| 0,0 → 1,415 |
|---|
| /*--------------------------------------------------------------------------------------------------------------------------------------------------- |
| * irmp.h |
| * |
| * Copyright (c) 2009-2010 Frank Meyer - frank(at)fli4l.de |
| * |
| * $Id: irmp.h,v 1.44 2010/11/09 19:18:32 fm Exp $ |
| * |
| * ATMEGA88 @ 8 MHz |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| *--------------------------------------------------------------------------------------------------------------------------------------------------- |
| */ |
| |
| #ifndef _WC_IRMP_H_ |
| #define _WC_IRMP_H_ |
| |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif |
| |
| /*--------------------------------------------------------------------------------------------------------------------------------------------------- |
| * timing constants: |
| *--------------------------------------------------------------------------------------------------------------------------------------------------- |
| */ |
| #define IRMP_TIMEOUT_TIME 16500.0e-6 // timeout after 16.5 ms darkness |
| #define IRMP_TIMEOUT_TIME_MS 16500L // timeout after 16.5 ms darkness |
| |
| #if IRMP_SUPPORT_NIKON_PROTOCOL == 1 |
| #define IRMP_TIMEOUT_NIKON_TIME 29500.0e-6 // 2nd timeout after 29.5 ms darkness (only for NIKON!) |
| #define IRMP_TIMEOUT_NIKON_TIME_MS 29500L // 2nd timeout after 29.5 ms darkness |
| typedef uint16_t PAUSE_LEN; |
| #define IRMP_TIMEOUT_NIKON_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_NIKON_TIME + 0.5) |
| #else |
| #if (F_INTERRUPTS * IRMP_TIMEOUT_TIME_MS) / 1000000 >= 254 |
| typedef uint16_t PAUSE_LEN; |
| #else |
| typedef uint8_t PAUSE_LEN; |
| #endif |
| #endif |
| |
| #define IRMP_TIMEOUT_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_TIME + 0.5) |
| |
| /*--------------------------------------------------------------------------------------------------------------------------------------------------- |
| * IR protocols |
| *--------------------------------------------------------------------------------------------------------------------------------------------------- |
| */ |
| #define IRMP_SIRCS_PROTOCOL 1 // Sony |
| #define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc. |
| #define IRMP_SAMSUNG_PROTOCOL 3 // Samsung |
| #define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita |
| #define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc) |
| #define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba |
| #define IRMP_RC5_PROTOCOL 7 // Philips etc |
| #define IRMP_DENON_PROTOCOL 8 // Denon |
| #define IRMP_RC6_PROTOCOL 9 // Philips etc |
| #define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37 |
| #define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC |
| #define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba |
| #define IRMP_NUBERT_PROTOCOL 13 // Nubert |
| #define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen |
| #define IRMP_GRUNDIG_PROTOCOL 15 // Grundig |
| #define IRMP_NOKIA_PROTOCOL 16 // Nokia |
| #define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset |
| #define IRMP_FDC_PROTOCOL 18 // FDC keyboard |
| #define IRMP_RCCAR_PROTOCOL 19 // RC Car |
| #define IRMP_JVC_PROTOCOL 20 // JVC |
| #define IRMP_RC6A_PROTOCOL 21 // RC6A, e.g. Kathrein, XBOX |
| #define IRMP_NIKON_PROTOCOL 22 // Nikon |
| |
| // some flags of struct IRMP_PARAMETER: |
| #define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01 |
| #define IRMP_PARAM_FLAG_1ST_PULSE_IS_1 0x02 |
| |
| #define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse |
| #define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause |
| #define SIRCS_1_PULSE_TIME 1200.0e-6 // 1200 usec pulse |
| #define SIRCS_0_PULSE_TIME 600.0e-6 // 600 usec pulse |
| #define SIRCS_PAUSE_TIME 600.0e-6 // 600 usec pause |
| #define SIRCS_FRAMES 3 // SIRCS sends each frame 3 times |
| #define SIRCS_AUTO_REPETITION_PAUSE_TIME 25.0e-3 // auto repetition after 25ms |
| #define SIRCS_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms |
| #define SIRCS_ADDRESS_OFFSET 15 // skip 15 bits |
| #define SIRCS_ADDRESS_LEN 5 // read up to 5 address bits |
| #define SIRCS_COMMAND_OFFSET 0 // skip 0 bits |
| #define SIRCS_COMMAND_LEN 15 // read 12-15 command bits |
| #define SIRCS_MINIMUM_DATA_LEN 12 // minimum data length |
| #define SIRCS_COMPLETE_DATA_LEN 20 // complete length - may be up to 20 |
| #define SIRCS_STOP_BIT 0 // has no stop bit |
| #define SIRCS_LSB 1 // LSB...MSB |
| #define SIRCS_FLAGS 0 // flags |
| |
| #define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse |
| #define NEC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause |
| #define NEC_REPEAT_START_BIT_PAUSE_TIME 2250.0e-6 // 2250 usec pause |
| #define NEC_PULSE_TIME 560.0e-6 // 560 usec pulse |
| #define NEC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause |
| #define NEC_0_PAUSE_TIME 560.0e-6 // 560 usec pause |
| #define NEC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms |
| #define NEC_ADDRESS_OFFSET 0 // skip 0 bits |
| #define NEC_ADDRESS_LEN 16 // read 16 address bits |
| #define NEC_COMMAND_OFFSET 16 // skip 16 bits (8 address + 8 /address) |
| #define NEC_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command) |
| #define NEC_COMPLETE_DATA_LEN 32 // complete length |
| #define NEC_STOP_BIT 1 // has stop bit |
| #define NEC_LSB 1 // LSB...MSB |
| #define NEC_FLAGS 0 // flags |
| |
| #define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse |
| #define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause |
| #define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse |
| #define SAMSUNG_1_PAUSE_TIME 1450.0e-6 // 1450 usec pause |
| #define SAMSUNG_0_PAUSE_TIME 450.0e-6 // 450 usec pause |
| #define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
| #define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits |
| #define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits |
| #define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit |
| #define SAMSUNG_ID_LEN 4 // read 4 id bits |
| #define SAMSUNG_COMMAND_OFFSET 21 // skip 16 + 1 sync + 4 data bits |
| #define SAMSUNG_COMMAND_LEN 16 // read 16 command bits |
| #define SAMSUNG_COMPLETE_DATA_LEN 37 // complete length |
| #define SAMSUNG_STOP_BIT 1 // has stop bit |
| #define SAMSUNG_LSB 1 // LSB...MSB? |
| #define SAMSUNG_FLAGS 0 // flags |
| |
| #define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits |
| #define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits |
| #define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length |
| #define SAMSUNG32_FRAMES 2 // SAMSUNG32 sends each frame 2 times |
| #define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms |
| #define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 40ms |
| |
| #define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse |
| #define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause |
| #define MATSUSHITA_PULSE_TIME 872.0e-6 // 872 usec pulse |
| #define MATSUSHITA_1_PAUSE_TIME 2616.0e-6 // 2616 usec pause |
| #define MATSUSHITA_0_PAUSE_TIME 872.0e-6 // 872 usec pause |
| #define MATSUSHITA_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
| #define MATSUSHITA_ADDRESS_OFFSET 12 // skip 12 bits |
| #define MATSUSHITA_ADDRESS_LEN 12 // read 12 address bits |
| #define MATSUSHITA_COMMAND_OFFSET 0 // skip 0 bits |
| #define MATSUSHITA_COMMAND_LEN 12 // read 12 bits (6 custom + 6 command) |
| #define MATSUSHITA_COMPLETE_DATA_LEN 24 // complete length |
| #define MATSUSHITA_STOP_BIT 1 // has stop bit |
| #define MATSUSHITA_LSB 1 // LSB...MSB? |
| #define MATSUSHITA_FLAGS 0 // flags |
| |
| #define KASEIKYO_START_BIT_PULSE_TIME 3380.0e-6 // 3380 usec pulse |
| #define KASEIKYO_START_BIT_PAUSE_TIME 1690.0e-6 // 1690 usec pause |
| #define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse |
| #define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause |
| #define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause |
| #define KASEIKYO_AUTO_REPETITION_PAUSE_TIME 74.0e-3 // repetition after 74 ms |
| #define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 74.0e-3 // frame repeat after 74 ms |
| #define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits |
| #define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits |
| #define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre) |
| #define KASEIKYO_COMMAND_LEN 12 // read 12 command bits (10 real command & 2 id) |
| #define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length |
| #define KASEIKYO_STOP_BIT 1 // has stop bit |
| #define KASEIKYO_LSB 1 // LSB...MSB? |
| #define KASEIKYO_FRAMES 2 // KASEIKYO sends 1st frame 2 times |
| #define KASEIKYO_FLAGS 0 // flags |
| |
| #define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse |
| #define RECS80_START_BIT_PAUSE_TIME 7432.0e-6 // 7432 usec pause |
| #define RECS80_PULSE_TIME 158.0e-6 // 158 usec pulse |
| #define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause |
| #define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause |
| #define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
| #define RECS80_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle) |
| #define RECS80_ADDRESS_LEN 3 // read 3 address bits |
| #define RECS80_COMMAND_OFFSET 5 // skip 5 bits (2nd start + 1 toggle + 3 address) |
| #define RECS80_COMMAND_LEN 6 // read 6 command bits |
| #define RECS80_COMPLETE_DATA_LEN 11 // complete length |
| #define RECS80_STOP_BIT 1 // has stop bit |
| #define RECS80_LSB 0 // MSB...LSB |
| #define RECS80_FLAGS 0 // flags |
| |
| #define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause |
| #define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
| #define RC5_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle) |
| #define RC5_ADDRESS_LEN 5 // read 5 address bits |
| #define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address) |
| #define RC5_COMMAND_LEN 6 // read 6 command bits |
| #define RC5_COMPLETE_DATA_LEN 13 // complete length |
| #define RC5_STOP_BIT 0 // has no stop bit |
| #define RC5_LSB 0 // MSB...LSB |
| #define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags |
| |
| #define DENON_PULSE_TIME 275.0e-6 // 275 usec pulse |
| #define DENON_1_PAUSE_TIME 1900.0e-6 // 1900 usec pause |
| #define DENON_0_PAUSE_TIME 775.0e-6 // 775 usec pause |
| #define DENON_FRAMES 2 // DENON sends each frame 2 times |
| #define DENON_AUTO_REPETITION_PAUSE_TIME 65.0e-3 // inverted repetition after 65ms |
| #define DENON_FRAME_REPEAT_PAUSE_TIME 65.0e-3 // frame repeat after 65ms |
| #define DENON_ADDRESS_OFFSET 0 // skip 0 bits |
| #define DENON_ADDRESS_LEN 5 // read 5 address bits |
| #define DENON_COMMAND_OFFSET 5 // skip 5 |
| #define DENON_COMMAND_LEN 10 // read 10 command bits |
| #define DENON_COMPLETE_DATA_LEN 15 // complete length |
| #define DENON_STOP_BIT 1 // has stop bit |
| #define DENON_LSB 0 // MSB...LSB |
| #define DENON_FLAGS 0 // flags |
| |
| #define RC6_START_BIT_PULSE_TIME 2666.0e-6 // 2.666 msec pulse |
| #define RC6_START_BIT_PAUSE_TIME 889.0e-6 // 889 usec pause |
| #define RC6_TOGGLE_BIT_TIME 889.0e-6 // 889 msec pulse/pause |
| #define RC6_BIT_TIME 444.0e-6 // 889 usec pulse/pause |
| #define RC6_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
| #define RC6_ADDRESS_OFFSET 5 // skip "1" + 3 mode bits + 1 toggle bit |
| #define RC6_ADDRESS_LEN 8 // read 8 address bits |
| #define RC6_COMMAND_OFFSET 13 // skip 12 bits ("1" + 3 mode + 1 toggle + 8 address) |
| #define RC6_COMMAND_LEN 8 // read 8 command bits |
| #define RC6_COMPLETE_DATA_LEN_SHORT 21 // complete length |
| #define RC6_COMPLETE_DATA_LEN_LONG 36 // complete length |
| #define RC6_STOP_BIT 0 // has no stop bit |
| #define RC6_LSB 0 // MSB...LSB |
| #define RC6_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags |
| |
| #define RECS80EXT_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse |
| #define RECS80EXT_START_BIT_PAUSE_TIME 3637.0e-6 // 3637 usec pause |
| #define RECS80EXT_PULSE_TIME 158.0e-6 // 158 usec pulse |
| #define RECS80EXT_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause |
| #define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause |
| #define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
| #define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle) |
| #define RECS80EXT_ADDRESS_LEN 4 // read 3 address bits |
| #define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address) |
| #define RECS80EXT_COMMAND_LEN 6 // read 6 command bits |
| #define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length |
| #define RECS80EXT_STOP_BIT 1 // has stop bit |
| #define RECS80EXT_LSB 0 // MSB...LSB |
| #define RECS80EXT_FLAGS 0 // flags |
| |
| #define NUBERT_START_BIT_PULSE_TIME 1340.0e-6 // 1340 usec pulse |
| #define NUBERT_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause |
| #define NUBERT_1_PULSE_TIME 1340.0e-6 // 1340 usec pulse |
| #define NUBERT_1_PAUSE_TIME 340.0e-6 // 340 usec pause |
| #define NUBERT_0_PULSE_TIME 500.0e-6 // 500 usec pulse |
| #define NUBERT_0_PAUSE_TIME 1300.0e-6 // 1300 usec pause |
| #define NUBERT_FRAMES 2 // Nubert sends 2 frames |
| #define NUBERT_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms |
| #define NUBERT_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms |
| #define NUBERT_ADDRESS_OFFSET 0 // skip 0 bits |
| #define NUBERT_ADDRESS_LEN 0 // read 0 address bits |
| #define NUBERT_COMMAND_OFFSET 0 // skip 0 bits |
| #define NUBERT_COMMAND_LEN 10 // read 10 bits |
| #define NUBERT_COMPLETE_DATA_LEN 10 // complete length |
| #define NUBERT_STOP_BIT 1 // has stop bit |
| #define NUBERT_LSB 0 // MSB? |
| #define NUBERT_FLAGS 0 // flags |
| |
| #define BANG_OLUFSEN_START_BIT1_PULSE_TIME 200.0e-6 // 200 usec pulse |
| #define BANG_OLUFSEN_START_BIT1_PAUSE_TIME 3125.0e-6 // 3125 usec pause |
| #define BANG_OLUFSEN_START_BIT2_PULSE_TIME 200.0e-6 // 200 usec pulse |
| #define BANG_OLUFSEN_START_BIT2_PAUSE_TIME 3125.0e-6 // 3125 usec pause |
| #define BANG_OLUFSEN_START_BIT3_PULSE_TIME 200.0e-6 // 200 usec pulse |
| #define BANG_OLUFSEN_START_BIT3_PAUSE_TIME 15625.0e-6 // 15625 usec pause |
| #define BANG_OLUFSEN_START_BIT4_PULSE_TIME 200.0e-6 // 200 usec pulse |
| #define BANG_OLUFSEN_START_BIT4_PAUSE_TIME 3125.0e-6 // 3125 usec pause |
| #define BANG_OLUFSEN_PULSE_TIME 200.0e-6 // 200 usec pulse |
| #define BANG_OLUFSEN_1_PAUSE_TIME 9375.0e-6 // 9375 usec pause |
| #define BANG_OLUFSEN_0_PAUSE_TIME 3125.0e-6 // 3125 usec pause |
| #define BANG_OLUFSEN_R_PAUSE_TIME 6250.0e-6 // 6250 usec pause (repeat last bit) |
| #define BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME 12500.0e-6 // 12500 usec pause (trailer bit) |
| #define BANG_OLUFSEN_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
| #define BANG_OLUFSEN_ADDRESS_OFFSET 0 // no address bits |
| #define BANG_OLUFSEN_ADDRESS_LEN 0 // no address bits |
| #define BANG_OLUFSEN_COMMAND_OFFSET 3 // skip startbits 2, 3, 4 |
| #define BANG_OLUFSEN_COMMAND_LEN 16 // read 16 command bits |
| #define BANG_OLUFSEN_COMPLETE_DATA_LEN 20 // complete length: startbits 2, 3, 4 + 16 data bits + trailer bit |
| #define BANG_OLUFSEN_STOP_BIT 1 // has stop bit |
| #define BANG_OLUFSEN_LSB 0 // MSB...LSB |
| #define BANG_OLUFSEN_FLAGS 0 // flags |
| |
| #define GRUNDIG_OR_NOKIA_BIT_TIME 528.0e-6 // 528 usec pulse/pause |
| #define GRUNDIG_OR_NOKIA_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit |
| #define GRUNDIG_OR_NOKIA_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms |
| #define GRUNDIG_OR_NOKIA_STOP_BIT 0 // has no stop bit |
| #define GRUNDIG_OR_NOKIA_LSB 1 // MSB...LSB |
| #define GRUNDIG_OR_NOKIA_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags |
| |
| #define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times |
| #define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms |
| #define GRUNDIG_ADDRESS_OFFSET 0 // no address |
| #define GRUNDIG_ADDRESS_LEN 0 // no address |
| #define GRUNDIG_COMMAND_OFFSET 1 // skip 1 start bit |
| #define GRUNDIG_COMMAND_LEN 9 // read 9 command bits |
| #define GRUNDIG_COMPLETE_DATA_LEN 10 // complete length: 1 start bit + 9 data bits |
| |
| #define NOKIA_FRAMES 3 // NOKIA sends each frame 1 + 1 + 1 times |
| #define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms |
| #define NOKIA_ADDRESS_OFFSET 9 // skip 9 bits (1 start bit + 8 data bits) |
| #define NOKIA_ADDRESS_LEN 8 // 7 address bits |
| #define NOKIA_COMMAND_OFFSET 1 // skip 1 bit (1 start bit) |
| #define NOKIA_COMMAND_LEN 8 // read 8 command bits |
| #define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits |
| |
| #define SIEMENS_BIT_TIME 250.0e-6 // 250 usec pulse/pause |
| #define SIEMENS_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
| #define SIEMENS_ADDRESS_OFFSET 2 // skip 2 start bits |
| #define SIEMENS_ADDRESS_LEN 12 // read 12 address bits |
| #define SIEMENS_COMMAND_OFFSET 15 // skip 15 bits (2 start bits + 12 address bits + 1 inverted bit) |
| #define SIEMENS_COMMAND_LEN 8 // read 7 + 1 command bits, last bit is only check bit. |
| #define SIEMENS_COMPLETE_DATA_LEN 23 // complete length |
| #define SIEMENS_STOP_BIT 0 // has no stop bit |
| #define SIEMENS_LSB 0 // MSB...LSB |
| #define SIEMENS_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags |
| |
| #define FDC_START_BIT_PULSE_TIME 2085.0e-6 // 2085 usec pulse |
| #define FDC_START_BIT_PAUSE_TIME 966.0e-6 // 966 usec pause |
| #define FDC_PULSE_TIME 300.0e-6 // 300 usec pulse |
| #define FDC_1_PAUSE_TIME 715.0e-6 // 715 usec pause |
| #define FDC_0_PAUSE_TIME 220.0e-6 // 220 usec pause |
| #define FDC_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms |
| #define FDC_ADDRESS_OFFSET 0 // skip 0 bits |
| #define FDC_ADDRESS_LEN 14 // read 14 address bits, but use only 6, shift 8 into command |
| #define FDC_COMMAND_OFFSET 20 // skip 20 bits |
| #define FDC_COMMAND_LEN 12 // read 12 bits |
| #define FDC_COMPLETE_DATA_LEN 40 // complete length |
| #define FDC_STOP_BIT 1 // has stop bit |
| #define FDC_LSB 1 // LSB...MSB |
| #define FDC_FLAGS 0 // flags |
| |
| #define RCCAR_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse |
| #define RCCAR_START_BIT_PAUSE_TIME 2000.0e-6 // 2000 usec pause |
| #define RCCAR_PULSE_TIME 600.0e-6 // 360 usec pulse |
| #define RCCAR_1_PAUSE_TIME 450.0e-6 // 650 usec pause |
| #define RCCAR_0_PAUSE_TIME 900.0e-6 // 180 usec pause |
| #define RCCAR_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms |
| #define RCCAR_ADDRESS_OFFSET 0 // skip 0 bits |
| #define RCCAR_ADDRESS_LEN 0 // read 0 address bits |
| #define RCCAR_COMMAND_OFFSET 0 // skip 0 bits |
| #define RCCAR_COMMAND_LEN 13 // read 13 bits |
| #define RCCAR_COMPLETE_DATA_LEN 13 // complete length |
| #define RCCAR_STOP_BIT 1 // has stop bit |
| #define RCCAR_LSB 1 // LSB...MSB |
| #define RCCAR_FLAGS 0 // flags |
| |
| #define JVC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse |
| #define JVC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause |
| #define JVC_PULSE_TIME 560.0e-6 // 560 usec pulse |
| #define JVC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause |
| #define JVC_0_PAUSE_TIME 560.0e-6 // 560 usec pause |
| #define JVC_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms |
| #define JVC_ADDRESS_OFFSET 0 // skip 0 bits |
| #define JVC_ADDRESS_LEN 4 // read 4 address bits |
| #define JVC_COMMAND_OFFSET 4 // skip 4 bits |
| #define JVC_COMMAND_LEN 12 // read 12 bits |
| #define JVC_COMPLETE_DATA_LEN 16 // complete length |
| #define JVC_STOP_BIT 1 // has stop bit |
| #define JVC_LSB 1 // LSB...MSB |
| #define JVC_FLAGS 0 // flags |
| |
| #define NIKON_START_BIT_PULSE_TIME 2200.0e-6 // 2200 usec pulse |
| #define NIKON_START_BIT_PAUSE_TIME 27100.0e-6 // 27100 usec pause |
| #define NIKON_PULSE_TIME 500.0e-6 // 520 usec pulse |
| #define NIKON_1_PAUSE_TIME 3500.0e-6 // 3500 usec pause |
| #define NIKON_0_PAUSE_TIME 1500.0e-6 // 1500 usec pause |
| #define NIKON_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms |
| #define NIKON_ADDRESS_OFFSET 0 // skip 0 bits |
| #define NIKON_ADDRESS_LEN 0 // read 0 address bits |
| #define NIKON_COMMAND_OFFSET 0 // skip 0 bits |
| #define NIKON_COMMAND_LEN 2 // read 2 bits |
| #define NIKON_COMPLETE_DATA_LEN 2 // complete length |
| #define NIKON_STOP_BIT 1 // has stop bit |
| #define NIKON_LSB 0 // LSB...MSB |
| #define NIKON_FLAGS 0 // flags |
| |
| #define AUTO_FRAME_REPETITION_TIME 80.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms |
| // KASEIKYO: automatic repetition after 75ms |
| |
| #define TRUE 1 |
| #define FALSE 0 |
| |
| #define IRMP_FLAG_REPETITION 0x01 |
| |
| typedef struct |
| { |
| uint8_t protocol; // protocol, i.e. NEC_PROTOCOL |
| uint16_t address; // address |
| uint16_t command; // command |
| uint8_t flags; // flags, e.g. repetition |
| } IRMP_DATA; |
| |
| |
| /** |
| * Initialize IRMP decoder |
| * @details Configures IRMP input pin |
| */ |
| extern void irmp_init (void); |
| |
| /** |
| * Get IRMP data |
| * @details gets decoded IRMP data |
| * @param pointer in order to store IRMP data |
| * @return TRUE: successful, FALSE: failed |
| */ |
| extern uint8_t irmp_get_data (IRMP_DATA *); |
| |
| /** |
| * ISR routine |
| * @details ISR routine, called 10000 times per second |
| */ |
| extern uint8_t irmp_ISR (void); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* _WC_IRMP_H_ */ |