| 33,7 → 33,7 |
|---|
| |
| Instructions: |
| Connect the "To FC" port from EPi-OSD to the Debug port of the NaviCtrl. |
| You will need at least NaviCtrl 0.18c soft to fully enjoy the software. |
| You will need at least NaviCtrl 0.24b soft to fully enjoy the software. |
| |
| S1 enters a menu where you can cycle through using S2 and toggle/accept choice with S1 |
| |
| 49,7 → 49,7 |
|---|
| FAQ: |
| http://www.mylifesucks.de/oss/c-osd/#FAQ |
| |
| How To Flash the software (the MK-user way): |
| How to flash the software (the MK-user way): |
| Requirements: |
| - Windows PC with a real SerialPort |
| - PonyProg (http://www.LancOS.com) |
| 66,4 → 66,18 |
|---|
| - Open the .hex file and Writa All (Ctrl+W) |
| - Hopefully done :) |
| |
| How to flash the software with avrdude: |
| Requirements: |
| - ISP-Programmer which is supported by avrdude (SerCon, usbasp, AVRISP-MKII and so on...) |
| - avrdude |
| HowTo: |
| - assuming your ISP programmer is a usbasp compatible connected via usb |
| - fuses: |
| avrdude -c usbasp -P usb -p m162 -u -v -U lfuse:w:0xff:m -U hfuse:w:0xD7:m -U efuse:w:0xFB:m |
| - firmware: |
| avrdude -c usbasp -P usb -p m162 -u -U flash:w:C-OSD-######.hex |
| - for serial port programming using the SerCon |
| avrdude -p m162 -c siprog -P COM1 *****************look above***************** |
| |
| |
| #EOF |