Rev 2122 | Rev 2129 | Go to most recent revision | Only display areas with differences | Regard whitespace | Details | Blame | Last modification | View Log | RSS feed
Rev 2122 | Rev 2126 | ||
---|---|---|---|
1 | #include <stdlib.h> |
1 | #include <stdlib.h> |
2 | #include <avr/io.h> |
2 | #include <avr/io.h> |
3 | #include "eeprom.h" |
3 | #include "eeprom.h" |
4 | #include "flight.h" |
4 | #include "flight.h" |
5 | #include "output.h" |
5 | #include "output.h" |
6 | 6 | ||
7 | // Necessary for external control and motor test |
7 | // Necessary for external control and motor test |
8 | #include "uart0.h" |
8 | #include "uart0.h" |
9 | #include "timer2.h" |
9 | #include "timer2.h" |
10 | #include "analog.h" |
10 | #include "analog.h" |
11 | #include "attitude.h" |
11 | #include "attitude.h" |
12 | #include "controlMixer.h" |
12 | #include "controlMixer.h" |
13 | #include "configuration.h" |
13 | #include "configuration.h" |
14 | 14 | ||
15 | #define CHECK_MIN_MAX(value, min, max) {if(value < min) value = min; else if(value > max) value = max;} |
15 | #define CHECK_MIN_MAX(value, min, max) {if(value < min) value = min; else if(value > max) value = max;} |
16 | 16 | ||
17 | /* |
17 | /* |
18 | * target-directions integrals. |
18 | * target-directions integrals. |
19 | */ |
19 | */ |
20 | int32_t target[3]; |
20 | int32_t target[3]; |
21 | 21 | ||
22 | /* |
22 | /* |
23 | * Error integrals. |
23 | * Error integrals. |
24 | */ |
24 | */ |
25 | int32_t error[3]; |
25 | int32_t error[3]; |
26 | 26 | ||
27 | uint8_t reverse[3]; |
27 | uint8_t reverse[3]; |
28 | int32_t maxError[3]; |
28 | int32_t maxError[3]; |
29 | int32_t IPart[3] = { 0, 0, 0 }; |
29 | int32_t IPart[3] = { 0, 0, 0 }; |
30 | PID_t airspeedPID[3]; |
30 | PID_t airspeedPID[3]; |
31 | 31 | ||
32 | int16_t controlServos[NUM_CONTROL_SERVOS]; |
32 | int16_t controlServos[NUM_CONTROL_SERVOS]; |
33 | 33 | ||
34 | /************************************************************************/ |
34 | /************************************************************************/ |
35 | /* Neutral Readings */ |
35 | /* Neutral Readings */ |
36 | /************************************************************************/ |
36 | /************************************************************************/ |
37 | #define CONTROL_CONFIG_SCALE 10 |
37 | #define CONTROL_CONFIG_SCALE 10 |
38 | 38 | ||
39 | void flight_setGround(void) { |
39 | void flight_setGround(void) { |
40 | IPart[PITCH] = IPart[ROLL] = IPart[YAW] = 0; |
40 | IPart[PITCH] = IPart[ROLL] = IPart[YAW] = 0; |
41 | target[PITCH] = attitude[PITCH]; |
41 | target[PITCH] = attitude[PITCH]; |
42 | target[ROLL] = attitude[ROLL]; |
42 | target[ROLL] = attitude[ROLL]; |
43 | target[YAW] = attitude[YAW]; |
43 | target[YAW] = attitude[YAW]; |
44 | } |
44 | } |
45 | 45 | ||
46 | void flight_updateFlightParametersToFlightMode(void) { |
46 | void flight_updateFlightParametersToFlightMode(void) { |
47 | debugOut.analog[16] = currentFlightMode; |
47 | debugOut.analog[16] = currentFlightMode; |
48 | reverse[PITCH] = staticParams.servosReverse & CONTROL_SERVO_REVERSE_ELEVATOR; |
48 | reverse[PITCH] = staticParams.servosReverse & CONTROL_SERVO_REVERSE_ELEVATOR; |
49 | reverse[ROLL] = staticParams.servosReverse & CONTROL_SERVO_REVERSE_AILERONS; |
49 | reverse[ROLL] = staticParams.servosReverse & CONTROL_SERVO_REVERSE_AILERONS; |
50 | reverse[YAW] = staticParams.servosReverse & CONTROL_SERVO_REVERSE_RUDDER; |
50 | reverse[YAW] = staticParams.servosReverse & CONTROL_SERVO_REVERSE_RUDDER; |
51 | 51 | ||
52 | // At a switch to angles, we want to kill errors first. |
52 | // At a switch to angles, we want to kill errors first. |
53 | // This should be triggered only once per mode change! |
53 | // This should be triggered only once per mode change! |
54 | if (currentFlightMode == FLIGHT_MODE_ANGLES) { |
54 | if (currentFlightMode == FLIGHT_MODE_ANGLES) { |
55 | target[PITCH] = attitude[PITCH]; |
55 | target[PITCH] = attitude[PITCH]; |
56 | target[ROLL] = attitude[ROLL]; |
56 | target[ROLL] = attitude[ROLL]; |
57 | target[YAW] = attitude[YAW]; |
57 | target[YAW] = attitude[YAW]; |
58 | } |
58 | } |
59 | 59 | ||
60 | for (uint8_t axis=0; axis<3; axis++) { |
60 | for (uint8_t axis=0; axis<3; axis++) { |
61 | maxError[axis] = (int32_t)staticParams.gyroPID[axis].iMax * GYRO_DEG_FACTOR; |
61 | maxError[axis] = (int32_t)staticParams.gyroPID[axis].iMax * GYRO_DEG_FACTOR; |
62 | } |
62 | } |
63 | } |
63 | } |
64 | 64 | ||
65 | // Normal at airspeed = 10. |
65 | // Normal at airspeed = 10. |
66 | uint8_t calcAirspeedPID(uint8_t pid) { |
66 | uint8_t calcAirspeedPID(uint8_t pid) { |
67 | if (!(staticParams.bitConfig & CFG_USE_AIRSPEED_PID)) { |
67 | if (!(staticParams.bitConfig & CFG_USE_AIRSPEED_PID)) { |
68 | return pid; |
68 | return pid; |
69 | } |
69 | } |
70 | 70 | ||
71 | uint16_t result = (pid * 10) / airspeedVelocity; |
71 | uint16_t result = (pid * 10) / airspeedVelocity; |
72 | 72 | ||
73 | if (result > 240 || airspeedVelocity == 0) { |
73 | if (result > 240 || airspeedVelocity == 0) { |
74 | result = 240; |
74 | result = 240; |
75 | } |
75 | } |
76 | 76 | ||
77 | return result; |
77 | return result; |
78 | } |
78 | } |
79 | 79 | ||
80 | void setAirspeedPIDs(void) { |
80 | void setAirspeedPIDs(void) { |
81 | for (uint8_t axis = 0; axis<3; axis++) { |
81 | for (uint8_t axis = 0; axis<3; axis++) { |
82 | airspeedPID[axis].P = calcAirspeedPID(dynamicParams.gyroPID[axis].P); |
82 | airspeedPID[axis].P = calcAirspeedPID(dynamicParams.gyroPID[axis].P); |
83 | airspeedPID[axis].I = calcAirspeedPID(dynamicParams.gyroPID[axis].I); // Should this be??? |
83 | airspeedPID[axis].I = calcAirspeedPID(dynamicParams.gyroPID[axis].I); // Should this be??? |
84 | airspeedPID[axis].D = dynamicParams.gyroPID[axis].D; |
84 | airspeedPID[axis].D = dynamicParams.gyroPID[axis].D; |
85 | } |
85 | } |
86 | } |
86 | } |
87 | 87 | ||
88 | #define LOG_STICK_SCALE 8 |
88 | #define LOG_STICK_SCALE 8 |
89 | #define LOG_P_SCALE 6 |
89 | #define LOG_P_SCALE 6 |
90 | #define LOG_I_SCALE 10 |
90 | #define LOG_I_SCALE 10 |
91 | #define LOG_D_SCALE 6 |
91 | #define LOG_D_SCALE 6 |
92 | 92 | ||
93 | /************************************************************************/ |
93 | /************************************************************************/ |
94 | /* Main Flight Control */ |
94 | /* Main Flight Control */ |
95 | /************************************************************************/ |
95 | /************************************************************************/ |
96 | void flight_control(void) { |
96 | void flight_control(void) { |
97 | // Mixer Fractions that are combined for Motor Control |
97 | // Mixer Fractions that are combined for Motor Control |
98 | int16_t term[4]; |
98 | int16_t term[4]; |
99 | 99 | ||
100 | // PID controller variables |
100 | // PID controller variables |
101 | int16_t PDPart[3]; |
101 | int16_t PDPart[3]; |
102 | 102 | ||
103 | static int8_t debugDataTimer = 1; |
103 | static int8_t debugDataTimer = 1; |
104 | 104 | ||
105 | // High resolution motor values for smoothing of PID motor outputs |
105 | // High resolution motor values for smoothing of PID motor outputs |
106 | // static int16_t outputFilters[MAX_OUTPUTS]; |
106 | // static int16_t outputFilters[MAX_OUTPUTS]; |
107 | 107 | ||
108 | uint8_t axis; |
108 | uint8_t axis; |
109 | 109 | ||
110 | setAirspeedPIDs(); |
110 | setAirspeedPIDs(); |
111 | 111 | ||
112 | term[CONTROL_THROTTLE] = controls[CONTROL_THROTTLE]; |
112 | term[CONTROL_THROTTLE] = controls[CONTROL_THROTTLE]; |
113 | 113 | ||
114 | // These params are just left the same in all modes. In MANUAL and RATE the results are ignored anyway. |
114 | // These params are just left the same in all modes. In MANUAL and RATE the results are ignored anyway. |
115 | int32_t tmp; |
115 | int32_t tmp; |
116 | 116 | ||
117 | tmp = ((int32_t)controls[CONTROL_ELEVATOR] * staticParams.stickIElevator) >> LOG_STICK_SCALE; |
117 | tmp = ((int32_t)controls[CONTROL_ELEVATOR] * staticParams.stickIElevator) >> LOG_STICK_SCALE; |
118 | if (reverse[PITCH]) target[PITCH] -= tmp; else target[PITCH] += tmp; |
118 | if (reverse[PITCH]) target[PITCH] += tmp; else target[PITCH] -= tmp; |
119 | 119 | ||
120 | tmp = ((int32_t)controls[CONTROL_AILERONS] * staticParams.stickIAilerons) >> LOG_STICK_SCALE; |
120 | tmp = ((int32_t)controls[CONTROL_AILERONS] * staticParams.stickIAilerons) >> LOG_STICK_SCALE; |
121 | if (reverse[ROLL]) target[ROLL] -= tmp; else target[ROLL] += tmp; |
121 | if (reverse[ROLL]) target[ROLL] += tmp; else target[ROLL] -= tmp; |
122 | 122 | ||
123 | tmp = ((int32_t)controls[CONTROL_RUDDER] * staticParams.stickIRudder) >> LOG_STICK_SCALE; |
123 | tmp = ((int32_t)controls[CONTROL_RUDDER] * staticParams.stickIRudder) >> LOG_STICK_SCALE; |
124 | if (reverse[YAW]) target[YAW] -= tmp; else target[YAW] += tmp; |
124 | if (reverse[YAW]) target[YAW] += tmp; else target[YAW] -= tmp; |
125 | 125 | ||
126 | for (axis = PITCH; axis <= YAW; axis++) { |
126 | for (axis = PITCH; axis <= YAW; axis++) { |
127 | if (target[axis] > OVER180) { |
127 | if (target[axis] > OVER180) { |
128 | target[axis] -= OVER360; |
128 | target[axis] -= OVER360; |
129 | } else if (target[axis] <= -OVER180) { |
129 | } else if (target[axis] <= -OVER180) { |
130 | target[axis] += OVER360; |
130 | target[axis] += OVER360; |
131 | } |
131 | } |
132 | 132 | ||
133 | //if (reverse[axis]) |
133 | //if (reverse[axis]) |
134 | error[axis] = attitude[axis] - target[axis]; |
134 | error[axis] = attitude[axis] - target[axis]; |
135 | // else |
135 | // else |
136 | // error[axis] = attitude[axis] - target[axis]; |
136 | // error[axis] = attitude[axis] - target[axis]; |
137 | 137 | ||
138 | if (error[axis] > maxError[axis]) { |
138 | if (error[axis] > maxError[axis]) { |
139 | error[axis] = maxError[axis]; |
139 | error[axis] = maxError[axis]; |
140 | } else if (error[axis] < -maxError[axis]) { |
140 | } else if (error[axis] < -maxError[axis]) { |
141 | error[axis] =- maxError[axis]; |
141 | error[axis] =- maxError[axis]; |
142 | } else { |
142 | } else { |
143 | // update I parts here for angles mode. Ĩ parts in rate mode is something different. |
143 | // update I parts here for angles mode. Ĩ parts in rate mode is something different. |
144 | } |
144 | } |
145 | 145 | ||
146 | /************************************************************************/ |
146 | /************************************************************************/ |
147 | /* Calculate control feedback from angle (gyro integral) */ |
147 | /* Calculate control feedback from angle (gyro integral) */ |
148 | /* and angular velocity (gyro signal) */ |
148 | /* and angular velocity (gyro signal) */ |
149 | /************************************************************************/ |
149 | /************************************************************************/ |
150 | if (currentFlightMode == FLIGHT_MODE_ANGLES || currentFlightMode == FLIGHT_MODE_RATE) { |
150 | if (currentFlightMode == FLIGHT_MODE_ANGLES || currentFlightMode == FLIGHT_MODE_RATE) { |
151 | PDPart[axis] = +(((int32_t) gyro_PID[axis] * (int32_t) airspeedPID[axis].P) >> LOG_P_SCALE) |
151 | PDPart[axis] = +(((int32_t) gyro_PID[axis] * (int32_t) airspeedPID[axis].P) >> LOG_P_SCALE) |
152 | + (((int16_t)gyroD[axis] * (int16_t) airspeedPID[axis].D) >> LOG_D_SCALE); |
152 | + (((int16_t)gyroD[axis] * (int16_t) airspeedPID[axis].D) >> LOG_D_SCALE); |
153 | //if (reverse[axis]) |
153 | //if (reverse[axis]) |
154 | // PDPart[axis] = -PDPart[axis]; |
154 | // PDPart[axis] = -PDPart[axis]; |
155 | } else { |
155 | } else { |
156 | PDPart[axis] = 0; |
156 | PDPart[axis] = 0; |
157 | } |
157 | } |
158 | 158 | ||
159 | if (currentFlightMode == FLIGHT_MODE_ANGLES) { |
159 | if (currentFlightMode == FLIGHT_MODE_ANGLES) { |
160 | int16_t anglePart = (int32_t)(error[axis] * (int32_t) airspeedPID[axis].I) >> LOG_I_SCALE; |
160 | int16_t anglePart = (int32_t)(error[axis] * (int32_t) airspeedPID[axis].I) >> LOG_I_SCALE; |
161 | // if (reverse[axis]) |
161 | // if (reverse[axis]) |
162 | PDPart[axis] += anglePart; |
162 | PDPart[axis] += anglePart; |
163 | // else |
163 | // else |
164 | // PDPart[axis] -= anglePart; |
164 | // PDPart[axis] -= anglePart; |
165 | } |
165 | } |
166 | 166 | ||
167 | // Add I parts here... these are integrated errors. |
167 | // Add I parts here... these are integrated errors. |
168 | if (reverse[axis]) |
168 | if (reverse[axis]) |
169 | term[axis] = controls[axis] - PDPart[axis]; // + IPart[axis]; |
169 | term[axis] = controls[axis] - PDPart[axis]; // + IPart[axis]; |
170 | else |
170 | else |
171 | term[axis] = controls[axis] + PDPart[axis]; // + IPart[axis]; |
171 | term[axis] = controls[axis] + PDPart[axis]; // + IPart[axis]; |
172 | } |
172 | } |
173 | 173 | ||
174 | debugOut.analog[12] = term[PITCH]; |
174 | debugOut.analog[12] = term[PITCH]; |
175 | debugOut.analog[13] = term[ROLL]; |
175 | debugOut.analog[13] = term[ROLL]; |
176 | debugOut.analog[14] = term[YAW]; |
176 | debugOut.analog[14] = term[YAW]; |
177 | debugOut.analog[15] = term[THROTTLE]; |
177 | debugOut.analog[15] = term[THROTTLE]; |
178 | 178 | ||
179 | for (uint8_t i = 0; i < NUM_CONTROL_SERVOS; i++) { |
179 | for (uint8_t i = 0; i < NUM_CONTROL_SERVOS; i++) { |
180 | int16_t tmp; |
180 | int16_t tmp; |
181 | if (servoTestActive) { |
181 | if (servoTestActive) { |
182 | controlServos[i] = ((int16_t) servoTest[i] - 128) * 8; |
182 | controlServos[i] = ((int16_t) servoTest[i] - 128) * 8; |
183 | } else { |
183 | } else { |
184 | // Follow the normal order of servos: Ailerons, elevator, throttle, rudder. |
184 | // Follow the normal order of servos: Ailerons, elevator, throttle, rudder. |
185 | switch (i) { |
185 | switch (i) { |
186 | case 0: |
186 | case 0: |
187 | tmp = term[ROLL]; |
187 | tmp = term[ROLL]; |
188 | break; |
188 | break; |
189 | case 1: |
189 | case 1: |
190 | tmp = term[PITCH]; |
190 | tmp = term[PITCH]; |
191 | break; |
191 | break; |
192 | case 2: |
192 | case 2: |
193 | tmp = term[THROTTLE]; |
193 | tmp = term[THROTTLE]; |
194 | break; |
194 | break; |
195 | case 3: |
195 | case 3: |
196 | tmp = term[YAW]; |
196 | tmp = term[YAW]; |
197 | break; |
197 | break; |
198 | default: |
198 | default: |
199 | tmp = 0; |
199 | tmp = 0; |
200 | } |
200 | } |
201 | // These are all signed and in the same units as the RC stuff in rc.c. |
201 | // These are all signed and in the same units as the RC stuff in rc.c. |
202 | controlServos[i] = tmp; |
202 | controlServos[i] = tmp; |
203 | } |
203 | } |
204 | } |
204 | } |
205 | 205 | ||
206 | calculateControlServoValues(); |
206 | calculateControlServoValues(); |
207 | 207 | ||
208 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
208 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
209 | // Debugging |
209 | // Debugging |
210 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
210 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
211 | if (!(--debugDataTimer)) { |
211 | if (!(--debugDataTimer)) { |
212 | debugDataTimer = 24; // update debug outputs at 488 / 24 = 20.3 Hz. |
212 | debugDataTimer = 24; // update debug outputs at 488 / 24 = 20.3 Hz. |
213 | debugOut.analog[0] = gyro_PID[PITCH]; // in 0.1 deg |
213 | debugOut.analog[0] = gyro_PID[PITCH]; // in 0.1 deg |
214 | debugOut.analog[1] = gyro_PID[ROLL]; // in 0.1 deg |
214 | debugOut.analog[1] = gyro_PID[ROLL]; // in 0.1 deg |
215 | debugOut.analog[2] = gyro_PID[YAW]; |
215 | debugOut.analog[2] = gyro_PID[YAW]; |
216 | 216 | ||
217 | debugOut.analog[3] = attitude[PITCH] / (GYRO_DEG_FACTOR / 10); // in 0.1 deg |
217 | debugOut.analog[3] = attitude[PITCH] / (GYRO_DEG_FACTOR / 10); // in 0.1 deg |
218 | debugOut.analog[4] = attitude[ROLL] / (GYRO_DEG_FACTOR / 10); // in 0.1 deg |
218 | debugOut.analog[4] = attitude[ROLL] / (GYRO_DEG_FACTOR / 10); // in 0.1 deg |
219 | debugOut.analog[5] = attitude[YAW] / (GYRO_DEG_FACTOR / 10); |
219 | debugOut.analog[5] = attitude[YAW] / (GYRO_DEG_FACTOR / 10); |
220 | 220 | ||
221 | debugOut.analog[6] = target[PITCH] / (GYRO_DEG_FACTOR / 10); // in 0.1 deg |
221 | debugOut.analog[6] = target[PITCH] / (GYRO_DEG_FACTOR / 10); // in 0.1 deg |
222 | debugOut.analog[7] = target[ROLL] / (GYRO_DEG_FACTOR / 10); // in 0.1 deg |
222 | debugOut.analog[7] = target[ROLL] / (GYRO_DEG_FACTOR / 10); // in 0.1 deg |
223 | debugOut.analog[8] = target[YAW] / (GYRO_DEG_FACTOR / 10); |
223 | debugOut.analog[8] = target[YAW] / (GYRO_DEG_FACTOR / 10); |
224 | 224 | ||
225 | debugOut.analog[9] = error[PITCH] / (GYRO_DEG_FACTOR / 10); // in 0.1 deg |
225 | debugOut.analog[9] = error[PITCH] / (GYRO_DEG_FACTOR / 10); // in 0.1 deg |
226 | debugOut.analog[10] = error[ROLL] / (GYRO_DEG_FACTOR / 10); // in 0.1 deg |
226 | debugOut.analog[10] = error[ROLL] / (GYRO_DEG_FACTOR / 10); // in 0.1 deg |
227 | debugOut.analog[11] = error[YAW] / (GYRO_DEG_FACTOR / 10); |
227 | debugOut.analog[11] = error[YAW] / (GYRO_DEG_FACTOR / 10); |
228 | 228 | ||
229 | debugOut.analog[12] = term[PITCH]; |
229 | debugOut.analog[12] = term[PITCH]; |
230 | debugOut.analog[13] = term[ROLL]; |
230 | debugOut.analog[13] = term[ROLL]; |
231 | debugOut.analog[14] = term[YAW]; |
231 | debugOut.analog[14] = term[YAW]; |
232 | 232 | ||
233 | //DebugOut.Analog[18] = (10 * controlIntegrals[CONTROL_ELEVATOR]) / GYRO_DEG_FACTOR_PITCHROLL; // in 0.1 deg |
233 | //DebugOut.Analog[18] = (10 * controlIntegrals[CONTROL_ELEVATOR]) / GYRO_DEG_FACTOR_PITCHROLL; // in 0.1 deg |
234 | //DebugOut.Analog[19] = (10 * controlIntegrals[CONTROL_AILERONS]) / GYRO_DEG_FACTOR_PITCHROLL; // in 0.1 deg |
234 | //DebugOut.Analog[19] = (10 * controlIntegrals[CONTROL_AILERONS]) / GYRO_DEG_FACTOR_PITCHROLL; // in 0.1 deg |
235 | //debugOut.analog[22] = (10 * IPart[PITCH]) / GYRO_DEG_FACTOR; // in 0.1 deg |
235 | //debugOut.analog[22] = (10 * IPart[PITCH]) / GYRO_DEG_FACTOR; // in 0.1 deg |
236 | //debugOut.analog[23] = (10 * IPart[ROLL]) / GYRO_DEG_FACTOR; // in 0.1 deg |
236 | //debugOut.analog[23] = (10 * IPart[ROLL]) / GYRO_DEG_FACTOR; // in 0.1 deg |
237 | } |
237 | } |
238 | } |
238 | } |
239 | 239 |