WebSVN - FlightCtrl - Diff - Rev 849 and 855 - /branches/FC_V070d_ACC-HH


#--------------------------------------------------------------------
# MCU name
MCU = atmega644
F_CPU = 20000000
#-------------------------------------------------------------------
HAUPT_VERSION    =   0
NEBEN_VERSION    =  69
VERSION_INDEX    =   7
 
VERSION_KOMPATIBEL = 7  # PC-Kompatibilität
#-------------------------------------------------------------------
 
ifeq ($(MCU), atmega32)
# FUSE_SETTINGS= -u -U lfuse:w:0xff:m -U hfuse:w:0xcf:m
 
 HEX_NAME = MEGA32
endif
 
ifeq ($(MCU), atmega644)
FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m
#FUSE_SETTINGS = -U lfuse:w:0xff:m -U hfuse:w:0xdf:m  
# -u  bei neuen Controllern wieder einspielen
 HEX_NAME = MEGA644
endif
 
ifeq ($(MCU), atmega644p)
 FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m
 HEX_NAME = MEGA644
endif
 
 
ifeq ($(F_CPU), 16000000)
 QUARZ = 16MHZ
endif
 
ifeq ($(F_CPU), 20000000)
 QUARZ = 20MHZ
endif
 
 
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
 
# Target file name (without extension).
 
ifeq ($(VERSION_INDEX), 0)
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)a
endif
ifeq ($(VERSION_INDEX), 1)
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)b
endif
ifeq ($(VERSION_INDEX), 2)
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)c
endif
ifeq ($(VERSION_INDEX), 3)
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)d
endif
ifeq ($(VERSION_INDEX), 4)
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)e
endif
ifeq ($(VERSION_INDEX), 5)
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)f
endif
ifeq ($(VERSION_INDEX), 6)
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)g
endif
ifeq ($(VERSION_INDEX), 7)
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)h
endif
ifeq ($(VERSION_INDEX), 8)
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)i
endif
ifeq ($(VERSION_INDEX), 9)
TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)j
endif
 
# Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
 
##########################################################################################################
# List C source files here. (C dependencies are automatically generated.)
SRC = main.c uart.c  printf_P.c timer0.c  analog.c menu.c 
SRC += twimaster.c rc.c fc.c GPS.c spi.c
 
##########################################################################################################
 
 
# List Assembler source files here.
# Make them always end in a capital .S.  Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC = 
 
 
 
# List any extra directories to look for include files here.
#     Each directory must be seperated by a space.
EXTRAINCDIRS = 
 
 
# Optional compiler flags.
#  -g:        generate debugging information (for GDB, or for COFF conversion)
#  -O*:       optimization level
#  -f...:     tuning, see gcc manual and avr-libc documentation
#  -Wall...:  warning level
#  -Wa,...:   tell GCC to pass this to the assembler.
#    -ahlms:  create assembler listing
CFLAGS = -O$(OPT) \
-funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums \
-Wall -Wstrict-prototypes \
-Wa,-adhlns=$(<:.c=.lst) \
$(patsubst %,-I%,$(EXTRAINCDIRS))
 
 
# Set a "language standard" compiler flag.
#   Unremark just one line below to set the language standard to use.
#   gnu99 = C99 + GNU extensions. See GCC manual for more information.
#CFLAGS += -std=c89
#CFLAGS += -std=gnu89
#CFLAGS += -std=c99
CFLAGS += -std=gnu99
 
CFLAGS += -DVERSION_HAUPTVERSION=$(HAUPT_VERSION) -DVERSION_NEBENVERSION=$(NEBEN_VERSION) -DVERSION_KOMPATIBEL=$(VERSION_KOMPATIBEL) -DVERSION_INDEX=$(VERSION_INDEX)
 
 
# Optional assembler flags.
#  -Wa,...:   tell GCC to pass this to the assembler.
#  -ahlms:    create listing
#  -gstabs:   have the assembler create line number information; note that
#             for use in COFF files, additional information about filenames
#             and function names needs to be present in the assembler source
#             files -- see avr-libc docs [FIXME: not yet described there]
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
 
 
 
# Optional linker flags.
#  -Wl,...:   tell GCC to pass this to linker.
#  -Map:      create map file
#  --cref:    add cross reference to  map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
 
# Additional libraries
 
# Minimalistic printf version
#LDFLAGS += -Wl,-u,vfprintf -lprintf_min
 
# Floating point printf version (requires -lm below)
#LDFLAGS += -Wl,-u,vfprintf -lprintf_flt
 
# -lm = math library
LDFLAGS += -lm
 
 
##LDFLAGS += -T./linkerfile/avr5.x
 
 
 
# Programming support using avrdude. Settings and variables.
 
# Programming hardware: alf avr910 avrisp bascom bsd 
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
#AVRDUDE_PROGRAMMER = dt006
#AVRDUDE_PROGRAMMER = stk200
#AVRDUDE_PROGRAMMER = ponyser
AVRDUDE_PROGRAMMER = avrispv2
#falls Ponyser ausgewählt wird, muss sich unsere avrdude-Configdatei im Bin-Verzeichnis des Compilers befinden
 
#AVRDUDE_PORT = com1    # programmer connected to serial device
#AVRDUDE_PORT = lpt1    # programmer connected to parallel port
AVRDUDE_PORT = usb # programmer connected to USB
 
#AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex 
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex $(FUSE_SETTINGS)
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 
#avrdude -c avrispv2 -P usb -p m32 -U flash:w:blink.hex
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE += -y
 
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
AVRDUDE_FLAGS += -V
 
# Increase verbosity level.  Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
# to submit bug reports.
#AVRDUDE_FLAGS += -v -v
 
# ---------------------------------------------------------------------------
# Define directories, if needed.
DIRAVR = c:/winavr
DIRAVRBIN = $(DIRAVR)/bin
DIRAVRUTILS = $(DIRAVR)/utils/bin
DIRINC = .
DIRLIB = $(DIRAVR)/avr/lib
 
 
# Define programs and commands.
SHELL = sh
 
CC = avr-gcc
 
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
 
# Programming support using avrdude.
AVRDUDE = avrdude
 
REMOVE = rm -f
COPY = cp
 
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) -A $(TARGET).elf
 
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = --------  end  --------
MSG_SIZE_BEFORE = Size before: 
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
 
 
# Define all object files.
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) 
 
# Define all listing files.
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
 
# Combine all necessary flags and optional flags.
# Add target processor to flags.
#ALL_CFLAGS = -mmcu=$(MCU) -DF_CPU=$(F_CPU) -I. $(CFLAGS)
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
# Default target.
all: begin gccversion sizebefore $(TARGET).elf $(TARGET).hex $(TARGET).eep \
	$(TARGET).lss $(TARGET).sym sizeafter finished end
 
 
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
	@echo
	@echo $(MSG_BEGIN)
 
finished:
	@echo $(MSG_ERRORS_NONE)
 
end:
	@echo $(MSG_END)
	@echo
 
 
# Display size of file.
sizebefore:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
 
sizeafter:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
 
 
 
# Display compiler version information.
gccversion : 
	@$(CC) --version
 
 
# Convert ELF to COFF for use in debugging / simulating in
# AVR Studio or VMLAB.
COFFCONVERT=$(OBJCOPY) --debugging \
	--change-section-address .data-0x800000 \
	--change-section-address .bss-0x800000 \
	--change-section-address .noinit-0x800000 \
	--change-section-address .eeprom-0x810000 
 
 
coff: $(TARGET).elf
	@echo
	@echo $(MSG_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 
 
extcoff: $(TARGET).elf
	@echo
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 
 
 
 
# Program the device.  
program: $(TARGET).hex $(TARGET).eep
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
 
 
 
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
	@echo
	@echo $(MSG_FLASH) $@
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 
%.eep: %.elf
	@echo
	@echo $(MSG_EEPROM) $@
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
 
# Create extended listing file from ELF output file.
%.lss: %.elf
	@echo
	@echo $(MSG_EXTENDED_LISTING) $@
	$(OBJDUMP) -h -S $< > $@
 
# Create a symbol table from ELF output file.
%.sym: %.elf
	@echo
	@echo $(MSG_SYMBOL_TABLE) $@
	avr-nm -n $< > $@
 
 
 
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
	@echo
	@echo $(MSG_LINKING) $@
	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
 
 
# Compile: create object files from C source files.
%.o : %.c
	@echo
	@echo $(MSG_COMPILING) $<
	$(CC) -c $(ALL_CFLAGS) $< -o $@
 
 
# Compile: create assembler files from C source files.
%.s : %.c
	$(CC) -S $(ALL_CFLAGS) $< -o $@
 
 
# Assemble: create object files from assembler source files.
%.o : %.S
	@echo
	@echo $(MSG_ASSEMBLING) $<
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
 
 
 
 
 
 
# Target: clean project.
clean: begin clean_list finished end
 
clean_list :
	@echo
	@echo $(MSG_CLEANING)
#	$(REMOVE) $(TARGET).hex
	$(REMOVE) $(TARGET).eep
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).cof
	$(REMOVE) $(TARGET).elf
	$(REMOVE) $(TARGET).map
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).a90
	$(REMOVE) $(TARGET).sym
	$(REMOVE) $(TARGET).lnk
	$(REMOVE) $(TARGET).lss
	$(REMOVE) $(OBJ)
	$(REMOVE) $(LST)
	$(REMOVE) $(SRC:.c=.s)
	$(REMOVE) $(SRC:.c=.d)
 
 
# Automatically generate C source code dependencies. 
# (Code originally taken from the GNU make user manual and modified 
# (See README.txt Credits).)
#
# Note that this will work with sh (bash) and sed that is shipped with WinAVR
# (see the SHELL variable defined above).
# This may not work with other shells or other seds.
#
%.d: %.c
	set -e; $(CC) -MM $(ALL_CFLAGS) $< \
	| sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > $@; \
	[ -s $@ ] || rm -f $@
 
 
# Remove the '-' if you want to see the dependency files generated.
-include $(SRC:.c=.d)
 
 
 
# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \
	clean clean_list program
 

Rev 849	Rev 855
1	#--------------------------------------------------------------------	1	#--------------------------------------------------------------------
2	# MCU name	2	# MCU name
3	MCU = atmega644	3	MCU = atmega644
4	F_CPU = 20000000	4	F_CPU = 20000000
5	#-------------------------------------------------------------------	5	#-------------------------------------------------------------------
6	HAUPT_VERSION = 0	6	HAUPT_VERSION = 0
7	NEBEN_VERSION = 69	7	NEBEN_VERSION = 69
8	VERSION_INDEX = 6	8	VERSION_INDEX = 7
9		9
10	VERSION_KOMPATIBEL = 7 # PC-Kompatibilität	10	VERSION_KOMPATIBEL = 7 # PC-Kompatibilität
11	#-------------------------------------------------------------------	11	#-------------------------------------------------------------------
12		12
13	ifeq ($(MCU), atmega32)	13	ifeq ($(MCU), atmega32)
14	# FUSE_SETTINGS= -u -U lfuse:w:0xff:m -U hfuse:w:0xcf:m	14	# FUSE_SETTINGS= -u -U lfuse:w:0xff:m -U hfuse:w:0xcf:m
15		15
16	HEX_NAME = MEGA32	16	HEX_NAME = MEGA32
17	endif	17	endif
18		18
19	ifeq ($(MCU), atmega644)	19	ifeq ($(MCU), atmega644)
20	FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m	20	FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m
21	#FUSE_SETTINGS = -U lfuse:w:0xff:m -U hfuse:w:0xdf:m	21	#FUSE_SETTINGS = -U lfuse:w:0xff:m -U hfuse:w:0xdf:m
22	# -u bei neuen Controllern wieder einspielen	22	# -u bei neuen Controllern wieder einspielen
23	HEX_NAME = MEGA644	23	HEX_NAME = MEGA644
24	endif	24	endif
25		25
26	ifeq ($(MCU), atmega644p)	26	ifeq ($(MCU), atmega644p)
27	FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m	27	FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m
28	HEX_NAME = MEGA644	28	HEX_NAME = MEGA644
29	endif	29	endif
30		30
31		31
32	ifeq ($(F_CPU), 16000000)	32	ifeq ($(F_CPU), 16000000)
33	QUARZ = 16MHZ	33	QUARZ = 16MHZ
34	endif	34	endif
35		35
36	ifeq ($(F_CPU), 20000000)	36	ifeq ($(F_CPU), 20000000)
37	QUARZ = 20MHZ	37	QUARZ = 20MHZ
38	endif	38	endif
39		39
40		40
41	# Output format. (can be srec, ihex, binary)	41	# Output format. (can be srec, ihex, binary)
42	FORMAT = ihex	42	FORMAT = ihex
43		43
44	# Target file name (without extension).	44	# Target file name (without extension).
45		45
46	ifeq ($(VERSION_INDEX), 0)	46	ifeq ($(VERSION_INDEX), 0)
47	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)a	47	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)a
48	endif	48	endif
49	ifeq ($(VERSION_INDEX), 1)	49	ifeq ($(VERSION_INDEX), 1)
50	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)b	50	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)b
51	endif	51	endif
52	ifeq ($(VERSION_INDEX), 2)	52	ifeq ($(VERSION_INDEX), 2)
53	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)c	53	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)c
54	endif	54	endif
55	ifeq ($(VERSION_INDEX), 3)	55	ifeq ($(VERSION_INDEX), 3)
56	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)d	56	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)d
57	endif	57	endif
58	ifeq ($(VERSION_INDEX), 4)	58	ifeq ($(VERSION_INDEX), 4)
59	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)e	59	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)e
60	endif	60	endif
61	ifeq ($(VERSION_INDEX), 5)	61	ifeq ($(VERSION_INDEX), 5)
62	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)f	62	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)f
63	endif	63	endif
64	ifeq ($(VERSION_INDEX), 6)	64	ifeq ($(VERSION_INDEX), 6)
65	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)g	65	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)g
66	endif	66	endif
67	ifeq ($(VERSION_INDEX), 7)	67	ifeq ($(VERSION_INDEX), 7)
68	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)h	68	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)h
69	endif	69	endif
-		70	ifeq ($(VERSION_INDEX), 8)
-		71	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)i
-		72	endif
-		73	ifeq ($(VERSION_INDEX), 9)
-		74	TARGET = Flight-Ctrl_$(HEX_NAME)_V$(HAUPT_VERSION)_$(NEBEN_VERSION)j
-		75	endif
70		76
71	# Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization.	77	# Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization.
72	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)	78	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
73	OPT = s	79	OPT = s
74		80
75	##########################################################################################################	81	##########################################################################################################
76	# List C source files here. (C dependencies are automatically generated.)	82	# List C source files here. (C dependencies are automatically generated.)
77	SRC = main.c uart.c printf_P.c timer0.c analog.c menu.c	83	SRC = main.c uart.c printf_P.c timer0.c analog.c menu.c
78	SRC += twimaster.c rc.c fc.c GPS.c spi.c	84	SRC += twimaster.c rc.c fc.c GPS.c spi.c
79		85
80	##########################################################################################################	86	##########################################################################################################
81		87
82		88
83	# List Assembler source files here.	89	# List Assembler source files here.
84	# Make them always end in a capital .S. Files ending in a lowercase .s	90	# Make them always end in a capital .S. Files ending in a lowercase .s
85	# will not be considered source files but generated files (assembler	91	# will not be considered source files but generated files (assembler
86	# output from the compiler), and will be deleted upon "make clean"!	92	# output from the compiler), and will be deleted upon "make clean"!
87	# Even though the DOS/Win* filesystem matches both .s and .S the same,	93	# Even though the DOS/Win* filesystem matches both .s and .S the same,
88	# it will preserve the spelling of the filenames, and gcc itself does	94	# it will preserve the spelling of the filenames, and gcc itself does
89	# care about how the name is spelled on its command-line.	95	# care about how the name is spelled on its command-line.
90	ASRC =	96	ASRC =
91		97
92		98
93		99
94	# List any extra directories to look for include files here.	100	# List any extra directories to look for include files here.
95	# Each directory must be seperated by a space.	101	# Each directory must be seperated by a space.
96	EXTRAINCDIRS =	102	EXTRAINCDIRS =
97		103
98		104
99	# Optional compiler flags.	105	# Optional compiler flags.
100	# -g: generate debugging information (for GDB, or for COFF conversion)	106	# -g: generate debugging information (for GDB, or for COFF conversion)
101	# -O*: optimization level	107	# -O*: optimization level
102	# -f...: tuning, see gcc manual and avr-libc documentation	108	# -f...: tuning, see gcc manual and avr-libc documentation
103	# -Wall...: warning level	109	# -Wall...: warning level
104	# -Wa,...: tell GCC to pass this to the assembler.	110	# -Wa,...: tell GCC to pass this to the assembler.
105	# -ahlms: create assembler listing	111	# -ahlms: create assembler listing
106	CFLAGS = -O$(OPT) \	112	CFLAGS = -O$(OPT) \
107	-funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums \	113	-funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums \
108	-Wall -Wstrict-prototypes \	114	-Wall -Wstrict-prototypes \
109	-Wa,-adhlns=$(<:.c=.lst) \	115	-Wa,-adhlns=$(<:.c=.lst) \
110	$(patsubst %,-I%,$(EXTRAINCDIRS))	116	$(patsubst %,-I%,$(EXTRAINCDIRS))
111		117
112		118
113	# Set a "language standard" compiler flag.	119	# Set a "language standard" compiler flag.
114	# Unremark just one line below to set the language standard to use.	120	# Unremark just one line below to set the language standard to use.
115	# gnu99 = C99 + GNU extensions. See GCC manual for more information.	121	# gnu99 = C99 + GNU extensions. See GCC manual for more information.
116	#CFLAGS += -std=c89	122	#CFLAGS += -std=c89
117	#CFLAGS += -std=gnu89	123	#CFLAGS += -std=gnu89
118	#CFLAGS += -std=c99	124	#CFLAGS += -std=c99
119	CFLAGS += -std=gnu99	125	CFLAGS += -std=gnu99
120		126
121	CFLAGS += -DVERSION_HAUPTVERSION=$(HAUPT_VERSION) -DVERSION_NEBENVERSION=$(NEBEN_VERSION) -DVERSION_KOMPATIBEL=$(VERSION_KOMPATIBEL) -DVERSION_INDEX=$(VERSION_INDEX)	127	CFLAGS += -DVERSION_HAUPTVERSION=$(HAUPT_VERSION) -DVERSION_NEBENVERSION=$(NEBEN_VERSION) -DVERSION_KOMPATIBEL=$(VERSION_KOMPATIBEL) -DVERSION_INDEX=$(VERSION_INDEX)
122		128
123		129
124	# Optional assembler flags.	130	# Optional assembler flags.
125	# -Wa,...: tell GCC to pass this to the assembler.	131	# -Wa,...: tell GCC to pass this to the assembler.
126	# -ahlms: create listing	132	# -ahlms: create listing
127	# -gstabs: have the assembler create line number information; note that	133	# -gstabs: have the assembler create line number information; note that
128	# for use in COFF files, additional information about filenames	134	# for use in COFF files, additional information about filenames
129	# and function names needs to be present in the assembler source	135	# and function names needs to be present in the assembler source
130	# files -- see avr-libc docs [FIXME: not yet described there]	136	# files -- see avr-libc docs [FIXME: not yet described there]
131	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs	137	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
132		138
133		139
134		140
135	# Optional linker flags.	141	# Optional linker flags.
136	# -Wl,...: tell GCC to pass this to linker.	142	# -Wl,...: tell GCC to pass this to linker.
137	# -Map: create map file	143	# -Map: create map file
138	# --cref: add cross reference to map file	144	# --cref: add cross reference to map file
139	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref	145	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
140		146
141	# Additional libraries	147	# Additional libraries
142		148
143	# Minimalistic printf version	149	# Minimalistic printf version
144	#LDFLAGS += -Wl,-u,vfprintf -lprintf_min	150	#LDFLAGS += -Wl,-u,vfprintf -lprintf_min
145		151
146	# Floating point printf version (requires -lm below)	152	# Floating point printf version (requires -lm below)
147	#LDFLAGS += -Wl,-u,vfprintf -lprintf_flt	153	#LDFLAGS += -Wl,-u,vfprintf -lprintf_flt
148		154
149	# -lm = math library	155	# -lm = math library
150	LDFLAGS += -lm	156	LDFLAGS += -lm
151		157
152		158
153	##LDFLAGS += -T./linkerfile/avr5.x	159	##LDFLAGS += -T./linkerfile/avr5.x
154		160
155		161
156		162
157	# Programming support using avrdude. Settings and variables.	163	# Programming support using avrdude. Settings and variables.
158		164
159	# Programming hardware: alf avr910 avrisp bascom bsd	165	# Programming hardware: alf avr910 avrisp bascom bsd
160	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500	166	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
161	#	167	#
162	# Type: avrdude -c ?	168	# Type: avrdude -c ?
163	# to get a full listing.	169	# to get a full listing.
164	#	170	#
165	#AVRDUDE_PROGRAMMER = dt006	171	#AVRDUDE_PROGRAMMER = dt006
166	#AVRDUDE_PROGRAMMER = stk200	172	#AVRDUDE_PROGRAMMER = stk200
167	#AVRDUDE_PROGRAMMER = ponyser	173	#AVRDUDE_PROGRAMMER = ponyser
168	AVRDUDE_PROGRAMMER = avrispv2	174	AVRDUDE_PROGRAMMER = avrispv2
169	#falls Ponyser ausgewählt wird, muss sich unsere avrdude-Configdatei im Bin-Verzeichnis des Compilers befinden	175	#falls Ponyser ausgewählt wird, muss sich unsere avrdude-Configdatei im Bin-Verzeichnis des Compilers befinden
170		176
171	#AVRDUDE_PORT = com1 # programmer connected to serial device	177	#AVRDUDE_PORT = com1 # programmer connected to serial device
172	#AVRDUDE_PORT = lpt1 # programmer connected to parallel port	178	#AVRDUDE_PORT = lpt1 # programmer connected to parallel port
173	AVRDUDE_PORT = usb # programmer connected to USB	179	AVRDUDE_PORT = usb # programmer connected to USB
174		180
175	#AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex	181	#AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
176	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex $(FUSE_SETTINGS)	182	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex $(FUSE_SETTINGS)
177	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep	183	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
178		184
179	#avrdude -c avrispv2 -P usb -p m32 -U flash:w:blink.hex	185	#avrdude -c avrispv2 -P usb -p m32 -U flash:w:blink.hex
180	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)	186	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
181		187
182	# Uncomment the following if you want avrdude's erase cycle counter.	188	# Uncomment the following if you want avrdude's erase cycle counter.
183	# Note that this counter needs to be initialized first using -Yn,	189	# Note that this counter needs to be initialized first using -Yn,
184	# see avrdude manual.	190	# see avrdude manual.
185	#AVRDUDE_ERASE += -y	191	#AVRDUDE_ERASE += -y
186		192
187	# Uncomment the following if you do /not/ wish a verification to be	193	# Uncomment the following if you do /not/ wish a verification to be
188	# performed after programming the device.	194	# performed after programming the device.
189	AVRDUDE_FLAGS += -V	195	AVRDUDE_FLAGS += -V
190		196
191	# Increase verbosity level. Please use this when submitting bug	197	# Increase verbosity level. Please use this when submitting bug
192	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>	198	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
193	# to submit bug reports.	199	# to submit bug reports.
194	#AVRDUDE_FLAGS += -v -v	200	#AVRDUDE_FLAGS += -v -v
195		201
196	# ---------------------------------------------------------------------------	202	# ---------------------------------------------------------------------------
197	# Define directories, if needed.	203	# Define directories, if needed.
198	DIRAVR = c:/winavr	204	DIRAVR = c:/winavr
199	DIRAVRBIN = $(DIRAVR)/bin	205	DIRAVRBIN = $(DIRAVR)/bin
200	DIRAVRUTILS = $(DIRAVR)/utils/bin	206	DIRAVRUTILS = $(DIRAVR)/utils/bin
201	DIRINC = .	207	DIRINC = .
202	DIRLIB = $(DIRAVR)/avr/lib	208	DIRLIB = $(DIRAVR)/avr/lib
203		209
204		210
205	# Define programs and commands.	211	# Define programs and commands.
206	SHELL = sh	212	SHELL = sh
207		213
208	CC = avr-gcc	214	CC = avr-gcc
209		215
210	OBJCOPY = avr-objcopy	216	OBJCOPY = avr-objcopy
211	OBJDUMP = avr-objdump	217	OBJDUMP = avr-objdump
212	SIZE = avr-size	218	SIZE = avr-size
213		219
214	# Programming support using avrdude.	220	# Programming support using avrdude.
215	AVRDUDE = avrdude	221	AVRDUDE = avrdude
216		222
217	REMOVE = rm -f	223	REMOVE = rm -f
218	COPY = cp	224	COPY = cp
219		225
220	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex	226	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
221	ELFSIZE = $(SIZE) -A $(TARGET).elf	227	ELFSIZE = $(SIZE) -A $(TARGET).elf
222		228
223	# Define Messages	229	# Define Messages
224	# English	230	# English
225	MSG_ERRORS_NONE = Errors: none	231	MSG_ERRORS_NONE = Errors: none
226	MSG_BEGIN = -------- begin --------	232	MSG_BEGIN = -------- begin --------
227	MSG_END = -------- end --------	233	MSG_END = -------- end --------
228	MSG_SIZE_BEFORE = Size before:	234	MSG_SIZE_BEFORE = Size before:
229	MSG_SIZE_AFTER = Size after:	235	MSG_SIZE_AFTER = Size after:
230	MSG_COFF = Converting to AVR COFF:	236	MSG_COFF = Converting to AVR COFF:
231	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:	237	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
232	MSG_FLASH = Creating load file for Flash:	238	MSG_FLASH = Creating load file for Flash:
233	MSG_EEPROM = Creating load file for EEPROM:	239	MSG_EEPROM = Creating load file for EEPROM:
234	MSG_EXTENDED_LISTING = Creating Extended Listing:	240	MSG_EXTENDED_LISTING = Creating Extended Listing:
235	MSG_SYMBOL_TABLE = Creating Symbol Table:	241	MSG_SYMBOL_TABLE = Creating Symbol Table:
236	MSG_LINKING = Linking:	242	MSG_LINKING = Linking:
237	MSG_COMPILING = Compiling:	243	MSG_COMPILING = Compiling:
238	MSG_ASSEMBLING = Assembling:	244	MSG_ASSEMBLING = Assembling:
239	MSG_CLEANING = Cleaning project:	245	MSG_CLEANING = Cleaning project:
240		246
241		247
242	# Define all object files.	248	# Define all object files.
243	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)	249	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
244		250
245	# Define all listing files.	251	# Define all listing files.
246	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)	252	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
247		253
248	# Combine all necessary flags and optional flags.	254	# Combine all necessary flags and optional flags.
249	# Add target processor to flags.	255	# Add target processor to flags.
250	#ALL_CFLAGS = -mmcu=$(MCU) -DF_CPU=$(F_CPU) -I. $(CFLAGS)	256	#ALL_CFLAGS = -mmcu=$(MCU) -DF_CPU=$(F_CPU) -I. $(CFLAGS)
251	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)	257	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
252	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)	258	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
253		259
254		260
255	# Default target.	261	# Default target.
256	all: begin gccversion sizebefore $(TARGET).elf $(TARGET).hex $(TARGET).eep \	262	all: begin gccversion sizebefore $(TARGET).elf $(TARGET).hex $(TARGET).eep \
257	$(TARGET).lss $(TARGET).sym sizeafter finished end	263	$(TARGET).lss $(TARGET).sym sizeafter finished end
258		264
259		265
260	# Eye candy.	266	# Eye candy.
261	# AVR Studio 3.x does not check make's exit code but relies on	267	# AVR Studio 3.x does not check make's exit code but relies on
262	# the following magic strings to be generated by the compile job.	268	# the following magic strings to be generated by the compile job.
263	begin:	269	begin:
264	@echo	270	@echo
265	@echo $(MSG_BEGIN)	271	@echo $(MSG_BEGIN)
266		272
267	finished:	273	finished:
268	@echo $(MSG_ERRORS_NONE)	274	@echo $(MSG_ERRORS_NONE)
269		275
270	end:	276	end:
271	@echo $(MSG_END)	277	@echo $(MSG_END)
272	@echo	278	@echo
273		279
274		280
275	# Display size of file.	281	# Display size of file.
276	sizebefore:	282	sizebefore:
277	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi	283	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
278		284
279	sizeafter:	285	sizeafter:
280	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi	286	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
281		287
282		288
283		289
284	# Display compiler version information.	290	# Display compiler version information.
285	gccversion :	291	gccversion :
286	@$(CC) --version	292	@$(CC) --version
287		293
288		294
289	# Convert ELF to COFF for use in debugging / simulating in	295	# Convert ELF to COFF for use in debugging / simulating in
290	# AVR Studio or VMLAB.	296	# AVR Studio or VMLAB.
291	COFFCONVERT=$(OBJCOPY) --debugging \	297	COFFCONVERT=$(OBJCOPY) --debugging \
292	--change-section-address .data-0x800000 \	298	--change-section-address .data-0x800000 \
293	--change-section-address .bss-0x800000 \	299	--change-section-address .bss-0x800000 \
294	--change-section-address .noinit-0x800000 \	300	--change-section-address .noinit-0x800000 \
295	--change-section-address .eeprom-0x810000	301	--change-section-address .eeprom-0x810000
296		302
297		303
298	coff: $(TARGET).elf	304	coff: $(TARGET).elf
299	@echo	305	@echo
300	@echo $(MSG_COFF) $(TARGET).cof	306	@echo $(MSG_COFF) $(TARGET).cof
301	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof	307	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
302		308
303		309
304	extcoff: $(TARGET).elf	310	extcoff: $(TARGET).elf
305	@echo	311	@echo
306	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof	312	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
307	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof	313	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
308		314
309		315
310		316
311		317
312	# Program the device.	318	# Program the device.
313	program: $(TARGET).hex $(TARGET).eep	319	program: $(TARGET).hex $(TARGET).eep
314	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)	320	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
315		321
316		322
317		323
318		324
319	# Create final output files (.hex, .eep) from ELF output file.	325	# Create final output files (.hex, .eep) from ELF output file.
320	%.hex: %.elf	326	%.hex: %.elf
321	@echo	327	@echo
322	@echo $(MSG_FLASH) $@	328	@echo $(MSG_FLASH) $@
323	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@	329	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
324		330
325	%.eep: %.elf	331	%.eep: %.elf
326	@echo	332	@echo
327	@echo $(MSG_EEPROM) $@	333	@echo $(MSG_EEPROM) $@
328	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \	334	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
329	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@	335	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
330		336
331	# Create extended listing file from ELF output file.	337	# Create extended listing file from ELF output file.
332	%.lss: %.elf	338	%.lss: %.elf
333	@echo	339	@echo
334	@echo $(MSG_EXTENDED_LISTING) $@	340	@echo $(MSG_EXTENDED_LISTING) $@
335	$(OBJDUMP) -h -S $< > $@	341	$(OBJDUMP) -h -S $< > $@
336		342
337	# Create a symbol table from ELF output file.	343	# Create a symbol table from ELF output file.
338	%.sym: %.elf	344	%.sym: %.elf
339	@echo	345	@echo
340	@echo $(MSG_SYMBOL_TABLE) $@	346	@echo $(MSG_SYMBOL_TABLE) $@
341	avr-nm -n $< > $@	347	avr-nm -n $< > $@
342		348
343		349
344		350
345	# Link: create ELF output file from object files.	351	# Link: create ELF output file from object files.
346	.SECONDARY : $(TARGET).elf	352	.SECONDARY : $(TARGET).elf
347	.PRECIOUS : $(OBJ)	353	.PRECIOUS : $(OBJ)
348	%.elf: $(OBJ)	354	%.elf: $(OBJ)
349	@echo	355	@echo
350	@echo $(MSG_LINKING) $@	356	@echo $(MSG_LINKING) $@
351	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)	357	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
352		358
353		359
354	# Compile: create object files from C source files.	360	# Compile: create object files from C source files.
355	%.o : %.c	361	%.o : %.c
356	@echo	362	@echo
357	@echo $(MSG_COMPILING) $<	363	@echo $(MSG_COMPILING) $<
358	$(CC) -c $(ALL_CFLAGS) $< -o $@	364	$(CC) -c $(ALL_CFLAGS) $< -o $@
359		365
360		366
361	# Compile: create assembler files from C source files.	367	# Compile: create assembler files from C source files.
362	%.s : %.c	368	%.s : %.c
363	$(CC) -S $(ALL_CFLAGS) $< -o $@	369	$(CC) -S $(ALL_CFLAGS) $< -o $@
364		370
365		371
366	# Assemble: create object files from assembler source files.	372	# Assemble: create object files from assembler source files.
367	%.o : %.S	373	%.o : %.S
368	@echo	374	@echo
369	@echo $(MSG_ASSEMBLING) $<	375	@echo $(MSG_ASSEMBLING) $<
370	$(CC) -c $(ALL_ASFLAGS) $< -o $@	376	$(CC) -c $(ALL_ASFLAGS) $< -o $@
371		377
372		378
373		379
374		380
375		381
376		382
377	# Target: clean project.	383	# Target: clean project.
378	clean: begin clean_list finished end	384	clean: begin clean_list finished end
379		385
380	clean_list :	386	clean_list :
381	@echo	387	@echo
382	@echo $(MSG_CLEANING)	388	@echo $(MSG_CLEANING)
383	# $(REMOVE) $(TARGET).hex	389	# $(REMOVE) $(TARGET).hex
384	$(REMOVE) $(TARGET).eep	390	$(REMOVE) $(TARGET).eep
385	$(REMOVE) $(TARGET).obj	391	$(REMOVE) $(TARGET).obj
386	$(REMOVE) $(TARGET).cof	392	$(REMOVE) $(TARGET).cof
387	$(REMOVE) $(TARGET).elf	393	$(REMOVE) $(TARGET).elf
388	$(REMOVE) $(TARGET).map	394	$(REMOVE) $(TARGET).map
389	$(REMOVE) $(TARGET).obj	395	$(REMOVE) $(TARGET).obj
390	$(REMOVE) $(TARGET).a90	396	$(REMOVE) $(TARGET).a90
391	$(REMOVE) $(TARGET).sym	397	$(REMOVE) $(TARGET).sym
392	$(REMOVE) $(TARGET).lnk	398	$(REMOVE) $(TARGET).lnk
393	$(REMOVE) $(TARGET).lss	399	$(REMOVE) $(TARGET).lss
394	$(REMOVE) $(OBJ)	400	$(REMOVE) $(OBJ)
395	$(REMOVE) $(LST)	401	$(REMOVE) $(LST)
396	$(REMOVE) $(SRC:.c=.s)	402	$(REMOVE) $(SRC:.c=.s)
397	$(REMOVE) $(SRC:.c=.d)	403	$(REMOVE) $(SRC:.c=.d)
398		404
399		405
400	# Automatically generate C source code dependencies.	406	# Automatically generate C source code dependencies.
401	# (Code originally taken from the GNU make user manual and modified	407	# (Code originally taken from the GNU make user manual and modified
402	# (See README.txt Credits).)	408	# (See README.txt Credits).)
403	#	409	#
404	# Note that this will work with sh (bash) and sed that is shipped with WinAVR	410	# Note that this will work with sh (bash) and sed that is shipped with WinAVR
405	# (see the SHELL variable defined above).	411	# (see the SHELL variable defined above).
406	# This may not work with other shells or other seds.	412	# This may not work with other shells or other seds.
407	#	413	#
408	%.d: %.c	414	%.d: %.c
409	set -e; $(CC) -MM $(ALL_CFLAGS) $< \	415	set -e; $(CC) -MM $(ALL_CFLAGS) $< \
410	\| sed 's,\(.\)\.o[ :],\1.o \1.d : ,g' > $@; \	416	\| sed 's,\(.\)\.o[ :],\1.o \1.d : ,g' > $@; \
411	[ -s $@ ] \|\| rm -f $@	417	[ -s $@ ] \|\| rm -f $@
412		418
413		419
414	# Remove the '-' if you want to see the dependency files generated.	420	# Remove the '-' if you want to see the dependency files generated.
415	-include $(SRC:.c=.d)	421	-include $(SRC:.c=.d)
416		422
417		423
418		424
419	# Listing of phony targets.	425	# Listing of phony targets.
420	.PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \	426	.PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \
421	clean clean_list program	427	clean clean_list program
422		428

Subversion Repositories FlightCtrl

(root)/branches/FC_V070d_ACC-HH_Umschaltung/makefile @ 1639 - Rev 849 → 855