Rev 1566 | Rev 1591 | Go to most recent revision | Only display areas with differences | Regard whitespace | Details | Blame | Last modification | View Log | RSS feed
Rev 1566 | Rev 1571 | ||
---|---|---|---|
1 | #-------------------------------------------------------------------- |
1 | #-------------------------------------------------------------------- |
2 | # MCU name |
2 | # MCU name |
3 | #MCU = atmega1284p |
3 | #MCU = atmega1284p |
4 | MCU = atmega644p |
4 | MCU = atmega644p |
5 | F_CPU = 20000000 |
5 | F_CPU = 20000000 |
6 | #------------------------------------------------------------------- |
6 | #------------------------------------------------------------------- |
7 | VERSION_MAJOR = 0 |
7 | VERSION_MAJOR = 0 |
8 | VERSION_MINOR = 78 |
8 | VERSION_MINOR = 78 |
9 | VERSION_PATCH = 2 |
9 | VERSION_PATCH = 2 |
10 | 10 | ||
11 | VERSION_SERIAL_MAJOR = 11 # Serial Protocol |
11 | VERSION_SERIAL_MAJOR = 11 # Serial Protocol |
12 | VERSION_SERIAL_MINOR = 0 # Serial Protocol |
12 | VERSION_SERIAL_MINOR = 0 # Serial Protocol |
13 | NC_SPI_COMPATIBLE = 12 # Navi-Kompatibilität |
13 | NC_SPI_COMPATIBLE = 12 # Navi-Kompatibilität |
14 | #------------------------------------------------------------------- |
14 | #------------------------------------------------------------------- |
15 | 15 | ||
16 | # get SVN revision |
16 | # get SVN revision |
17 | REV := $(shell sh -c "cat .svn/entries | sed -n '4p'") |
17 | REV := $(shell sh -c "cat .svn/entries | sed -n '4p'") |
18 | 18 | ||
19 | ifeq ($(MCU), atmega1284p) |
19 | ifeq ($(MCU), atmega1284p) |
20 | FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
20 | FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
21 | HEX_NAME = MEGA1284P |
21 | HEX_NAME = MEGA1284P |
- | 22 | LIBFC_EXT = 1284 |
|
22 | endif |
23 | endif |
23 | 24 | ||
24 | ifeq ($(MCU), atmega644p) |
25 | ifeq ($(MCU), atmega644p) |
25 | FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
26 | FUSE_SETTINGS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
26 | HEX_NAME = MEGA644 |
27 | HEX_NAME = MEGA644 |
- | 28 | LIBFC_EXT = 644 |
|
27 | endif |
29 | endif |
28 | 30 | ||
29 | ifeq ($(F_CPU), 16000000) |
31 | ifeq ($(F_CPU), 16000000) |
30 | QUARZ = 16MHZ |
32 | QUARZ = 16MHZ |
31 | endif |
33 | endif |
32 | 34 | ||
33 | ifeq ($(F_CPU), 20000000) |
35 | ifeq ($(F_CPU), 20000000) |
34 | QUARZ = 20MHZ |
36 | QUARZ = 20MHZ |
35 | endif |
37 | endif |
36 | 38 | ||
37 | 39 | ||
38 | # Output format. (can be srec, ihex, binary) |
40 | # Output format. (can be srec, ihex, binary) |
39 | FORMAT = ihex |
41 | FORMAT = ihex |
40 | 42 | ||
41 | # Target file name (without extension). |
43 | # Target file name (without extension). |
42 | 44 | ||
43 | ifeq ($(VERSION_PATCH), 0) |
45 | ifeq ($(VERSION_PATCH), 0) |
44 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)a_SVN$(REV) |
46 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)a_SVN$(REV) |
45 | endif |
47 | endif |
46 | ifeq ($(VERSION_PATCH), 1) |
48 | ifeq ($(VERSION_PATCH), 1) |
47 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)b_SVN$(REV) |
49 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)b_SVN$(REV) |
48 | endif |
50 | endif |
49 | ifeq ($(VERSION_PATCH), 2) |
51 | ifeq ($(VERSION_PATCH), 2) |
50 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)c_SVN$(REV) |
52 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)c_SVN$(REV) |
51 | endif |
53 | endif |
52 | ifeq ($(VERSION_PATCH), 3) |
54 | ifeq ($(VERSION_PATCH), 3) |
53 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)d_SVN$(REV) |
55 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)d_SVN$(REV) |
54 | endif |
56 | endif |
55 | ifeq ($(VERSION_PATCH), 4) |
57 | ifeq ($(VERSION_PATCH), 4) |
56 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)e_SVN$(REV) |
58 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)e_SVN$(REV) |
57 | endif |
59 | endif |
58 | ifeq ($(VERSION_PATCH), 5) |
60 | ifeq ($(VERSION_PATCH), 5) |
59 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)f_SVN$(REV) |
61 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)f_SVN$(REV) |
60 | endif |
62 | endif |
61 | ifeq ($(VERSION_PATCH), 6) |
63 | ifeq ($(VERSION_PATCH), 6) |
62 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)g_SVN$(REV) |
64 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)g_SVN$(REV) |
63 | endif |
65 | endif |
64 | ifeq ($(VERSION_PATCH), 7) |
66 | ifeq ($(VERSION_PATCH), 7) |
65 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)h_SVN$(REV) |
67 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)h_SVN$(REV) |
66 | endif |
68 | endif |
67 | ifeq ($(VERSION_PATCH), 8) |
69 | ifeq ($(VERSION_PATCH), 8) |
68 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)i_SVN$(REV) |
70 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)i_SVN$(REV) |
69 | endif |
71 | endif |
70 | ifeq ($(VERSION_PATCH), 9) |
72 | ifeq ($(VERSION_PATCH), 9) |
71 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)j_SVN$(REV) |
73 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)j_SVN$(REV) |
72 | endif |
74 | endif |
73 | ifeq ($(VERSION_PATCH), 10) |
75 | ifeq ($(VERSION_PATCH), 10) |
74 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)k_SVN$(REV) |
76 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)k_SVN$(REV) |
75 | endif |
77 | endif |
76 | ifeq ($(VERSION_PATCH), 11) |
78 | ifeq ($(VERSION_PATCH), 11) |
77 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)L_SVN$(REV) |
79 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)L_SVN$(REV) |
78 | endif |
80 | endif |
79 | ifeq ($(VERSION_PATCH), 12) |
81 | ifeq ($(VERSION_PATCH), 12) |
80 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)m_SVN$(REV) |
82 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)m_SVN$(REV) |
81 | endif |
83 | endif |
82 | ifeq ($(VERSION_PATCH), 13) |
84 | ifeq ($(VERSION_PATCH), 13) |
83 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)n_SVN$(REV) |
85 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)n_SVN$(REV) |
84 | endif |
86 | endif |
85 | ifeq ($(VERSION_PATCH), 14) |
87 | ifeq ($(VERSION_PATCH), 14) |
86 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)o_SVN$(REV) |
88 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)o_SVN$(REV) |
87 | endif |
89 | endif |
88 | ifeq ($(VERSION_PATCH), 15) |
90 | ifeq ($(VERSION_PATCH), 15) |
89 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)p_SVN$(REV) |
91 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)p_SVN$(REV) |
90 | endif |
92 | endif |
91 | ifeq ($(VERSION_PATCH), 16) |
93 | ifeq ($(VERSION_PATCH), 16) |
92 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)q_SVN$(REV) |
94 | TARGET = Flight-Ctrl_$(HEX_NAME)_V$(VERSION_MAJOR)_$(VERSION_MINOR)q_SVN$(REV) |
93 | endif |
95 | endif |
94 | 96 | ||
95 | 97 | ||
96 | # Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization. |
98 | # Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization. |
97 | # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
99 | # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
98 | OPT = s |
100 | OPT = s |
99 | #OPT = 2 |
101 | #OPT = 2 |
100 | 102 | ||
101 | ########################################################################################################## |
103 | ########################################################################################################## |
102 | # List C source files here. (C dependencies are automatically generated.) |
104 | # List C source files here. (C dependencies are automatically generated.) |
103 | SRC = main.c uart.c timer0.c analog.c menu.c |
105 | SRC = main.c uart.c timer0.c analog.c menu.c |
104 | SRC += twimaster.c rc.c fc.c GPS.c spi.c led.c Spektrum.c |
106 | SRC += twimaster.c rc.c fc.c GPS.c spi.c led.c Spektrum.c |
105 | SRC += mymath.c jetimenu.c capacity.c |
107 | SRC += mymath.c jetimenu.c capacity.c |
106 | 108 | ||
107 | ########################################################################################################## |
109 | ########################################################################################################## |
108 | 110 | ||
109 | 111 | ||
110 | # List Assembler source files here. |
112 | # List Assembler source files here. |
111 | # Make them always end in a capital .S. Files ending in a lowercase .s |
113 | # Make them always end in a capital .S. Files ending in a lowercase .s |
112 | # will not be considered source files but generated files (assembler |
114 | # will not be considered source files but generated files (assembler |
113 | # output from the compiler), and will be deleted upon "make clean"! |
115 | # output from the compiler), and will be deleted upon "make clean"! |
114 | # Even though the DOS/Win* filesystem matches both .s and .S the same, |
116 | # Even though the DOS/Win* filesystem matches both .s and .S the same, |
115 | # it will preserve the spelling of the filenames, and gcc itself does |
117 | # it will preserve the spelling of the filenames, and gcc itself does |
116 | # care about how the name is spelled on its command-line. |
118 | # care about how the name is spelled on its command-line. |
117 | ASRC = isqrt.S |
119 | ASRC = isqrt.S |
118 | 120 | ||
119 | 121 | ||
120 | 122 | ||
121 | # List any extra directories to look for include files here. |
123 | # List any extra directories to look for include files here. |
122 | # Each directory must be seperated by a space. |
124 | # Each directory must be seperated by a space. |
123 | EXTRAINCDIRS = |
125 | EXTRAINCDIRS = |
124 | 126 | ||
125 | 127 | ||
126 | # Optional compiler flags. |
128 | # Optional compiler flags. |
127 | # -g: generate debugging information (for GDB, or for COFF conversion) |
129 | # -g: generate debugging information (for GDB, or for COFF conversion) |
128 | # -O*: optimization level |
130 | # -O*: optimization level |
129 | # -f...: tuning, see gcc manual and avr-libc documentation |
131 | # -f...: tuning, see gcc manual and avr-libc documentation |
130 | # -Wall...: warning level |
132 | # -Wall...: warning level |
131 | # -Wa,...: tell GCC to pass this to the assembler. |
133 | # -Wa,...: tell GCC to pass this to the assembler. |
132 | # -ahlms: create assembler listing |
134 | # -ahlms: create assembler listing |
133 | CFLAGS = -O$(OPT) -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-adhlns=$(<:%.c=%.lst) $(patsubst %,-I%,$(EXTRAINCDIRS)) |
135 | CFLAGS = -O$(OPT) -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-adhlns=$(<:%.c=%.lst) $(patsubst %,-I%,$(EXTRAINCDIRS)) |
134 | 136 | ||
135 | 137 | ||
136 | # Set a "language standard" compiler flag. |
138 | # Set a "language standard" compiler flag. |
137 | # Unremark just one line below to set the language standard to use. |
139 | # Unremark just one line below to set the language standard to use. |
138 | # gnu99 = C99 + GNU extensions. See GCC manual for more information. |
140 | # gnu99 = C99 + GNU extensions. See GCC manual for more information. |
139 | #CFLAGS += -std=c89 |
141 | #CFLAGS += -std=c89 |
140 | #CFLAGS += -std=gnu89 |
142 | #CFLAGS += -std=gnu89 |
141 | #CFLAGS += -std=c99 |
143 | #CFLAGS += -std=c99 |
142 | CFLAGS += -std=gnu99 |
144 | CFLAGS += -std=gnu99 |
143 | 145 | ||
144 | # shrink code size |
146 | # shrink code size |
145 | CFLAGS += -mtiny-stack |
147 | CFLAGS += -mtiny-stack |
146 | #CFLAGS += -fno-inline-functions |
148 | #CFLAGS += -fno-inline-functions |
147 | CFLAGS += -mcall-prologues |
149 | CFLAGS += -mcall-prologues |
148 | 150 | ||
149 | CFLAGS += -DF_CPU=$(F_CPU) -DVERSION_MAJOR=$(VERSION_MAJOR) -DVERSION_MINOR=$(VERSION_MINOR) -DVERSION_PATCH=$(VERSION_PATCH) -DVERSION_SERIAL_MAJOR=$(VERSION_SERIAL_MAJOR) -DVERSION_SERIAL_MINOR=$(VERSION_SERIAL_MINOR) -DNC_SPI_COMPATIBLE=$(NC_SPI_COMPATIBLE) |
151 | CFLAGS += -DF_CPU=$(F_CPU) -DVERSION_MAJOR=$(VERSION_MAJOR) -DVERSION_MINOR=$(VERSION_MINOR) -DVERSION_PATCH=$(VERSION_PATCH) -DVERSION_SERIAL_MAJOR=$(VERSION_SERIAL_MAJOR) -DVERSION_SERIAL_MINOR=$(VERSION_SERIAL_MINOR) -DNC_SPI_COMPATIBLE=$(NC_SPI_COMPATIBLE) |
150 | 152 | ||
151 | 153 | ||
152 | # Optional assembler flags. |
154 | # Optional assembler flags. |
153 | # -Wa,...: tell GCC to pass this to the assembler. |
155 | # -Wa,...: tell GCC to pass this to the assembler. |
154 | # -ahlms: create listing |
156 | # -ahlms: create listing |
155 | # -gstabs: have the assembler create line number information; note that |
157 | # -gstabs: have the assembler create line number information; note that |
156 | # for use in COFF files, additional information about filenames |
158 | # for use in COFF files, additional information about filenames |
157 | # and function names needs to be present in the assembler source |
159 | # and function names needs to be present in the assembler source |
158 | # files -- see avr-libc docs [FIXME: not yet described there] |
160 | # files -- see avr-libc docs [FIXME: not yet described there] |
159 | ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs |
161 | ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs |
160 | 162 | ||
161 | 163 | ||
162 | 164 | ||
163 | # Optional linker flags. |
165 | # Optional linker flags. |
164 | # -Wl,...: tell GCC to pass this to linker. |
166 | # -Wl,...: tell GCC to pass this to linker. |
165 | # -Map: create map file |
167 | # -Map: create map file |
166 | # --cref: add cross reference to map file |
168 | # --cref: add cross reference to map file |
167 | LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
169 | LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
168 | 170 | ||
169 | # Additional libraries |
171 | # Additional libraries |
170 | 172 | ||
171 | # Minimalistic printf version |
173 | # Minimalistic printf version |
172 | #LDFLAGS += -Wl,-u,vfprintf -lprintf_min |
174 | #LDFLAGS += -Wl,-u,vfprintf -lprintf_min |
173 | 175 | ||
174 | # Floating point printf version (requires -lm below) |
176 | # Floating point printf version (requires -lm below) |
175 | #LDFLAGS += -Wl,-u,vfprintf -lprintf_flt |
177 | #LDFLAGS += -Wl,-u,vfprintf -lprintf_flt |
176 | 178 | ||
177 | # -lm = math library |
179 | # -lm = math library |
178 | LDFLAGS += -lm |
180 | LDFLAGS += -lm |
179 | 181 | ||
180 | LDFLAGS += libfc.a |
182 | LDFLAGS += libfc$(LIBFC_EXT).a |
181 | 183 | ||
182 | ##LDFLAGS += -T./linkerfile/avr5.x |
184 | ##LDFLAGS += -T./linkerfile/avr5.x |
183 | 185 | ||
184 | 186 | ||
185 | 187 | ||
186 | # Programming support using avrdude. Settings and variables. |
188 | # Programming support using avrdude. Settings and variables. |
187 | 189 | ||
188 | # Programming hardware: alf avr910 avrisp bascom bsd |
190 | # Programming hardware: alf avr910 avrisp bascom bsd |
189 | # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 |
191 | # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 |
190 | # |
192 | # |
191 | # Type: avrdude -c ? |
193 | # Type: avrdude -c ? |
192 | # to get a full listing. |
194 | # to get a full listing. |
193 | # |
195 | # |
194 | #AVRDUDE_PROGRAMMER = dt006 |
196 | #AVRDUDE_PROGRAMMER = dt006 |
195 | #AVRDUDE_PROGRAMMER = stk200 |
197 | #AVRDUDE_PROGRAMMER = stk200 |
196 | #AVRDUDE_PROGRAMMER = ponyser |
198 | #AVRDUDE_PROGRAMMER = ponyser |
197 | AVRDUDE_PROGRAMMER = avrispv2 |
199 | AVRDUDE_PROGRAMMER = avrispv2 |
198 | #falls Ponyser ausgewählt wird, muss sich unsere avrdude-Configdatei im Bin-Verzeichnis des Compilers befinden |
200 | #falls Ponyser ausgewählt wird, muss sich unsere avrdude-Configdatei im Bin-Verzeichnis des Compilers befinden |
199 | 201 | ||
200 | #AVRDUDE_PORT = com1 # programmer connected to serial device |
202 | #AVRDUDE_PORT = com1 # programmer connected to serial device |
201 | #AVRDUDE_PORT = lpt1 # programmer connected to parallel port |
203 | #AVRDUDE_PORT = lpt1 # programmer connected to parallel port |
202 | AVRDUDE_PORT = usb # programmer connected to USB |
204 | AVRDUDE_PORT = usb # programmer connected to USB |
203 | 205 | ||
204 | #AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
206 | #AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
205 | AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex $(FUSE_SETTINGS) |
207 | AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex $(FUSE_SETTINGS) |
206 | #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
208 | #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
207 | 209 | ||
208 | #avrdude -c avrispv2 -P usb -p m32 -U flash:w:blink.hex |
210 | #avrdude -c avrispv2 -P usb -p m32 -U flash:w:blink.hex |
209 | AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
211 | AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
210 | 212 | ||
211 | # Uncomment the following if you want avrdude's erase cycle counter. |
213 | # Uncomment the following if you want avrdude's erase cycle counter. |
212 | # Note that this counter needs to be initialized first using -Yn, |
214 | # Note that this counter needs to be initialized first using -Yn, |
213 | # see avrdude manual. |
215 | # see avrdude manual. |
214 | #AVRDUDE_ERASE += -y |
216 | #AVRDUDE_ERASE += -y |
215 | 217 | ||
216 | # Uncomment the following if you do /not/ wish a verification to be |
218 | # Uncomment the following if you do /not/ wish a verification to be |
217 | # performed after programming the device. |
219 | # performed after programming the device. |
218 | AVRDUDE_FLAGS += -V |
220 | AVRDUDE_FLAGS += -V |
219 | 221 | ||
220 | # Increase verbosity level. Please use this when submitting bug |
222 | # Increase verbosity level. Please use this when submitting bug |
221 | # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
223 | # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
222 | # to submit bug reports. |
224 | # to submit bug reports. |
223 | #AVRDUDE_FLAGS += -v -v |
225 | #AVRDUDE_FLAGS += -v -v |
224 | 226 | ||
225 | # --------------------------------------------------------------------------- |
227 | # --------------------------------------------------------------------------- |
226 | # Define directories, if needed. |
228 | # Define directories, if needed. |
227 | DIRAVR = c:/winavr |
229 | DIRAVR = c:/winavr |
228 | DIRAVRBIN = $(DIRAVR)/bin |
230 | DIRAVRBIN = $(DIRAVR)/bin |
229 | DIRAVRUTILS = $(DIRAVR)/utils/bin |
231 | DIRAVRUTILS = $(DIRAVR)/utils/bin |
230 | DIRINC = . |
232 | DIRINC = . |
231 | DIRLIB = $(DIRAVR)/avr/lib |
233 | DIRLIB = $(DIRAVR)/avr/lib |
232 | 234 | ||
233 | 235 | ||
234 | # Define programs and commands. |
236 | # Define programs and commands. |
235 | SHELL = sh |
237 | SHELL = sh |
236 | 238 | ||
237 | CC = avr-gcc |
239 | CC = avr-gcc |
238 | 240 | ||
239 | OBJCOPY = avr-objcopy |
241 | OBJCOPY = avr-objcopy |
240 | OBJDUMP = avr-objdump |
242 | OBJDUMP = avr-objdump |
241 | SIZE = avr-size |
243 | SIZE = avr-size |
242 | 244 | ||
243 | # Programming support using avrdude. |
245 | # Programming support using avrdude. |
244 | AVRDUDE = avrdude |
246 | AVRDUDE = avrdude |
245 | 247 | ||
246 | REMOVE = rm -f |
248 | REMOVE = rm -f |
247 | COPY = cp |
249 | COPY = cp |
248 | 250 | ||
249 | HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
251 | HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
250 | ELFSIZE = $(SIZE) -A $(TARGET).elf |
252 | ELFSIZE = $(SIZE) -A $(TARGET).elf |
251 | LIMITS = $(SIZE) --mcu=$(MCU) -C $(TARGET).elf |
253 | LIMITS = $(SIZE) --mcu=$(MCU) -C $(TARGET).elf |
252 | 254 | ||
253 | 255 | ||
254 | # Define Messages |
256 | # Define Messages |
255 | # English |
257 | # English |
256 | MSG_ERRORS_NONE = Errors: none |
258 | MSG_ERRORS_NONE = Errors: none |
257 | MSG_BEGIN = -------- begin -------- |
259 | MSG_BEGIN = -------- begin -------- |
258 | MSG_END = -------- end -------- |
260 | MSG_END = -------- end -------- |
259 | MSG_SIZE_BEFORE = Size before: |
261 | MSG_SIZE_BEFORE = Size before: |
260 | MSG_SIZE_AFTER = Size after: |
262 | MSG_SIZE_AFTER = Size after: |
261 | MSG_COFF = Converting to AVR COFF: |
263 | MSG_COFF = Converting to AVR COFF: |
262 | MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
264 | MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
263 | MSG_FLASH = Creating load file for Flash: |
265 | MSG_FLASH = Creating load file for Flash: |
264 | MSG_EEPROM = Creating load file for EEPROM: |
266 | MSG_EEPROM = Creating load file for EEPROM: |
265 | MSG_EXTENDED_LISTING = Creating Extended Listing: |
267 | MSG_EXTENDED_LISTING = Creating Extended Listing: |
266 | MSG_SYMBOL_TABLE = Creating Symbol Table: |
268 | MSG_SYMBOL_TABLE = Creating Symbol Table: |
267 | MSG_LINKING = Linking: |
269 | MSG_LINKING = Linking: |
268 | MSG_COMPILING = Compiling: |
270 | MSG_COMPILING = Compiling: |
269 | MSG_ASSEMBLING = Assembling: |
271 | MSG_ASSEMBLING = Assembling: |
270 | MSG_CLEANING = Cleaning project: |
272 | MSG_CLEANING = Cleaning project: |
271 | 273 | ||
272 | 274 | ||
273 | # Define all object files. |
275 | # Define all object files. |
274 | OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) |
276 | OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) |
275 | 277 | ||
276 | # Define all listing files. |
278 | # Define all listing files. |
277 | LST = $(ASRC:.S=.lst) $(SRC:.c=.lst) |
279 | LST = $(ASRC:.S=.lst) $(SRC:.c=.lst) |
278 | 280 | ||
279 | # Combine all necessary flags and optional flags. |
281 | # Combine all necessary flags and optional flags. |
280 | # Add target processor to flags. |
282 | # Add target processor to flags. |
281 | #ALL_CFLAGS = -mmcu=$(MCU) -DF_CPU=$(F_CPU) -I. $(CFLAGS) |
283 | #ALL_CFLAGS = -mmcu=$(MCU) -DF_CPU=$(F_CPU) -I. $(CFLAGS) |
282 | ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) |
284 | ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) |
283 | ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
285 | ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
284 | 286 | ||
285 | 287 | ||
286 | # Default target. |
288 | # Default target. |
287 | all: begin gccversion sizebefore $(TARGET).elf $(TARGET).hex sizeafter finished end |
289 | all: begin gccversion sizebefore $(TARGET).elf $(TARGET).hex sizeafter finished end |
288 | 290 | ||
289 | 291 | ||
290 | # Eye candy. |
292 | # Eye candy. |
291 | # AVR Studio 3.x does not check make's exit code but relies on |
293 | # AVR Studio 3.x does not check make's exit code but relies on |
292 | # the following magic strings to be generated by the compile job. |
294 | # the following magic strings to be generated by the compile job. |
293 | begin: |
295 | begin: |
294 | @echo |
296 | @echo |
295 | @echo $(MSG_BEGIN) |
297 | @echo $(MSG_BEGIN) |
296 | 298 | ||
297 | finished: |
299 | finished: |
298 | @echo $(MSG_ERRORS_NONE) |
300 | @echo $(MSG_ERRORS_NONE) |
299 | 301 | ||
300 | end: |
302 | end: |
301 | @echo $(MSG_END) |
303 | @echo $(MSG_END) |
302 | @echo |
304 | @echo |
303 | 305 | ||
304 | 306 | ||
305 | # Display size of file. |
307 | # Display size of file. |
306 | sizebefore: |
308 | sizebefore: |
307 | @if [ -f $(TARGET).elf ]; then echo Size before:; $(ELFSIZE); $(HEXSIZE); $(LIMITS); echo; fi |
309 | @if [ -f $(TARGET).elf ]; then echo Size before:; $(ELFSIZE); $(HEXSIZE); $(LIMITS); echo; fi |
308 | sizeafter: |
310 | sizeafter: |
309 | @if [ -f $(TARGET).elf ]; then echo Size after:; $(ELFSIZE); $(HEXSIZE); $(LIMITS); echo; fi |
311 | @if [ -f $(TARGET).elf ]; then echo Size after:; $(ELFSIZE); $(HEXSIZE); $(LIMITS); echo; fi |
310 | 312 | ||
311 | 313 | ||
312 | # Display compiler version information. |
314 | # Display compiler version information. |
313 | gccversion : |
315 | gccversion : |
314 | @$(CC) --version |
316 | @$(CC) --version |
315 | 317 | ||
316 | 318 | ||
317 | # Convert ELF to COFF for use in debugging / simulating in |
319 | # Convert ELF to COFF for use in debugging / simulating in |
318 | # AVR Studio or VMLAB. |
320 | # AVR Studio or VMLAB. |
319 | COFFCONVERT=$(OBJCOPY) --debugging \ |
321 | COFFCONVERT=$(OBJCOPY) --debugging \ |
320 | --change-section-address .data-0x800000 \ |
322 | --change-section-address .data-0x800000 \ |
321 | --change-section-address .bss-0x800000 \ |
323 | --change-section-address .bss-0x800000 \ |
322 | --change-section-address .noinit-0x800000 \ |
324 | --change-section-address .noinit-0x800000 \ |
323 | --change-section-address .eeprom-0x810000 |
325 | --change-section-address .eeprom-0x810000 |
324 | 326 | ||
325 | 327 | ||
326 | coff: $(TARGET).elf |
328 | coff: $(TARGET).elf |
327 | @echo |
329 | @echo |
328 | @echo $(MSG_COFF) $(TARGET).cof |
330 | @echo $(MSG_COFF) $(TARGET).cof |
329 | $(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
331 | $(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
330 | 332 | ||
331 | 333 | ||
332 | extcoff: $(TARGET).elf |
334 | extcoff: $(TARGET).elf |
333 | @echo |
335 | @echo |
334 | @echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
336 | @echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
335 | $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
337 | $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
336 | 338 | ||
337 | 339 | ||
338 | 340 | ||
339 | 341 | ||
340 | # Program the device. |
342 | # Program the device. |
341 | program: $(TARGET).hex $(TARGET).eep |
343 | program: $(TARGET).hex $(TARGET).eep |
342 | $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
344 | $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
343 | 345 | ||
344 | 346 | ||
345 | 347 | ||
346 | 348 | ||
347 | # Create final output files (.hex, .eep) from ELF output file. |
349 | # Create final output files (.hex, .eep) from ELF output file. |
348 | %.hex: %.elf |
350 | %.hex: %.elf |
349 | @echo |
351 | @echo |
350 | @echo $(MSG_FLASH) $@ |
352 | @echo $(MSG_FLASH) $@ |
351 | $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ |
353 | $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ |
352 | 354 | ||
353 | %.eep: %.elf |
355 | %.eep: %.elf |
354 | @echo |
356 | @echo |
355 | @echo $(MSG_EEPROM) $@ |
357 | @echo $(MSG_EEPROM) $@ |
356 | -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
358 | -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
357 | --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ |
359 | --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ |
358 | 360 | ||
359 | # Create extended listing file from ELF output file. |
361 | # Create extended listing file from ELF output file. |
360 | %.lss: %.elf |
362 | %.lss: %.elf |
361 | @echo |
363 | @echo |
362 | @echo $(MSG_EXTENDED_LISTING) $@ |
364 | @echo $(MSG_EXTENDED_LISTING) $@ |
363 | $(OBJDUMP) -h -S $< > $@ |
365 | $(OBJDUMP) -h -S $< > $@ |
364 | 366 | ||
365 | # Create a symbol table from ELF output file. |
367 | # Create a symbol table from ELF output file. |
366 | %.sym: %.elf |
368 | %.sym: %.elf |
367 | @echo |
369 | @echo |
368 | @echo $(MSG_SYMBOL_TABLE) $@ |
370 | @echo $(MSG_SYMBOL_TABLE) $@ |
369 | avr-nm -n $< > $@ |
371 | avr-nm -n $< > $@ |
370 | 372 | ||
371 | 373 | ||
372 | 374 | ||
373 | # Link: create ELF output file from object files. |
375 | # Link: create ELF output file from object files. |
374 | .SECONDARY : $(TARGET).elf |
376 | .SECONDARY : $(TARGET).elf |
375 | .PRECIOUS : $(OBJ) |
377 | .PRECIOUS : $(OBJ) |
376 | %.elf: $(OBJ) |
378 | %.elf: $(OBJ) |
377 | @echo |
379 | @echo |
378 | @echo $(MSG_LINKING) $@ |
380 | @echo $(MSG_LINKING) $@ |
379 | $(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) |
381 | $(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) |
380 | 382 | ||
381 | 383 | ||
382 | # Compile: create object files from C source files. |
384 | # Compile: create object files from C source files. |
383 | %.o : %.c |
385 | %.o : %.c |
384 | @echo |
386 | @echo |
385 | @echo $(MSG_COMPILING) $< |
387 | @echo $(MSG_COMPILING) $< |
386 | $(CC) -c $(ALL_CFLAGS) $< -o $@ |
388 | $(CC) -c $(ALL_CFLAGS) $< -o $@ |
387 | 389 | ||
388 | 390 | ||
389 | # Compile: create assembler files from C source files. |
391 | # Compile: create assembler files from C source files. |
390 | %.s : %.c |
392 | %.s : %.c |
391 | $(CC) -S $(ALL_CFLAGS) $< -o $@ |
393 | $(CC) -S $(ALL_CFLAGS) $< -o $@ |
392 | 394 | ||
393 | 395 | ||
394 | # Assemble: create object files from assembler source files. |
396 | # Assemble: create object files from assembler source files. |
395 | %.o : %.S |
397 | %.o : %.S |
396 | @echo |
398 | @echo |
397 | @echo $(MSG_ASSEMBLING) $< |
399 | @echo $(MSG_ASSEMBLING) $< |
398 | $(CC) -c $(ALL_ASFLAGS) $< -o $@ |
400 | $(CC) -c $(ALL_ASFLAGS) $< -o $@ |
399 | 401 | ||
400 | 402 | ||
401 | 403 | ||
402 | 404 | ||
403 | 405 | ||
404 | 406 | ||
405 | # Target: clean project. |
407 | # Target: clean project. |
406 | clean: begin clean_list finished end |
408 | clean: begin clean_list finished end |
407 | 409 | ||
408 | clean_list : |
410 | clean_list : |
409 | @echo |
411 | @echo |
410 | @echo $(MSG_CLEANING) |
412 | @echo $(MSG_CLEANING) |
411 | $(REMOVE) Flight-Ctrl_*.hex |
413 | $(REMOVE) Flight-Ctrl_*.hex |
412 | $(REMOVE) Flight-Ctrl_*.eep |
414 | $(REMOVE) Flight-Ctrl_*.eep |
413 | $(REMOVE) $(TARGET).obj |
415 | $(REMOVE) $(TARGET).obj |
414 | $(REMOVE) $(TARGET).cof |
416 | $(REMOVE) $(TARGET).cof |
415 | $(REMOVE) Flight-Ctrl_*.elf |
417 | $(REMOVE) Flight-Ctrl_*.elf |
416 | $(REMOVE) Flight-Ctrl_*.map |
418 | $(REMOVE) Flight-Ctrl_*.map |
417 | $(REMOVE) $(TARGET).obj |
419 | $(REMOVE) $(TARGET).obj |
418 | $(REMOVE) $(TARGET).a90 |
420 | $(REMOVE) $(TARGET).a90 |
419 | $(REMOVE) Flight-Ctrl_*.sym |
421 | $(REMOVE) Flight-Ctrl_*.sym |
420 | $(REMOVE) $(TARGET).lnk |
422 | $(REMOVE) $(TARGET).lnk |
421 | $(REMOVE) $(TARGET).lss |
423 | $(REMOVE) $(TARGET).lss |
422 | $(REMOVE) $(OBJ) |
424 | $(REMOVE) $(OBJ) |
423 | $(REMOVE) $(LST) |
425 | $(REMOVE) $(LST) |
424 | $(REMOVE) $(SRC:.c=.s) |
426 | $(REMOVE) $(SRC:.c=.s) |
425 | $(REMOVE) $(SRC:.c=.d) |
427 | $(REMOVE) $(SRC:.c=.d) |
426 | $(REMOVE) $(SRC:.c=.o) |
428 | $(REMOVE) $(SRC:.c=.o) |
427 | 429 | ||
428 | 430 | ||
429 | # Automatically generate C source code dependencies. |
431 | # Automatically generate C source code dependencies. |
430 | # (Code originally taken from the GNU make user manual and modified |
432 | # (Code originally taken from the GNU make user manual and modified |
431 | # (See README.txt Credits).) |
433 | # (See README.txt Credits).) |
432 | # |
434 | # |
433 | # Note that this will work with sh (bash) and sed that is shipped with WinAVR |
435 | # Note that this will work with sh (bash) and sed that is shipped with WinAVR |
434 | # (see the SHELL variable defined above). |
436 | # (see the SHELL variable defined above). |
435 | # This may not work with other shells or other seds. |
437 | # This may not work with other shells or other seds. |
436 | # |
438 | # |
437 | %.d: %.c |
439 | %.d: %.c |
438 | set -e; $(CC) -MM $(ALL_CFLAGS) $< \ |
440 | set -e; $(CC) -MM $(ALL_CFLAGS) $< \ |
439 | | sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > $@; \ |
441 | | sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > $@; \ |
440 | [ -s $@ ] || rm -f $@ |
442 | [ -s $@ ] || rm -f $@ |
441 | 443 | ||
442 | 444 | ||
443 | # Remove the '-' if you want to see the dependency files generated. |
445 | # Remove the '-' if you want to see the dependency files generated. |
444 | -include $(SRC:%.c=%.d) |
446 | -include $(SRC:%.c=%.d) |
445 | 447 | ||
446 | 448 | ||
447 | 449 | ||
448 | # Listing of phony targets. |
450 | # Listing of phony targets. |
449 | .PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \ |
451 | .PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \ |
450 | clean clean_list program |
452 | clean clean_list program |
451 | 453 |