| 43,24 → 43,23 |
|---|
| #define MKOSD_ADDRESS 4 |
| #define BL_ADDRESS 5 |
| |
| |
| /* |
| * FC Debug Struct |
| * portions taken and adapted from |
| * http://svn.mikrokopter.de/filedetails.php?repname=FlightCtrl&path=/tags/V0.88e/uart.h |
| */ |
| typedef struct { |
| unsigned char Status[2]; |
| signed int Analog[32]; // Debugwerte |
| typedef struct { |
| unsigned char Status[2]; |
| signed int Analog[32]; // Debugwerte |
| } __attribute__((packed)) str_DebugOut; |
| |
| typedef struct { |
| unsigned char SWMajor; |
| unsigned char SWMinor; |
| unsigned char ProtoMajor; |
| unsigned char ProtoMinor; |
| unsigned char SWPatch; |
| unsigned char HardwareError[5]; |
| unsigned char SWMajor; |
| unsigned char SWMinor; |
| unsigned char ProtoMajor; |
| unsigned char ProtoMinor; |
| unsigned char SWPatch; |
| unsigned char HardwareError[5]; |
| } __attribute__((packed)) str_VersionInfo; |
| |
| /* |
| 69,17 → 68,16 |
|---|
| * http://svn.mikrokopter.de/filedetails.php?repname=NaviCtrl&path=/tags/V0.20c/ubx.h |
| */ |
| typedef struct { |
| s32 Longitude; // in 1E-7 deg |
| s32 Latitude; // in 1E-7 deg |
| s32 Altitude; // in mm |
| u8 Status;// validity of data |
| s32 Longitude; // in 1E-7 deg |
| s32 Latitude; // in 1E-7 deg |
| s32 Altitude; // in mm |
| u8 Status; // validity of data |
| } __attribute__((packed)) GPS_Pos_t; |
| |
| |
| #define INVALID 0x00 |
| #define NEWDATA 0x01 |
| #define PROCESSED 0x02 |
| |
| |
| /* |
| * NaviCtrl OSD Structs |
| * portions taken and adapted from |
| 86,41 → 84,41 |
|---|
| * http://svn.mikrokopter.de/filedetails.php?repname=NaviCtrl&path=/tags/V0.24b/uart1.h |
| */ |
| typedef struct { |
| u16 Distance; // distance to target in dm |
| s16 Bearing; // course to target in deg |
| u16 Distance; // distance to target in dm |
| s16 Bearing; // course to target in deg |
| } __attribute__((packed)) GPS_PosDev_t; |
| |
| typedef struct { |
| u8 Version; // version of the data structure |
| GPS_Pos_t CurrentPosition; // see ubx.h for details |
| GPS_Pos_t TargetPosition; |
| GPS_PosDev_t TargetPositionDeviation; |
| GPS_Pos_t HomePosition; |
| GPS_PosDev_t HomePositionDeviation; |
| u8 WaypointIndex; // index of current waypoints running from 0 to WaypointNumber-1 |
| u8 WaypointNumber; // number of stored waypoints |
| u8 SatsInUse; // number of satellites used for position solution |
| s16 Altimeter; // hight according to air pressure |
| s16 Variometer; // climb(+) and sink(-) rate |
| u16 FlyingTime; // in seconds |
| u8 UBat; // Battery Voltage in 0.1 Volts |
| u16 GroundSpeed; // speed over ground in cm/s (2D) |
| s16 Heading; // current flight direction in ° as angle to north |
| s16 CompassHeading; // current compass value in ° |
| s8 AngleNick; // current Nick angle in 1° |
| s8 AngleRoll; // current Rick angle in 1° |
| u8 RC_Quality; // RC_Quality |
| u8 FCFlags; // Flags from FC |
| u8 NCFlags; // Flags from NC |
| u8 Errorcode; // 0 --> okay |
| u8 OperatingRadius; // current operation radius around the Home Position in m |
| s16 TopSpeed; // velocity in vertical direction in cm/s |
| u8 TargetHoldTime; // time in s to stay at the given target, counts down to 0 if target has been reached |
| u8 FCStatusFlags2; // StatusFlags2 (since version 5 added) |
| s16 SetpointAltitude; // setpoint for altitude |
| u8 Gas; // for future use |
| u16 Current; // actual current in 0.1A steps |
| u16 UsedCapacity; // used capacity in mAh |
| u8 Version; // version of the data structure |
| GPS_Pos_t CurrentPosition; // see ubx.h for details |
| GPS_Pos_t TargetPosition; |
| GPS_PosDev_t TargetPositionDeviation; |
| GPS_Pos_t HomePosition; |
| GPS_PosDev_t HomePositionDeviation; |
| u8 WaypointIndex; // index of current waypoints running from 0 to WaypointNumber-1 |
| u8 WaypointNumber; // number of stored waypoints |
| u8 SatsInUse; // number of satellites used for position solution |
| s16 Altimeter; // hight according to air pressure |
| s16 Variometer; // climb(+) and sink(-) rate |
| u16 FlyingTime; // in seconds |
| u8 UBat; // Battery Voltage in 0.1 Volts |
| u16 GroundSpeed; // speed over ground in cm/s (2D) |
| s16 Heading; // current flight direction in ° as angle to north |
| s16 CompassHeading; // current compass value in ° |
| s8 AngleNick; // current Nick angle in 1° |
| s8 AngleRoll; // current Rick angle in 1° |
| u8 RC_Quality; // RC_Quality |
| u8 FCFlags; // Flags from FC |
| u8 NCFlags; // Flags from NC |
| u8 Errorcode; // 0 --> okay |
| u8 OperatingRadius; // current operation radius around the Home Position in m |
| s16 TopSpeed; // velocity in vertical direction in cm/s |
| u8 TargetHoldTime; // time in s to stay at the given target, counts down to 0 if target has been reached |
| u8 FCStatusFlags2; // StatusFlags2 (since version 5 added) |
| s16 SetpointAltitude; // setpoint for altitude |
| u8 Gas; // for future use |
| u16 Current; // actual current in 0.1A steps |
| u16 UsedCapacity; // used capacity in mAh |
| } __attribute__((packed)) NaviData_t; |
| |
| #define NC_FLAG_FREE 0x01 |
| 165,132 → 163,130 |
|---|
| #define DEFEKT_PPM_ERR 0x08 |
| #define DEFEKT_MIXER_ERR 0x10 |
| |
| |
| /* |
| * MikroKopter config struct |
| * portions taken and adapted from |
| * http://svn.mikrokopter.de/filedetails.php?repname=FlightCtrl&path=/tags/V0.88e/eeprom.h |
| * http://svn.mikrokopter.de/filedetails.php?repname=FlightCtrl&path=/tags/V0.90j/eeprom.h |
| */ |
| typedef struct { |
| unsigned char Revision; |
| unsigned char Kanalbelegung[12]; // GAS[0], GIER[1],NICK[2], ROLL[3], POTI1, POTI2, POTI3 |
| unsigned char GlobalConfig; // 0x01=Höhenregler aktiv,0x02=Kompass aktiv, 0x04=GPS aktiv, 0x08=Heading Hold aktiv |
| unsigned char Hoehe_MinGas; // Wert : 0-100 |
| unsigned char Luftdruck_D; // Wert : 0-250 |
| unsigned char MaxHoehe; // Wert : 0-32 |
| unsigned char Hoehe_P; // Wert : 0-32 |
| unsigned char Hoehe_Verstaerkung; // Wert : 0-50 |
| unsigned char Hoehe_ACC_Wirkung; // Wert : 0-250 |
| unsigned char Hoehe_HoverBand; // Wert : 0-250 |
| unsigned char Hoehe_GPS_Z; // Wert : 0-250 |
| unsigned char Hoehe_StickNeutralPoint;// Wert : 0-250 |
| unsigned char Stick_P; // Wert : 1-6 |
| unsigned char Stick_D; // Wert : 0-64 |
| unsigned char StickGier_P; // Wert : 1-20 |
| unsigned char Gas_Min; // Wert : 0-32 |
| unsigned char Gas_Max; // Wert : 33-250 |
| unsigned char GyroAccFaktor; // Wert : 1-64 |
| unsigned char KompassWirkung; // Wert : 0-32 |
| unsigned char Gyro_P; // Wert : 10-250 |
| unsigned char Gyro_I; // Wert : 0-250 |
| unsigned char Gyro_D; // Wert : 0-250 |
| unsigned char Gyro_Gier_P; // Wert : 10-250 |
| unsigned char Gyro_Gier_I; // Wert : 0-250 |
| unsigned char Gyro_Stability; // Wert : 0-16 |
| unsigned char UnterspannungsWarnung; // Wert : 0-250 |
| unsigned char NotGas; // Wert : 0-250 //Gaswert bei Empängsverlust |
| unsigned char NotGasZeit; // Wert : 0-250 // Zeitbis auf NotGas geschaltet wird, wg. Rx-Problemen |
| unsigned char Receiver; // 0= Summensignal, 1= Spektrum, 2 =Jeti, 3=ACT DSL, 4=ACT S3D |
| unsigned char I_Faktor; // Wert : 0-250 |
| unsigned char UserParam1; // Wert : 0-250 |
| unsigned char UserParam2; // Wert : 0-250 |
| unsigned char UserParam3; // Wert : 0-250 |
| unsigned char UserParam4; // Wert : 0-250 |
| unsigned char ServoNickControl; // Wert : 0-250 // Stellung des Servos |
| unsigned char ServoNickComp; // Wert : 0-250 // Einfluss Gyro/Servo |
| unsigned char ServoNickMin; // Wert : 0-250 // Anschlag |
| unsigned char ServoNickMax; // Wert : 0-250 // Anschlag |
| //--- Seit V0.75 |
| unsigned char ServoRollControl; // Wert : 0-250 // Stellung des Servos |
| unsigned char ServoRollComp; // Wert : 0-250 |
| unsigned char ServoRollMin; // Wert : 0-250 |
| unsigned char ServoRollMax; // Wert : 0-250 |
| //--- |
| unsigned char ServoNickRefresh; // Speed of the Servo |
| unsigned char ServoManualControlSpeed;// |
| unsigned char CamOrientation; // |
| unsigned char Servo3; // Value or mapping of the Servo Output |
| unsigned char Servo4; // Value or mapping of the Servo Output |
| unsigned char Servo5; // Value or mapping of the Servo Output |
| unsigned char LoopGasLimit; // Wert: 0-250 max. Gas während Looping |
| unsigned char LoopThreshold; // Wert: 0-250 Schwelle für Stickausschlag |
| unsigned char LoopHysterese; // Wert: 0-250 Hysterese für Stickausschlag |
| unsigned char AchsKopplung1; // Wert: 0-250 Faktor, mit dem Gier die Achsen Roll und Nick koppelt (NickRollMitkopplung) |
| unsigned char AchsKopplung2; // Wert: 0-250 Faktor, mit dem Nick und Roll verkoppelt werden |
| unsigned char CouplingYawCorrection; // Wert: 0-250 Faktor, mit dem Nick und Roll verkoppelt werden |
| unsigned char WinkelUmschlagNick; // Wert: 0-250 180°-Punkt |
| unsigned char WinkelUmschlagRoll; // Wert: 0-250 180°-Punkt |
| unsigned char GyroAccAbgleich; // 1/k (Koppel_ACC_Wirkung) |
| unsigned char Driftkomp; |
| unsigned char DynamicStability; |
| unsigned char UserParam5; // Wert : 0-250 |
| unsigned char UserParam6; // Wert : 0-250 |
| unsigned char UserParam7; // Wert : 0-250 |
| unsigned char UserParam8; // Wert : 0-250 |
| //---Output --------------------------------------------- |
| unsigned char J16Bitmask; // for the J16 Output |
| unsigned char J16Timing; // for the J16 Output |
| unsigned char J17Bitmask; // for the J17 Output |
| unsigned char J17Timing; // for the J17 Output |
| // seit version V0.75c |
| unsigned char WARN_J16_Bitmask; // for the J16 Output |
| unsigned char WARN_J17_Bitmask; // for the J17 Output |
| //---NaviCtrl--------------------------------------------- |
| unsigned char NaviGpsModeControl; // Parameters for the Naviboard |
| unsigned char NaviGpsGain; |
| unsigned char NaviGpsP; |
| unsigned char NaviGpsI; |
| unsigned char NaviGpsD; |
| unsigned char NaviGpsPLimit; |
| unsigned char NaviGpsILimit; |
| unsigned char NaviGpsDLimit; |
| unsigned char NaviGpsACC; |
| unsigned char NaviGpsMinSat; |
| unsigned char NaviStickThreshold; |
| unsigned char NaviWindCorrection; |
| unsigned char NaviAccCompensation; // New since 0.86 -> was: SpeedCompensation |
| unsigned char NaviOperatingRadius; |
| unsigned char NaviAngleLimitation; |
| unsigned char NaviPH_LoginTime; |
| //---Ext.Ctrl--------------------------------------------- |
| unsigned char ExternalControl; // for serial Control |
| //---CareFree--------------------------------------------- |
| unsigned char OrientationAngle; // Where is the front-direction? |
| unsigned char CareFreeModeControl; // switch for CareFree |
| unsigned char MotorSafetySwitch; |
| unsigned char MotorSmooth; |
| unsigned char ComingHomeAltitude; |
| unsigned char FailSafeTime; |
| unsigned char MaxAltitude; |
| unsigned char FailsafeChannel; // if the value of this channel is > 100, the MK reports "RC-Lost" |
| unsigned char ServoFilterNick; |
| unsigned char ServoFilterRoll; |
| //------------------------------------------------ |
| unsigned char BitConfig; // (war Loop-Cfg) Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt |
| unsigned char ServoCompInvert; // // 0x01 = Nick, 0x02 = Roll 0 oder 1 // WICHTIG!!! am Ende lassen |
| unsigned char ExtraConfig; // bitcodiert |
| unsigned char GlobalConfig3; // bitcodiert |
| char Name[12]; |
| unsigned char crc; // must be the last byte! |
| } __attribute__((packed)) paramset_t; |
| unsigned char Revision; |
| unsigned char Kanalbelegung[12]; // GAS[0], GIER[1],NICK[2], ROLL[3], POTI1, POTI2, POTI3 |
| unsigned char GlobalConfig; // 0x01=Höhenregler aktiv,0x02=Kompass aktiv, 0x04=GPS aktiv, 0x08=Heading Hold aktiv |
| unsigned char Hoehe_MinGas; // Wert : 0-100 |
| unsigned char Luftdruck_D; // Wert : 0-250 |
| unsigned char MaxHoehe; // Wert : 0-32 |
| unsigned char Hoehe_P; // Wert : 0-32 |
| unsigned char Hoehe_Verstaerkung; // Wert : 0-50 |
| unsigned char Hoehe_ACC_Wirkung; // Wert : 0-250 |
| unsigned char Hoehe_HoverBand; // Wert : 0-250 |
| unsigned char Hoehe_GPS_Z; // Wert : 0-250 |
| unsigned char Hoehe_StickNeutralPoint; // Wert : 0-250 |
| unsigned char Stick_P; // Wert : 1-6 |
| unsigned char Stick_D; // Wert : 0-64 |
| unsigned char StickGier_P; // Wert : 1-20 |
| unsigned char Gas_Min; // Wert : 0-32 |
| unsigned char Gas_Max; // Wert : 33-250 |
| unsigned char GyroAccFaktor; // Wert : 1-64 |
| unsigned char KompassWirkung; // Wert : 0-32 |
| unsigned char Gyro_P; // Wert : 10-250 |
| unsigned char Gyro_I; // Wert : 0-250 |
| unsigned char Gyro_D; // Wert : 0-250 |
| unsigned char Gyro_Gier_P; // Wert : 10-250 |
| unsigned char Gyro_Gier_I; // Wert : 0-250 |
| unsigned char Gyro_Stability; // Wert : 0-16 |
| unsigned char UnterspannungsWarnung; // Wert : 0-250 |
| unsigned char NotGas; // Wert : 0-250 //Gaswert bei Empängsverlust |
| unsigned char NotGasZeit; // Wert : 0-250 // Zeitbis auf NotGas geschaltet wird, wg. Rx-Problemen |
| unsigned char Receiver; // 0= Summensignal, 1= Spektrum, 2 =Jeti, 3=ACT DSL, 4=ACT S3D |
| unsigned char I_Faktor; // Wert : 0-250 |
| unsigned char UserParam1; // Wert : 0-250 |
| unsigned char UserParam2; // Wert : 0-250 |
| unsigned char UserParam3; // Wert : 0-250 |
| unsigned char UserParam4; // Wert : 0-250 |
| unsigned char ServoNickControl; // Wert : 0-250 // Stellung des Servos |
| unsigned char ServoNickComp; // Wert : 0-250 // Einfluss Gyro/Servo |
| unsigned char ServoNickMin; // Wert : 0-250 // Anschlag |
| unsigned char ServoNickMax; // Wert : 0-250 // Anschlag |
| //--- Seit V0.75 |
| unsigned char ServoRollControl; // Wert : 0-250 // Stellung des Servos |
| unsigned char ServoRollComp; // Wert : 0-250 |
| unsigned char ServoRollMin; // Wert : 0-250 |
| unsigned char ServoRollMax; // Wert : 0-250 |
| //--- |
| unsigned char ServoNickRefresh; // Speed of the Servo |
| unsigned char ServoManualControlSpeed; // |
| unsigned char CamOrientation; // |
| unsigned char Servo3; // Value or mapping of the Servo Output |
| unsigned char Servo4; // Value or mapping of the Servo Output |
| unsigned char Servo5; // Value or mapping of the Servo Output |
| unsigned char LoopGasLimit; // Wert: 0-250 max. Gas während Looping |
| unsigned char LoopThreshold; // Wert: 0-250 Schwelle für Stickausschlag |
| unsigned char LoopHysterese; // Wert: 0-250 Hysterese für Stickausschlag |
| unsigned char AchsKopplung1; // Wert: 0-250 Faktor, mit dem Gier die Achsen Roll und Nick koppelt (NickRollMitkopplung) |
| unsigned char AchsKopplung2; // Wert: 0-250 Faktor, mit dem Nick und Roll verkoppelt werden |
| unsigned char CouplingYawCorrection; // Wert: 0-250 Faktor, mit dem Nick und Roll verkoppelt werden |
| unsigned char WinkelUmschlagNick; // Wert: 0-250 180°-Punkt |
| unsigned char WinkelUmschlagRoll; // Wert: 0-250 180°-Punkt |
| unsigned char GyroAccAbgleich; // 1/k (Koppel_ACC_Wirkung) |
| unsigned char Driftkomp; |
| unsigned char DynamicStability; |
| unsigned char UserParam5; // Wert : 0-250 |
| unsigned char UserParam6; // Wert : 0-250 |
| unsigned char UserParam7; // Wert : 0-250 |
| unsigned char UserParam8; // Wert : 0-250 |
| //---Output --------------------------------------------- |
| unsigned char J16Bitmask; // for the J16 Output |
| unsigned char J16Timing; // for the J16 Output |
| unsigned char J17Bitmask; // for the J17 Output |
| unsigned char J17Timing; // for the J17 Output |
| // seit version V0.75c |
| unsigned char WARN_J16_Bitmask; // for the J16 Output |
| unsigned char WARN_J17_Bitmask; // for the J17 Output |
| //---NaviCtrl--------------------------------------------- |
| unsigned char NaviOut1Parameter; // for the J16 Output |
| unsigned char NaviGpsModeControl; // Parameters for the Naviboard |
| unsigned char NaviGpsGain; |
| unsigned char NaviGpsP; |
| unsigned char NaviGpsI; |
| unsigned char NaviGpsD; |
| unsigned char NaviGpsPLimit; |
| unsigned char NaviGpsILimit; |
| unsigned char NaviGpsDLimit; |
| unsigned char NaviGpsACC; |
| unsigned char NaviGpsMinSat; |
| unsigned char NaviStickThreshold; |
| unsigned char NaviWindCorrection; |
| unsigned char NaviAccCompensation; // New since 0.86 -> was: SpeedCompensation |
| unsigned char NaviOperatingRadius; |
| unsigned char NaviAngleLimitation; |
| unsigned char NaviPH_LoginTime; |
| //---Ext.Ctrl--------------------------------------------- |
| unsigned char ExternalControl; // for serial Control |
| //---CareFree--------------------------------------------- |
| unsigned char OrientationAngle; // Where is the front-direction? |
| unsigned char CareFreeModeControl; // switch for CareFree |
| unsigned char MotorSafetySwitch; |
| unsigned char MotorSmooth; |
| unsigned char ComingHomeAltitude; |
| unsigned char FailSafeTime; |
| unsigned char MaxAltitude; |
| unsigned char FailsafeChannel; // if the value of this channel is > 100, the MK reports "RC-Lost" |
| unsigned char ServoFilterNick; |
| unsigned char ServoFilterRoll; |
| //------------------------------------------------ |
| unsigned char BitConfig; // (war Loop-Cfg) Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt |
| unsigned char ServoCompInvert; // // 0x01 = Nick, 0x02 = Roll, 0x04 = relative moving // WICHTIG!!! am Ende lassen |
| unsigned char ExtraConfig; // bitcodiert |
| unsigned char GlobalConfig3; // bitcodiert |
| char Name[12]; |
| unsigned char crc; // must be the last byte! |
| } paramset_t; |
| |
| typedef struct { |
| u8 SettingsIndex; |
| paramset_t param; |
| u8 SettingsIndex; |
| paramset_t param; |
| } __attribute__((packed)) paramset_serial; |
| |
| |
| |
| /* |
| * MikroKopter 3D-Data struct |
| * portions taken and adapted from |
| 297,9 → 293,9 |
|---|
| * http://svn.mikrokopter.de/filedetails.php?repname=NaviCtrl&path=%2Ftags%2FV0.28o%2Fuart1.h |
| */ |
| typedef struct { |
| s16 AngleNick; // in 0.1 deg |
| s16 AngleRoll; // in 0.1 deg |
| s16 Heading; // in 0.1 deg |
| s16 AngleNick; // in 0.1 deg |
| s16 AngleRoll; // in 0.1 deg |
| s16 Heading; // in 0.1 deg |
| u8 StickNick; |
| u8 StickRoll; |
| u8 StickYaw; |
| 309,4 → 305,4 |
|---|
| |
| extern Data3D_t Data3D; |
| |
| #endif |
| #endif |