WebSVN - NaviCtrl - Diff - Rev 357 and 380


/*#######################################################################################*/
/* !!! THIS IS NOT FREE SOFTWARE !!!                                                     */
/*#######################################################################################*/
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Copyright (c) 2008 Ingo Busker, Holger Buss
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + FOR NON COMMERCIAL USE ONLY
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist.
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt
// + bzgl. der Nutzungsbedingungen aufzunehmen.
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen,
// + Verkauf von Luftbildaufnahmen, usw.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"
// + eindeutig als Ursprung verlinkt werden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion
// + Benutzung auf eigene Gefahr
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zulässig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Redistributions of source code (with or without modifications) must retain the above copyright notice,
// + this list of conditions and the following disclaimer.
// +   * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived
// +     from this software without specific prior written permission.
// +   * The use of this project (hardware, software, binary files, sources and documentation) is only permitted
// +     for non-commercial use (directly or indirectly)
// +     Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted
// +     with our written permission
// +   * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
// +     clearly linked as origin
// +   * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed
//
// +  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// +  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// +  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// +  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
// +  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// +  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// +  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// +  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// +  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// +  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// +  POSSIBILITY OF SUCH DAMAGE.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#include <stdlib.h>
#include "91x_lib.h"
#include "main.h"
#include "led.h"
#include "ubx.h"
#include "GPS.h"
#include "timer1.h"
#include "compass.h"
#include "spi_slave.h"
#include "menu.h"
#include "uart1.h"
#include "ncmag.h"
#include "logging.h"
 
u8 DispPtr = 0;
s8 DisplayBuff[DISPLAYBUFFSIZE];
 
 
u8 MenuItem = 0;
u8 MaxMenuItem = 18;
 
void Menu_Putchar(char c)
{
   if(DispPtr < DISPLAYBUFFSIZE) DisplayBuff[DispPtr++] = c; ;
}
 
void Menu_Clear(void)
{
        u8 i;
        for( i = 0; i < DISPLAYBUFFSIZE; i++) DisplayBuff[i] = ' ';
}
 
 
// Display with 20 characters in 4 lines
void Menu_Update(u8 Keys)
{
        s32 i1,i2;
        u8 sign;
 
        if(Keys & KEY1) { if(MenuItem > 0) MenuItem--; else MenuItem = MaxMenuItem;}
        if(Keys & KEY2) { if(MenuItem == MaxMenuItem) MenuItem = 0; else MenuItem++;}
        if((Keys & KEY1) && (Keys & KEY2)) MenuItem = 0;
        if(MenuItem > MaxMenuItem) MenuItem = MaxMenuItem;
        Menu_Clear();
        // print menu item number in the upper right corner
        if(MenuItem < 10)
        {
                LCD_printfxy(17,0,"[%i]",MenuItem);
        }
        else // Menuitem >= 10
        {
                LCD_printfxy(16,0,"[%i]",MenuItem);
        }
 
        switch(MenuItem)
        {
                // Version Info
                case 0:
                        LCD_printfxy(0,0,"++  Navi-Ctrl  ++");
                        LCD_printfxy(0,1,"HW V%d.%d SW V%d.%d%c", Version_HW/10, Version_HW%10, VERSION_MAJOR, VERSION_MINOR, 'a'+ VERSION_PATCH);
 
            if(ErrorCode)
                        {
                                LCD_printfxy(0,2,"Error: %d",ErrorCode);
                LCD_printfxy(0,3,"%s",ErrorMSG);
                        }
                        else
                        {                                  
                         LCD_printfxy(0,3,"(c) HiSystems GmbH");
                         LCD_printfxy(0,2,"%s",ErrorMSG);
                        }
                        break;
                case 1:
                        if (GPSData.Status == INVALID)
                        {
                                LCD_printfxy(0,0,"No GPS data");
                                LCD_printfxy(0,1,"Lon:                ");
                                LCD_printfxy(0,2,"Lat:                ");
                                LCD_printfxy(0,3,"Alt:                ");
                        }
                        else // newdata or processed
                        {
                                LCD_printfxy(0,0,"Sat:%02d ", GPSData.NumOfSats);
                                switch (GPSData.SatFix)
                                {
                                case SATFIX_NONE:
                                        LCD_printfxy(7,0,"NoFix");
                                        break;
                                case SATFIX_2D:
                                        LCD_printfxy(7,0,"2DFix");
                                        break;
                                case SATFIX_3D:
                                        LCD_printfxy(7,0,"3DFix");
                                        break;
                                default:
                                        LCD_printfxy(7,0,"??Fix");
                                        break;
                                }
                                if(GPSData.Flags & FLAG_DIFFSOLN)
                                {
                                        LCD_printfxy(12,0,"/DGPS");
                                }
                                else
                                {
                                        LCD_printfxy(12,0,"     ");
                                }
 
                                if(GPSData.Position.Longitude < 0) sign = '-';
                                else sign = '+';
                                i1 = abs(GPSData.Position.Longitude)/10000000L;
                                i2 = abs(GPSData.Position.Longitude)%10000000L;
                                LCD_printfxy(0,1,"Lon:%c%03ld.%07ld deg",sign, i1, i2);
                                if(GPSData.Position.Latitude < 0) sign = '-';
                                else sign = '+';
                                i1 = abs(GPSData.Position.Latitude)/10000000L;
                                i2 = abs(GPSData.Position.Latitude)%10000000L;
                                LCD_printfxy(0,2,"Lat:%c%03ld.%07ld deg",sign, i1, i2);
                                if(GPSData.Position.Altitude < 0) sign = '-';
                                else sign = '+';
                                i1 = abs(GPSData.Position.Altitude)/1000L;
                                i2 = abs(GPSData.Position.Altitude)%1000L;
                                LCD_printfxy(0,3,"Alt:%c%04ld.%03ld m", sign, i1, i2);
                        }
                        break;
                case 2:
                        if (GPSData.Status == INVALID)
                        {
                                LCD_printfxy(0,0,"No GPS data");
                                LCD_printfxy(0,1,"Speed N:            ");
                                LCD_printfxy(0,2,"Speed E:            ");
                                LCD_printfxy(0,3,"Speed T:            ");
                        }
                        else // newdata or processed
                        {
                                LCD_printfxy(0,0,"Sat:%02d ", GPSData.NumOfSats);
                                switch (GPSData.SatFix)
                                {
                                case SATFIX_NONE:
                                        LCD_printfxy(7,0,"NoFix");
                                        break;
                                case SATFIX_2D:
                                        LCD_printfxy(7,0,"2DFix");
                                        break;
                                case SATFIX_3D:
                                        LCD_printfxy(7,0,"3DFix");
                                        break;
                                default:
                                        LCD_printfxy(7,0,"??Fix");
                                        break;
                                }
                                if(GPSData.Flags & FLAG_DIFFSOLN)
                                {
                                        LCD_printfxy(12,0,"/DGPS");
                                }
                                else
                                {
                                        LCD_printfxy(12,0,"     ");
                                }
 
                                LCD_printfxy(0,1,"Speed N: %+4ld cm/s",GPSData.Speed_North);
                                LCD_printfxy(0,2,"Speed E: %+4ld cm/s",GPSData.Speed_East);
                                LCD_printfxy(0,3,"Speed T: %+4ld cm/s",GPSData.Speed_Top);
                        }
                        break;
                case 3:
                        LCD_printfxy(0,0,"GPS UTC Time");
                        if (!SystemTime.Valid)
                        {
                                LCD_printfxy(0,1,"                    ");
                                LCD_printfxy(0,2,"  No time data!     ");
                                LCD_printfxy(0,3,"                    ");
                        }
                        else // newdata or processed
                        {
                                LCD_printfxy(0,1,"                    ");
                                LCD_printfxy(0,2,"Date: %02i/%02i/%04i",SystemTime.Month, SystemTime.Day, SystemTime.Year);
                                LCD_printfxy(0,3,"Time: %02i:%02i:%02i.%03i", SystemTime.Hour, SystemTime.Min, SystemTime.Sec, SystemTime.mSec);
                        }
                        break;
                case 4: // Navi Params 1 from FC
                        LCD_printfxy(0,0,"NaviMode: %3i" ,  Parameter.NaviGpsModeControl);
            LCD_printfxy(0,1,"G  :%3i P  :%3i ",Parameter.NaviGpsGain, Parameter.NaviGpsP);
            LCD_printfxy(0,2,"I  :%3i D  :%3i ",Parameter.NaviGpsI, Parameter.NaviGpsD);
                    LCD_printfxy(0,3,"ACC:%3i SAT:%3i ",Parameter.NaviGpsACC, Parameter.NaviGpsMinSat);
                        break;
                case 5: // Navi Params 2 from FC
                        LCD_printfxy(0,0,"Stick TS:  %3i", Parameter.NaviStickThreshold);
            LCD_printfxy(0,1,"MaxRadius: %3im", DebugOut.Analog[4]);
            LCD_printfxy(0,2,"WindCorr:  %3i", Parameter.NaviWindCorrection);
                    LCD_printfxy(0,3,"AccComp:   %3i", Parameter.NaviSpeedCompensation);
                        break;
                case 6: // Navi Params 3 from FC
                        LCD_printfxy(0,0,"Angle-Limit: %3i", Parameter.NaviAngleLimitation);
            LCD_printfxy(0,1,"    P-Limit: %3i", Parameter.NaviGpsPLimit);
            LCD_printfxy(0,2,"    I-Limit: %3i", Parameter.NaviGpsILimit);
                    LCD_printfxy(0,3,"    D-Limit: %3i", Parameter.NaviGpsDLimit);
                        break;
                case 7: // Max Ranges
                        LCD_printfxy(0,0,"Maximum flying  ");
            LCD_printfxy(0,1,"Range:   %4im ", AbsoluteFlyingRange);
            LCD_printfxy(0,2,"Descend: %4im ", AutoDescendRange);
            LCD_printfxy(0,3,"Altitude:%4im ", AbsoluteFlyingAltitude);
                        if(!AbsoluteFlyingRange) LCD_printfxy(9,1,"disabled");
                        if(!AutoDescendRange)    LCD_printfxy(9,2,"disabled");
                        if(!AbsoluteFlyingAltitude) LCD_printfxy(9,3,"disabled");
                        break;
                case 8:
                        LCD_printfxy(0,0,"Home Position");
                        if(NaviData.HomePosition.Status == INVALID)
                        {
                                LCD_printfxy(0,1,"                     ");
                                LCD_printfxy(0,2,"    Is not set.      ");
                                LCD_printfxy(0,3,"                     ");
                        }
                        else
                        {
                                if(NaviData.HomePosition.Longitude < 0) sign = '-';
                                else sign = '+';
                                i1 = abs(NaviData.HomePosition.Longitude)/10000000L;
                                i2 = abs(NaviData.HomePosition.Longitude)%10000000L;
                                LCD_printfxy(0,1,"Lon:%c%03ld.%07ld deg",sign, i1, i2);
                                if(NaviData.HomePosition.Latitude < 0) sign = '-';
                                else sign = '+';
                                i1 = abs(NaviData.HomePosition.Latitude)/10000000L;
                                i2 = abs(NaviData.HomePosition.Latitude)%10000000L;
                                LCD_printfxy(0,2,"Lat:%c%03ld.%07ld deg",sign, i1, i2);
                                if(NaviData.HomePosition.Altitude < 0) sign = '-';
                                else sign = '+';
                                i1 = abs(NaviData.HomePosition.Altitude)/1000L;
                                i2 = abs(NaviData.HomePosition.Altitude)%1000L;
                                LCD_printfxy(0,3,"Alt:%c%04ld.%03ld m",sign, i1, i2);
                        }
                        break;
                case 9:
                        LCD_printfxy(0,0,"Target Position");
                        if(NaviData.TargetPosition.Status == INVALID)
                        {
                                LCD_printfxy(0,1,"                     ");
                                LCD_printfxy(0,2,"    Is not set.      ");
                                LCD_printfxy(0,3,"                     ");
                        }
                        else
                        {
                                if(NaviData.TargetPosition.Longitude < 0) sign = '-';
                                else sign = '+';
                                i1 = abs(NaviData.TargetPosition.Longitude)/10000000L;
                                i2 = abs(NaviData.TargetPosition.Longitude)%10000000L;
                                LCD_printfxy(0,1,"Lon:%c%03ld.%07ld deg",sign, i1, i2);
                                if(NaviData.TargetPosition.Latitude < 0) sign = '-';
                                else sign = '+';
                                i1 = abs(NaviData.TargetPosition.Latitude)/10000000L;
                                i2 = abs(NaviData.TargetPosition.Latitude)%10000000L;
                                LCD_printfxy(0,2,"Lat:%c%03ld.%07ld deg",sign, i1, i2);
                                if(NaviData.HomePosition.Altitude < 0) sign = '-';
                                else sign = '+';
                                i1 = abs(NaviData.TargetPosition.Altitude)/1000L;
                                i2 = abs(NaviData.TargetPosition.Altitude)%1000L;
                                LCD_printfxy(0,3,"Alt:%c%04ld.%03ld m",sign, i1, i2);
                        }
                        break;
                case 10: // RC stick controls from FC
                        LCD_printfxy(0,0,"RC-Sticks" );
            LCD_printfxy(0,1,"Ni:%4i  Ro:%4i ",FC.StickNick, FC.StickRoll);
            LCD_printfxy(0,2,"Gs:%4i  Ya:%4i ",FC.StickGas, FC.StickYaw);
                        break;
                case 11: // RC poti controls from FC
                        LCD_printfxy(0,0,"RC-Potis 1" );
            LCD_printfxy(0,1,"Po1:%3i  Po2:%3i ",FC.Poti[0], FC.Poti[1]);
            LCD_printfxy(0,2,"Po3:%3i  Po4:%3i ",FC.Poti[2], FC.Poti[3]);
                        break;
                case 12: // RC poti controls from FC
                        LCD_printfxy(0,0,"RC-Potis 2" );
            LCD_printfxy(0,1,"Po5:%3i  Po6:%3i ",FC.Poti[4], FC.Poti[5]);
            LCD_printfxy(0,2,"Po7:%3i  Po8:%3i ",FC.Poti[6], FC.Poti[7]);
                        break;
                case 13: // attitude from FC
                        if(FromFlightCtrl.AngleNick < 0) sign = '-';
                        else sign = '+';
                        i1 = abs(FromFlightCtrl.AngleNick)/10;
                        i2 = abs(FromFlightCtrl.AngleNick)%10;
                        LCD_printfxy(0,0,"GyroNick:%c%03ld.%01ld", sign, i1, i2);
                        if(FromFlightCtrl.AngleRoll < 0) sign = '-';
                        else sign = '+';
                        i1 = abs(FromFlightCtrl.AngleRoll)/10;
                        i2 = abs(FromFlightCtrl.AngleRoll)%10;
            LCD_printfxy(0,1,"GyroRoll:%c%03ld.%01ld", sign, i1, i2);
                        if(FromFlightCtrl.AccNick < 0) sign = '-';
                        else sign = '+';
                        i1 = abs(FromFlightCtrl.AccNick)/10;
                        i2 = abs(FromFlightCtrl.AccNick)%10;
                        LCD_printfxy(0,2," AccNick:%c%03ld.%01ld", sign, i1, i2);
                        if(FromFlightCtrl.AccRoll < 0) sign = '-';
                        else sign = '+';
                        i1 = abs(FromFlightCtrl.AccRoll)/10;
                        i2 = abs(FromFlightCtrl.AccRoll)%10;
            LCD_printfxy(0,3," AccRoll:%c%03ld.%01ld", sign, i1, i2);
                        break;
                case 14: // gyros from FC
                        LCD_printfxy(0,0,"GyroNick:  %4i", FromFlightCtrl.GyroNick);
            LCD_printfxy(0,1,"GyroRoll:  %4i", FromFlightCtrl.GyroRoll);
                        LCD_printfxy(0,2,"GyroYaw:   %4i", FromFlightCtrl.GyroYaw);
                        break;
                case 15: // Remote Control Level from FC
            LCD_printfxy(0,0,"RC-Level:    %3i", FC.RC_Quality);
                        LCD_printfxy(0,1,"Ubat:        %2i.%1i V", FC.BAT_Voltage/10, FC.BAT_Voltage%10);
                        LCD_printfxy(0,2,"CompHeading: %3i", Compass_Heading);
                        if(GeoMagDec < 0) sign = '-';
                        else sign = '+';
                        LCD_printfxy(0,3,"GeoMagDec:  %c%i.%1i", sign, abs(GeoMagDec)/10,abs(GeoMagDec)%10);
            break;
                case 16: // User Parameter
                        LCD_printfxy(0,0,"UP1:%3i  UP2:%3i",Parameter.User1,Parameter.User2);
                        LCD_printfxy(0,1,"UP3:%3i  UP4:%3i",Parameter.User3,Parameter.User4);
                        LCD_printfxy(0,2,"UP5:%3i  UP6:%3i",Parameter.User5,Parameter.User6);
                        LCD_printfxy(0,3,"UP7:%3i  UP8:%3i",Parameter.User7,Parameter.User8);
                        break;
                case 17: // User Parameter
                        LCD_printfxy(0,0,"SD-Card Logs",Parameter.User1,Parameter.User2);
                        LCD_printfxy(0,1,"GPX:%4i (%3ims) ",Logged_GPX_Counter,LogCfg.GPX_Interval);
                        LCD_printfxy(0,2,"KML:%4i (%3ims) ",Logged_KML_Counter,LogCfg.KML_Interval);
                        break;
                case 18: // magnetic field
                        if(Compass_CalState)
                        {
                                LCD_printfxy(0,0,"Calibration:");
                                LCD_printfxy(0,1,"Step %d/", Compass_CalState);
                                LCD_printfxy(0,2,"X %4i Y %4i Z %4i",MagVector.X,MagVector.Y,MagVector.Z);
                                LCD_printfxy(9,3,"(ESC)(NEXT)");
                                switch(Compass_CalState)
                                {
                                        case 1:
                                        case 3:
                                                LCD_printfxy(7,1,"pause");
                                                break;
 
                                        case 2:
                                                LCD_printfxy(7,1,"horizontal");
                                                break;
 
                                        case 4:
                                                LCD_printfxy(7,1,"vertical");
                                                break;
 
                                        case 5:
                                                LCD_printfxy(7,1,"data saved");
                                                LCD_printfxy(8,3,"      (END) ");
                                                break;
                                       
                                        default:
                                                break;
                                }
                        }
                        else
                        {
                                if(GeoMagDec < 0) sign = '-';
                                else sign = '+';
                                LCD_printfxy(0,0,"Magnetic Field");
                                LCD_printfxy(0,1,"X:%5i",MagVector.X);
                                LCD_printfxy(0,2,"Y:%5i",MagVector.Y);
                                LCD_printfxy(0,3,"Z:%5i",MagVector.Z);
                                LCD_printfxy(8,1,"Field:%3i",EarthMagneticField/5);
//                              LCD_printfxy(8,2,"Dec:%c%i.%1i", sign, abs(GeoMagDec)/10,abs(GeoMagDec)%10);
//                              LCD_printfxy(8,3,"Inc:%2i", EarthMagneticInclination);
                                LCD_printfxy(15,3,"(CAL)");
                        }
                        if(Keys & KEY4) //  next step
                        {
                                if(Compass_CalState <5) Compass_SetCalState(Compass_CalState+1);
                                else Compass_SetCalState(0);
                        }
                        if(Keys & KEY3)Compass_SetCalState(0);  // cancel
                        break;
                case 19:
                        if(GeoMagDec < 0) sign = '-';
                        else sign = '+';
                                LCD_printfxy(0,0,"Magnetic Field");
                                LCD_printfxy(0,1,"Field:%3i (Percent)",EarthMagneticField/5);
                                LCD_printfxy(0,2,"Declination:%c%i.%1i ", sign, abs(GeoMagDec)/10,abs(GeoMagDec)%10);
                                LCD_printfxy(0,3,"Inclination:%2i (%2i)", EarthMagneticInclination,     EarthMagneticInclinationTheoretic);
                        break;
                default:
                        //MaxMenuItem = MenuItem - 1;
                        MenuItem = 0;
                        break;
    }
}
 

Rev 357	Rev 380
1	/#######################################################################################/	1	/#######################################################################################/
2	/* !!! THIS IS NOT FREE SOFTWARE !!! */	2	/* !!! THIS IS NOT FREE SOFTWARE !!! */
3	/#######################################################################################/	3	/#######################################################################################/
4	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++	4	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
5	// + Copyright (c) 2008 Ingo Busker, Holger Buss	5	// + Copyright (c) 2008 Ingo Busker, Holger Buss
6	// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY	6	// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
7	// + FOR NON COMMERCIAL USE ONLY	7	// + FOR NON COMMERCIAL USE ONLY
8	// + www.MikroKopter.com	8	// + www.MikroKopter.com
9	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++	9	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
10	// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),	10	// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),
11	// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist.	11	// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist.
12	// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt	12	// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt
13	// + bzgl. der Nutzungsbedingungen aufzunehmen.	13	// + bzgl. der Nutzungsbedingungen aufzunehmen.
14	// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen,	14	// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen,
15	// + Verkauf von Luftbildaufnahmen, usw.	15	// + Verkauf von Luftbildaufnahmen, usw.
16	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++	16	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
17	// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,	17	// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,
18	// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen	18	// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen
19	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++	19	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
20	// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts	20	// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts
21	// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"	21	// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"
22	// + eindeutig als Ursprung verlinkt werden	22	// + eindeutig als Ursprung verlinkt werden
23	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++	23	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
24	// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion	24	// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion
25	// + Benutzung auf eigene Gefahr	25	// + Benutzung auf eigene Gefahr
26	// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden	26	// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
27	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++	27	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
28	// + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur	28	// + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
29	// + mit unserer Zustimmung zulässig	29	// + mit unserer Zustimmung zulässig
30	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++	30	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
31	// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen	31	// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
32	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++	32	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
33	// + Redistributions of source code (with or without modifications) must retain the above copyright notice,	33	// + Redistributions of source code (with or without modifications) must retain the above copyright notice,
34	// + this list of conditions and the following disclaimer.	34	// + this list of conditions and the following disclaimer.
35	// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived	35	// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived
36	// + from this software without specific prior written permission.	36	// + from this software without specific prior written permission.
37	// + * The use of this project (hardware, software, binary files, sources and documentation) is only permitted	37	// + * The use of this project (hardware, software, binary files, sources and documentation) is only permitted
38	// + for non-commercial use (directly or indirectly)	38	// + for non-commercial use (directly or indirectly)
39	// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted	39	// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted
40	// + with our written permission	40	// + with our written permission
41	// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be	41	// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
42	// + clearly linked as origin	42	// + clearly linked as origin
43	// + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed	43	// + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed
44	//	44	//
45	// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"	45	// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
46	// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE	46	// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
47	// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE	47	// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
48	// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE	48	// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
49	// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR	49	// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
50	// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF	50	// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
51	// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS	51	// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
52	// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN	52	// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
53	// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)	53	// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
54	// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE	54	// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
55	// + POSSIBILITY OF SUCH DAMAGE.	55	// + POSSIBILITY OF SUCH DAMAGE.
56	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++	56	// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
57	#include <stdlib.h>	57	#include <stdlib.h>
58	#include "91x_lib.h"	58	#include "91x_lib.h"
59	#include "main.h"	59	#include "main.h"
60	#include "led.h"	60	#include "led.h"
61	#include "ubx.h"	61	#include "ubx.h"
62	#include "GPS.h"	62	#include "GPS.h"
63	#include "timer1.h"	63	#include "timer1.h"
64	#include "compass.h"	64	#include "compass.h"
65	#include "spi_slave.h"	65	#include "spi_slave.h"
66	#include "menu.h"	66	#include "menu.h"
67	#include "uart1.h"	67	#include "uart1.h"
68	#include "ncmag.h"	68	#include "ncmag.h"
-		69	#include "logging.h"
69		70
70	u8 DispPtr = 0;	71	u8 DispPtr = 0;
71	s8 DisplayBuff[DISPLAYBUFFSIZE];	72	s8 DisplayBuff[DISPLAYBUFFSIZE];
72		73
73		74
74	u8 MenuItem = 0;	75	u8 MenuItem = 0;
75	u8 MaxMenuItem = 18;	76	u8 MaxMenuItem = 18;
76		77
77	void Menu_Putchar(char c)	78	void Menu_Putchar(char c)
78	{	79	{
79	if(DispPtr < DISPLAYBUFFSIZE) DisplayBuff[DispPtr++] = c; ;	80	if(DispPtr < DISPLAYBUFFSIZE) DisplayBuff[DispPtr++] = c; ;
80	}	81	}
81		82
82	void Menu_Clear(void)	83	void Menu_Clear(void)
83	{	84	{
84	u8 i;	85	u8 i;
85	for( i = 0; i < DISPLAYBUFFSIZE; i++) DisplayBuff[i] = ' ';	86	for( i = 0; i < DISPLAYBUFFSIZE; i++) DisplayBuff[i] = ' ';
86	}	87	}
87		88
88		89
89	// Display with 20 characters in 4 lines	90	// Display with 20 characters in 4 lines
90	void Menu_Update(u8 Keys)	91	void Menu_Update(u8 Keys)
91	{	92	{
92	s32 i1,i2;	93	s32 i1,i2;
93	u8 sign;	94	u8 sign;
94		95
95	if(Keys & KEY1) { if(MenuItem > 0) MenuItem--; else MenuItem = MaxMenuItem;}	96	if(Keys & KEY1) { if(MenuItem > 0) MenuItem--; else MenuItem = MaxMenuItem;}
96	if(Keys & KEY2) { if(MenuItem == MaxMenuItem) MenuItem = 0; else MenuItem++;}	97	if(Keys & KEY2) { if(MenuItem == MaxMenuItem) MenuItem = 0; else MenuItem++;}
97	if((Keys & KEY1) && (Keys & KEY2)) MenuItem = 0;	98	if((Keys & KEY1) && (Keys & KEY2)) MenuItem = 0;
98	if(MenuItem > MaxMenuItem) MenuItem = MaxMenuItem;	99	if(MenuItem > MaxMenuItem) MenuItem = MaxMenuItem;
99	Menu_Clear();	100	Menu_Clear();
100	// print menu item number in the upper right corner	101	// print menu item number in the upper right corner
101	if(MenuItem < 10)	102	if(MenuItem < 10)
102	{	103	{
103	LCD_printfxy(17,0,"[%i]",MenuItem);	104	LCD_printfxy(17,0,"[%i]",MenuItem);
104	}	105	}
105	else // Menuitem >= 10	106	else // Menuitem >= 10
106	{	107	{
107	LCD_printfxy(16,0,"[%i]",MenuItem);	108	LCD_printfxy(16,0,"[%i]",MenuItem);
108	}	109	}
109		110
110	switch(MenuItem)	111	switch(MenuItem)
111	{	112	{
112	// Version Info	113	// Version Info
113	case 0:	114	case 0:
114	LCD_printfxy(0,0,"++ Navi-Ctrl ++");	115	LCD_printfxy(0,0,"++ Navi-Ctrl ++");
115	LCD_printfxy(0,1,"HW V%d.%d SW V%d.%d%c", Version_HW/10, Version_HW%10, VERSION_MAJOR, VERSION_MINOR, 'a'+ VERSION_PATCH);	116	LCD_printfxy(0,1,"HW V%d.%d SW V%d.%d%c", Version_HW/10, Version_HW%10, VERSION_MAJOR, VERSION_MINOR, 'a'+ VERSION_PATCH);
116		117
117	if(ErrorCode)	118	if(ErrorCode)
118	{	119	{
119	LCD_printfxy(0,2,"Error: %d",ErrorCode);	120	LCD_printfxy(0,2,"Error: %d",ErrorCode);
120	LCD_printfxy(0,3,"%s",ErrorMSG);	121	LCD_printfxy(0,3,"%s",ErrorMSG);
121	}	122	}
122	else	123	else
123	{	124	{
124	LCD_printfxy(0,3,"(c) Buss, Busker");	125	LCD_printfxy(0,3,"(c) HiSystems GmbH");
125	LCD_printfxy(0,2,"%s",ErrorMSG);	126	LCD_printfxy(0,2,"%s",ErrorMSG);
126	}	127	}
127	break;	128	break;
128	case 1:	129	case 1:
129	if (GPSData.Status == INVALID)	130	if (GPSData.Status == INVALID)
130	{	131	{
131	LCD_printfxy(0,0,"No GPS data");	132	LCD_printfxy(0,0,"No GPS data");
132	LCD_printfxy(0,1,"Lon: ");	133	LCD_printfxy(0,1,"Lon: ");
133	LCD_printfxy(0,2,"Lat: ");	134	LCD_printfxy(0,2,"Lat: ");
134	LCD_printfxy(0,3,"Alt: ");	135	LCD_printfxy(0,3,"Alt: ");
135	}	136	}
136	else // newdata or processed	137	else // newdata or processed
137	{	138	{
138	LCD_printfxy(0,0,"Sat:%02d ", GPSData.NumOfSats);	139	LCD_printfxy(0,0,"Sat:%02d ", GPSData.NumOfSats);
139	switch (GPSData.SatFix)	140	switch (GPSData.SatFix)
140	{	141	{
141	case SATFIX_NONE:	142	case SATFIX_NONE:
142	LCD_printfxy(7,0,"NoFix");	143	LCD_printfxy(7,0,"NoFix");
143	break;	144	break;
144	case SATFIX_2D:	145	case SATFIX_2D:
145	LCD_printfxy(7,0,"2DFix");	146	LCD_printfxy(7,0,"2DFix");
146	break;	147	break;
147	case SATFIX_3D:	148	case SATFIX_3D:
148	LCD_printfxy(7,0,"3DFix");	149	LCD_printfxy(7,0,"3DFix");
149	break;	150	break;
150	default:	151	default:
151	LCD_printfxy(7,0,"??Fix");	152	LCD_printfxy(7,0,"??Fix");
152	break;	153	break;
153	}	154	}
154	if(GPSData.Flags & FLAG_DIFFSOLN)	155	if(GPSData.Flags & FLAG_DIFFSOLN)
155	{	156	{
156	LCD_printfxy(12,0,"/DGPS");	157	LCD_printfxy(12,0,"/DGPS");
157	}	158	}
158	else	159	else
159	{	160	{
160	LCD_printfxy(12,0," ");	161	LCD_printfxy(12,0," ");
161	}	162	}
162		163
163	if(GPSData.Position.Longitude < 0) sign = '-';	164	if(GPSData.Position.Longitude < 0) sign = '-';
164	else sign = '+';	165	else sign = '+';
165	i1 = abs(GPSData.Position.Longitude)/10000000L;	166	i1 = abs(GPSData.Position.Longitude)/10000000L;
166	i2 = abs(GPSData.Position.Longitude)%10000000L;	167	i2 = abs(GPSData.Position.Longitude)%10000000L;
167	LCD_printfxy(0,1,"Lon:%c%03ld.%07ld deg",sign, i1, i2);	168	LCD_printfxy(0,1,"Lon:%c%03ld.%07ld deg",sign, i1, i2);
168	if(GPSData.Position.Latitude < 0) sign = '-';	169	if(GPSData.Position.Latitude < 0) sign = '-';
169	else sign = '+';	170	else sign = '+';
170	i1 = abs(GPSData.Position.Latitude)/10000000L;	171	i1 = abs(GPSData.Position.Latitude)/10000000L;
171	i2 = abs(GPSData.Position.Latitude)%10000000L;	172	i2 = abs(GPSData.Position.Latitude)%10000000L;
172	LCD_printfxy(0,2,"Lat:%c%03ld.%07ld deg",sign, i1, i2);	173	LCD_printfxy(0,2,"Lat:%c%03ld.%07ld deg",sign, i1, i2);
173	if(GPSData.Position.Altitude < 0) sign = '-';	174	if(GPSData.Position.Altitude < 0) sign = '-';
174	else sign = '+';	175	else sign = '+';
175	i1 = abs(GPSData.Position.Altitude)/1000L;	176	i1 = abs(GPSData.Position.Altitude)/1000L;
176	i2 = abs(GPSData.Position.Altitude)%1000L;	177	i2 = abs(GPSData.Position.Altitude)%1000L;
177	LCD_printfxy(0,3,"Alt:%c%04ld.%03ld m", sign, i1, i2);	178	LCD_printfxy(0,3,"Alt:%c%04ld.%03ld m", sign, i1, i2);
178	}	179	}
179	break;	180	break;
180	case 2:	181	case 2:
181	if (GPSData.Status == INVALID)	182	if (GPSData.Status == INVALID)
182	{	183	{
183	LCD_printfxy(0,0,"No GPS data");	184	LCD_printfxy(0,0,"No GPS data");
184	LCD_printfxy(0,1,"Speed N: ");	185	LCD_printfxy(0,1,"Speed N: ");
185	LCD_printfxy(0,2,"Speed E: ");	186	LCD_printfxy(0,2,"Speed E: ");
186	LCD_printfxy(0,3,"Speed T: ");	187	LCD_printfxy(0,3,"Speed T: ");
187	}	188	}
188	else // newdata or processed	189	else // newdata or processed
189	{	190	{
190	LCD_printfxy(0,0,"Sat:%02d ", GPSData.NumOfSats);	191	LCD_printfxy(0,0,"Sat:%02d ", GPSData.NumOfSats);
191	switch (GPSData.SatFix)	192	switch (GPSData.SatFix)
192	{	193	{
193	case SATFIX_NONE:	194	case SATFIX_NONE:
194	LCD_printfxy(7,0,"NoFix");	195	LCD_printfxy(7,0,"NoFix");
195	break;	196	break;
196	case SATFIX_2D:	197	case SATFIX_2D:
197	LCD_printfxy(7,0,"2DFix");	198	LCD_printfxy(7,0,"2DFix");
198	break;	199	break;
199	case SATFIX_3D:	200	case SATFIX_3D:
200	LCD_printfxy(7,0,"3DFix");	201	LCD_printfxy(7,0,"3DFix");
201	break;	202	break;
202	default:	203	default:
203	LCD_printfxy(7,0,"??Fix");	204	LCD_printfxy(7,0,"??Fix");
204	break;	205	break;
205	}	206	}
206	if(GPSData.Flags & FLAG_DIFFSOLN)	207	if(GPSData.Flags & FLAG_DIFFSOLN)
207	{	208	{
208	LCD_printfxy(12,0,"/DGPS");	209	LCD_printfxy(12,0,"/DGPS");
209	}	210	}
210	else	211	else
211	{	212	{
212	LCD_printfxy(12,0," ");	213	LCD_printfxy(12,0," ");
213	}	214	}
214		215
215	LCD_printfxy(0,1,"Speed N: %+4ld cm/s",GPSData.Speed_North);	216	LCD_printfxy(0,1,"Speed N: %+4ld cm/s",GPSData.Speed_North);
216	LCD_printfxy(0,2,"Speed E: %+4ld cm/s",GPSData.Speed_East);	217	LCD_printfxy(0,2,"Speed E: %+4ld cm/s",GPSData.Speed_East);
217	LCD_printfxy(0,3,"Speed T: %+4ld cm/s",GPSData.Speed_Top);	218	LCD_printfxy(0,3,"Speed T: %+4ld cm/s",GPSData.Speed_Top);
218	}	219	}
219	break;	220	break;
220	case 3:	221	case 3:
221	LCD_printfxy(0,0,"GPS UTC Time");	222	LCD_printfxy(0,0,"GPS UTC Time");
222	if (!SystemTime.Valid)	223	if (!SystemTime.Valid)
223	{	224	{
224	LCD_printfxy(0,1," ");	225	LCD_printfxy(0,1," ");
225	LCD_printfxy(0,2," No time data! ");	226	LCD_printfxy(0,2," No time data! ");
226	LCD_printfxy(0,3," ");	227	LCD_printfxy(0,3," ");
227	}	228	}
228	else // newdata or processed	229	else // newdata or processed
229	{	230	{
230	LCD_printfxy(0,1," ");	231	LCD_printfxy(0,1," ");
231	LCD_printfxy(0,2,"Date: %02i/%02i/%04i",SystemTime.Month, SystemTime.Day, SystemTime.Year);	232	LCD_printfxy(0,2,"Date: %02i/%02i/%04i",SystemTime.Month, SystemTime.Day, SystemTime.Year);
232	LCD_printfxy(0,3,"Time: %02i:%02i:%02i.%03i", SystemTime.Hour, SystemTime.Min, SystemTime.Sec, SystemTime.mSec);	233	LCD_printfxy(0,3,"Time: %02i:%02i:%02i.%03i", SystemTime.Hour, SystemTime.Min, SystemTime.Sec, SystemTime.mSec);
233	}	234	}
234	break;	235	break;
235	case 4: // Navi Params 1 from FC	236	case 4: // Navi Params 1 from FC
236	LCD_printfxy(0,0,"NaviMode: %3i" , Parameter.NaviGpsModeControl);	237	LCD_printfxy(0,0,"NaviMode: %3i" , Parameter.NaviGpsModeControl);
237	LCD_printfxy(0,1,"G :%3i P :%3i ",Parameter.NaviGpsGain, Parameter.NaviGpsP);	238	LCD_printfxy(0,1,"G :%3i P :%3i ",Parameter.NaviGpsGain, Parameter.NaviGpsP);
238	LCD_printfxy(0,2,"I :%3i D :%3i ",Parameter.NaviGpsI, Parameter.NaviGpsD);	239	LCD_printfxy(0,2,"I :%3i D :%3i ",Parameter.NaviGpsI, Parameter.NaviGpsD);
239	LCD_printfxy(0,3,"ACC:%3i SAT:%3i ",Parameter.NaviGpsACC, Parameter.NaviGpsMinSat);	240	LCD_printfxy(0,3,"ACC:%3i SAT:%3i ",Parameter.NaviGpsACC, Parameter.NaviGpsMinSat);
240	break;	241	break;
241	case 5: // Navi Params 2 from FC	242	case 5: // Navi Params 2 from FC
242	LCD_printfxy(0,0,"Stick TS: %3i", Parameter.NaviStickThreshold);	243	LCD_printfxy(0,0,"Stick TS: %3i", Parameter.NaviStickThreshold);
243	LCD_printfxy(0,1,"MaxRadius: %3im", DebugOut.Analog[4]);	244	LCD_printfxy(0,1,"MaxRadius: %3im", DebugOut.Analog[4]);
244	LCD_printfxy(0,2,"WindCorr: %3i", Parameter.NaviWindCorrection);	245	LCD_printfxy(0,2,"WindCorr: %3i", Parameter.NaviWindCorrection);
245	LCD_printfxy(0,3,"AccComp: %3i", Parameter.NaviSpeedCompensation);	246	LCD_printfxy(0,3,"AccComp: %3i", Parameter.NaviSpeedCompensation);
246	break;	247	break;
247	case 6: // Navi Params 3 from FC	248	case 6: // Navi Params 3 from FC
248	LCD_printfxy(0,0,"Angle-Limit: %3i", Parameter.NaviAngleLimitation);	249	LCD_printfxy(0,0,"Angle-Limit: %3i", Parameter.NaviAngleLimitation);
249	LCD_printfxy(0,1," P-Limit: %3i", Parameter.NaviGpsPLimit);	250	LCD_printfxy(0,1," P-Limit: %3i", Parameter.NaviGpsPLimit);
250	LCD_printfxy(0,2," I-Limit: %3i", Parameter.NaviGpsILimit);	251	LCD_printfxy(0,2," I-Limit: %3i", Parameter.NaviGpsILimit);
251	LCD_printfxy(0,3," D-Limit: %3i", Parameter.NaviGpsDLimit);	252	LCD_printfxy(0,3," D-Limit: %3i", Parameter.NaviGpsDLimit);
252	break;	253	break;
253	case 7: // Max Ranges	254	case 7: // Max Ranges
254	LCD_printfxy(0,0,"Maximum flying ");	255	LCD_printfxy(0,0,"Maximum flying ");
255	LCD_printfxy(0,1,"Range: %4im ", AbsoluteFlyingRange);	256	LCD_printfxy(0,1,"Range: %4im ", AbsoluteFlyingRange);
256	LCD_printfxy(0,2,"Descend: %4im ", AutoDescendRange);	257	LCD_printfxy(0,2,"Descend: %4im ", AutoDescendRange);
257	LCD_printfxy(0,3,"Altitude:%4im ", AbsoluteFlyingAltitude);	258	LCD_printfxy(0,3,"Altitude:%4im ", AbsoluteFlyingAltitude);
258	if(!AbsoluteFlyingRange) LCD_printfxy(9,1,"disabled");	259	if(!AbsoluteFlyingRange) LCD_printfxy(9,1,"disabled");
259	if(!AutoDescendRange) LCD_printfxy(9,2,"disabled");	260	if(!AutoDescendRange) LCD_printfxy(9,2,"disabled");
260	if(!AbsoluteFlyingAltitude) LCD_printfxy(9,3,"disabled");	261	if(!AbsoluteFlyingAltitude) LCD_printfxy(9,3,"disabled");
261	break;	262	break;
262	case 8:	263	case 8:
263	LCD_printfxy(0,0,"Home Position");	264	LCD_printfxy(0,0,"Home Position");
264	if(NaviData.HomePosition.Status == INVALID)	265	if(NaviData.HomePosition.Status == INVALID)
265	{	266	{
266	LCD_printfxy(0,1," ");	267	LCD_printfxy(0,1," ");
267	LCD_printfxy(0,2," Is not set. ");	268	LCD_printfxy(0,2," Is not set. ");
268	LCD_printfxy(0,3," ");	269	LCD_printfxy(0,3," ");
269	}	270	}
270	else	271	else
271	{	272	{
272	if(NaviData.HomePosition.Longitude < 0) sign = '-';	273	if(NaviData.HomePosition.Longitude < 0) sign = '-';
273	else sign = '+';	274	else sign = '+';
274	i1 = abs(NaviData.HomePosition.Longitude)/10000000L;	275	i1 = abs(NaviData.HomePosition.Longitude)/10000000L;
275	i2 = abs(NaviData.HomePosition.Longitude)%10000000L;	276	i2 = abs(NaviData.HomePosition.Longitude)%10000000L;
276	LCD_printfxy(0,1,"Lon:%c%03ld.%07ld deg",sign, i1, i2);	277	LCD_printfxy(0,1,"Lon:%c%03ld.%07ld deg",sign, i1, i2);
277	if(NaviData.HomePosition.Latitude < 0) sign = '-';	278	if(NaviData.HomePosition.Latitude < 0) sign = '-';
278	else sign = '+';	279	else sign = '+';
279	i1 = abs(NaviData.HomePosition.Latitude)/10000000L;	280	i1 = abs(NaviData.HomePosition.Latitude)/10000000L;
280	i2 = abs(NaviData.HomePosition.Latitude)%10000000L;	281	i2 = abs(NaviData.HomePosition.Latitude)%10000000L;
281	LCD_printfxy(0,2,"Lat:%c%03ld.%07ld deg",sign, i1, i2);	282	LCD_printfxy(0,2,"Lat:%c%03ld.%07ld deg",sign, i1, i2);
282	if(NaviData.HomePosition.Altitude < 0) sign = '-';	283	if(NaviData.HomePosition.Altitude < 0) sign = '-';
283	else sign = '+';	284	else sign = '+';
284	i1 = abs(NaviData.HomePosition.Altitude)/1000L;	285	i1 = abs(NaviData.HomePosition.Altitude)/1000L;
285	i2 = abs(NaviData.HomePosition.Altitude)%1000L;	286	i2 = abs(NaviData.HomePosition.Altitude)%1000L;
286	LCD_printfxy(0,3,"Alt:%c%04ld.%03ld m",sign, i1, i2);	287	LCD_printfxy(0,3,"Alt:%c%04ld.%03ld m",sign, i1, i2);
287	}	288	}
288	break;	289	break;
289	case 9:	290	case 9:
290	LCD_printfxy(0,0,"Target Position");	291	LCD_printfxy(0,0,"Target Position");
291	if(NaviData.TargetPosition.Status == INVALID)	292	if(NaviData.TargetPosition.Status == INVALID)
292	{	293	{
293	LCD_printfxy(0,1," ");	294	LCD_printfxy(0,1," ");
294	LCD_printfxy(0,2," Is not set. ");	295	LCD_printfxy(0,2," Is not set. ");
295	LCD_printfxy(0,3," ");	296	LCD_printfxy(0,3," ");
296	}	297	}
297	else	298	else
298	{	299	{
299	if(NaviData.TargetPosition.Longitude < 0) sign = '-';	300	if(NaviData.TargetPosition.Longitude < 0) sign = '-';
300	else sign = '+';	301	else sign = '+';
301	i1 = abs(NaviData.TargetPosition.Longitude)/10000000L;	302	i1 = abs(NaviData.TargetPosition.Longitude)/10000000L;
302	i2 = abs(NaviData.TargetPosition.Longitude)%10000000L;	303	i2 = abs(NaviData.TargetPosition.Longitude)%10000000L;
303	LCD_printfxy(0,1,"Lon:%c%03ld.%07ld deg",sign, i1, i2);	304	LCD_printfxy(0,1,"Lon:%c%03ld.%07ld deg",sign, i1, i2);
304	if(NaviData.TargetPosition.Latitude < 0) sign = '-';	305	if(NaviData.TargetPosition.Latitude < 0) sign = '-';
305	else sign = '+';	306	else sign = '+';
306	i1 = abs(NaviData.TargetPosition.Latitude)/10000000L;	307	i1 = abs(NaviData.TargetPosition.Latitude)/10000000L;
307	i2 = abs(NaviData.TargetPosition.Latitude)%10000000L;	308	i2 = abs(NaviData.TargetPosition.Latitude)%10000000L;
308	LCD_printfxy(0,2,"Lat:%c%03ld.%07ld deg",sign, i1, i2);	309	LCD_printfxy(0,2,"Lat:%c%03ld.%07ld deg",sign, i1, i2);
309	if(NaviData.HomePosition.Altitude < 0) sign = '-';	310	if(NaviData.HomePosition.Altitude < 0) sign = '-';
310	else sign = '+';	311	else sign = '+';
311	i1 = abs(NaviData.TargetPosition.Altitude)/1000L;	312	i1 = abs(NaviData.TargetPosition.Altitude)/1000L;
312	i2 = abs(NaviData.TargetPosition.Altitude)%1000L;	313	i2 = abs(NaviData.TargetPosition.Altitude)%1000L;
313	LCD_printfxy(0,3,"Alt:%c%04ld.%03ld m",sign, i1, i2);	314	LCD_printfxy(0,3,"Alt:%c%04ld.%03ld m",sign, i1, i2);
314	}	315	}
315	break;	316	break;
316	case 10: // RC stick controls from FC	317	case 10: // RC stick controls from FC
317	LCD_printfxy(0,0,"RC-Sticks" );	318	LCD_printfxy(0,0,"RC-Sticks" );
318	LCD_printfxy(0,1,"Ni:%4i Ro:%4i ",FC.StickNick, FC.StickRoll);	319	LCD_printfxy(0,1,"Ni:%4i Ro:%4i ",FC.StickNick, FC.StickRoll);
319	LCD_printfxy(0,2,"Gs:%4i Ya:%4i ",FC.StickGas, FC.StickYaw);	320	LCD_printfxy(0,2,"Gs:%4i Ya:%4i ",FC.StickGas, FC.StickYaw);
320	break;	321	break;
321	case 11: // RC poti controls from FC	322	case 11: // RC poti controls from FC
322	LCD_printfxy(0,0,"RC-Potis 1" );	323	LCD_printfxy(0,0,"RC-Potis 1" );
323	LCD_printfxy(0,1,"Po1:%3i Po2:%3i ",FC.Poti[0], FC.Poti[1]);	324	LCD_printfxy(0,1,"Po1:%3i Po2:%3i ",FC.Poti[0], FC.Poti[1]);
324	LCD_printfxy(0,2,"Po3:%3i Po4:%3i ",FC.Poti[2], FC.Poti[3]);	325	LCD_printfxy(0,2,"Po3:%3i Po4:%3i ",FC.Poti[2], FC.Poti[3]);
325	break;	326	break;
326	case 12: // RC poti controls from FC	327	case 12: // RC poti controls from FC
327	LCD_printfxy(0,0,"RC-Potis 2" );	328	LCD_printfxy(0,0,"RC-Potis 2" );
328	LCD_printfxy(0,1,"Po5:%3i Po6:%3i ",FC.Poti[4], FC.Poti[5]);	329	LCD_printfxy(0,1,"Po5:%3i Po6:%3i ",FC.Poti[4], FC.Poti[5]);
329	LCD_printfxy(0,2,"Po7:%3i Po8:%3i ",FC.Poti[6], FC.Poti[7]);	330	LCD_printfxy(0,2,"Po7:%3i Po8:%3i ",FC.Poti[6], FC.Poti[7]);
330	break;	331	break;
331	case 13: // attitude from FC	332	case 13: // attitude from FC
332	if(FromFlightCtrl.AngleNick < 0) sign = '-';	333	if(FromFlightCtrl.AngleNick < 0) sign = '-';
333	else sign = '+';	334	else sign = '+';
334	i1 = abs(FromFlightCtrl.AngleNick)/10;	335	i1 = abs(FromFlightCtrl.AngleNick)/10;
335	i2 = abs(FromFlightCtrl.AngleNick)%10;	336	i2 = abs(FromFlightCtrl.AngleNick)%10;
336	LCD_printfxy(0,0,"GyroNick:%c%03ld.%01ld", sign, i1, i2);	337	LCD_printfxy(0,0,"GyroNick:%c%03ld.%01ld", sign, i1, i2);
337	if(FromFlightCtrl.AngleRoll < 0) sign = '-';	338	if(FromFlightCtrl.AngleRoll < 0) sign = '-';
338	else sign = '+';	339	else sign = '+';
339	i1 = abs(FromFlightCtrl.AngleRoll)/10;	340	i1 = abs(FromFlightCtrl.AngleRoll)/10;
340	i2 = abs(FromFlightCtrl.AngleRoll)%10;	341	i2 = abs(FromFlightCtrl.AngleRoll)%10;
341	LCD_printfxy(0,1,"GyroRoll:%c%03ld.%01ld", sign, i1, i2);	342	LCD_printfxy(0,1,"GyroRoll:%c%03ld.%01ld", sign, i1, i2);
342	if(FromFlightCtrl.AccNick < 0) sign = '-';	343	if(FromFlightCtrl.AccNick < 0) sign = '-';
343	else sign = '+';	344	else sign = '+';
344	i1 = abs(FromFlightCtrl.AccNick)/10;	345	i1 = abs(FromFlightCtrl.AccNick)/10;
345	i2 = abs(FromFlightCtrl.AccNick)%10;	346	i2 = abs(FromFlightCtrl.AccNick)%10;
346	LCD_printfxy(0,2," AccNick:%c%03ld.%01ld", sign, i1, i2);	347	LCD_printfxy(0,2," AccNick:%c%03ld.%01ld", sign, i1, i2);
347	if(FromFlightCtrl.AccRoll < 0) sign = '-';	348	if(FromFlightCtrl.AccRoll < 0) sign = '-';
348	else sign = '+';	349	else sign = '+';
349	i1 = abs(FromFlightCtrl.AccRoll)/10;	350	i1 = abs(FromFlightCtrl.AccRoll)/10;
350	i2 = abs(FromFlightCtrl.AccRoll)%10;	351	i2 = abs(FromFlightCtrl.AccRoll)%10;
351	LCD_printfxy(0,3," AccRoll:%c%03ld.%01ld", sign, i1, i2);	352	LCD_printfxy(0,3," AccRoll:%c%03ld.%01ld", sign, i1, i2);
352	break;	353	break;
353	case 14: // gyros from FC	354	case 14: // gyros from FC
354	LCD_printfxy(0,0,"GyroNick: %4i", FromFlightCtrl.GyroNick);	355	LCD_printfxy(0,0,"GyroNick: %4i", FromFlightCtrl.GyroNick);
355	LCD_printfxy(0,1,"GyroRoll: %4i", FromFlightCtrl.GyroRoll);	356	LCD_printfxy(0,1,"GyroRoll: %4i", FromFlightCtrl.GyroRoll);
356	LCD_printfxy(0,2,"GyroYaw: %4i", FromFlightCtrl.GyroYaw);	357	LCD_printfxy(0,2,"GyroYaw: %4i", FromFlightCtrl.GyroYaw);
357	break;	358	break;
358	case 15: // Remote Control Level from FC	359	case 15: // Remote Control Level from FC
359	LCD_printfxy(0,0,"RC-Level: %3i", FC.RC_Quality);	360	LCD_printfxy(0,0,"RC-Level: %3i", FC.RC_Quality);
360	LCD_printfxy(0,1,"Ubat: %2i.%1i V", FC.BAT_Voltage/10, FC.BAT_Voltage%10);	361	LCD_printfxy(0,1,"Ubat: %2i.%1i V", FC.BAT_Voltage/10, FC.BAT_Voltage%10);
361	LCD_printfxy(0,2,"CompHeading: %3i", Compass_Heading);	362	LCD_printfxy(0,2,"CompHeading: %3i", Compass_Heading);
362	if(GeoMagDec < 0) sign = '-';	363	if(GeoMagDec < 0) sign = '-';
363	else sign = '+';	364	else sign = '+';
364	LCD_printfxy(0,3,"GeoMagDec: %c%i.%1i", sign, abs(GeoMagDec)/10,abs(GeoMagDec)%10);	365	LCD_printfxy(0,3,"GeoMagDec: %c%i.%1i", sign, abs(GeoMagDec)/10,abs(GeoMagDec)%10);
365	break;	366	break;
366	case 16: // User Parameter	367	case 16: // User Parameter
367	LCD_printfxy(0,0,"UP1:%3i UP2:%3i",Parameter.User1,Parameter.User2);	368	LCD_printfxy(0,0,"UP1:%3i UP2:%3i",Parameter.User1,Parameter.User2);
368	LCD_printfxy(0,1,"UP3:%3i UP4:%3i",Parameter.User3,Parameter.User4);	369	LCD_printfxy(0,1,"UP3:%3i UP4:%3i",Parameter.User3,Parameter.User4);
369	LCD_printfxy(0,2,"UP5:%3i UP6:%3i",Parameter.User5,Parameter.User6);	370	LCD_printfxy(0,2,"UP5:%3i UP6:%3i",Parameter.User5,Parameter.User6);
370	LCD_printfxy(0,3,"UP7:%3i UP8:%3i",Parameter.User7,Parameter.User8);	371	LCD_printfxy(0,3,"UP7:%3i UP8:%3i",Parameter.User7,Parameter.User8);
371	break;	372	break;
-		373	case 17: // User Parameter
-		374	LCD_printfxy(0,0,"SD-Card Logs",Parameter.User1,Parameter.User2);
-		375	LCD_printfxy(0,1,"GPX:%4i (%3ims) ",Logged_GPX_Counter,LogCfg.GPX_Interval);
-		376	LCD_printfxy(0,2,"KML:%4i (%3ims) ",Logged_KML_Counter,LogCfg.KML_Interval);
-		377	break;
372	case 17: // magnetic field	378	case 18: // magnetic field
373	if(Compass_CalState)	379	if(Compass_CalState)
374	{	380	{
375	LCD_printfxy(0,0,"Calibration:");	381	LCD_printfxy(0,0,"Calibration:");
376	LCD_printfxy(0,1,"Step %d/", Compass_CalState);	382	LCD_printfxy(0,1,"Step %d/", Compass_CalState);
377	LCD_printfxy(0,2,"X %4i Y %4i Z %4i",MagVector.X,MagVector.Y,MagVector.Z);	383	LCD_printfxy(0,2,"X %4i Y %4i Z %4i",MagVector.X,MagVector.Y,MagVector.Z);
378	LCD_printfxy(9,3,"(ESC)(NEXT)");	384	LCD_printfxy(9,3,"(ESC)(NEXT)");
379	switch(Compass_CalState)	385	switch(Compass_CalState)
380	{	386	{
381	case 1:	387	case 1:
382	case 3:	388	case 3:
383	LCD_printfxy(7,1,"pause");	389	LCD_printfxy(7,1,"pause");
384	break;	390	break;
385		391
386	case 2:	392	case 2:
387	LCD_printfxy(7,1,"horizontal");	393	LCD_printfxy(7,1,"horizontal");
388	break;	394	break;
389		395
390	case 4:	396	case 4:
391	LCD_printfxy(7,1,"vertical");	397	LCD_printfxy(7,1,"vertical");
392	break;	398	break;
393		399
394	case 5:	400	case 5:
395	LCD_printfxy(7,1,"data saved");	401	LCD_printfxy(7,1,"data saved");
396	LCD_printfxy(8,3," (END) ");	402	LCD_printfxy(8,3," (END) ");
397	break;	403	break;
398		404
399	default:	405	default:
400	break;	406	break;
401	}	407	}
402	}	408	}
403	else	409	else
404	{	410	{
405	if(GeoMagDec < 0) sign = '-';	411	if(GeoMagDec < 0) sign = '-';
406	else sign = '+';	412	else sign = '+';
407	LCD_printfxy(0,0,"Magnetic Field");	413	LCD_printfxy(0,0,"Magnetic Field");
408	LCD_printfxy(0,1,"X:%5i",MagVector.X);	414	LCD_printfxy(0,1,"X:%5i",MagVector.X);
409	LCD_printfxy(0,2,"Y:%5i",MagVector.Y);	415	LCD_printfxy(0,2,"Y:%5i",MagVector.Y);
410	LCD_printfxy(0,3,"Z:%5i",MagVector.Z);	416	LCD_printfxy(0,3,"Z:%5i",MagVector.Z);
411	LCD_printfxy(8,1,"Field:%3i",EarthMagneticField/5);	417	LCD_printfxy(8,1,"Field:%3i",EarthMagneticField/5);
412	// LCD_printfxy(8,2,"Dec:%c%i.%1i", sign, abs(GeoMagDec)/10,abs(GeoMagDec)%10);	418	// LCD_printfxy(8,2,"Dec:%c%i.%1i", sign, abs(GeoMagDec)/10,abs(GeoMagDec)%10);
413	// LCD_printfxy(8,3,"Inc:%2i", EarthMagneticInclination);	419	// LCD_printfxy(8,3,"Inc:%2i", EarthMagneticInclination);
414	LCD_printfxy(15,3,"(CAL)");	420	LCD_printfxy(15,3,"(CAL)");
415	}	421	}
416	if(Keys & KEY4) // next step	422	if(Keys & KEY4) // next step
417	{	423	{
418	if(Compass_CalState <5) Compass_SetCalState(Compass_CalState+1);	424	if(Compass_CalState <5) Compass_SetCalState(Compass_CalState+1);
419	else Compass_SetCalState(0);	425	else Compass_SetCalState(0);
420	}	426	}
421	if(Keys & KEY3)Compass_SetCalState(0); // cancel	427	if(Keys & KEY3)Compass_SetCalState(0); // cancel
422	break;	428	break;
423	case 18:	429	case 19:
424	if(GeoMagDec < 0) sign = '-';	430	if(GeoMagDec < 0) sign = '-';
425	else sign = '+';	431	else sign = '+';
426	LCD_printfxy(0,0,"Magnetic Field");	432	LCD_printfxy(0,0,"Magnetic Field");
427	LCD_printfxy(0,1,"Field:%3i (Percent)",EarthMagneticField/5);	433	LCD_printfxy(0,1,"Field:%3i (Percent)",EarthMagneticField/5);
428	LCD_printfxy(0,2,"Declination:%c%i.%1i ", sign, abs(GeoMagDec)/10,abs(GeoMagDec)%10);	434	LCD_printfxy(0,2,"Declination:%c%i.%1i ", sign, abs(GeoMagDec)/10,abs(GeoMagDec)%10);
429	LCD_printfxy(0,3,"Inclination:%2i (%2i)", EarthMagneticInclination, EarthMagneticInclinationTheoretic);	435	LCD_printfxy(0,3,"Inclination:%2i (%2i)", EarthMagneticInclination, EarthMagneticInclinationTheoretic);
430	break;	436	break;
431	default:	437	default:
432	//MaxMenuItem = MenuItem - 1;	438	//MaxMenuItem = MenuItem - 1;
433	MenuItem = 0;	439	MenuItem = 0;
434	break;	440	break;
435	}	441	}
436	}	442	}
437		443

Subversion Repositories NaviCtrl

(root)/tags/V0.28i/menu.c @ 742 - Rev 357 → 380