WebSVN - FlightCtrl - Diff - Rev 2537 and 2540


// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Software Nutzungsbedingungen (english version: see below)
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + der Fa. HiSystems GmbH, Flachsmeerstrasse 2, 26802 Moormerland - nachfolgend Lizenzgeber genannt -
// + Der Lizenzgeber räumt dem Kunden ein nicht-ausschließliches, zeitlich und räumlich* unbeschränktes Recht ein, die im den
// + Mikrocontroller verwendete Firmware für die Hardware Flight-Ctrl, Navi-Ctrl, BL-Ctrl, MK3Mag & PC-Programm MikroKopter-Tool 
// + - nachfolgend Software genannt - nur für private Zwecke zu nutzen.
// + Der Einsatz dieser Software ist nur auf oder mit Produkten des Lizenzgebers zulässig.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die vom Lizenzgeber gelieferte Software ist urheberrechtlich geschützt. Alle Rechte an der Software sowie an sonstigen im
// + Rahmen der Vertragsanbahnung und Vertragsdurchführung überlassenen Unterlagen stehen im Verhältnis der Vertragspartner ausschließlich dem Lizenzgeber zu.
// + Die in der Software enthaltenen Copyright-Vermerke, Markenzeichen, andere Rechtsvorbehalte, Seriennummern sowie
// + sonstige der Programmidentifikation dienenden Merkmale dürfen vom Kunden nicht verändert oder unkenntlich gemacht werden.
// + Der Kunde trifft angemessene Vorkehrungen für den sicheren Einsatz der Software. Er wird die Software gründlich auf deren
// + Verwendbarkeit zu dem von ihm beabsichtigten Zweck testen, bevor er diese operativ einsetzt.
// + Die Haftung des Lizenzgebers wird - soweit gesetzlich zulässig - begrenzt in Höhe des typischen und vorhersehbaren
// + Schadens. Die gesetzliche Haftung bei Personenschäden und nach dem Produkthaftungsgesetz bleibt unberührt. Dem Lizenzgeber steht jedoch der Einwand 
// + des Mitverschuldens offen.
// + Der Kunde trifft angemessene Vorkehrungen für den Fall, dass die Software ganz oder teilweise nicht ordnungsgemäß arbeitet.
// + Er wird die Software gründlich auf deren Verwendbarkeit zu dem von ihm beabsichtigten Zweck testen, bevor er diese operativ einsetzt.
// + Der Kunde wird er seine Daten vor Einsatz der Software nach dem Stand der Technik sichern.
// + Der Kunde ist darüber unterrichtet, dass der Lizenzgeber seine Daten im zur Vertragsdurchführung erforderlichen Umfang
// + und auf Grundlage der Datenschutzvorschriften erhebt, speichert, verarbeitet und, sofern notwendig, an Dritte übermittelt.
// + *) Die räumliche Nutzung bezieht sich nur auf den Einsatzort, nicht auf die Reichweite der programmierten Software.
// + #### ENDE DER NUTZUNGSBEDINGUNGEN ####'
// +  Hinweis: Informationen über erweiterte Nutzungsrechte (wie z.B. Nutzung für nicht-private Zwecke) sind auf Anfrage per Email an info(@)hisystems.de verfügbar.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Software LICENSING TERMS
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + of HiSystems GmbH, Flachsmeerstrasse 2, 26802 Moormerland, Germany - the Licensor -
// + The Licensor grants the customer a non-exclusive license to use the microcontroller firmware of the Flight-Ctrl, Navi-Ctrl, BL-Ctrl, and MK3Mag hardware 
// + (the Software) exclusively for private purposes. The License is unrestricted with respect to time and territory*.
// + The Software may only be used with the Licensor's products.
// + The Software provided by the Licensor is protected by copyright. With respect to the relationship between the parties to this
// + agreement, all rights pertaining to the Software and other documents provided during the preparation and execution of this
// + agreement shall be the property of the Licensor.
// + The information contained in the Software copyright notices, trademarks, other legal reservations, serial numbers and other
// + features that can be used to identify the program may not be altered or defaced by the customer.
// + The customer shall be responsible for taking reasonable precautions
// + for the safe use of the Software. The customer shall test the Software thoroughly regarding its suitability for the
// + intended purpose before implementing it for actual operation. The Licensor's liability shall be limited to the extent of typical and
// + foreseeable damage to the extent permitted by law, notwithstanding statutory liability for bodily injury and product
// + liability. However, the Licensor shall be entitled to the defense of contributory negligence.
// + The customer will take adequate precautions in the case, that the software is not working properly. The customer will test
// + the software for his purpose before any operational usage. The customer will backup his data before using the software.
// + The customer understands that the Licensor collects, stores and processes, and, where required, forwards, customer data
// + to third parties to the extent necessary for executing the agreement, subject to applicable data protection and privacy regulations.
// + *) The territory aspect only refers to the place where the Software is used, not its programmed range.
// + #### END OF LICENSING TERMS ####
// + Note: For information on license extensions (e.g. commercial use), please contact us at info(@)hisystems.de.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#include "jetimenu.h"
#include "libfc.h"
#include "printf_P.h"
#include "main.h"
#include "spi.h"
#include "capacity.h"
#include "hottmenu.h"
 
#define JETIBOX_KEY_RIGHT       0x1F
#define JETIBOX_KEY_UP          0x2F
#define JETIBOX_KEY_DOWN        0x4F
#define JETIBOX_KEY_LEFT        0x8F
#define JETIBOX_KEY_NONE        0x0F
#define JETIBOX_KEY_UNDEF       0x00
 
#define JetiBox_printfxy(x,y,format, args...)  { LIBFC_JetiBox_SetPos(y * 16 + x); _printf_P(&LIBFC_JetiBox_Putchar, PSTR(format) , ## args);}
#define JetiBox_printf(format, args...)        {  _printf_P(&LIBFC_JetiBox_Putchar, PSTR(format) , ## args);}
 
unsigned char JumpToMenu = 0xff;
 
// -----------------------------------------------------------
// the menu functions
// -----------------------------------------------------------
void Menu_Status(uint8_t key)
{                                               //0123456789ABCDEF
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
        JetiBox_printfxy(0,0,"%2i.%1iV",UBat/10, UBat%10);
        if(NaviDataOkay)
        {
                JetiBox_printfxy(6,0,"%3d%c %3dm%c",CompassCorrected, 0xDF, GPSInfo.HomeDistance/10,NC_GPS_ModeCharacter);
        }
        else
        {
                JetiBox_printfxy(6,0,"Status    ");
        }
 
#if (defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__))
        if(NC_ErrorCode)
        {
         static unsigned int timer;
         static char toggle = 1;
     
         if(CheckDelay(timer)) { if(toggle) toggle = 0; else toggle = 1; timer = SetDelay(1500);};
     if(toggle)
          {
       LIBFC_JetiBox_SetPos(0);
           _printf_P(&LIBFC_JetiBox_Putchar, NC_ERROR_TEXT[NC_ErrorCode] , 0);
          }
          else
          {
           JetiBox_printfxy(6,0,"ERROR: %2d ",NC_ErrorCode);
//         if(MotorenEin) JetiBeep = 'O'; 
          }
        }
        else
         if(NC_To_FC_Flags & NC_TO_FC_SIMULATION_ACTIVE)
         {
           JetiBox_printfxy(6,0,"SIMULATION");
         }
        else
        if(ShowSettingNameTime)
        {
         LIBFC_JetiBox_Clear();
         JetiBox_printfxy(0,0,"Set%d:%s",ActiveParamSet,EE_Parameter.Name);
         if(FC_StatusFlags3 & FC_STATUS3_BOAT) JetiBox_printfxy(0,1,"(Boat-Mode)");
         return; // nichts weiter ausgeben
        }
 
#else
        if(NC_ErrorCode) { JetiBox_printfxy(6,0,"ERROR: %2d ",NC_ErrorCode); if(MotorenEin) JetiBeep = 'S';};
#endif
        JetiBox_printfxy(0,1,"%4i %2i:%02i",Capacity.UsedCapacity,FlugSekunden/60,FlugSekunden%60);
        if(Parameter_GlobalConfig & CFG_HOEHENREGELUNG)
        {
                JetiBox_printfxy(10,1,"%4im%c", (int16_t)(HoehenWert/100),VarioCharacter);
        }
        if(FC_StatusFlags3 & FC_STATUS3_REDUNDANCE_AKTIVE) JetiBox_printfxy(10,1,"R");
 
#endif
}
 
 
void Menu_Temperature(uint8_t key)
{                       //0123456789ABCDEF
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
  JetiBox_printfxy(0,0,"%3i %3i %3i %3i", Motor[0].Temperature, Motor[1].Temperature, Motor[2].Temperature, Motor[3].Temperature);
  JetiBox_printfxy(0,1,"%3i %3i %3i %3i", Motor[4].Temperature, Motor[5].Temperature, Motor[6].Temperature, Motor[7].Temperature);
  if(RequiredMotors <= 4)
        {
         JetiBox_printfxy(0,1,"Temperatures    ");
    }
        else
    if(RequiredMotors <= 6)
        {
         JetiBox_printfxy(8,1,"\%cC     ",0xdf);
        }
 
#endif
}
 
void Menu_Battery(uint8_t key)
{                       //0123456789ABCDEF
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
        JetiBox_printfxy(0,0,"%2i.%1iV %3i.%1iA", UBat/10, UBat%10, Capacity.ActualCurrent/10, Capacity.ActualCurrent%10);
        JetiBox_printfxy(0,1,"%4iW %6imAh",Capacity.ActualPower, Capacity.UsedCapacity);
#endif
}
 
void Magnet_Values(uint8_t key)
{                       //0123456789ABCDEF
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
        JetiBox_printfxy(0,0,"Magnet:%3i%% %3i%c",EarthMagneticField, KompassValue,0xDF);
        JetiBox_printfxy(0,1,"Incli.:%3i%c (%i) ",EarthMagneticInclination, 0xDF,EarthMagneticInclinationTheoretic);
#endif
}
 
 
void Menu_WPL_A1(uint8_t key)
{                       //0123456789ABCDEF
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
        JetiBox_printfxy(0,0,"Load Waypoints");
        JetiBox_printfxy(0,1,"(Fixed)      ");
#endif
}
 
void Menu_WPL_R1(uint8_t key)
{                       //0123456789ABCDEF
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
        JetiBox_printfxy(0,0,"Load Waypoints");
        JetiBox_printfxy(0,1,"(Relative)   ");
#endif
}
 
#if (defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__))
void Menu_POINT_LD(uint8_t key)
{                       //0123456789ABCDEF
        JetiBox_printfxy(0,0,"Load singl.Point");
//      JetiBox_printfxy(0,1,"(Fixed)      ");
}
#endif
 
#if (defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__))
void Menu_POINT_SV(uint8_t key)
{                       //0123456789ABCDEF
        JetiBox_printfxy(0,0,"Save singl.Point");
//      JetiBox_printfxy(0,1,"(Relative)   ");
}
 
void Menu_AccCal_Ask(uint8_t key)
{                       //0123456789ABCDEF
        JetiBox_printfxy(0,0,"ACC calibration");
//      JetiBox_printfxy(0,1,"(Relative)   ");
}
 
void Menu_AccCal(uint8_t key)
{
 static unsigned char changed = 0;
                                                //0123456789ABCDEF
        JetiBox_printfxy(0,0,"ACC calibration");
 
        if((FC_StatusFlags & FC_STATUS_MOTOR_RUN) && ((NC_GPS_ModeCharacter == ' ') || (NC_GPS_ModeCharacter == '/') || (NC_GPS_ModeCharacter == '-')))
         {
          if(!EE_Parameter.Driftkomp) EE_Parameter.Driftkomp = 6; // enables the Gyro-Drift compensation to make sure that a litlte calibration error won't effect the attitude                                   
          JetiBox_printfxy(0,0,"ACC  N=%3i R=%3i",NeutralAccX,NeutralAccY);
          if(ChannelNick || ChannelRoll)
                                        JetiBox_printfxy(0,1,"Stick! (%i/%i)",ChannelNick,ChannelRoll)
          else                             //0123456789ABCDEF
          if(changed)   JetiBox_printfxy(0,1,"land to save    ")
          else                  JetiBox_printfxy(0,1,"use keys now    ")
       
          if(key== JETIBOX_KEY_UP   )  {NeutralAccX++;JetiBeep=130; changed = 1;}
          if(key== JETIBOX_KEY_DOWN )  {NeutralAccX--;JetiBeep=130; changed = 1;}
          if(key== JETIBOX_KEY_RIGHT ) {NeutralAccY++;JetiBeep=130; changed = 1;}
          if(key== JETIBOX_KEY_LEFT)   {NeutralAccY--;JetiBeep=130; changed = 1;}
    }
         else
         {
          if(!(FC_StatusFlags & FC_STATUS_MOTOR_RUN))    // motors are off 
                 {
             if(key == JETIBOX_KEY_LEFT) { JumpToMenu = 0; changed = 0; }// Exit
 
                 if(changed == 0) JetiBox_printfxy(0,1,"Fly with GPS off")
                 else
                 if(changed == 1)
                   {
                          JetiBox_printfxy(0,1,"       save -->")
                    if(key== JETIBOX_KEY_RIGHT)
                         {
                          StoreNeutralToEeprom();
                          JetiBeep = 130;
                          changed = 2;
                         }
                  }
                 else
                 if(changed == 2)
                   {
                          JetiBox_printfxy(0,1," values stored  ");
           }
           }                        //0123456789ABCDEF
           else JetiBox_printfxy(0,1,"switch GPS off  ")
         }  
//      JetiBox_printfxy(0,1,"(Relative)   ");
}
#endif
 
#if (defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__))
void Menu_POINT_SV2(uint8_t key)
{                       //0123456789ABCDEF
static unsigned char load_waypoint_tmp = 1, changed;
 
//  if(WPL_Name[0] == 0) JetiBox_printfxy(0,0,"Relative WPs ")
//  else JetiBox_printfxy(0,0,"Rel:%s",WPL_Name);
  JetiBox_printfxy(0,0,"Save Point:");
 
  if(NaviData_MaxWpListIndex == 0) JetiBox_printfxy(0,1,"no SD-Card")
  else
  if(GPSInfo.SatFix != SATFIX_3D) JetiBox_printfxy(0,1,"no GPS-Fix")
  else
  {
        JetiBox_printfxy(11,0,"%2d",load_waypoint_tmp);
 
//      if(NaviData_WaypointNumber)     JetiBox_printfxy(8,1,"%2d/%d ",NaviData_WaypointIndex,NaviData_WaypointNumber)
//      else JetiBox_printfxy(8,1,"--/--")
        JetiBox_printfxy(0,1,"Dir:%3d Alt:%3dm",CompassCorrected,(int16_t)(HoehenWert/100))
 
    if(changed)         JetiBox_printfxy(14,0,"->")
        else            JetiBox_printfxy(14,0,"  ");
 
        if(key == JETIBOX_KEY_UP && load_waypoint_tmp < NaviData_MaxWpListIndex) { load_waypoint_tmp++; changed = 1;}
        if(key == JETIBOX_KEY_DOWN && load_waypoint_tmp > 1) { load_waypoint_tmp--; changed = 1; }
 
        if(key == JETIBOX_KEY_RIGHT && load_waypoint_tmp)
        {
         ToNC_Store_SingePoint = load_waypoint_tmp;
         changed = 0;
        }
  }
}
#endif
 
#if (defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__))
void Menu_POINT_LD2(uint8_t key)
{                       //0123456789ABCDEF
static unsigned char load_waypoint_tmp = 1, changed;
 
//  if(WPL_Name[0] == 0) JetiBox_printfxy(0,0,"FIX Waypoints")
//  else JetiBox_printfxy(0,0,"FIX:%s",WPL_Name);
  JetiBox_printfxy(0,0,"Load Point")
 
  if(NaviData_MaxWpListIndex == 0) JetiBox_printfxy(0,1,"no SD-Card")
  else
  {
        JetiBox_printfxy(11,0,"%2d",load_waypoint_tmp);
 
        if(NaviData_WaypointNumber)     JetiBox_printfxy(0,1,"Dist:%3d Alt:%3d ",NaviData_TargetDistance,(int16_t)(FromNC_AltitudeSetpoint/100))
        else JetiBox_printfxy(8,1,"                ");
       
    if(changed)         JetiBox_printfxy(14,0,"->")
        else            JetiBox_printfxy(14,0,"  ");
 
        if(key == JETIBOX_KEY_UP && load_waypoint_tmp < NaviData_MaxWpListIndex) { load_waypoint_tmp++; changed = 1;}
        if(key == JETIBOX_KEY_DOWN && load_waypoint_tmp > 1) { load_waypoint_tmp--; changed = 1; }
 
        if(key == JETIBOX_KEY_RIGHT && load_waypoint_tmp)
        {
         ToNC_Load_SingePoint = load_waypoint_tmp;
         changed = 0;
        }
  }
}
#endif
 
 
void Menu_WPL_A2(uint8_t key)
{                       //0123456789ABCDEF
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
static unsigned char load_waypoint_tmp = 1, changed;
 
  if(WPL_Name[0] == 0) JetiBox_printfxy(0,0,"FIX Waypoints")
  else JetiBox_printfxy(0,0,"FIX:%s",WPL_Name);
 
  if(NaviData_MaxWpListIndex == 0) JetiBox_printfxy(0,1,"no SD-Card")
  else
  {
        JetiBox_printfxy(0,1,"#%2d WP:",load_waypoint_tmp);
        if(NaviData_WaypointNumber)     JetiBox_printfxy(8,1,"%2d/%d ",NaviData_WaypointIndex,NaviData_WaypointNumber)
        else JetiBox_printfxy(8,1,"--/--")
       
    if(changed)         JetiBox_printfxy(14,1,"->")
        else            JetiBox_printfxy(14,1,"  ");
 
        if(key == JETIBOX_KEY_UP && load_waypoint_tmp < NaviData_MaxWpListIndex) { load_waypoint_tmp++; changed = 1;}
        if(key == JETIBOX_KEY_DOWN && load_waypoint_tmp > 1) { load_waypoint_tmp--; changed = 1; }
 
        if(key == JETIBOX_KEY_RIGHT && load_waypoint_tmp)
        {
         ToNC_Load_WP_List = load_waypoint_tmp;
         changed = 0;
        }
  }
#endif
}
 
void Menu_WPL_R2(uint8_t key)
{                       //0123456789ABCDEF
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
static unsigned char load_waypoint_tmp = 1, changed;
 
  if(WPL_Name[0] == 0) JetiBox_printfxy(0,0,"Relative WPs ")
  else JetiBox_printfxy(0,0,"Rel:%s",WPL_Name);
 
  if(NaviData_MaxWpListIndex == 0) JetiBox_printfxy(0,1,"no SD-Card")
  else
  if(GPSInfo.SatFix != SATFIX_3D) JetiBox_printfxy(0,1,"no GPS-Fix")
  else
  {
        JetiBox_printfxy(0,1,"#%2d WPs:",load_waypoint_tmp);
        if(NaviData_WaypointNumber)     JetiBox_printfxy(8,1,"%2d/%d ",NaviData_WaypointIndex,NaviData_WaypointNumber)
        else JetiBox_printfxy(8,1,"--/--")
 
    if(changed)         JetiBox_printfxy(14,1,"->")
        else            JetiBox_printfxy(14,1,"  ");
 
        if(key == JETIBOX_KEY_UP && load_waypoint_tmp < NaviData_MaxWpListIndex) { load_waypoint_tmp++; changed = 1;}
        if(key == JETIBOX_KEY_DOWN && load_waypoint_tmp > 1) { load_waypoint_tmp--; changed = 1; }
 
        if(key == JETIBOX_KEY_RIGHT && load_waypoint_tmp)
        {
         ToNC_Load_WP_List = load_waypoint_tmp | 0x80;
         changed = 0;
        }
  }
#endif
}
 
 
 
void Menu_PosInfo(uint8_t key)
{
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
        if(NaviDataOkay)
        {
                JetiBox_printfxy(0,0,"%2um/s Sat:%d ",GPSInfo.Speed,GPSInfo.NumOfSats);
                switch (GPSInfo.SatFix)
                {
                        case SATFIX_3D:
                                JetiBox_printfxy(12,0,"  3D");
                                break;
//                      case SATFIX_2D:
//                      case SATFIX_NONE:
                        default:
                                JetiBox_printfxy(12,0,"NoFx");
                                break;
                }
                if(GPSInfo.Flags & FLAG_DIFFSOLN)
                {
                        JetiBox_printfxy(12,0,"DGPS");
                }
                JetiBox_printfxy(0,1,"Home:%3dm %3d%c %c", GPSInfo.HomeDistance/10, GPSInfo.HomeBearing, 0xDF,NC_GPS_ModeCharacter);
        }
        else
        {                     //0123456789ABCDEF
                JetiBox_printfxy(2,0,"No NaviCtrl!");
        }
#endif
}
 
 
// -----------------------------------------------------------
// the menu topology
// -----------------------------------------------------------
typedef void (*pFctMenu) (uint8_t);  // the menu item handler function pointer
 
typedef struct{
  int8_t left;
  int8_t right;
  int8_t up;
  int8_t down;
  pFctMenu pHandler;
} MENU_ENTRY;
 
 
// the menu navigation structure
/*                                              |
3 - 0 - 1 - 2 - 3 - 0
*/
 
const MENU_ENTRY JetiBox_Menu[] PROGMEM=
{ // l  r  u  d  pHandler
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
#if (defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__))
#define ACC_CAL  13
        {8, 1, 0, 0, &Menu_Status },    // 0
        {0, 2, 1, 1, &Menu_Temperature },       // 1
        {1, 3, 2, 2, &Menu_Battery },   // 2
        {2, 4, 3, 3, &Menu_PosInfo },   // 3
        {3, 5, 4, 9, &Menu_WPL_A1 },    // 4
        {4, 6, 5,10, &Menu_WPL_R1 },    // 5
        {5, 7, 6,11, &Menu_POINT_LD},   // 6
        {6, 8, 7,12, &Menu_POINT_SV},   // 7
        {7, 9, 8, 8, &Magnet_Values },  // 8
        {8, 0, 9,14, &Menu_AccCal_Ask},// 9
 
        {4,10,10,10, &Menu_WPL_A2 },    // 10
        {5,11,11,11, &Menu_WPL_R2 },    // 11
        {6,12,12,12, &Menu_POINT_LD2},  // 12
        {7,13,13,13, &Menu_POINT_SV2},  // 13
 
        {14,14,14,14, &Menu_AccCal},    // 14 
#else
        {6, 1, 0, 0, &Menu_Status },    // 0
        {0, 2, 1, 1, &Menu_Temperature },       // 1
        {1, 3, 2, 2, &Menu_Battery },   // 2
        {2, 4, 3, 3, &Menu_PosInfo },   // 3
        {3, 5, 7, 7, &Menu_WPL_A1 },    // 4
        {4, 6, 8, 8, &Menu_WPL_R1 },    // 5
        {5, 0, 6, 6, &Magnet_Values },  // 6
 
        {4, 7, 7, 7, &Menu_WPL_A2 },    // 7
        {5, 8, 8, 8, &Menu_WPL_R2 },    // 8
#endif
       
#endif
};
 
// -----------------------------------------------------------
// Update display buffer
// -----------------------------------------------------------
unsigned char JetiBox_Update(unsigned char key)
{
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP)
        static uint8_t item = 0, last_item = 0; // the menu item
        static uint8_t updateDelay = 1 , last_key;
        // navigate within the menu by key action
        last_item = item;
        switch(key)
        {
                case JETIBOX_KEY_LEFT:
                        //if (item == 0) return (1);                                                                    // switch back to jeti expander menu
                        // else 
                         item = pgm_read_byte(&JetiBox_Menu[item].left);                //trigger to left menu item
                        break;
                case JETIBOX_KEY_RIGHT:
                        item = pgm_read_byte(&JetiBox_Menu[item].right);        //trigger to right menu item
                        break;
                case JETIBOX_KEY_UP:
                        item = pgm_read_byte(&JetiBox_Menu[item].up);           //trigger to up menu item
                        break;
                case JETIBOX_KEY_DOWN:
                        item = pgm_read_byte(&JetiBox_Menu[item].down);         //trigger to down menu item
                        break;
                default:
                        break;
        }
        if(JumpToMenu != 0xff) { item = JumpToMenu; JumpToMenu = 0xff;};
        // if the menu item has been changed, do not pass the key to the item handler
        // to avoid jumping over to items
        if(item != last_item) key = JETIBOX_KEY_UNDEF;
 
//      if((updateDelay++ & 0x01) || (key != last_key))
        if((updateDelay++ & 0x01) || (key != JETIBOX_KEY_NONE))
        {      
                last_key = key;
                LIBFC_JetiBox_Clear();
                //execute menu item handler
                ((pFctMenu)(pgm_read_word(&(JetiBox_Menu[item].pHandler))))(key);
        }      
#endif
        return (0);
}
 
 
Subversion Repositories FlightCtrl

(root)/tags/V2.10c/jetimenu.c @ 2700 - Rev 2537 → 2540
