| /MikroBlink/Blitzdings/Blitzdings.pnproj |
|---|
| 0,0 → 1,0 |
| <Project name="Blitzdings"><File path="lprg.c"></File><File path="makefile"></File><File path="timer.c"></File><File path="timer.h"></File><File path="main.h"></File><File path="main.c"></File><File path="lprg.h"></File></Project> |
| /MikroBlink/Blitzdings/Blitzdings.pnps |
|---|
| 0,0 → 1,0 |
| <pd><ViewState><e p="Blitzdings" x="true"></e></ViewState></pd> |
| /MikroBlink/Blitzdings/Hexfiles/Blitzdings_MEGA8.hex |
|---|
| 0,0 → 1,84 |
| :100000004EC068C0CBC066C065C064C063C062C07B |
| :1000100061C08EC15FC05EC05DC05CC05BC05AC0C5 |
| :1000200059C058C057C0E5C0E6C0E7C0E8C0E9C045 |
| :10003000EAC0EBC0ECC0EDC0DAC0F5C0F6C0F7C056 |
| :10004000F8C0F9C0FAC0FBC0FCC0FDC0EAC05CC18A |
| :1000500058C15CC15BC15AC159C158C14FC156C1D9 |
| :1000600055C154C153C152C151C150C144C14EC107 |
| :100070004DC14CC13DC139C149C148C147C146C14B |
| :1000800031C144C143C12BC141C140C13FC13EC187 |
| :100090003DC13CC13BC13AC139C138C11DC1112468 |
| :1000A0001FBECFE5D4E0DEBFCDBF11E0A0E6B0E0DB |
| :1000B000E2E2F4E002C005900D92A435B107D9F751 |
| :1000C00011E0A4E5B1E001C01D92A438B107E1F749 |
| :1000D0001AD0A6C195CFE0915401F0915501EE0FD1 |
| :1000E000FF1FE75BFE4F80819181AFD0809154016B |
| :1000F00090915501019665E070E07ED19093550195 |
| :100100008093540108950F931F93CF93DF9385E05D |
| :1001100087BB8EE384BB80EF81BB939A80E88BBF63 |
| :1001200084E085BFC29885B385BB82B382BBC0988B |
| :100130003ED1D1DF80E197E240D18C0188EE93E09F |
| :100140003CD1EC0178948091820190918301892BBC |
| :10015000B1F4C8013BD18823D9F4CE0137D188232B |
| :1001600091F388B391E0892788BB88EE93E025D18D |
| :10017000EC018091820190918301892B51F31092BF |
| :1001800083011092820178D0C80120D1882329F3FD |
| :10019000A2DF80E197E211D18C01DFCF1F920F9295 |
| :1001A0000FB60F9211242F933F934F935F936F934A |
| :1001B0007F938F939F93AF93BF93EF93FF938BDFC7 |
| :1001C000FF91EF91BF91AF919F918F917F916F912F |
| :1001D0005F914F913F912F910F900FBE0F901F9005 |
| :1001E0001895FC010A9720F4ED5EFF4F0994979A49 |
| :1001F0000895C29A0895A99A0895AA9A0895AB9A63 |
| :100200000895AC9A0895AD9A0895949A0895959A90 |
| :100210000895969A0895FC010A9720F4E35EFF4F33 |
| :10022000099497980895C2980895A9980895AA984E |
| :100230000895AB980895AC980895AD980895949852 |
| :1002400008959598089596980895CF93DF93009711 |
| :1002500081F0E6E5F1E0DC01EF01649610821286A0 |
| :100260008D919D9189939993319681E0E036F807BD |
| :10027000A9F7DF91CF910895EF92FF920F931F930B |
| :10028000CF93DF93C6E5D1E084E1E82EF12CEC0EAC |
| :10029000FD1E00E010E003C08150888337C08881D4 |
| :1002A0008823D1F7F701A081B1818A85FD01E80F8C |
| :1002B000F11DE0818F5F8A87A80FB11D8C91882383 |
| :1002C00009F41A868E2F90E0FC01FA97E832F105C6 |
| :1002D000E8F4E95DFF4F0994C8019DDF17C081E391 |
| :1002E000888314C083E6888311C083E188830EC0AD |
| :1002F0008DE188830BC089E0888308C0C80171DF65 |
| :1003000005C084E0888302C081E088830F5F1F4FAF |
| :10031000219682E090E0E80EF91E0A30110509F0FE |
| :10032000BECFDF91CF911F910F91FF90EF90089575 |
| :100330001F920F920FB60F9211245F936F937F93CA |
| :100340008F939F93AF93BF93809181018F5F809331 |
| :100350008101809180018150809380018F3FD9F489 |
| :1003600083E08093800180917E0190917F010196CE |
| :1003700090937F0180937E0180917E0190917F0117 |
| :100380006AE070E039D0892B31F481E090E09093FD |
| :10039000830180938201BF91AF919F918F917F9153 |
| :1003A0006F915F910F900FBE0F901F90189582E094 |
| :1003B00083BF89B7816089BF089520917E01309104 |
| :1003C0007F0121503040820F931F089520917E01BC |
| :1003D00030917F01821B930B892F9927807890E0C1 |
| :1003E0000895CF93DF93E9DFEC01CE01EFDF88239F |
| :1003F000E1F3DF91CF910895AA1BBB1B51E107C028 |
| :10040000AA1FBB1FA617B70710F0A61BB70B881FA4 |
| :10041000991F5A95A9F780959095BC01CD01089533 |
| :02042000FFCF0C |
| :1004220041006100413A6149413A6149413A6153AF |
| :1004320056002E004E4E61494153534E4E4E004ED1 |
| :1004420061494153534E4E4E4E004E413A6149412D |
| :100452003A6149413A614D530061494153534E4E0D |
| :100462004E4E4E004E4E4E61494153534E4E006425 |
| :10047200007200740072007F008A0072009900729C |
| :1004820000A4006200620062006200620062006218 |
| :100492000062006200620060006000600060006054 |
| :1004A2000060006000600060006000614D414D002E |
| :1004B200EB00EB00EB00EB00EB00EB00EB00EB00E2 |
| :1004C200EB00EB00612E412E00613A413A00613BA4 |
| :1004D200413B006149414900614E414E00614D4935 |
| :1004E200414D490061564156006156494156490005 |
| :1004F2006153415300040109010E0113011801EB7C |
| :10050200001D01240129013001D700AF00C300F012 |
| :0405120000350100AF |
| :00000001FF |
| /MikroBlink/Blitzdings/lprg.c |
|---|
| 0,0 → 1,160 |
| /* |
| * lprg.c |
| * little LED lighting program interpreter |
| * (c) 2009 pangu |
| */ |
| #include "main.h" |
| #include "lprg.h" |
| static lprg lpg; |
| void LED_ON(int i) { |
| switch (i) { |
| case 0: |
| LED_1_ON; |
| break; |
| case 1: |
| LED_2_ON; |
| break; |
| case 2: |
| LED_3_ON; |
| break; |
| case 3: |
| LED_4_ON; |
| break; |
| case 4: |
| LED_5_ON; |
| break; |
| case 5: |
| LED_6_ON; |
| break; |
| case 6: |
| LED_7_ON; |
| break; |
| case 7: |
| LED_8_ON; |
| break; |
| case 8: |
| LED_9_ON; |
| break; |
| case 9: |
| LED_10_ON; |
| break; |
| } |
| } |
| void LED_OFF(int i) { |
| switch (i) { |
| case 0: |
| LED_1_OFF; |
| break; |
| case 1: |
| LED_2_OFF; |
| break; |
| case 2: |
| LED_3_OFF; |
| break; |
| case 3: |
| LED_4_OFF; |
| break; |
| case 4: |
| LED_5_OFF; |
| break; |
| case 5: |
| LED_6_OFF; |
| break; |
| case 6: |
| LED_7_OFF; |
| break; |
| case 7: |
| LED_8_OFF; |
| break; |
| case 8: |
| LED_9_OFF; |
| break; |
| case 9: |
| LED_10_OFF; |
| break; |
| } |
| } |
| void lprg_init(char *code[]) { |
| int i; |
| if(!code) return; // do nothing with no input |
| for(i=0; i<LEDCOUNT; i++) { |
| lpg.wait[i] = 0; |
| lpg.cur[i] = 0; |
| lpg.code[i] = code[i]; |
| } |
| } |
| void lprg_step(void) { // to be called every 10ms. perform next step in lighting prog |
| int i; |
| char a; |
| for(i=0;i<LEDCOUNT;i++) { |
| // need to wait? |
| if(lpg.wait[i]) { |
| lpg.wait[i]--; |
| continue; |
| } |
| // get current command |
| a = *(lpg.code[i]+lpg.cur[i]); |
| lpg.cur[i]++; |
| if(!lpg.code[i][lpg.cur[i]]) // wrap to start if commands for LED finished |
| lpg.cur[i] = 0; |
| // look at current char |
| switch(a) { |
| case 'A': // if its LED on, turn LED on |
| LED_ON(i); |
| break; |
| case 'a': // if its LED off, turn LED off |
| LED_OFF(i); |
| break; |
| // Wait flags: |
| // . 10 ms (. or any other char) |
| // : 20 ms |
| // ; 50 ms |
| // I 100 ms |
| // N 200 ms |
| // M 300 ms |
| // V 500 ms |
| // S 1s |
| case ':': |
| lpg.wait[i] = 1; |
| break; |
| case ';': |
| lpg.wait[i] = 4; |
| break; |
| case 'I': |
| lpg.wait[i] = 9; |
| break; |
| case 'N': |
| lpg.wait[i] = 19; |
| break; |
| case 'M': |
| lpg.wait[i] = 29; |
| break; |
| case 'V': |
| lpg.wait[i] = 49; |
| break; |
| case 'S': |
| lpg.wait[i] = 99; |
| break; |
| } |
| } |
| } |
| /MikroBlink/Blitzdings/lprg.h |
|---|
| 0,0 → 1,19 |
| /* |
| * lprg.h |
| * little LED lighting program interpreter |
| * (c) 2009 pangu |
| */ |
| #define LEDCOUNT 10 |
| typedef struct _lprg { |
| char wait[LEDCOUNT]; |
| char cur[LEDCOUNT]; |
| char *code[LEDCOUNT]; |
| } lprg; |
| extern void lprg_init(char *code[]); |
| extern void lprg_step(); |
| /MikroBlink/Blitzdings/main.c |
|---|
| 0,0 → 1,178 |
| /* |
| * Blitzdings main.c |
| * (c) pangu |
| */ |
| #include "main.h" |
| #include "timer.h" |
| #include "lprg.h" |
| /* Strings zum definieren von Dauer-Ein Dauer-Aus */ |
| const char l_on[]="A"; |
| const char l_off[]="a"; |
| // Wait flags: |
| // . 10 ms |
| // : 20 ms |
| // ; 50 ms |
| // I 100 ms |
| // N 200 ms |
| // M 300 ms |
| // V 500 ms |
| // S 1s |
| // LED: |
| // A-an a-aus |
| // Rot+Grün blitzen dreimal kurz, zeitlich leicht versetzt, alle 1,5s |
| // 2 weisse und 2 blaue LEDs sind an und gehen alle 3s reihum kurz aus |
| char *led_posflash[] = { |
| "A:aIA:aIA:aSV", // LED #1 rot |
| ".", // LED #2 |
| "NNaIASSNNN", // LED #3 blau |
| ".", // LED #4 |
| "NaIASSNNNN", // LED #5 weiss |
| "NA:aIA:aIA:aMS", // LED #6 grün |
| ".", // LED #7 |
| "aIASSNNNNN", // LED #8 weiss |
| ".", // LED #9 |
| "NNNaIASSNN" // LED #10 blau |
| }; |
| char *led_aus[] = { |
| l_off, // LED #1 rot |
| l_off, // LED #2 blau |
| l_off, // LED #3 blau |
| l_off, // LED #4 |
| l_off, // LED #5 weiss |
| l_off, // LED #6 grün |
| l_off, // LED #7 |
| l_off, // LED #8 weiss |
| l_off, // LED #9 |
| l_off // LED #10 |
| }; |
| char *led_an[] = { |
| l_on, // LED #1 rot |
| l_on, // LED #2 blau |
| l_on, // LED #3 blau |
| l_on, // LED #4 |
| l_on, // LED #5 weiss |
| l_on, // LED #6 grün |
| l_on, // LED #7 |
| l_on, // LED #8 weiss |
| l_on, // LED #9 |
| l_on // LED #10 |
| }; |
| // alle LEDs toggeln synchron, 300ms Leucht/Aus-Dauer |
| char *led_flash1[] = { |
| "aMAM", // LED #1 rot |
| "aMAM", // LED #2 blau |
| "aMAM", // LED #3 blau |
| "aMAM", // LED #4 |
| "aMAM", // LED #5 weiss |
| "aMAM", // LED #6 grün |
| "aMAM", // LED #7 |
| "aMAM", // LED #8 weiss |
| "aMAM", // LED #9 |
| "aMAM" // LED #10 |
| }; |
| // alle LEDs toggeln mit verschiednen Zykluszeiten |
| char *led_flash2[] = { |
| "a.A.", // LED #1 rot |
| "a:A:", // LED #2 blau |
| "a;A;", // LED #3 blau |
| "aIAI", // LED #4 |
| "aNAN", // LED #5 weiss |
| "aMAM", // LED #6 grün |
| "aMIAMI", // LED #7 |
| "aVAV", // LED #8 weiss |
| "aVIAVI", // LED #9 |
| "aSAS" // LED #10 |
| }; |
| // Hier die zu verwendenden LichtProgramme einfach eintragen. |
| void *modes[]= { led_an, led_posflash, led_aus, led_flash1, led_flash2 }; |
| void nextMode() { |
| static int current = 0; |
| lprg_init(modes[current]); |
| current = ++current % (sizeof(modes)/sizeof(void *)); |
| } |
| ISR(INT1_vect) |
| { |
| nextMode(); |
| } |
| int main() { |
| int tim10s, tim1s; |
| // Ports einstellen |
| // Pin B |7|6|5|4|3|2|1|0 |
| // Binär:|0|0|0|0|0|1|0|1 (b) => #05 (h) |
| // Pin B0 und B2 als Ausgänge festlegen |
| DDRB = 0x05; |
| // Pin C |7|6|5|4|3|2|1|0 |
| // Binär:|0|0|1|1|1|1|1|0 (b) => #3E (h) |
| // Pin C1 bis C5 als Ausgänge festlegen |
| DDRC = 0x3E; |
| // Pin D |7|6|5|4|3|2|1|0 |
| // Binär:|1|1|1|1|0|0|0|0 (b) => #F0 (h) |
| DDRD = 0xF0; |
| //Pullup für PD3 aktivieren |
| PORTD |= (1 << PD3); |
| //interrupt konfigurueren |
| GIMSK = 1<<INT1; |
| MCUCR = 1<<ISC10; |
| ALLES_OFF; |
| STATUS_ON; |
| Timer_Init(); |
| nextMode(); |
| tim10s = SetDelay(10000); |
| tim1s = SetDelay(1000); |
| sei(); //interrupts einschalten |
| while (1) { |
| if(flag10ms) { // every 10ms |
| flag10ms = 0; |
| lprg_step(); // next step in light prog |
| } |
| if(CheckDelay(tim10s)) { // alle 10 sec programm wechseln |
| nextMode(); |
| tim10s = SetDelay(10000); |
| } |
| if(CheckDelay(tim1s)) { // alle 1 sec STatus-LED toggeln |
| STATUS_TOGGLE; |
| tim1s = SetDelay(1000); |
| } |
| } |
| } |
| /MikroBlink/Blitzdings/main.h |
|---|
| 0,0 → 1,50 |
| #include <avr/io.h> |
| #include <util/delay.h> |
| #include <stdint.h> |
| #include <avr/interrupt.h> |
| #include "timer.h" |
| #define LED_1 PB2 // LED port 1 |
| #define LED_2 PC1 // LED port 2 |
| #define LED_3 PC2 // LED port 3 |
| #define LED_4 PC3 // LED port 4 |
| #define LED_5 PC4 // LED port 5 |
| #define LED_6 PC5 // LED port 6 |
| #define LED_7 PD4 // LED port 7 |
| #define LED_8 PD5 // LED port 8 |
| #define LED_9 PD6 // LED port 9 |
| #define LED_10 PD7 // LED port 10 |
| #define LED_STATUS PB0 // LED blau - on board |
| #define STATUS_OFF PORTB |= (1<<LED_STATUS) //Den Portpin auf high setzen |
| #define STATUS_ON PORTB &= ~(1<<LED_STATUS) //Den Portpin auf low setzen |
| #define STATUS_TOGGLE PORTB ^= (1<<LED_STATUS) //Den Portpin toggeln |
| #define LED_1_ON PORTB |= (1<<LED_1) //Den Portpin auf high setzen |
| #define LED_1_OFF PORTB &= ~(1<<LED_1) //Den Portpin auf low setzen |
| #define LED_2_ON PORTC |= (1<<LED_2) //Den Portpin auf high setzen |
| #define LED_2_OFF PORTC &= ~(1<<LED_2) //Den Portpin auf low setzen |
| #define LED_3_ON PORTC |= (1<<LED_3) //Den Portpin auf high setzen |
| #define LED_3_OFF PORTC &= ~(1<<LED_3) //Den Portpin auf low setzen |
| #define LED_4_ON PORTC |= (1<<LED_4) //Den Portpin auf high setzen |
| #define LED_4_OFF PORTC &= ~(1<<LED_4) //Den Portpin auf low setzen |
| #define LED_5_ON PORTC |= (1<<LED_5) //Den Portpin auf high setzen |
| #define LED_5_OFF PORTC &= ~(1<<LED_5) //Den Portpin auf low setzen |
| #define LED_6_ON PORTC |= (1<<LED_6) |
| #define LED_6_OFF PORTC &= ~(1<<LED_6) |
| #define LED_7_ON PORTD |= (1<<LED_7) |
| #define LED_7_OFF PORTD &= ~(1<<LED_7) |
| #define LED_8_ON PORTD |= (1<<LED_8) |
| #define LED_8_OFF PORTD &= ~(1<<LED_8) |
| #define LED_9_ON PORTD |= (1<<LED_9) |
| #define LED_9_OFF PORTD &= ~(1<<LED_9) |
| #define LED_10_ON PORTD |= (1<<LED_10) |
| #define LED_10_OFF PORTD &= ~(1<<LED_10) |
| #define ALLES_OFF LED_1_OFF;PORTC &= ~(1<<LED_2 & 1<<LED_3 & 1<<LED_4 & 1<<LED_5);PORTD &= ~(1<<LED_6 & 1<<LED_7 & 1<<LED_8 & 1<<LED_9 & 1<<LED_10); |
| #define ALLES_ON LED_1_ON;PORTC |= (1<<LED_2 & 1<<LED_3 & 1<<LED_4 & 1<<LED_5);PORTD |= (1<<LED_6 & 1<<LED_7 & 1<<LED_8 & 1<<LED_9 & 1<<LED_10); |
| /MikroBlink/Blitzdings/makefile |
|---|
| 0,0 → 1,420 |
| # WinAVR Sample makefile written by Eric B. Weddington, Jörg Wunsch, et al. |
| # Released to the Public Domain |
| # Please read the make user manual! |
| # |
| # Additional material for this makefile was submitted by: |
| # Tim Henigan |
| # Peter Fleury |
| # Reiner Patommel |
| # Sander Pool |
| # Frederik Rouleau |
| # Markus Pfaff |
| # |
| # On command line: |
| # |
| # make all = Make software. |
| # |
| # make clean = Clean out built project files. |
| # |
| # make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB). |
| # |
| # make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio |
| # 4.07 or greater). |
| # |
| # make program = Download the hex file to the device, using avrdude. Please |
| # customize the avrdude settings below first! |
| # |
| # make filename.s = Just compile filename.c into the assembler code only |
| # |
| # To rebuild project do "make clean" then "make all". |
| # |
| # MCU name |
| MCU = atmega8 |
| F_CPU = 8000000UL |
| #Fuse settings for ATmega8 |
| ifeq ($(MCU), atmega8) |
| FUSE_BITS = -u -U lfuse:w:0xff:m -U hfuse:w:0xdf:m |
| HEX_FILE_NAME = MEGA8 |
| endif |
| # Output format. (can be srec, ihex, binary) |
| FORMAT = ihex |
| # Target file name (without extension). |
| TARGET = Hexfiles/Blitzdings_$(HEX_FILE_NAME) |
| # Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization. |
| # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
| OPT = 2 |
| # If there is more than one source file, append them above, or modify and |
| # uncomment the following: |
| SRC = main.c lprg.c timer.c |
| # List Assembler source files here. |
| # Make them always end in a capital .S. Files ending in a lowercase .s |
| # will not be considered source files but generated files (assembler |
| # output from the compiler), and will be deleted upon "make clean"! |
| # Even though the DOS/Win* filesystem matches both .s and .S the same, |
| # it will preserve the spelling of the filenames, and gcc itself does |
| # care about how the name is spelled on its command-line. |
| ASRC = |
| # List any extra directories to look for include files here. |
| # Each directory must be seperated by a space. |
| EXTRAINCDIRS = |
| # Optional compiler flags. |
| # -g: generate debugging information (for GDB, or for COFF conversion) |
| # -O*: optimization level |
| # -f...: tuning, see gcc manual and avr-libc documentation |
| # -Wall...: warning level |
| # -Wa,...: tell GCC to pass this to the assembler. |
| # -ahlms: create assembler listing |
| CFLAGS = -g -O$(OPT) \ |
| -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums \ |
| -Wall -Wstrict-prototypes \ |
| -Wa,-adhlns=$(<:.c=.lst) \ |
| $(patsubst %,-I%,$(EXTRAINCDIRS)) |
| # Set a "language standard" compiler flag. |
| # Unremark just one line below to set the language standard to use. |
| # gnu99 = C99 + GNU extensions. See GCC manual for more information. |
| #CFLAGS += -std=c89 |
| #CFLAGS += -std=gnu89 |
| #CFLAGS += -std=c99 |
| CFLAGS += -std=gnu99 |
| CFLAGS += -DF_CPU=$(F_CPU) |
| # Optional assembler flags. |
| # -Wa,...: tell GCC to pass this to the assembler. |
| # -ahlms: create listing |
| # -gstabs: have the assembler create line number information; note that |
| # for use in COFF files, additional information about filenames |
| # and function names needs to be present in the assembler source |
| # files -- see avr-libc docs [FIXME: not yet described there] |
| ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs |
| # Optional linker flags. |
| # -Wl,...: tell GCC to pass this to linker. |
| # -Map: create map file |
| # --cref: add cross reference to map file |
| LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
| # Additional libraries |
| # Minimalistic printf version |
| #LDFLAGS += -Wl,-u,vfprintf -lprintf_min |
| # Floating point printf version (requires -lm below) |
| #LDFLAGS += -Wl,-u,vfprintf -lprintf_flt |
| # -lm = math library |
| LDFLAGS += -lm |
| # Programming support using avrdude. Settings and variables. |
| # Programming hardware: alf avr910 avrisp bascom bsd |
| # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 |
| # |
| # Type: avrdude -c ? |
| # to get a full listing. |
| # |
| #AVRDUDE_PROGRAMMER = AVR910 |
| #AVRDUDE_PROGRAMMER = stk300 |
| #AVRDUDE_PROGRAMMER = USBasp |
| #AVRDUDE_PROGRAMMER = dt006 |
| #AVRDUDE_PROGRAMMER = bascom |
| AVRDUDE_PROGRAMMER = siprog |
| #AVRDUDE_PROGRAMMER = avrisp2 |
| #AVRDUDE_PROGRAMMER = AVRISPMKII |
| #AVRDUDE_PORT = usb # programmer connected to USB port |
| AVRDUDE_PORT = com2 # programmer connected to serial device |
| #AVRDUDE_PORT = lpt1 # programmer connected to parallel port |
| AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex $(FUSE_BITS) |
| #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
| #AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -b 115200 -c $(AVRDUDE_PROGRAMMER) |
| AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
| # Uncomment the following if you want avrdude's erase cycle counter. |
| # Note that this counter needs to be initialized first using -Yn, |
| # see avrdude manual. |
| #AVRDUDE_ERASE += -y |
| # Uncomment the following if you do /not/ wish a verification to be |
| # performed after programming the device. |
| #AVRDUDE_FLAGS += -V |
| # Increase verbosity level. Please use this when submitting bug |
| # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
| # to submit bug reports. |
| #AVRDUDE_FLAGS += -v -v |
| # --------------------------------------------------------------------------- |
| # Define directories, if needed. |
| DIRAVR = c:/winavr |
| DIRAVRBIN = $(DIRAVR)/bin |
| DIRAVRUTILS = $(DIRAVR)/utils/bin |
| DIRINC = . |
| DIRLIB = $(DIRAVR)/avr/lib |
| # Define programs and commands. |
| SHELL = sh |
| CC = avr-gcc |
| OBJCOPY = avr-objcopy |
| OBJDUMP = avr-objdump |
| SIZE = avr-size |
| # Programming support using avrdude. |
| AVRDUDE = avrdude |
| REMOVE = rm -f |
| COPY = cp |
| HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
| ELFSIZE = $(SIZE) -A $(TARGET).elf |
| # Define Messages |
| # English |
| MSG_ERRORS_NONE = Errors: none |
| MSG_BEGIN = -------- begin -------- |
| MSG_END = -------- end -------- |
| MSG_SIZE_BEFORE = Size before: |
| MSG_SIZE_AFTER = Size after: |
| MSG_COFF = Converting to AVR COFF: |
| MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
| MSG_FLASH = Creating load file for Flash: |
| MSG_EEPROM = Creating load file for EEPROM: |
| MSG_EXTENDED_LISTING = Creating Extended Listing: |
| MSG_SYMBOL_TABLE = Creating Symbol Table: |
| MSG_LINKING = Linking: |
| MSG_COMPILING = Compiling: |
| MSG_ASSEMBLING = Assembling: |
| MSG_CLEANING = Cleaning project: |
| # Define all object files. |
| OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) |
| # Define all listing files. |
| LST = $(ASRC:.S=.lst) $(SRC:.c=.lst) |
| # Combine all necessary flags and optional flags. |
| # Add target processor to flags. |
| ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) |
| ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
| # Default target. |
| all: begin gccversion sizebefore $(TARGET).elf $(TARGET).hex $(TARGET).eep \ |
| $(TARGET).lss $(TARGET).sym sizeafter finished end |
| # Eye candy. |
| # AVR Studio 3.x does not check make's exit code but relies on |
| # the following magic strings to be generated by the compile job. |
| begin: |
| @echo |
| @echo $(MSG_BEGIN) |
| finished: |
| @echo $(MSG_ERRORS_NONE) |
| end: |
| @echo $(MSG_END) |
| @echo |
| # Display size of file. |
| sizebefore: |
| @if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi |
| sizeafter: |
| @if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi |
| # Display compiler version information. |
| gccversion : |
| @$(CC) --version |
| # Convert ELF to COFF for use in debugging / simulating in |
| # AVR Studio or VMLAB. |
| COFFCONVERT=$(OBJCOPY) --debugging \ |
| --change-section-address .data-0x800000 \ |
| --change-section-address .bss-0x800000 \ |
| --change-section-address .noinit-0x800000 \ |
| --change-section-address .eeprom-0x810000 |
| coff: $(TARGET).elf |
| @echo |
| @echo $(MSG_COFF) $(TARGET).cof |
| $(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
| extcoff: $(TARGET).elf |
| @echo |
| @echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
| $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
| # Program the device. |
| program: $(TARGET).hex $(TARGET).eep |
| $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
| # Create final output files (.hex, .eep) from ELF output file. |
| %.hex: %.elf |
| @echo |
| @echo $(MSG_FLASH) $@ |
| $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ |
| %.eep: %.elf |
| @echo |
| @echo $(MSG_EEPROM) $@ |
| -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
| --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ |
| # Create extended listing file from ELF output file. |
| %.lss: %.elf |
| @echo |
| @echo $(MSG_EXTENDED_LISTING) $@ |
| $(OBJDUMP) -h -S $< > $@ |
| # Create a symbol table from ELF output file. |
| %.sym: %.elf |
| @echo |
| @echo $(MSG_SYMBOL_TABLE) $@ |
| avr-nm -n $< > $@ |
| # Link: create ELF output file from object files. |
| .SECONDARY : $(TARGET).elf |
| .PRECIOUS : $(OBJ) |
| %.elf: $(OBJ) |
| @echo |
| @echo $(MSG_LINKING) $@ |
| $(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) |
| # Compile: create object files from C source files. |
| %.o : %.c |
| @echo |
| @echo $(MSG_COMPILING) $< |
| $(CC) -c $(ALL_CFLAGS) $< -o $@ |
| # Compile: create assembler files from C source files. |
| %.s : %.c |
| $(CC) -S $(ALL_CFLAGS) $< -o $@ |
| # Assemble: create object files from assembler source files. |
| %.o : %.S |
| @echo |
| @echo $(MSG_ASSEMBLING) $< |
| $(CC) -c $(ALL_ASFLAGS) $< -o $@ |
| # Target: clean project. |
| clean: begin clean_list finished end |
| clean_list : |
| @echo |
| @echo $(MSG_CLEANING) |
| # $(REMOVE) $(TARGET).hex |
| $(REMOVE) $(TARGET).eep |
| $(REMOVE) $(TARGET).obj |
| $(REMOVE) $(TARGET).cof |
| $(REMOVE) $(TARGET).elf |
| $(REMOVE) $(TARGET).map |
| $(REMOVE) $(TARGET).obj |
| $(REMOVE) $(TARGET).a90 |
| $(REMOVE) $(TARGET).sym |
| $(REMOVE) $(TARGET).lnk |
| $(REMOVE) $(TARGET).lss |
| $(REMOVE) $(OBJ) |
| $(REMOVE) $(LST) |
| $(REMOVE) $(SRC:.c=.s) |
| $(REMOVE) $(SRC:.c=.d) |
| # Automatically generate C source code dependencies. |
| # (Code originally taken from the GNU make user manual and modified |
| # (See README.txt Credits).) |
| # |
| # Note that this will work with sh (bash) and sed that is shipped with WinAVR |
| # (see the SHELL variable defined above). |
| # This may not work with other shells or other seds. |
| # |
| %.d: %.c |
| set -e; $(CC) -MM $(ALL_CFLAGS) $< \ |
| | sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > $@; \ |
| [ -s $@ ] || rm -f $@ |
| # Remove the '-' if you want to see the dependency files generated. |
| -include $(SRC:.c=.d) |
| # Listing of phony targets. |
| .PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \ |
| clean clean_list program |
| /MikroBlink/Blitzdings/timer.c |
|---|
| 0,0 → 1,60 |
| /***************************************************************************** |
| *****************************************************************************/ |
| #include "main.h" |
| volatile unsigned int CountMilliseconds = 0; |
| volatile unsigned char Timer0Overflow; |
| volatile unsigned int flag10ms; |
| enum { |
| STOP = 0, |
| CK = 1, |
| CK8 = 2, |
| CK64 = 3, |
| CK256 = 4, |
| CK1024 = 5, |
| T0_FALLING_EDGE = 6, |
| T0_RISING_EDGE = 7 |
| }; |
| SIGNAL(SIG_OVERFLOW0) |
| { |
| static unsigned char cnt=0; |
| Timer0Overflow++; |
| if(!cnt--) |
| { |
| cnt = 3; |
| CountMilliseconds += 1; |
| if(!(CountMilliseconds % 10)) { |
| flag10ms = 1; |
| } |
| } |
| } |
| void Timer_Init(void) |
| { |
| TCCR0 = CK8; |
| TIM0_START; |
| } |
| unsigned int SetDelay(unsigned int t) |
| { |
| return(CountMilliseconds + t - 1); |
| } |
| char CheckDelay (unsigned int t) |
| { |
| return(((t - CountMilliseconds) & 0x8000) >> 8); |
| } |
| void Delay_ms(unsigned int w) |
| { |
| unsigned int akt; |
| akt = SetDelay(w); |
| while (!CheckDelay(akt)); |
| } |
| /MikroBlink/Blitzdings/timer.h |
|---|
| 0,0 → 1,35 |
| #if defined (__AVR_ATmega8__) |
| #define TIMER_TEILER CK8 |
| //#define TIMER_RELOAD_VALUE 125 |
| #endif |
| #define INT0_ENABLE GIMSK |= 0x40 |
| #define INT0_DISABLE GIMSK &= ~0x40 |
| #define TIM0_START TIMSK |= 0x01 |
| #define TIM0_STOPP TIMSK &= ~0x01 |
| #define ICP_INT_ENABLE TIMSK |= 0x20 |
| #define ICP_INT_DISABLE TIMSK &= ~0x20 |
| #define TIMER1_INT_ENABLE TIMSK |= 0x04 |
| #define TIMER1_INT_DISABLE TIMSK &= ~0x04 |
| #define TIMER2_INT_ENABLE TIMSK |= 0x40 |
| #define TIMER2_INT_DISABLE TIMSK &= ~0x40 |
| #define INT0_POS_FLANKE MCUCR |= 0x01 |
| #define INT0_ANY_FLANKE MCUCR |= 0x01 |
| #define INT0_NEG_FLANKE MCUCR &= ~0x01 |
| #define CLR_INT0_FLAG GIFR &= ~0x40 |
| #define INIT_INT0_FLANKE MCUCR &= ~0x03; MCUCR |= 0x02; |
| #define TIMER0_PRESCALER TCCR0 |
| #define ICP_POS_FLANKE TCCR1B |= (1<<ICES1) |
| #define ICP_NEG_FLANKE TCCR1B &= ~(1<<ICES1) |
| extern volatile unsigned int CountMilliseconds; |
| extern volatile unsigned char Timer0Overflow; |
| extern volatile unsigned int flag10ms; |
| void Timer_Init(void); |
| void Delay_ms(unsigned int); |
| unsigned int SetDelay (unsigned int t); |
| char CheckDelay (unsigned int t); |