| 168,139 → 168,140 |
|---|
| /* |
| * MikroKopter config struct |
| * portions taken and adapted from |
| * http://svn.mikrokopter.de/filedetails.php?repname=FlightCtrl&path=/tags/V2.06a/eeprom.h |
| * http://svn.mikrokopter.de/filedetails.php?repname=FlightCtrl&path=/tags/V2.08a/eeprom.h |
| */ |
| |
| #define EEPARAM_REVISION 102 // is count up, if paramater stucture has changed (compatibility) |
| #define EEPARAM_REVISION 103 // is count up, if paramater stucture has changed (compatibility) |
| |
| |
| typedef struct |
| { |
| unsigned char Revision; |
| unsigned char Kanalbelegung[12]; // GAS[0], GIER[1],NICK[2], ROLL[3], POTI1, POTI2, POTI3 |
| unsigned char GlobalConfig; // 0x01=Höhenregler aktiv,0x02=Kompass aktiv, 0x04=GPS aktiv, 0x08=Heading Hold aktiv |
| unsigned char Hoehe_MinGas; // Wert : 0-100 |
| unsigned char Luftdruck_D; // Wert : 0-250 |
| unsigned char HoeheChannel; // Wert : 0-32 |
| unsigned char Hoehe_P; // Wert : 0-32 |
| unsigned char Hoehe_Verstaerkung; // Wert : 0-50 |
| unsigned char Hoehe_ACC_Wirkung; // Wert : 0-250 |
| unsigned char Hoehe_HoverBand; // Wert : 0-250 |
| unsigned char Hoehe_GPS_Z; // Wert : 0-250 |
| unsigned char Hoehe_StickNeutralPoint;// Wert : 0-250 |
| unsigned char Stick_P; // Wert : 1-6 |
| unsigned char Stick_D; // Wert : 0-64 |
| unsigned char StickGier_P; // Wert : 1-20 |
| unsigned char Gas_Min; // Wert : 0-32 |
| unsigned char Gas_Max; // Wert : 33-250 |
| unsigned char GyroAccFaktor; // Wert : 1-64 |
| unsigned char KompassWirkung; // Wert : 0-32 |
| unsigned char Gyro_P; // Wert : 10-250 |
| unsigned char Gyro_I; // Wert : 0-250 |
| unsigned char Gyro_D; // Wert : 0-250 |
| unsigned char Gyro_Gier_P; // Wert : 10-250 |
| unsigned char Gyro_Gier_I; // Wert : 0-250 |
| unsigned char Gyro_Stability; // Wert : 0-16 |
| unsigned char UnterspannungsWarnung; // Wert : 0-250 |
| unsigned char NotGas; // Wert : 0-250 //Gaswert bei Empängsverlust |
| unsigned char NotGasZeit; // Wert : 0-250 // Zeitbis auf NotGas geschaltet wird, wg. Rx-Problemen |
| unsigned char Receiver; // 0= Summensignal, 1= Spektrum, 2 =Jeti, 3=ACT DSL, 4=ACT S3D |
| unsigned char I_Faktor; // Wert : 0-250 |
| unsigned char UserParam1; // Wert : 0-250 |
| unsigned char UserParam2; // Wert : 0-250 |
| unsigned char UserParam3; // Wert : 0-250 |
| unsigned char UserParam4; // Wert : 0-250 |
| unsigned char ServoNickControl; // Wert : 0-250 // Stellung des Servos |
| unsigned char ServoNickComp; // Wert : 0-250 // Einfluss Gyro/Servo |
| unsigned char ServoNickMin; // Wert : 0-250 // Anschlag |
| unsigned char ServoNickMax; // Wert : 0-250 // Anschlag |
| //--- Seit V0.75 |
| unsigned char ServoRollControl; // Wert : 0-250 // Stellung des Servos |
| unsigned char ServoRollComp; // Wert : 0-250 |
| unsigned char ServoRollMin; // Wert : 0-250 |
| unsigned char ServoRollMax; // Wert : 0-250 |
| //--- |
| unsigned char ServoNickRefresh; // Speed of the Servo |
| unsigned char Revision; |
| unsigned char Kanalbelegung[12]; // GAS[0], GIER[1],NICK[2], ROLL[3], POTI1, POTI2, POTI3 |
| unsigned char GlobalConfig; // 0x01=Höhenregler aktiv,0x02=Kompass aktiv, 0x04=GPS aktiv, 0x08=Heading Hold aktiv |
| unsigned char Hoehe_MinGas; // Wert : 0-100 |
| unsigned char Luftdruck_D; // Wert : 0-250 |
| unsigned char HoeheChannel; // Wert : 0-32 |
| unsigned char Hoehe_P; // Wert : 0-32 |
| unsigned char Hoehe_Verstaerkung; // Wert : 0-50 |
| unsigned char Hoehe_ACC_Wirkung; // Wert : 0-250 |
| unsigned char Hoehe_HoverBand; // Wert : 0-250 |
| unsigned char Hoehe_TiltCompensation; // Wert : 0-250 |
| unsigned char Hoehe_StickNeutralPoint;// Wert : 0-250 |
| unsigned char Stick_P; // Wert : 1-6 |
| unsigned char Stick_D; // Wert : 0-64 |
| unsigned char StickGier_P; // Wert : 1-20 |
| unsigned char Gas_Min; // Wert : 0-32 |
| unsigned char Gas_Max; // Wert : 33-250 |
| unsigned char GyroAccFaktor; // Wert : 1-64 |
| unsigned char KompassWirkung; // Wert : 0-32 |
| unsigned char Gyro_P; // Wert : 10-250 |
| unsigned char Gyro_I; // Wert : 0-250 |
| unsigned char Gyro_D; // Wert : 0-250 |
| unsigned char Gyro_Gier_P; // Wert : 10-250 |
| unsigned char Gyro_Gier_I; // Wert : 0-250 |
| unsigned char Gyro_Stability; // Wert : 0-16 |
| unsigned char UnterspannungsWarnung; // Wert : 0-250 |
| unsigned char NotGas; // Wert : 0-250 //Gaswert bei Empängsverlust |
| unsigned char NotGasZeit; // Wert : 0-250 // Zeitbis auf NotGas geschaltet wird, wg. Rx-Problemen |
| unsigned char Receiver; // 0= Summensignal, 1= Spektrum, 2 =Jeti, 3=ACT DSL, 4=ACT S3D |
| unsigned char I_Faktor; // Wert : 0-250 |
| unsigned char UserParam1; // Wert : 0-250 |
| unsigned char UserParam2; // Wert : 0-250 |
| unsigned char UserParam3; // Wert : 0-250 |
| unsigned char UserParam4; // Wert : 0-250 |
| unsigned char ServoNickControl; // Wert : 0-250 // Stellung des Servos |
| unsigned char ServoNickComp; // Wert : 0-250 // Einfluss Gyro/Servo |
| unsigned char ServoNickMin; // Wert : 0-250 // Anschlag |
| unsigned char ServoNickMax; // Wert : 0-250 // Anschlag |
| //--- Seit V0.75 |
| unsigned char ServoRollControl; // Wert : 0-250 // Stellung des Servos |
| unsigned char ServoRollComp; // Wert : 0-250 |
| unsigned char ServoRollMin; // Wert : 0-250 |
| unsigned char ServoRollMax; // Wert : 0-250 |
| //--- |
| unsigned char ServoNickRefresh; // Speed of the Servo |
| unsigned char ServoManualControlSpeed;// |
| unsigned char CamOrientation; // |
| unsigned char Servo3; // Value or mapping of the Servo Output |
| unsigned char Servo4; // Value or mapping of the Servo Output |
| unsigned char Servo5; // Value or mapping of the Servo Output |
| unsigned char LoopGasLimit; // Wert: 0-250 max. Gas während Looping |
| unsigned char LoopThreshold; // Wert: 0-250 Schwelle für Stickausschlag |
| unsigned char LoopHysterese; // Wert: 0-250 Hysterese für Stickausschlag |
| unsigned char AchsKopplung1; // Wert: 0-250 Faktor, mit dem Gier die Achsen Roll und Nick koppelt (NickRollMitkopplung) |
| unsigned char AchsKopplung2; // Wert: 0-250 Faktor, mit dem Nick und Roll verkoppelt werden |
| unsigned char CouplingYawCorrection; // Wert: 0-250 Faktor, mit dem Nick und Roll verkoppelt werden |
| unsigned char WinkelUmschlagNick; // Wert: 0-250 180°-Punkt |
| unsigned char WinkelUmschlagRoll; // Wert: 0-250 180°-Punkt |
| unsigned char GyroAccAbgleich; // 1/k (Koppel_ACC_Wirkung) |
| unsigned char Driftkomp; |
| unsigned char DynamicStability; |
| unsigned char UserParam5; // Wert : 0-250 |
| unsigned char UserParam6; // Wert : 0-250 |
| unsigned char UserParam7; // Wert : 0-250 |
| unsigned char UserParam8; // Wert : 0-250 |
| //---Output --------------------------------------------- |
| unsigned char J16Bitmask; // for the J16 Output |
| unsigned char J16Timing; // for the J16 Output |
| unsigned char J17Bitmask; // for the J17 Output |
| unsigned char J17Timing; // for the J17 Output |
| // seit version V0.75c |
| unsigned char WARN_J16_Bitmask; // for the J16 Output |
| unsigned char WARN_J17_Bitmask; // for the J17 Output |
| //---NaviCtrl--------------------------------------------- |
| unsigned char AutoPhotoDistance; // Auto Photo |
| unsigned char NaviGpsModeChannel; // Parameters for the Naviboard |
| unsigned char NaviGpsGain; |
| unsigned char NaviGpsP; |
| unsigned char NaviGpsI; |
| unsigned char NaviGpsD; |
| unsigned char NaviGpsPLimit; |
| unsigned char NaviGpsILimit; |
| unsigned char NaviGpsDLimit; |
| unsigned char NaviGpsA; |
| unsigned char NaviGpsMinSat; |
| unsigned char NaviStickThreshold; |
| unsigned char NaviWindCorrection; |
| unsigned char NaviAccCompensation; // New since 0.86 -> was: SpeedCompensation |
| unsigned char NaviMaxFlyingRange; // in 10m |
| unsigned char NaviAngleLimitation; |
| unsigned char NaviPH_LoginTime; |
| unsigned char NaviDescendRange; |
| //---Ext.Ctrl--------------------------------------------- |
| unsigned char ExternalControl; // for serial Control |
| //---CareFree--------------------------------------------- |
| unsigned char OrientationAngle; // Where is the front-direction? |
| unsigned char CareFreeChannel; // switch for CareFree |
| unsigned char Servo3; // Value or mapping of the Servo Output |
| unsigned char Servo4; // Value or mapping of the Servo Output |
| unsigned char Servo5; // Value or mapping of the Servo Output |
| unsigned char LoopGasLimit; // Wert: 0-250 max. Gas während Looping |
| unsigned char LoopThreshold; // Wert: 0-250 Schwelle für Stickausschlag |
| unsigned char LoopHysterese; // Wert: 0-250 Hysterese für Stickausschlag |
| unsigned char AchsKopplung1; // Wert: 0-250 Faktor, mit dem Gier die Achsen Roll und Nick koppelt (NickRollMitkopplung) |
| unsigned char AchsKopplung2; // Wert: 0-250 Faktor, mit dem Nick und Roll verkoppelt werden |
| unsigned char CouplingYawCorrection; // Wert: 0-250 Faktor, mit dem Nick und Roll verkoppelt werden |
| unsigned char WinkelUmschlagNick; // Wert: 0-250 180°-Punkt |
| unsigned char WinkelUmschlagRoll; // Wert: 0-250 180°-Punkt |
| unsigned char GyroAccAbgleich; // 1/k (Koppel_ACC_Wirkung) |
| unsigned char Driftkomp; |
| unsigned char DynamicStability; |
| unsigned char UserParam5; // Wert : 0-250 |
| unsigned char UserParam6; // Wert : 0-250 |
| unsigned char UserParam7; // Wert : 0-250 |
| unsigned char UserParam8; // Wert : 0-250 |
| //---Output --------------------------------------------- |
| unsigned char J16Bitmask; // for the J16 Output |
| unsigned char J16Timing; // for the J16 Output |
| unsigned char J17Bitmask; // for the J17 Output |
| unsigned char J17Timing; // for the J17 Output |
| // seit version V0.75c |
| unsigned char WARN_J16_Bitmask; // for the J16 Output |
| unsigned char WARN_J17_Bitmask; // for the J17 Output |
| //---NaviCtrl--------------------------------------------- |
| unsigned char AutoPhotoDistance; // Auto Photo |
| unsigned char NaviGpsModeChannel; // Parameters for the Naviboard |
| unsigned char NaviGpsGain; |
| unsigned char NaviGpsP; |
| unsigned char NaviGpsI; |
| unsigned char NaviGpsD; |
| unsigned char NaviGpsPLimit; |
| unsigned char NaviGpsILimit; |
| unsigned char NaviGpsDLimit; |
| unsigned char NaviGpsA; |
| unsigned char NaviGpsMinSat; |
| unsigned char NaviStickThreshold; |
| unsigned char NaviWindCorrection; |
| unsigned char NaviAccCompensation; // New since 0.86 -> was: SpeedCompensation |
| unsigned char NaviMaxFlyingRange; // in 10m |
| unsigned char NaviAngleLimitation; |
| unsigned char NaviPH_LoginTime; |
| unsigned char NaviDescendRange; |
| //---Ext.Ctrl--------------------------------------------- |
| unsigned char ExternalControl; // for serial Control |
| //---CareFree--------------------------------------------- |
| unsigned char OrientationAngle; // Where is the front-direction? |
| unsigned char CareFreeChannel; // switch for CareFree |
| unsigned char MotorSafetySwitch; |
| unsigned char MotorSmooth; |
| unsigned char ComingHomeAltitude; |
| unsigned char FailSafeTime; |
| unsigned char MaxAltitude; |
| unsigned char FailsafeChannel; // if the value of this channel is > 100, the MK reports "RC-Lost" |
| unsigned char ServoFilterNick; |
| unsigned char ServoFilterRoll; |
| unsigned char FailsafeChannel; // if the value of this channel is > 100, the MK reports "RC-Lost" |
| unsigned char ServoFilterNick; |
| unsigned char ServoFilterRoll; |
| unsigned char Servo3OnValue; |
| unsigned char Servo3OffValue; |
| unsigned char Servo4OnValue; |
| unsigned char Servo4OffValue; |
| unsigned char StartLandChannel; |
| unsigned char LandingSpeed; |
| unsigned char CompassOffset; |
| unsigned char AutoLandingVoltage; // in 0,1V 0 -> disabled |
| unsigned char ComingHomeVoltage; // in 0,1V 0 -> disabled |
| unsigned char AutoPhotoAtitudes; |
| unsigned char SingleWpSpeed; |
| //------------------------------------------------ |
| unsigned char BitConfig; // (war Loop-Cfg) Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt |
| unsigned char ServoCompInvert; // // 0x01 = Nick, 0x02 = Roll, 0x04 = relative moving // WICHTIG!!! am Ende lassen |
| unsigned char ExtraConfig; // bitcodiert |
| unsigned char GlobalConfig3; // bitcodiert |
| char Name[12]; |
| unsigned char crc; // must be the last byte! |
| } paramset_t; // 127 bytes |
| unsigned char StartLandChannel; |
| unsigned char LandingSpeed; |
| unsigned char CompassOffset; |
| unsigned char AutoLandingVoltage; // in 0,1V 0 -> disabled |
| unsigned char ComingHomeVoltage; // in 0,1V 0 -> disabled |
| unsigned char AutoPhotoAtitudes; |
| unsigned char SingleWpSpeed; |
| //------------------------------------------------ |
| unsigned char BitConfig; // (war Loop-Cfg) Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt |
| unsigned char ServoCompInvert; // // 0x01 = Nick, 0x02 = Roll, 0x04 = relative moving // WICHTIG!!! am Ende lassen |
| unsigned char ExtraConfig; // bitcodiert |
| unsigned char GlobalConfig3; // bitcodiert |
| char Name[12]; |
| unsigned char crc; // must be the last byte! |
| } paramset_t; // 134 bytes (V1.06) |
| |
| |
| typedef struct { |
| u8 SettingsIndex; |
| paramset_t param; |