settings->Data.Debug_Fast / 10;
        }
        else
        {
            lb_Status->setText(tr("Fordere langsame DebugDaten an."));
            TX_Data[0] = Settings->Data.Debug_Slow / 10;
        }
        send_Data('d', ADDRESS_ALL, TX_Data, 1, false);
    }
}
 
void MKTool::slot_ac_NoDebug() // DONE 0.71g
{
    if (ac_NoDebug->isChecked())
    {
        lb_Status->setText(tr("DebugDaten abstellen."));
        TickerEvent[3] = false;
        TX_Data[0] = 0;
    }
    else
    {
        // Wenn MK3MAG dann andauernd Daten neu anfragen.
        if (Mode.ID == ADDRESS_MK3MAG)
            TickerEvent[3] = true;
 
        if (ac_FastDebug->isChecked())
        {
            lb_Status->setText(tr("Fordere schnelle DebugDaten an."));
            TX_Data[0] = Settings->Data.Debug_Fast / 10;
        }
        else
        {
            lb_Status->setText(tr("Fordere langsame DebugDaten an."));
            TX_Data[0] = Settings->Data.Debug_Slow / 10;
        }
    }
    send_Data('d', ADDRESS_ALL, TX_Data, 1, false);
}
 
void MKTool::slot_ac_About()
{
    QMessageBox::about(this, trUtf8(("Über ")) + QA_NAME, QA_ABOUT);
}
 
void MKTool::slot_ac_GetLabels() // DONE 0.71g
{
    lb_Status->setText(tr("Analoglabels auslesen."));
    TX_Data[0] = 0;
    send_Data('a', ADDRESS_ALL, TX_Data, 1, true);
}
 
void MKTool::slot_ac_StartServer()
{
    if (ac_StartServer->isChecked())
    {
        lb_Status->setText(tr("GoogleEarth-Server gestartet."));
        Server->start_Server(Settings->Server.Port.toInt(), Settings);
    }
    else
    {
        lb_Status->setText(tr("GoogleEarth-Server gestopt."));
        Server->stop_Server();
    }
}
 
 
//  Daten-Plotter
/////////////////
void MKTool::update_Plot()
{
    for (int a = 0; a < MaxAnalog; a++)
    {
        Plot[a]->setData(aID,aData[a],NextPlot - 1);
    }
 
    if ((NextPlot > Settings->Data.Plotter_Count))
    {
        scroll_plot->setMaximum(NextPlot - Settings->Data.Plotter_Count);
    }
 
    if ((scroll_plot->value() == NextPlot - (Settings->Data.Plotter_Count + 1)))
    {
        qwtPlot->setAxisScale(QwtPlot::xBottom,NextPlot - Settings->Data.Plotter_Count,NextPlot,0);
        scroll_plot->setValue(NextPlot - Settings->Data.Plotter_Count);
    }
 
    qwtPlot->replot();
}
 
void MKTool::config_Plot()
{
//    qDebug("Plotter rekonfiguriert..!!");
    qwtPlot->setAxisScale(QwtPlot::xBottom,0,Settings->Data.Plotter_Count,0);
 
    for (int a = 0; a < MaxAnalog; a++)
    {
        Plot[a]->detach();
        Plot[a]->setPen(QPen(QColor(Def_Colors[a])));
 
        if (Settings->Analog1.PlotView[a])
        {
            Plot[a]->setTitle(Settings->Analog1.Label[a]);
            Plot[a]->attach(qwtPlot);
        }
    }
    qwtPlot->replot();
}
 
void MKTool::slot_ScrollPlot(int Pos)
{
    qwtPlot->setAxisScale(QwtPlot::xBottom,Pos,Pos + Settings->Data.Plotter_Count,0);
    qwtPlot->replot();
}
 
 
// Firmeware-Update
///////////////////
void MKTool::slot_pb_Update()
{
    QString Device;
    QString Hardware;
 
    if (rb_FC->isChecked())
    {
        Device   = "m644";
        Hardware = "FlightCtrl";
    }
    else if (rb_MK3MAG->isChecked())
    {
        Device   = "m168";
        Hardware = "MK3MAG";
    }
    else if (rb_BL->isChecked())
    {
        Device   = "m8";
        Hardware = "BL-Ctrl";
    }
 
    QString Message = "Firmeware-Datei \n\n";
    Message = Message + le_HexFile->text() + "\n\n";
    Message = Message + "an " + Hardware + trUtf8(" mit AVRDUDE - Seriel & Bootloader über ") + le_Port->text() + trUtf8(" übertragen?\n");
 
    if (le_HexFile->text() == "")
    {
        QMessageBox::warning(this, QA_NAME, trUtf8("Bitte Firmeware-Datei wählen."), QMessageBox::Ok);
    }
    else if (QMessageBox::warning(this, QA_NAME, Message, QMessageBox::Yes | QMessageBox::No) == QMessageBox::Yes)
    {
        QString Programm = "avrdude" ;
 
        QStringList Argumente;
 
        Update = new QProcess();
 
        if (serialPort->isOpen())
        {
            slot_OpenPort();
        }
 
        Argumente << "-P";
        Argumente << le_Port->text();
        Argumente << "-p";
        Argumente << Device;
        Argumente << "-c";
        Argumente << "butterfly";
        Argumente << "-b";
        Argumente << "57600";
        Argumente << "-U";
        Argumente << "flash:w:" + le_HexFile->text();
 
//    QString Programm = "/home/Manuel/bin/avrdude -p m644 -P /dev/ttyS0 -c butterfly -b 57600 -U flash:w:/home/Manuel/Documents/Mikrokopter/Firmeware/FlightCtrl/Flight-Ctrl_MEGA644_V0_71h.hex";
 
        te_Shell->setText(""); // Ausgabefenster säubern
 
        connect(Update, SIGNAL(readyReadStandardOutput()), this, SLOT(slot_UpdateShell()) );
        connect(Update, SIGNAL(readyReadStandardError()), this, SLOT(slot_UpdateShell()) );
 
        Update->start(Programm, Argumente); // Programmaufruf
    }
}
 
void MKTool::slot_UpdateShell()
{
    QByteArray Output;
 
    Output = Update->readAllStandardError(); // Shellausgabe an Variable
    te_Shell->moveCursor(QTextCursor::End,  QTextCursor::MoveAnchor);
    te_Shell->insertPlainText(QString::fromUtf8(Output));
 
    Output = Update->readAll();
    te_Shell->moveCursor(QTextCursor::End,  QTextCursor::MoveAnchor);
    te_Shell->insertPlainText(QString::fromUtf8(Output));
}
 
void MKTool::slot_pb_HexFile()
{
    QString FileName = QFileDialog::getOpenFileName(this,trUtf8(("Firmeware-Datei wählen")),"",
                                tr("Intel Hex(*.hex);;Alle Dateien (*)"));
    if (!FileName.isEmpty())
    {
        le_HexFile->setText(FileName);
    }
}
 
 
// Wechsel der Tabs erkennen
void MKTool::slot_TabChanged(int Tab) // DONE 0.71g
{
    Tab = Tab;
    if (tab_Main->count() != 0)
    {
        if ((tab_Main->currentWidget()->objectName() == QString("Tab_2")) && (f_Settings->tab_Par->currentIndex() == 1))
        {
            TX_Data[0] = 0;
            send_Data('p', ADDRESS_FC, TX_Data, 0, true);
 
            Ticker->setInterval(500);
            TickerEvent[1] = true;
        }
        else
        {
            Ticker->setInterval(2000);
            TickerEvent[1] = false;
        }
/*
        if ((tab_Main->currentWidget()->objectName() == QString("Tab_4")))
        {
            TX_Data[0] = 0;
            TX_Data[1] = 0;
            send_Data('l', ADDRESS_ALL, TX_Data, 1, true);
 
            Ticker->setInterval(500);
            TickerEvent[2] = true;
        }
        else
        {
            Ticker->setInterval(2000);
            TickerEvent[2] = false;
        }
*/
    }
}
 
// LCD-Seiten weiterschalten
void MKTool::slot_LCD_UP() // DONE 0.71g
{
    if (LCD_Page == LCD_MAX_Page)
        TX_Data[0] = 0;
    else
        TX_Data[0] = LCD_Page + 1;
 
    TX_Data[1] = 0;
    send_Data('l', ADDRESS_ALL, TX_Data, 1, true);
 
}
 
void MKTool::slot_LCD_DOWN() // DONE 0.71g
{
    if (LCD_Page == 0)
        TX_Data[0] = LCD_MAX_Page;
    else
        TX_Data[0] = LCD_Page - 1;
 
    TX_Data[1] = 0;
    send_Data('l', ADDRESS_ALL, TX_Data, 1, true);
 
    aa--;
 
}
 
// Settings aus MK lesen / in MK schreiben
void MKTool::slot_GetFCSettings() // DONE 0.71g
{
    lb_Status->setText(tr("Lese FlightCtrl-Settings aus."));
    TX_Data[0] = f_Settings->sb_Set->value();
    TX_Data[1] = 0;
    send_Data('q', ADDRESS_FC, TX_Data, 1);
}
 
void MKTool::slot_SetFCSettings() // DONE 0.71g
{
    char *TX_Data2 = f_Settings->GetFCSettings();
 
    lb_Status->setText(tr("Schreibe FlightCtrl-Settings."));
 
    send_Data('s', ADDRESS_FC, TX_Data2, MaxParameter + 2, false);
}
 
 
// Save GUI-Preferences
///////////////////////
void MKTool::set_Preferences()
{
    Settings->GUI.TabViews.setBit(0, ac_View0->isChecked());
    Settings->GUI.TabViews.setBit(1, ac_View1->isChecked());
    Settings->GUI.TabViews.setBit(2, ac_View2->isChecked());
    Settings->GUI.TabViews.setBit(3, ac_View3->isChecked());
    Settings->GUI.TabViews.setBit(4, ac_View4->isChecked());
    Settings->GUI.TabViews.setBit(5, ac_View5->isChecked());
    Settings->GUI.TabViews.setBit(6, ac_View6->isChecked());
 
    Settings->GUI.ToolViews.setBit(0, tb_Allgemein->isVisibleTo(this));
    Settings->GUI.ToolViews.setBit(1, tb_Werkzeuge->isVisibleTo(this));
    Settings->GUI.ToolViews.setBit(2, tb_Debug->isVisibleTo(this));
    Settings->GUI.ToolViews.setBit(3, tb_TTY->isVisibleTo(this));
    Settings->GUI.ToolViews.setBit(4, tb_Hardware->isVisibleTo(this));
 
    Settings->GUI.Term_Info   = cb_ShowMSG->isChecked();
    Settings->GUI.Term_Data   = cb_ShowData->isChecked();
    Settings->GUI.Term_Always = cb_ShowAlways->isChecked();
    Settings->GUI.Term_Send   = cb_ShowSend->isChecked();
    Settings->GUI.isMax       = isMaximized();
    Settings->GUI.Size        = size();
    Settings->GUI.Point       = pos();
 
    Settings->TTY.Port = le_Port->text();
}
 
 
void MKTool::show_DebugData()
{
    if (logger->is_active())
        logger->write(AnalogData);
 
    if (ac_StartPlotter->isChecked())
    {
        aID[NextPlot] = NextPlot;
 
        for (int a = 0; a < MaxAnalog; a++)
        {
            aData[a][NextPlot] = AnalogData[a];
        }
        NextPlot++;
 
        if ((tab_Main->currentWidget()->objectName() == QString("Tab_1")))
            update_Plot();
    }
 
    le_A_0->setText(QString("%1").arg(AnalogData[0]));
    le_A_1->setText(QString("%1").arg(AnalogData[1]));
    le_A_2->setText(QString("%1").arg(AnalogData[2]));
    le_A_3->setText(QString("%1").arg(AnalogData[3]));
    le_A_4->setText(QString("%1").arg(AnalogData[4]));
    le_A_5->setText(QString("%1").arg(AnalogData[5]));
    le_A_6->setText(QString("%1").arg(AnalogData[6]));
    le_A_7->setText(QString("%1").arg(AnalogData[7]));
    le_A_8->setText(QString("%1").arg(AnalogData[8]));
    le_A_9->setText(QString("%1").arg(AnalogData[9]));
    le_A_10->setText(QString("%1").arg(AnalogData[10]));
    le_A_11->setText(QString("%1").arg(AnalogData[11]));
    le_A_12->setText(QString("%1").arg(AnalogData[12]));
    le_A_13->setText(QString("%1").arg(AnalogData[13]));
    le_A_14->setText(QString("%1").arg(AnalogData[14]));
    le_A_15->setText(QString("%1").arg(AnalogData[15]));
    le_A_16->setText(QString("%1").arg(AnalogData[16]));
    le_A_17->setText(QString("%1").arg(AnalogData[17]));
    le_A_18->setText(QString("%1").arg(AnalogData[18]));
    le_A_19->setText(QString("%1").arg(AnalogData[19]));
    le_A_20->setText(QString("%1").arg(AnalogData[20]));
    le_A_21->setText(QString("%1").arg(AnalogData[21]));
    le_A_22->setText(QString("%1").arg(AnalogData[22]));
    le_A_23->setText(QString("%1").arg(AnalogData[23]));
    le_A_24->setText(QString("%1").arg(AnalogData[24]));
    le_A_25->setText(QString("%1").arg(AnalogData[25]));
    le_A_26->setText(QString("%1").arg(AnalogData[26]));
    le_A_27->setText(QString("%1").arg(AnalogData[27]));
    le_A_28->setText(QString("%1").arg(AnalogData[28]));
    le_A_29->setText(QString("%1").arg(AnalogData[29]));
    le_A_30->setText(QString("%1").arg(AnalogData[30]));
    le_A_31->setText(QString("%1").arg(AnalogData[31]));
 
    if ((Mode.ID == ADDRESS_FC) && (FCSettings[P_GYRO_ACC_FAKTOR] > 0))
    {
        bar_UBAT->setValue(AnalogData[9]);
        bar_RX->setValue(AnalogData[10]);
 
        Compass->setValue(AnalogData[8]);
 
        int Roll = (AnalogData[1] * FCSettings[P_GYRO_ACC_FAKTOR]) / 1024;
        int Nick = (AnalogData[0] * FCSettings[P_GYRO_ACC_FAKTOR]) / 1024;
 
        if (Roll > 128)
            Roll = Roll - 255;
 
        if (Nick > 128)
            Nick = Nick - 255;
 
        Attitude->setAngle(Roll);
        Attitude->setGradient(double(double(Nick) / 100.0));
    }
}
 
 
void MKTool::new_NaviData(sRxData RX)
{
    Navi.Current.Longitude = ToolBox::Data2Long(RX.Decode, N_CUR_LONGITUDE, true);
    Navi.Current.Latitude  = ToolBox::Data2Long(RX.Decode, N_CUR_LATITUDE,  true);
    Navi.Current.Altitude  = ToolBox::Data2Long(RX.Decode, N_CUR_ALTITUDE,  true);
    Navi.Target.Longitude  = ToolBox::Data2Long(RX.Decode, N_TAR_LONGITUDE, true);
    Navi.Target.Latitude   = ToolBox::Data2Long(RX.Decode, N_TAR_LATITUDE,  true);
    Navi.Target.Altitude   = ToolBox::Data2Long(RX.Decode, N_TAR_ALTITUDE,  true);
 
    le_CDistance->setText(QString("%1 cm").arg(ToolBox::Data2Int(RX.Decode, N_HOME_DISTANCE)));
    le_CWPA->setText(QString("%1").arg(RX.Decode[N_WP_INDEX]));
    le_CWPT->setText(QString("%1").arg(RX.Decode[N_WP_NUMBER]));
    le_CSats->setText(QString("%1").arg(RX.Decode[N_SATS_IN_USER]));
 
    qwt_Rate->setValue(double(ToolBox::Data2Int(RX.Decode, N_VARIOMETER, true)));
 
    le_CTime->setText(QString("%1 sec.").arg(ToolBox::Data2Int(RX.Decode, N_FLYING_TIME)));
 
    bar_UBAT->setValue(RX.Decode[N_UBAT]);
 
    double Speed = double((ToolBox::Data2Int(RX.Decode, N_GROUND_SPEED)) / 10.0);
 
    if ((Speed > 4.5) && SpeedMeter->property("END") == 5)
    {
        SpeedMeter->setRange(0.0, 10.0);
        SpeedMeter->setScale(1, 2, 1);
        SpeedMeter->setProperty("END", 10);
    }
 
    if ((Speed > 9) && SpeedMeter->property("END") == 10)
    {
        SpeedMeter->setRange(0.0, 20.0);
        SpeedMeter->setScale(1, 2, 2);
        SpeedMeter->setProperty("END", 20);
    }
 
    SpeedMeter->setValue(Speed);
 
    Compass->setValue(ToolBox::Data2Int(RX.Decode, N_COMAPSS_HEADING)); //(68)
 
    bar_RX->setValue(RX.Decode[N_RC_QUALITY]);
 
    int Nick = RX.Decode[N_ANGLE_NICK];
    int Roll = RX.Decode[N_ANGLE_ROLL];
 
    if (Roll > 128)
        Roll = Roll - 255;
 
    if (Nick > 128)
        Nick = Nick - 255;
 
    Attitude->setAngle(Roll);
    Attitude->setGradient(double(0.0 - (double(Nick) / 100.0)));
 
    sNaviString NaviString;
 
    NaviString.Longitude = ToolBox::get_Float(Navi.Current.Longitude,10000000);
    NaviString.Latitude  = ToolBox::get_Float(Navi.Current.Latitude,10000000);
    NaviString.Altitude  = ToolBox::get_Float(Navi.Current.Altitude,1000);
 
    Server->store_NaviString(NaviString);
 
    if ((MyServer->property("Connect")) == true)
    {
        MyServer->NewPosition(NaviString);
    }
 
    /*
    qDebug(NaviString.Longitude.toLatin1().data());
    qDebug(NaviString.Latitude.toLatin1().data());
    qDebug(NaviString.Altitude.toLatin1().data());
    */
}
 
// Seriel-Port Bereich, Befehle senden und Daten empfangen
//////////////////////////////////////////////////////////
 
// Neues Datenpacket empfangen -> Verarbeiten
void MKTool::new_RXData(sRxData RX) // DONE 0.71g
{
 
    if (LastSend.length() > 2)
    {
    }
 
    int HardwareID = RX.Input[1] - 'a';
 
    switch(HardwareID)
    {
        case ADDRESS_FC :
            switch(RX.Input[2])
            {
                // Stick-Belegung der Fernsteuerung
                case 'P' : // DONE 0.71g
                    if (ToolBox::Decode64(RX))
                    {
                        f_Settings->pb_K1->setValue(ToolBox::Data2Int(RX.Decode,  2,true));
                        f_Settings->pb_K2->setValue(ToolBox::Data2Int(RX.Decode,  4,true));
                        f_Settings->pb_K3->setValue(ToolBox::Data2Int(RX.Decode,  6,true));
                        f_Settings->pb_K4->setValue(ToolBox::Data2Int(RX.Decode,  8,true));
                        f_Settings->pb_K5->setValue(ToolBox::Data2Int(RX.Decode, 10 ,true));
                        f_Settings->pb_K6->setValue(ToolBox::Data2Int(RX.Decode, 12,true));
                        f_Settings->pb_K7->setValue(ToolBox::Data2Int(RX.Decode, 14,true));
                        f_Settings->pb_K8->setValue(ToolBox::Data2Int(RX.Decode, 16,true));
                    }
                break;
                // Settings lesen
                case 'Q' : // DONE 0.71g
                    if (ToolBox::Decode64(RX))
                    {
                        TickerEvent[0] = false;
 
                        if (RX.Decode[1] == VERSION_SETTINGS)
                        {
                            int Settings_ID = RX.Decode[0];
                            for (int a = 0; a < MaxParameter; a++)
                            {
                                FCSettings[a] = RX.Decode[a + 2];
                            }
                            //show_ParameterSet(Settings_ID);
                            f_Settings->show_FCSettings(Settings_ID, FCSettings);
                            f_Settings->pb_Read->setEnabled(true);
                            f_Settings->pb_Write->setEnabled(true);
                        }
                        else
                        {
                            f_Settings->pb_Read->setDisabled(true);
                            f_Settings->pb_Write->setDisabled(true);
 
                            QMessageBox::warning(this, QA_NAME,
                                   "Versionen inkompatibel. \nParameterbearbeitung nicht moeglich.", QMessageBox::Ok);
                        }
                    }
                break;
                // Settings geschrieben
                case 'S' : // DONE 0.71g
                    TickerEvent[0] = false;
                break;
            }
 
        case ADDRESS_NC :
            switch(RX.Input[2])
            {
                // Navigationsdaten
                case 'O' : // NOT DONE 0.12h
                    if (ToolBox::Decode64(RX))
                    {
                        new_NaviData(RX);
                    }
                break;
            }
//        case ADDRESS_MK3MAG :
 
        default :
            switch(RX.Input[2])
            {
                // LCD-Anzeige
                case 'L' : // DONE 0.71g
                    if (ToolBox::Decode64(RX))
                    {
                        int LCD[150];
                        memcpy(LCD,RX.Decode, sizeof(RX.Decode));
 
                        f_LCD->show_Data(LCD);
 
                        LCD_Page     = RX.Decode[0];
                        LCD_MAX_Page = RX.Decode[1];
 
                        TickerEvent[0] = false;
                    }
                break;
                // Analoglabels
                case 'A' : // DONE 0.71g
                    if (ToolBox::Decode64(RX))
                    {
                        int Position = RX.Decode[0];
                        if (Position != 31)
                        {
                            Settings->Analog1.Label[Position] = ToolBox::Data2QString(RX.Decode,1,17).trimmed();
                            if (Settings->Analog1.Label[Position] == "")
                            {
                                Settings->Analog1.Label[Position] = "A-" + QString("%1").arg(Position);
                            }
                            Position ++;
                            TX_Data[0] = Position;
                            send_Data('a', ADDRESS_ALL, TX_Data, 1, true);
                        }
                        if (Position == 31)
                        {
                            for (int a = 0; a < MaxAnalog; a++)
                            {
                                lb_Analog[a]->setText(Settings->Analog1.Label[a]);
                            }
                            Settings->Analog1.Version = Mode.Version;
                            Settings->write_Settings_AnalogLabels(HardwareID);
                            config_Plot();
                        }
                    }
                break;
                // Debug-Daten
                case 'D' : // DONE 0.71g
                    if (ToolBox::Decode64(RX))
                    {
                        for (int i = 0; i < MaxAnalog; i++)
                        {
                            AnalogData[i] = ToolBox::Data2Int(RX.Decode, (i * 2) + 2);
                        }
                        show_DebugData();
                    }
                break;
                // Version
                case 'V' : // DONE 0.71h
                    if (ToolBox::Decode64(RX))
                    {
                        TickerEvent[0] = false;
 
                        Mode.ID            = HardwareID;
                        Mode.VERSION_MAJOR = RX.Decode[0];
                        Mode.VERSION_MINOR = RX.Decode[1];
                        Mode.VERSION_PATCH = RX.Decode[4];
                        Mode.VERSION_SERIAL_MAJOR = RX.Decode[2];
                        Mode.VERSION_SERIAL_MINOR = RX.Decode[3];
 
                        Mode.Hardware   = HardwareType[Mode.ID];
                        Mode.Version    = QString("%1").arg(RX.Decode[0]) + "." + QString("%1").arg(RX.Decode[1]) + QString(RX.Decode[4] + 'a');
 
                        setWindowTitle(QA_NAME + " v" + QA_VERSION + " - " + Mode.Hardware + " " + Mode.Version);
 
                        if (Mode.VERSION_SERIAL_MAJOR != VERSION_SERIAL_MAJOR)
                        {
                                AllowSend = false;
                                QMessageBox::warning(this, QA_NAME,
                                   "Serielles Protokoll Inkompatibel. \nBitte neue Programmversion installieren,", QMessageBox::Ok);
                        }
 
                        if (ac_NoDebug->isChecked())
                        {
                            TX_Data[0] = 0;
                        }
                        else
                        if (ac_FastDebug->isChecked())
                        {
                            TX_Data[0] = Settings->Data.Debug_Fast / 10;
                        }
                        else
                        {
                            TX_Data[0] = Settings->Data.Debug_Slow / 10;
                        }
 
                        send_Data('d', ADDRESS_ALL, TX_Data, 1, false);
 
                        // Wenn MK3MAG dann andauernd Daten neu anfragen.
                        if (Mode.ID == ADDRESS_MK3MAG)
                        {
                            TickerEvent[3] = true;
                            rb_SelMag->setChecked(true);
                        }
 
                        // Wenn NaviCtrl dann hier.
                        if (Mode.ID == ADDRESS_NC)
                        {
                            rb_SelNC->setChecked(true);
 
                            if (ac_NoNavi->isChecked())
                            {
                                TX_Data[0] = 0;
                            }
                            else
                            if (ac_FastNavi->isChecked())
                            {
                                TX_Data[0] = Settings->Data.Navi_Fast / 10;
                            }
                            else
                            {
                                TX_Data[0] = Settings->Data.Navi_Slow / 10;
                            }
 
                            send_Data('o', ADDRESS_NC, TX_Data, 1, false);
                        }
 
 
                        // Wenn FlightCtrl dann Settings abfragen.
                        if (Mode.ID == ADDRESS_FC)
                        {
                            rb_SelFC->setChecked(true);
                            {
                                TX_Data[0] = 0xff;
                                TX_Data[1] = 0;
                                send_Data('q', ADDRESS_FC, TX_Data, 1);
                            }
                        }
                        // Wenn nicht Lesen und Schreiben der Settings deaktivieren.
                        else
                        {
                                f_Settings->pb_Read->setDisabled(true);
                                f_Settings->pb_Write->setDisabled(true);
                        }
 
                        Settings->read_Settings_Analog(HardwareID);
                        Settings->read_Settings_AnalogLabels(HardwareID);
 
                        if (Settings->Analog1.Version != Mode.Version)
                        {
                            lb_Status->setText("Analoglabel-Version unterschiedlich. Lese Analoglabels neu aus.");
                            slot_ac_GetLabels();
                        }
                        else
                        for (int a = 0; a < MaxAnalog; a++)
                        {
                            lb_Analog[a]->setText(Settings->Analog1.Label[a]);
                        }
                        config_Plot();
                    }
                break;
            }
    }
}
 
// Neue Daten an der Schnittstelle
void MKTool::slot_newDataReceived(const QByteArray &dataReceived) // DONE 0.71g
{
    const char *RXt;
    RXt = dataReceived.data();
    int a = 0;
 
    while (RXt[a] != '\0')
    {
        if (RXt[a] == '\r')
        {
            while ((RxData.String.length() > 1) && (RxData.String.at(1) == '#'))
            {
                RxData.String.remove(0,1);
            }
 
            if (ToolBox::check_CRC(RxData.String))
            {
                RxData.Input = RxData.String.toLatin1().data();
                new_RXData(RxData);
 
                if ((cb_ShowData->isChecked()) && ((tab_Main->currentWidget()->objectName() == QString("Tab_3")) || (cb_ShowAlways->isChecked())))
                {
                    te_RX->moveCursor(QTextCursor::End,  QTextCursor::MoveAnchor);
//                    te_RX->insertPlainText(" > " + RxData.String + '\r');
                    te_RX->insertHtml("<span style=\"color:#00008b;\">" + RxData.String + "<br /></span>");
                }
            }
            else
            {
                if ((cb_ShowMSG->isChecked()) && ((tab_Main->currentWidget()->objectName() == QString("Tab_3")) || (cb_ShowAlways->isChecked())))
                {
                    te_RX->moveCursor(QTextCursor::End,  QTextCursor::MoveAnchor);
//                    te_RX->insertPlainText(" > " + RxData.String + '\r');
                    te_RX->insertHtml("<span style=\"color:#008b00;\">" + RxData.String + "<br /></span>");
                }
            }
            RxData.String = QString("");
        }
        else
        {
            {
                RxData.String = RxData.String + QString(RXt[a]);
            }
        }
        a++;
    }
}
 
// Seriellen Port öffnen
void MKTool::slot_OpenPort()
{
    if (serialPort->isOpen())
    {        
        TX_Data[0] = Settings->Data.Debug_Off / 10;
        send_Data('d', ADDRESS_ALL, TX_Data, 1, false);
        ToolBox::Wait(SLEEP);
 
        if (Mode.ID == ADDRESS_NC)
        {
            TX_Data[0] = Settings->Data.Navi_Off / 10;
            send_Data('o', ADDRESS_NC, TX_Data, 1, false);
            ToolBox::Wait(SLEEP);
        }
 
        if (Mode.ID == ADDRESS_NC)
        {
            TX_Data[0] = 0;
            TX_Data[1] = 0;
            TX_Data[2] = 0;
            TX_Data[3] = 0;
            send_Data('t', ADDRESS_FC, TX_Data, 4, false);
            ToolBox::Wait(SLEEP);
        }
        serialPort->close();
//        pb_Open->setText("Seriell Verbinden");
        ac_ConnectTTY->setText("Seriell Verbinden");
//        pb_Open->setIcon(ToolBox::Icon(9));
//        ac_ConnectTTY->setIcon(ToolBox::Icon(9));
 
        le_Port->setEnabled(true);
 
        Ticker->stop();
    }
    else
    {
        serialPort->setPort(le_Port->text()); //Port
 
        serialPort->setBaudRate(BAUD57600); //BaudRate
        serialPort->setDataBits(DATA_8); //DataBits
        serialPort->setParity(PAR_NONE); //Parity
        serialPort->setStopBits(STOP_1); //StopBits
        serialPort->setFlowControl(FLOW_OFF); //FlowControl
 
        serialPort->setTimeout(0, 10);
        serialPort->enableSending();
        serialPort->enableReceiving();
 
        serialPort->open();
        if (serialPort->isOpen())
        {
            le_Port->setEnabled(false);
            serialPort->receiveData();
 
            send_Data('v', ADDRESS_ALL, TX_Data, 0, true);
 
//            pb_Open->setText("Seriell Trennen");
            ac_ConnectTTY->setText("Seriell Trennen");
//            pb_Open->setIcon(ToolBox::Icon(8));
//            ac_ConnectTTY->setIcon(ToolBox::Icon(8));
 
            Ticker->start(2000);
        }
    }
}
 
// Daten senden
void MKTool::send_Data(char CMD, int Address, char Data[150],unsigned int Length, bool Resend) // DONE 0.71g
{
    if (serialPort->isOpen() && AllowSend)
    {
        QByteArray Temp;
        QString TX_Data;
 
        if (CMD != '#')
        {
//            qDebug("Send data..");
            TX_Data = ToolBox::Encode64(Data, Length);
 
            TX_Data = QString("#") + (QString('a' + Address)) + QString(CMD) + TX_Data;
 
//    qDebug(TX_Data.toLatin1().data());
 
            TX_Data = ToolBox::add_CRC(TX_Data) + '\r';
 
//    qDebug(TX_Data.toLatin1().data());
 
            if (Resend)
            {
                LastSend = TX_Data;
                TickerEvent[0] = true;
            }
            Temp = QByteArray(TX_Data.toUtf8());
        }
        else
        {
//            qDebug("Send Raw..");
            for (unsigned int a = 0; a < Length; a++)
            {
                Temp[a] = Data[a];
//                qDebug(QString("%1").arg(Temp[a]).toLatin1().data());
            }
        }
 
        serialPort->sendData(Temp);
 
        if (cb_ShowSend->isChecked() && (CMD != '#'))
        {
            te_RX->moveCursor(QTextCursor::End,  QTextCursor::MoveAnchor);
            te_RX->insertHtml("<span style='color:#8b0000;'>" + TX_Data + "<br /></span>");
        }
    }
}
 
 
// Programm beenden
///////////////////
 
MKTool::~MKTool()
{
//    qDebug(" Programm Ende ..!! ");
    if (serialPort->isOpen())
    {
        serialPort->close();
    }
 
    set_Preferences();
    Settings->write_Settings();
 
    logger->close();
}
 

Rev 241	Rev 246
1	/***************************************************************************	1	/***************************************************************************
2	* Copyright (C) 2008 by Manuel Schrape *	2	* Copyright (C) 2008 by Manuel Schrape *
3	* manuel.schrape@gmx.de *	3	* manuel.schrape@gmx.de *
4	* *	4	* *
5	* This program is free software; you can redistribute it and/or modify *	5	* This program is free software; you can redistribute it and/or modify *
6	* it under the terms of the GNU General Public License as published by *	6	* it under the terms of the GNU General Public License as published by *
7	* the Free Software Foundation; either version 2 of the License. *	7	* the Free Software Foundation; either version 2 of the License. *
8	* *	8	* *
9	* This program is distributed in the hope that it will be useful, *	9	* This program is distributed in the hope that it will be useful, *
10	* but WITHOUT ANY WARRANTY; without even the implied warranty of *	10	* but WITHOUT ANY WARRANTY; without even the implied warranty of *
11	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *	11	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
12	* GNU General Public License for more details. *	12	* GNU General Public License for more details. *
13	* *	13	* *
14	* You should have received a copy of the GNU General Public License *	14	* You should have received a copy of the GNU General Public License *
15	* along with this program; if not, write to the *	15	* along with this program; if not, write to the *
16	* Free Software Foundation, Inc., *	16	* Free Software Foundation, Inc., *
17	* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *	17	* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
18	***************************************************************************/	18	***************************************************************************/
19		19
20	#include <QtGui>	20	#include <QtGui>
21		21
22	#include <QLineEdit>	22	#include <QLineEdit>
23	#include <QString>	23	#include <QString>
24	#include <QTimer>	24	#include <QTimer>
25	#include <QIcon>	25	#include <QIcon>
26	#include <QToolButton>	26	#include <QToolButton>
27	#include <QSpinBox>	27	#include <QSpinBox>
28	#include <QAction>	28	#include <QAction>
29	#include <QPalette>	29	#include <QPalette>
30		30
31	#include "mktool.h"	31	#include "mktool.h"
32	#include "dlg_Config.h"	32	#include "dlg_Config.h"
33	#include "dlg_Motortest.h"	33	#include "dlg_Motortest.h"
34	#include "dlg_Preferences.h"	34	#include "dlg_Preferences.h"
35	#include "../global.h"	35	#include "../global.h"
36	#include "../Classes/ToolBox.h"	36	#include "../Classes/ToolBox.h"
37		37
38	#include <stdlib.h>	38	#include <stdlib.h>
39		39
40	MKTool::MKTool()	40	MKTool::MKTool()
41	{	41	{
42	setupUi(this);	42	setupUi(this);
43		43
44	Settings = new cSettings;	44	Settings = new cSettings;
45		45
46	init_Arrays();	46	init_Arrays();
47	init_GUI();	47	init_GUI();
48		48
49	init_Objects();	49	init_Objects();
50	init_Connections();	50	init_Connections();
51		51
52	init_Plot();	52	init_Plot();
53	}	53	}
54		54
55	void MKTool::init_GUI()	55	void MKTool::init_GUI()
56	{	56	{
57	setWindowTitle(QA_NAME + " v" + QA_VERSION);	57	setWindowTitle(QA_NAME + " v" + QA_VERSION);
58		58
59	// Tab mit Debug-Elementen verbergen	59	// Tab mit Debug-Elementen verbergen
60	tab_Main->removeTab(6);	60	tab_Main->removeTab(6);
61		61
62	// Tab mit Wegpunkte-Elementen verbergen	62	// Tab mit Wegpunkte-Elementen verbergen
63	tab_Main->removeTab(5);	63	tab_Main->removeTab(5);
64		64
65	// Settings-Tab hinzufügen.	65	// Settings-Tab hinzufügen.
66	f_Settings = new wdg_Settings( this );	66	f_Settings = new wdg_Settings( this );
67	f_Settings->set_Config(Settings);	67	f_Settings->set_Config(Settings);
68	tab_Main->insertTab ( 2, f_Settings, ac_View2->icon(), "FC-Settings");	68	tab_Main->insertTab ( 2, f_Settings, ac_View2->icon(), "FC-Settings");
69	tab_Main->widget(2)->setObjectName("Tab_2");	69	tab_Main->widget(2)->setObjectName("Tab_2");
70		70
71	// Develop - Nicht gebrauchte sachen abschalten.	71	// Develop - Nicht gebrauchte sachen abschalten.
72	pb_SettingsReset->hide();	72	pb_SettingsReset->hide();
73	pb_Flash->hide();	73	pb_Flash->hide();
74	rb_NC->hide();	74	rb_NC->hide();
75		75
76	// Zusätzliche Widgets in die Toolbar.	76	// Zusätzliche Widgets in die Toolbar.
77	tb_TTY->addWidget(lb_Port);	77	tb_TTY->addWidget(lb_Port);
78	tb_TTY->addWidget(le_Port);	78	tb_TTY->addWidget(le_Port);
79		79
80	tb_Hardware->addWidget(rb_SelFC);	80	tb_Hardware->addWidget(rb_SelFC);
81	tb_Hardware->addWidget(rb_SelNC);	81	tb_Hardware->addWidget(rb_SelNC);
82	tb_Hardware->addWidget(rb_SelMag);	82	tb_Hardware->addWidget(rb_SelMag);
83		83
84	tb_Allgemein->setVisible(Settings->GUI.ToolViews[0]);	84	tb_Allgemein->setVisible(Settings->GUI.ToolViews[0]);
85	tb_Werkzeuge->setVisible(Settings->GUI.ToolViews[1]);	85	tb_Werkzeuge->setVisible(Settings->GUI.ToolViews[1]);
86	tb_Debug->setVisible(Settings->GUI.ToolViews[2]);	86	tb_Debug->setVisible(Settings->GUI.ToolViews[2]);
87	tb_TTY->setVisible(Settings->GUI.ToolViews[3]);	87	tb_TTY->setVisible(Settings->GUI.ToolViews[3]);
88	tb_Hardware->setVisible(Settings->GUI.ToolViews[4]);	88	tb_Hardware->setVisible(Settings->GUI.ToolViews[4]);
89		89
90	lb_Status->setText(tr("Hallo bei QMK-Groundstation...!!!"));	90	lb_Status->setText(tr("Hallo bei QMK-Groundstation...!!!"));
91		91
92	QPalette newPalette;	92	QPalette newPalette;
93		93
94	newPalette.setColor(QPalette::Base, Qt::darkBlue);	94	newPalette.setColor(QPalette::Base, Qt::darkBlue);
95	newPalette.setColor(QPalette::Foreground, QColor(Qt::darkBlue).dark(120));	95	newPalette.setColor(QPalette::Foreground, QColor(Qt::darkBlue).dark(120));
96	newPalette.setColor(QPalette::Text, Qt::white);	96	newPalette.setColor(QPalette::Text, Qt::white);
97		97
98	Compass->setScaleOptions(QwtDial::ScaleTicks \| QwtDial::ScaleLabel);	98	Compass->setScaleOptions(QwtDial::ScaleTicks \| QwtDial::ScaleLabel);
99	Compass->setScaleTicks(0, 0, 3);	99	Compass->setScaleTicks(0, 0, 3);
100	Compass->setScale(36, 5, 0);	100	Compass->setScale(36, 5, 0);
101		101
102	// Compass->setNeedle(new QwtCompassMagnetNeedle(QwtCompassMagnetNeedle::ThinStyle));	102	// Compass->setNeedle(new QwtCompassMagnetNeedle(QwtCompassMagnetNeedle::ThinStyle));
103	Compass->setNeedle(new QwtDialSimpleNeedle(QwtDialSimpleNeedle::Arrow, true, Qt::red, QColor(Qt::gray).light(130)));	103	Compass->setNeedle(new QwtDialSimpleNeedle(QwtDialSimpleNeedle::Arrow, true, Qt::red, QColor(Qt::gray).light(130)));
104	Compass->setPalette(newPalette);	104	Compass->setPalette(newPalette);
105	Compass->setMaximumSize(QSize(MeterSize, MeterSize));	105	Compass->setMaximumSize(QSize(MeterSize, MeterSize));
106	Compass->setMinimumSize(QSize(MeterSize, MeterSize));	106	Compass->setMinimumSize(QSize(MeterSize, MeterSize));
107		107
108	QPalette newPalette1;	108	QPalette newPalette1;
109		109
110	newPalette1.setColor(QPalette::Base, Qt::darkBlue);	110	newPalette1.setColor(QPalette::Base, Qt::darkBlue);
111	newPalette1.setColor(QPalette::Foreground, QColor(255,128,0).dark(120));	111	newPalette1.setColor(QPalette::Foreground, QColor(255,128,0).dark(120));
112	newPalette1.setColor(QPalette::Text, Qt::white);	112	newPalette1.setColor(QPalette::Text, Qt::white);
113		113
114	Attitude = new AttitudeIndicator(this);	114	Attitude = new AttitudeIndicator(this);
115	Attitude->setMaximumSize(QSize(MeterSize, MeterSize));	115	Attitude->setMaximumSize(QSize(MeterSize, MeterSize));
116	Attitude->setMinimumSize(QSize(MeterSize, MeterSize));	116	Attitude->setMinimumSize(QSize(MeterSize, MeterSize));
117	Attitude->setPalette(newPalette1);	117	Attitude->setPalette(newPalette1);
118		118
119	verticalLayout->addWidget(Attitude);	119	verticalLayout->addWidget(Attitude);
120		120
121	qwt_Rate->setRange(-10.0, 10.0, 0.1, 0);	121	qwt_Rate->setRange(-10.0, 10.0, 0.1, 0);
122		122
123	newPalette1.setColor(QPalette::Foreground, QColor(Qt::darkBlue).dark(120));	123	newPalette1.setColor(QPalette::Foreground, QColor(Qt::darkBlue).dark(120));
124		124
125	SpeedMeter = new cSpeedMeter(this);	125	SpeedMeter = new cSpeedMeter(this);
126	SpeedMeter->setMaximumSize(QSize(MeterSize, MeterSize));	126	SpeedMeter->setMaximumSize(QSize(MeterSize, MeterSize));
127	SpeedMeter->setMinimumSize(QSize(MeterSize, MeterSize));	127	SpeedMeter->setMinimumSize(QSize(MeterSize, MeterSize));
128	SpeedMeter->setPalette(newPalette1);	128	SpeedMeter->setPalette(newPalette1);
129	SpeedMeter->setRange(0.0, 5.0);	129	SpeedMeter->setRange(0.0, 5.0);
130	SpeedMeter->setScale(1, 2, 0.5);	130	SpeedMeter->setScale(1, 2, 0.5);
131	SpeedMeter->setProperty("END", 5);	131	SpeedMeter->setProperty("END", 5);
132		132
133	LayOut_Speed->addWidget(SpeedMeter);	133	LayOut_Speed->addWidget(SpeedMeter);
134		134
135	#ifdef _EEEPC_	135	#ifdef _EEEPC_
136	lb_Status->hide();	136	lb_Status->hide();
137	#endif	137	#endif
138		138
139	resize(Settings->GUI.Size);	139	resize(Settings->GUI.Size);
140	move(Settings->GUI.Point);	140	move(Settings->GUI.Point);
141		141
142	if (Settings->GUI.isMax)	142	if (Settings->GUI.isMax)
143	{	143	{
144	showMaximized();	144	showMaximized();
145	}	145	}
146		146
147	// Analoglabels anzeigen	147	// Analoglabels anzeigen
148	for (int a = 0; a < MaxAnalog; a++)	148	for (int a = 0; a < MaxAnalog; a++)
149	{	149	{
150	lb_Analog[a]->setText(Settings->Analog1.Label[a]);	150	lb_Analog[a]->setText(Settings->Analog1.Label[a]);
151	}	151	}
152		152
153	// Kopie der Tabs anlegen	153	// Kopie der Tabs anlegen
154	// for (int b = 0; b < 7; b++)	154	// for (int b = 0; b < 7; b++)
155	for (int b = 0; b < 6; b++)	155	for (int b = 0; b < 6; b++)
156	{	156	{
157	TabWidgets[b] = tab_Main->widget(b);	157	TabWidgets[b] = tab_Main->widget(b);
158	}	158	}
159		159
160	// Ausgeblendete Tabs ausblenden	160	// Ausgeblendete Tabs ausblenden
161	// for (int c = 0; c < 7; c++)	161	// for (int c = 0; c < 7; c++)
162	for (int c = 0; c < 6; c++)	162	for (int c = 0; c < 6; c++)
163	{	163	{
164	if (Settings->GUI.TabViews[c] == false)	164	if (Settings->GUI.TabViews[c] == false)
165	{	165	{
166	QString TabName = QString("Tab_%1").arg(c);	166	QString TabName = QString("Tab_%1").arg(c);
167		167
168	for (int d = 0; d < tab_Main->count(); d++)	168	for (int d = 0; d < tab_Main->count(); d++)
169	{	169	{
170	if (tab_Main->widget(d)->objectName() == TabName)	170	if (tab_Main->widget(d)->objectName() == TabName)
171	{	171	{
172	tab_Main->removeTab(d);	172	tab_Main->removeTab(d);
173	}	173	}
174	}	174	}
175	}	175	}
176	}	176	}
177		177
178	ac_View0->setChecked(Settings->GUI.TabViews[0]);	178	ac_View0->setChecked(Settings->GUI.TabViews[0]);
179	ac_View1->setChecked(Settings->GUI.TabViews[1]);	179	ac_View1->setChecked(Settings->GUI.TabViews[1]);
180	ac_View2->setChecked(Settings->GUI.TabViews[2]);	180	ac_View2->setChecked(Settings->GUI.TabViews[2]);
181	ac_View3->setChecked(Settings->GUI.TabViews[3]);	181	ac_View3->setChecked(Settings->GUI.TabViews[3]);
182	ac_View4->setChecked(Settings->GUI.TabViews[4]);	182	ac_View4->setChecked(Settings->GUI.TabViews[4]);
183	ac_View5->setChecked(Settings->GUI.TabViews[5]);	183	ac_View5->setChecked(Settings->GUI.TabViews[5]);
184	// ac_View6->setChecked(Settings->GUI.TabViews[6]);	184	// ac_View6->setChecked(Settings->GUI.TabViews[6]);
185		185
186	le_Port->setText(Settings->TTY.Port);	186	le_Port->setText(Settings->TTY.Port);
187		187
188	cb_ShowMSG->setChecked(Settings->GUI.Term_Info);	188	cb_ShowMSG->setChecked(Settings->GUI.Term_Info);
189	cb_ShowData->setChecked(Settings->GUI.Term_Data);	189	cb_ShowData->setChecked(Settings->GUI.Term_Data);
190	cb_ShowAlways->setChecked(Settings->GUI.Term_Always);	190	cb_ShowAlways->setChecked(Settings->GUI.Term_Always);
191	}	191	}
192		192
193	void MKTool::init_Objects()	193	void MKTool::init_Objects()
194	{	194	{
195	// QTimer-Instanzen	195	// QTimer-Instanzen
196	Ticker = new QTimer(this);	196	Ticker = new QTimer(this);
197		197
198	// Seriell-Port	198	// Seriell-Port
199	serialPort = new ManageSerialPort;	199	serialPort = new ManageSerialPort;
200		200
201	// neuer Logger	201	// neuer Logger
202	logger = new Logger(Settings, &Mode);	202	logger = new Logger(Settings, &Mode);
203		203
204	// LCD-Dialog	204	// LCD-Dialog
205	f_LCD = new dlg_LCD(this);	205	f_LCD = new dlg_LCD(this);
206		206
207	// Senden erlauben (Warum auch immer)	207	// Senden erlauben (Warum auch immer)
208	AllowSend = true;	208	AllowSend = true;
209		209
210	Server = new cServer();	210	Server = new cServer();
211		211
212	MyServer = new cQMK_Server();	212	MyServer = new cQMK_Server();
213	MyServer->setProperty("Connect", false);	213	MyServer->setProperty("Connect", false);
214		214
215		215
216	if (Settings->Server.StartServer)	216	if (Settings->Server.StartServer)
217	{	217	{
218	ac_StartServer->setChecked(true);	218	ac_StartServer->setChecked(true);
219	Server->start_Server(Settings->Server.Port.toInt(), Settings);	219	Server->start_Server(Settings->Server.Port.toInt(), Settings);
220	}	220	}
221	}	221	}
222		222
223	void MKTool::init_Connections()	223	void MKTool::init_Connections()
224	{	224	{
225	connect(Dec, SIGNAL(clicked()), this, SLOT(slot_Test()));	225	connect(Dec, SIGNAL(clicked()), this, SLOT(slot_Test()));
226		226
227	// Seriel-Port Empfang	227	// Seriel-Port Empfang
228	connect(serialPort, SIGNAL(newDataReceived(const QByteArray &)), this, SLOT(slot_newDataReceived(const QByteArray &)));	228	connect(serialPort, SIGNAL(newDataReceived(const QByteArray &)), this, SLOT(slot_newDataReceived(const QByteArray &)));
229		229
230	// Serielle Verbundung öffnen / schließen	230	// Serielle Verbundung öffnen / schließen
231	connect(ac_ConnectTTY, SIGNAL(triggered()), this, SLOT(slot_OpenPort()));	231	connect(ac_ConnectTTY, SIGNAL(triggered()), this, SLOT(slot_OpenPort()));
232		232
233	// TCP-Connection verbinden / trennen	233	// TCP-Connection verbinden / trennen
234	connect(ac_QMKServer, SIGNAL(triggered()), this, SLOT(slot_QMKS_Connect()));	234	connect(ac_QMKServer, SIGNAL(triggered()), this, SLOT(slot_QMKS_Connect()));
235		235
236	// Buttons Settings lesen / schreiben	236	// Buttons Settings lesen / schreiben
237	connect(f_Settings->pb_Read, SIGNAL(clicked()), this, SLOT(slot_GetFCSettings()));	237	connect(f_Settings->pb_Read, SIGNAL(clicked()), this, SLOT(slot_GetFCSettings()));
238	connect(f_Settings->pb_Write, SIGNAL(clicked()), this, SLOT(slot_SetFCSettings()));	238	connect(f_Settings->pb_Write, SIGNAL(clicked()), this, SLOT(slot_SetFCSettings()));
239		239
240	// Actions	240	// Actions
241	connect(ac_Config, SIGNAL(triggered()), this, SLOT(slot_ac_Config()));	241	connect(ac_Config, SIGNAL(triggered()), this, SLOT(slot_ac_Config()));
242	connect(ac_Preferences, SIGNAL(triggered()), this, SLOT(slot_ac_Preferences()));	242	connect(ac_Preferences, SIGNAL(triggered()), this, SLOT(slot_ac_Preferences()));
243	connect(ac_Motortest, SIGNAL(triggered()), this, SLOT(slot_ac_Motortest()));	243	connect(ac_Motortest, SIGNAL(triggered()), this, SLOT(slot_ac_Motortest()));
244	connect(ac_LCD, SIGNAL(triggered()), this, SLOT(slot_ac_LCD()));	244	connect(ac_LCD, SIGNAL(triggered()), this, SLOT(slot_ac_LCD()));
245	connect(ac_FastDebug, SIGNAL(triggered()), this, SLOT(slot_ac_FastDebug()));	245	connect(ac_FastDebug, SIGNAL(triggered()), this, SLOT(slot_ac_FastDebug()));
246	connect(ac_NoDebug, SIGNAL(triggered()), this, SLOT(slot_ac_NoDebug()));	246	connect(ac_NoDebug, SIGNAL(triggered()), this, SLOT(slot_ac_NoDebug()));
247	connect(ac_FastNavi, SIGNAL(triggered()), this, SLOT(slot_ac_FastNavi()));	247	connect(ac_FastNavi, SIGNAL(triggered()), this, SLOT(slot_ac_FastNavi()));
248	connect(ac_NoNavi, SIGNAL(triggered()), this, SLOT(slot_ac_NoNavi()));	248	connect(ac_NoNavi, SIGNAL(triggered()), this, SLOT(slot_ac_NoNavi()));
249	connect(ac_GetLabels, SIGNAL(triggered()), this, SLOT(slot_ac_GetLabels()));	249	connect(ac_GetLabels, SIGNAL(triggered()), this, SLOT(slot_ac_GetLabels()));
250		250
251	// Plotter starten / scrollen	251	// Plotter starten / scrollen
252	connect(scroll_plot, SIGNAL(valueChanged(int)), this, SLOT(slot_ScrollPlot(int)));	252	connect(scroll_plot, SIGNAL(valueChanged(int)), this, SLOT(slot_ScrollPlot(int)));
253	connect(ac_StartPlotter, SIGNAL(triggered()), this, SLOT(slot_ac_StartPlotter()));	253	connect(ac_StartPlotter, SIGNAL(triggered()), this, SLOT(slot_ac_StartPlotter()));
254	connect(ac_StartServer, SIGNAL(triggered()), this, SLOT(slot_ac_StartServer()));	254	connect(ac_StartServer, SIGNAL(triggered()), this, SLOT(slot_ac_StartServer()));
255		255
256	// Tabs ein & ausblenden	256	// Tabs ein & ausblenden
257	connect(ac_View0, SIGNAL(triggered()), this, SLOT(slot_ac_View()));	257	connect(ac_View0, SIGNAL(triggered()), this, SLOT(slot_ac_View()));
258	connect(ac_View1, SIGNAL(triggered()), this, SLOT(slot_ac_View()));	258	connect(ac_View1, SIGNAL(triggered()), this, SLOT(slot_ac_View()));
259	connect(ac_View2, SIGNAL(triggered()), this, SLOT(slot_ac_View()));	259	connect(ac_View2, SIGNAL(triggered()), this, SLOT(slot_ac_View()));
260	connect(ac_View3, SIGNAL(triggered()), this, SLOT(slot_ac_View()));	260	connect(ac_View3, SIGNAL(triggered()), this, SLOT(slot_ac_View()));
261	connect(ac_View4, SIGNAL(triggered()), this, SLOT(slot_ac_View()));	261	connect(ac_View4, SIGNAL(triggered()), this, SLOT(slot_ac_View()));
262	connect(ac_View5, SIGNAL(triggered()), this, SLOT(slot_ac_View()));	262	connect(ac_View5, SIGNAL(triggered()), this, SLOT(slot_ac_View()));
263	connect(ac_View6, SIGNAL(triggered()), this, SLOT(slot_ac_View()));	263	connect(ac_View6, SIGNAL(triggered()), this, SLOT(slot_ac_View()));
264		264
265	connect(ac_SelNC, SIGNAL(triggered()), this, SLOT(slot_ac_Hardware()));	265	connect(ac_SelNC, SIGNAL(triggered()), this, SLOT(slot_ac_Hardware()));
266	connect(ac_SelFC, SIGNAL(triggered()), this, SLOT(slot_ac_Hardware()));	266	connect(ac_SelFC, SIGNAL(triggered()), this, SLOT(slot_ac_Hardware()));
267	connect(ac_SelMag, SIGNAL(triggered()), this, SLOT(slot_ac_Hardware()));	267	connect(ac_SelMag, SIGNAL(triggered()), this, SLOT(slot_ac_Hardware()));
268		268
269	connect(rb_SelNC, SIGNAL(clicked()), this, SLOT(slot_rb_Hardware()));	269	connect(rb_SelNC, SIGNAL(clicked()), this, SLOT(slot_rb_Hardware()));
270	connect(rb_SelFC, SIGNAL(clicked()), this, SLOT(slot_rb_Hardware()));	270	connect(rb_SelFC, SIGNAL(clicked()), this, SLOT(slot_rb_Hardware()));
271	connect(rb_SelMag, SIGNAL(clicked()), this, SLOT(slot_rb_Hardware()));	271	connect(rb_SelMag, SIGNAL(clicked()), this, SLOT(slot_rb_Hardware()));
272		272
273	// firmeware Updateen / flashen	273	// firmeware Updateen / flashen
274	connect(pb_Update, SIGNAL(clicked()), this, SLOT(slot_pb_Update()));	274	connect(pb_Update, SIGNAL(clicked()), this, SLOT(slot_pb_Update()));
275	connect(pb_HexFile, SIGNAL(clicked()), this, SLOT(slot_pb_HexFile()));	275	connect(pb_HexFile, SIGNAL(clicked()), this, SLOT(slot_pb_HexFile()));
276		276
277	// CVS-Record starten / stoppen	277	// CVS-Record starten / stoppen
278	connect(ac_RecordCSV, SIGNAL(triggered()), this, SLOT(slot_RecordLog()));	278	connect(ac_RecordCSV, SIGNAL(triggered()), this, SLOT(slot_RecordLog()));
279		279
280	// Timer-Events	280	// Timer-Events
281	connect(Ticker, SIGNAL(timeout()), SLOT(slot_Ticker()));	281	connect(Ticker, SIGNAL(timeout()), SLOT(slot_Ticker()));
282		282
283	// Seitenwechsel	283	// Seitenwechsel
284	connect(tab_Main, SIGNAL(currentChanged(int)), this, SLOT(slot_TabChanged(int)));	284	connect(tab_Main, SIGNAL(currentChanged(int)), this, SLOT(slot_TabChanged(int)));
285	connect(f_Settings->tab_Par, SIGNAL(currentChanged(int)), this, SLOT(slot_TabChanged(int)));	285	connect(f_Settings->tab_Par, SIGNAL(currentChanged(int)), this, SLOT(slot_TabChanged(int)));
286		286
287	// About QMK & About-QT Dialog einfügen	287	// About QMK & About-QT Dialog einfügen
288	connect(ac_About, SIGNAL(triggered()), this, SLOT(slot_ac_About()));	288	connect(ac_About, SIGNAL(triggered()), this, SLOT(slot_ac_About()));
289	menu_Help->addAction(trUtf8("Über &Qt"), qApp, SLOT(aboutQt()));	289	menu_Help->addAction(trUtf8("Über &Qt"), qApp, SLOT(aboutQt()));
290	}	290	}
291		291
292	void MKTool::init_Arrays()	292	void MKTool::init_Arrays()
293	{	293	{
294	lb_Analog[0] = lb_A_0;	294	lb_Analog[0] = lb_A_0;
295	lb_Analog[1] = lb_A_1;	295	lb_Analog[1] = lb_A_1;
296	lb_Analog[2] = lb_A_2;	296	lb_Analog[2] = lb_A_2;
297	lb_Analog[3] = lb_A_3;	297	lb_Analog[3] = lb_A_3;
298	lb_Analog[4] = lb_A_4;	298	lb_Analog[4] = lb_A_4;
299	lb_Analog[5] = lb_A_5;	299	lb_Analog[5] = lb_A_5;
300	lb_Analog[6] = lb_A_6;	300	lb_Analog[6] = lb_A_6;
301	lb_Analog[7] = lb_A_7;	301	lb_Analog[7] = lb_A_7;
302	lb_Analog[8] = lb_A_8;	302	lb_Analog[8] = lb_A_8;
303	lb_Analog[9] = lb_A_9;	303	lb_Analog[9] = lb_A_9;
304	lb_Analog[10] = lb_A_10;	304	lb_Analog[10] = lb_A_10;
305	lb_Analog[11] = lb_A_11;	305	lb_Analog[11] = lb_A_11;
306	lb_Analog[12] = lb_A_12;	306	lb_Analog[12] = lb_A_12;
307	lb_Analog[13] = lb_A_13;	307	lb_Analog[13] = lb_A_13;
308	lb_Analog[14] = lb_A_14;	308	lb_Analog[14] = lb_A_14;
309	lb_Analog[15] = lb_A_15;	309	lb_Analog[15] = lb_A_15;
310	lb_Analog[16] = lb_A_16;	310	lb_Analog[16] = lb_A_16;
311	lb_Analog[17] = lb_A_17;	311	lb_Analog[17] = lb_A_17;
312	lb_Analog[18] = lb_A_18;	312	lb_Analog[18] = lb_A_18;
313	lb_Analog[19] = lb_A_19;	313	lb_Analog[19] = lb_A_19;
314	lb_Analog[20] = lb_A_20;	314	lb_Analog[20] = lb_A_20;
315	lb_Analog[21] = lb_A_21;	315	lb_Analog[21] = lb_A_21;
316	lb_Analog[22] = lb_A_22;	316	lb_Analog[22] = lb_A_22;
317	lb_Analog[23] = lb_A_23;	317	lb_Analog[23] = lb_A_23;
318	lb_Analog[24] = lb_A_24;	318	lb_Analog[24] = lb_A_24;
319	lb_Analog[25] = lb_A_25;	319	lb_Analog[25] = lb_A_25;
320	lb_Analog[26] = lb_A_26;	320	lb_Analog[26] = lb_A_26;
321	lb_Analog[27] = lb_A_27;	321	lb_Analog[27] = lb_A_27;
322	lb_Analog[28] = lb_A_28;	322	lb_Analog[28] = lb_A_28;
323	lb_Analog[29] = lb_A_29;	323	lb_Analog[29] = lb_A_29;
324	lb_Analog[30] = lb_A_30;	324	lb_Analog[30] = lb_A_30;
325	lb_Analog[31] = lb_A_31;	325	lb_Analog[31] = lb_A_31;
326	}	326	}
327		327
328	void MKTool::init_Plot()	328	void MKTool::init_Plot()
329	{	329	{
330	NextPlot = 0;	330	NextPlot = 0;
331		331
332	qwtPlot->setCanvasBackground(QColor(QRgb(0x00000000)));	332	qwtPlot->setCanvasBackground(QColor(QRgb(0x00000000)));
333		333
334	qwtPlot->insertLegend(new QwtLegend(), QwtPlot::RightLegend);	334	qwtPlot->insertLegend(new QwtLegend(), QwtPlot::RightLegend);
335		335
336	QwtPlotGrid *Grid = new QwtPlotGrid();	336	QwtPlotGrid *Grid = new QwtPlotGrid();
337	Grid->setMajPen(QPen(Qt::gray, 0, Qt::DotLine));	337	Grid->setMajPen(QPen(Qt::gray, 0, Qt::DotLine));
338		338
339	Grid->attach(qwtPlot);	339	Grid->attach(qwtPlot);
340		340
341	qwtPlot->setAxisScale(QwtPlot::xBottom,0,Settings->Data.Plotter_Count,0);	341	qwtPlot->setAxisScale(QwtPlot::xBottom,0,Settings->Data.Plotter_Count,0);
342		342
343	for (int a = 0; a < MaxAnalog; a++)	343	for (int a = 0; a < MaxAnalog; a++)
344	{	344	{
345	Plot[a] = new QwtPlotCurve(Settings->Analog1.Label[a]);	345	Plot[a] = new QwtPlotCurve(Settings->Analog1.Label[a]);
346	Plot[a]->setPen(QPen(QColor(Def_Colors[a])));	346	Plot[a]->setPen(QPen(QColor(Def_Colors[a])));
347	Plot[a]->setRenderHint(QwtPlotItem::RenderAntialiased);	347	Plot[a]->setRenderHint(QwtPlotItem::RenderAntialiased);
348		348
349	if (Settings->Analog1.PlotView[a])	349	if (Settings->Analog1.PlotView[a])
350	Plot[a]->attach(qwtPlot);	350	Plot[a]->attach(qwtPlot);
351	}	351	}
352	qwtPlot->replot();	352	qwtPlot->replot();
353	}	353	}
354		354
355		355
356	void MKTool::slot_Test()	356	void MKTool::slot_Test()
357	{	357	{
358	/*	358	/*
359	sRxData RX;	359	sRxData RX;
360		360
361	RX.String = IN->text();	361	RX.String = IN->text();
362	RX.Input = IN->text().toLatin1().data();	362	RX.Input = IN->text().toLatin1().data();
363		363
364	new_RXData(RX);	364	new_RXData(RX);
365	*/	365	*/
366	}	366	}
367		367
368	void MKTool::slot_ac_Hardware()	368	void MKTool::slot_ac_Hardware()
369	{	369	{
370	QAction Action = (QAction)sender();	370	QAction Action = (QAction)sender();
371		371
372	if (Action->isChecked() == false)	372	if (Action->isChecked() == false)
373	{	373	{
374	Action->setChecked(true);	374	Action->setChecked(true);
375	}	375	}
376		376
377	slot_rb_Hardware();	377	slot_rb_Hardware();
378	}	378	}
379		379
380	void MKTool::slot_rb_Hardware()	380	void MKTool::slot_rb_Hardware()
381	{	381	{
382	if ((rb_SelNC->isChecked() == false) && (Mode.ID != ADDRESS_NC))	382	if ((rb_SelNC->isChecked() == false) && (Mode.ID != ADDRESS_NC))
383	{	383	{
384	lb_Status->setText(tr("Schalte um auf NaviCtrl."));	384	lb_Status->setText(tr("Schalte um auf NaviCtrl."));
385	TX_Data[0] = 0x1B;	385	TX_Data[0] = 0x1B;
386	TX_Data[1] = 0x1B;	386	TX_Data[1] = 0x1B;
387	TX_Data[2] = 0x55;	387	TX_Data[2] = 0x55;
388	TX_Data[3] = 0xAA;	388	TX_Data[3] = 0xAA;
389	TX_Data[4] = 0x00;	389	TX_Data[4] = 0x00;
390	TX_Data[5] = '\r';	390	TX_Data[5] = '\r';
391	send_Data('#', ADDRESS_NC, TX_Data, 6, false);	391	send_Data('#', ADDRESS_NC, TX_Data, 6, false);
392	ToolBox::Wait(SLEEP);	392	ToolBox::Wait(SLEEP);
393	}	393	}
394		394
395	if (rb_SelFC->isChecked())	395	if (rb_SelFC->isChecked())
396	{	396	{
397	lb_Status->setText(tr("Schalte um auf FlightCtrl."));	397	lb_Status->setText(tr("Schalte um auf FlightCtrl."));
398	TX_Data[0] = 0;	398	TX_Data[0] = 0;
399	send_Data('u', ADDRESS_NC, TX_Data, 1, false);	399	send_Data('u', ADDRESS_NC, TX_Data, 1, false);
400	}	400	}
401	else	401	else
402	if (rb_SelMag->isChecked())	402	if (rb_SelMag->isChecked())
403	{	403	{
404	lb_Status->setText(tr("Schalte um auf MK3MAG."));	404	lb_Status->setText(tr("Schalte um auf MK3MAG."));
405	TX_Data[0] = 1;	405	TX_Data[0] = 1;
406	send_Data('u', ADDRESS_NC, TX_Data, 1, false);	406	send_Data('u', ADDRESS_NC, TX_Data, 1, false);
407	}	407	}
408	else	408	else
409	if (rb_SelNC->isChecked())	409	if (rb_SelNC->isChecked())
410	{	410	{
411	lb_Status->setText(tr("Schalte um auf NaviCtrl."));	411	lb_Status->setText(tr("Schalte um auf NaviCtrl."));
412	TX_Data[0] = 0x1B;	412	TX_Data[0] = 0x1B;
413	TX_Data[1] = 0x1B;	413	TX_Data[1] = 0x1B;
414	TX_Data[2] = 0x55;	414	TX_Data[2] = 0x55;
415	TX_Data[3] = 0xAA;	415	TX_Data[3] = 0xAA;
416	TX_Data[4] = 0x00;	416	TX_Data[4] = 0x00;
417	TX_Data[5] = '\r';	417	TX_Data[5] = '\r';
418	send_Data('#', ADDRESS_NC, TX_Data, 6, false);	418	send_Data('#', ADDRESS_NC, TX_Data, 6, false);
419	}	419	}
420	ToolBox::Wait(SLEEP);	420	ToolBox::Wait(SLEEP);
421		421
422	// qDebug("Select RB Hardware");	422	// qDebug("Select RB Hardware");
423	send_Data('v', ADDRESS_ALL, TX_Data, 0, true);	423	send_Data('v', ADDRESS_ALL, TX_Data, 0, true);
424	}	424	}
425		425
426	// Ticker-Event	426	// Ticker-Event
427	///////////////	427	///////////////
428	void MKTool::slot_Ticker()	428	void MKTool::slot_Ticker()
429	{	429	{
430	if (TickerDiv)	430	if (TickerDiv)
431	TickerDiv = false;	431	TickerDiv = false;
432	else	432	else
433	TickerDiv = true;	433	TickerDiv = true;
434		434
435	for (int a = 0; a < MaxTickerEvents; a++)	435	for (int a = 0; a < MaxTickerEvents; a++)
436	{	436	{
437	if (TickerEvent[a] == true)	437	if (TickerEvent[a] == true)
438	{	438	{
439	switch(a)	439	switch(a)
440	{	440	{
441	case 0 :	441	case 0 :
442	if (TickerDiv)	442	if (TickerDiv)
443	{	443	{
444	QByteArray Temp(LastSend.toUtf8());	444	QByteArray Temp(LastSend.toUtf8());
445	serialPort->sendData(Temp);	445	serialPort->sendData(Temp);
446	}	446	}
447	break;	447	break;
448	case 1 :	448	case 1 :
449	TX_Data[0] = 0;	449	TX_Data[0] = 0;
450	send_Data('p', ADDRESS_FC, TX_Data, 0, false);	450	send_Data('p', ADDRESS_FC, TX_Data, 0, false);
451	break;	451	break;
452	case 2 :	452	case 2 :
453	if (f_LCD->cb_LCD->isChecked())	453	if (f_LCD->cb_LCD->isChecked())
454	{	454	{
455	if (!f_LCD->isVisible())	455	if (!f_LCD->isVisible())
456	{	456	{
457	Ticker->setInterval(2000);	457	Ticker->setInterval(2000);
458	TickerEvent[2] = false;	458	TickerEvent[2] = false;
459	}	459	}
460	TX_Data[0] = LCD_Page;	460	TX_Data[0] = LCD_Page;
461	TX_Data[1] = 0;	461	TX_Data[1] = 0;
462	send_Data('l', ADDRESS_ALL, TX_Data, 1, true);	462	send_Data('l', ADDRESS_ALL, TX_Data, 1, true);
463	}	463	}
464	break;	464	break;
465	case 3 :	465	case 3 :
466	if (ac_FastDebug->isChecked())	466	if (ac_FastDebug->isChecked())
467	{	467	{
468	TX_Data[0] = Settings->Data.Debug_Fast / 10;	468	TX_Data[0] = Settings->Data.Debug_Fast / 10;
469	send_Data('d', ADDRESS_ALL, TX_Data, 1, false);	469	send_Data('d', ADDRESS_ALL, TX_Data, 1, false);
470	}	470	}
471	else	471	else
472	{	472	{
473	TX_Data[0] = Settings->Data.Debug_Slow / 10;	473	TX_Data[0] = Settings->Data.Debug_Slow / 10;
474	send_Data('d', ADDRESS_ALL, TX_Data, 1, false);	474	send_Data('d', ADDRESS_ALL, TX_Data, 1, false);
475	}	475	}
476	break;	476	break;
477	}	477	}
478	}	478	}
479	}	479	}
480	}	480	}
481		481
482	void MKTool::slot_QMKS_Connect()	482	void MKTool::slot_QMKS_Connect()
483	{	483	{
484	if (ac_QMKServer->isChecked())	484	if (ac_QMKServer->isChecked())
485	{	485	{
486	lb_Status->setText(tr("Verbinde zum QMK-Datenserver."));	486	lb_Status->setText(tr("Verbinde zum QMK-Datenserver."));
487		487
488	MyServer->Connect("nimari.de", 16441, Settings->Server.QMKS_Login, Settings->Server.QMKS_Password);	488	MyServer->Connect("nimari.de", 16441, Settings->Server.QMKS_Login, Settings->Server.QMKS_Password);
489	connect(MyServer, SIGNAL(sig_Connected()), this, SLOT(slot_QMKS_Connected()));	489	connect(MyServer, SIGNAL(sig_Connected()), this, SLOT(slot_QMKS_Connected()));
490	connect(MyServer, SIGNAL(sig_Disconnected(int)), this, SLOT(slot_QMKS_Disconnected(int)));	490	connect(MyServer, SIGNAL(sig_Disconnected(int)), this, SLOT(slot_QMKS_Disconnected(int)));
491		491
492	}	492	}
493	else	493	else
494	{	494	{
495	if ((MyServer->property("Connect")) == true)	495	if ((MyServer->property("Connect")) == true)
496	{	496	{
497	disconnect(MyServer, SIGNAL(sig_Disconnected(int)), 0, 0);	497	disconnect(MyServer, SIGNAL(sig_Disconnected(int)), 0, 0);
498	lb_Status->setText(tr("Trenne vom QMK-Datenserver."));	498	lb_Status->setText(tr("Trenne vom QMK-Datenserver."));
499		499
500	MyServer->Disconnect();	500	MyServer->Disconnect();

Subversion Repositories Projects

(root)/QMK-Groundstation/trunk/Forms/mktool.cpp - Rev 241 → 246