Subversion Repositories BL-Ctrl

Compare Revisions

Ignore whitespace Rev 90 → Rev 92

/tags/V0.31/BLMC.c
2,7 → 2,7
+ Regler für Brushless-Motoren
+ ATMEGA8 mit 8MHz
+ (c) 01.2007 Holger Buss
+ Nur für den privaten Gebrauch
+ Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
+ Keine Garantie auf Fehlerfreiheit
+ Kommerzielle Nutzung nur mit meiner Zustimmung
+ Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.31/PPM_Decode.c
2,7 → 2,7
+ Regler für Brushless-Motoren
+ ATMEGA8 mit 8MHz
+ (c) 01.2007 Holger Buss
+ Nur für den privaten Gebrauch
+ Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
+ Keine Garantie auf Fehlerfreiheit
+ Kommerzielle Nutzung nur mit meiner Zustimmung
+ Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.31/main.c
2,7 → 2,7
+ Regler für Brushless-Motoren
+ ATMEGA8 mit 8MHz
+ (c) 01.2007 Holger Buss
+ Nur für den privaten Gebrauch
+ Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
+ Keine Garantie auf Fehlerfreiheit
+ Kommerzielle Nutzung nur mit meiner Zustimmung
+ Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.31/uart.c
2,7 → 2,7
// + Regler für Brushless-Motoren
// + ATMEGA8 mit 8MHz
// + (c) 01.2007 Holger Buss
// + Nur für den privaten Gebrauch
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + Keine Garantie auf Fehlerfreiheit
// + Kommerzielle Nutzung nur mit meiner Zustimmung
// + Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.33/BLMC.c
2,7 → 2,7
+ Regler für Brushless-Motoren
+ ATMEGA8 mit 8MHz
+ (c) 01.2007 Holger Buss
+ Nur für den privaten Gebrauch
+ Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
+ Keine Garantie auf Fehlerfreiheit
+ Kommerzielle Nutzung nur mit meiner Zustimmung
+ Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.33/PPM_Decode.c
2,7 → 2,7
+ Regler für Brushless-Motoren
+ ATMEGA8 mit 8MHz
+ (c) 01.2007 Holger Buss
+ Nur für den privaten Gebrauch
+ Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
+ Keine Garantie auf Fehlerfreiheit
+ Kommerzielle Nutzung nur mit meiner Zustimmung
+ Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.33/main.c
2,7 → 2,7
+ Regler für Brushless-Motoren
+ ATMEGA8 mit 8MHz
+ (c) 01.2007 Holger Buss
+ Nur für den privaten Gebrauch
+ Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
+ Keine Garantie auf Fehlerfreiheit
+ Kommerzielle Nutzung nur mit meiner Zustimmung
+ Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.33/uart.c
2,7 → 2,7
// + Regler für Brushless-Motoren
// + ATMEGA8 mit 8MHz
// + (c) 01.2007 Holger Buss
// + Nur für den privaten Gebrauch
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + Keine Garantie auf Fehlerfreiheit
// + Kommerzielle Nutzung nur mit meiner Zustimmung
// + Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.35/BLMC.c
2,7 → 2,7
+ Regler für Brushless-Motoren
+ ATMEGA8 mit 8MHz
+ (c) 01.2007 Holger Buss
+ Nur für den privaten Gebrauch
+ Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
+ Keine Garantie auf Fehlerfreiheit
+ Kommerzielle Nutzung nur mit meiner Zustimmung
+ Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.35/PPM_Decode.c
2,7 → 2,7
+ Regler für Brushless-Motoren
+ ATMEGA8 mit 8MHz
+ (c) 01.2007 Holger Buss
+ Nur für den privaten Gebrauch
+ Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
+ Keine Garantie auf Fehlerfreiheit
+ Kommerzielle Nutzung nur mit meiner Zustimmung
+ Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.35/main.c
2,7 → 2,7
+ Regler für Brushless-Motoren
+ ATMEGA8 mit 8MHz
+ (c) 01.2007 Holger Buss
+ Nur für den privaten Gebrauch
+ Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
+ Keine Garantie auf Fehlerfreiheit
+ Kommerzielle Nutzung nur mit meiner Zustimmung
+ Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.35/uart.c
2,7 → 2,7
// + Regler für Brushless-Motoren
// + ATMEGA8 mit 8MHz
// + (c) 01.2007 Holger Buss
// + Nur für den privaten Gebrauch
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + Keine Garantie auf Fehlerfreiheit
// + Kommerzielle Nutzung nur mit meiner Zustimmung
// + Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.36/BLMC.c
4,7 → 4,7
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Regler für Brushless-Motoren
// + ATMEGA8 mit 8MHz
// + Nur für den privaten Gebrauch
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + Copyright (c) 12.2007 Holger Buss
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
26,7 → 26,7
// + Benutzung auf eigene Gefahr
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zulässig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
41,7 → 41,7
// + with our written permission
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
// + clearly linked as origin
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed
// + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
/tags/V0.36/PPM_Decode.c
2,7 → 2,7
+ Regler für Brushless-Motoren
+ ATMEGA8 mit 8MHz
+ (c) 01.2007 Holger Buss
+ Nur für den privaten Gebrauch
+ Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
+ Keine Garantie auf Fehlerfreiheit
+ Kommerzielle Nutzung nur mit meiner Zustimmung
+ Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.36/main.c
4,7 → 4,7
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Regler für Brushless-Motoren
// + ATMEGA8 mit 8MHz
// + Nur für den privaten Gebrauch
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + Copyright (c) 12.2007 Holger Buss
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
26,7 → 26,7
// + Benutzung auf eigene Gefahr
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zulässig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
41,7 → 41,7
// + with our written permission
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
// + clearly linked as origin
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed
// + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
/tags/V0.36/uart.c
2,7 → 2,7
// + Regler für Brushless-Motoren
// + ATMEGA8 mit 8MHz
// + (c) 01.2007 Holger Buss
// + Nur für den privaten Gebrauch
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + Keine Garantie auf Fehlerfreiheit
// + Kommerzielle Nutzung nur mit meiner Zustimmung
// + Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.37/BLMC.c
4,7 → 4,7
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Regler für Brushless-Motoren
// + ATMEGA8 mit 8MHz
// + Nur für den privaten Gebrauch
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + Copyright (c) 12.2007 Holger Buss
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
26,7 → 26,7
// + Benutzung auf eigene Gefahr
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zulässig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
41,7 → 41,7
// + with our written permission
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
// + clearly linked as origin
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed
// + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
/tags/V0.37/PPM_Decode.c
2,7 → 2,7
+ Regler für Brushless-Motoren
+ ATMEGA8 mit 8MHz
+ (c) 01.2007 Holger Buss
+ Nur für den privaten Gebrauch
+ Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
+ Keine Garantie auf Fehlerfreiheit
+ Kommerzielle Nutzung nur mit meiner Zustimmung
+ Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.37/main.c
4,7 → 4,7
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Regler für Brushless-Motoren
// + ATMEGA8 mit 8MHz
// + Nur für den privaten Gebrauch
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + Copyright (c) 12.2007 Holger Buss
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
26,7 → 26,7
// + Benutzung auf eigene Gefahr
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zulässig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
41,7 → 41,7
// + with our written permission
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
// + clearly linked as origin
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed
// + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
/tags/V0.37/uart.c
2,7 → 2,7
// + Regler für Brushless-Motoren
// + ATMEGA8 mit 8MHz
// + (c) 01.2007 Holger Buss
// + Nur für den privaten Gebrauch
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + Keine Garantie auf Fehlerfreiheit
// + Kommerzielle Nutzung nur mit meiner Zustimmung
// + Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.41/BLMC.c
4,7 → 4,7
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Regler für Brushless-Motoren
// + ATMEGA8 mit 8MHz
// + Nur für den privaten Gebrauch
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + Copyright (c) 12.2007 Holger Buss
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
26,7 → 26,7
// + Benutzung auf eigene Gefahr
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zulässig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
41,7 → 41,7
// + with our written permission
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
// + clearly linked as origin
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed
// + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
/tags/V0.41/PPM_Decode.c
2,7 → 2,7
+ Regler für Brushless-Motoren
+ ATMEGA8 mit 8MHz
+ (c) 01.2007 Holger Buss
+ Nur für den privaten Gebrauch
+ Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
+ Keine Garantie auf Fehlerfreiheit
+ Kommerzielle Nutzung nur mit meiner Zustimmung
+ Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.41/main.c
4,7 → 4,7
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Regler für Brushless-Motoren
// + ATMEGA8 mit 8MHz
// + Nur für den privaten Gebrauch
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + Copyright (c) 12.2007 Holger Buss
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
26,7 → 26,7
// + Benutzung auf eigene Gefahr
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zulässig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
41,7 → 41,7
// + with our written permission
// + * If sources or documentations are redistributet on other webpages, our webpage (http://www.MikroKopter.de) must be
// + clearly linked as origin
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed
// + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
/tags/V0.41/uart.c
2,7 → 2,7
// + Regler für Brushless-Motoren
// + ATMEGA8 mit 8MHz
// + (c) 01.2007 Holger Buss
// + Nur für den privaten Gebrauch
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + Keine Garantie auf Fehlerfreiheit
// + Kommerzielle Nutzung nur mit meiner Zustimmung
// + Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.42/BLMC.c
4,7 → 4,7
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Regler für Brushless-Motoren
// + ATMEGA8 mit 8MHz
// + Nur für den privaten Gebrauch
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + Copyright (c) 12.2007 Holger Buss
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
26,7 → 26,7
// + Benutzung auf eigene Gefahr
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zulässig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
41,7 → 41,7
// + with our written permission
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
// + clearly linked as origin
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed
// + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
/tags/V0.42/PPM_Decode.c
2,7 → 2,7
+ Regler für Brushless-Motoren
+ ATMEGA8 mit 8MHz
+ (c) 01.2007 Holger Buss
+ Nur für den privaten Gebrauch
+ Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
+ Keine Garantie auf Fehlerfreiheit
+ Kommerzielle Nutzung nur mit meiner Zustimmung
+ Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden
/tags/V0.42/main.c
4,7 → 4,7
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Regler für Brushless-Motoren
// + ATMEGA8 mit 8MHz
// + Nur für den privaten Gebrauch
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + Copyright (c) 12.2007 Holger Buss
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
26,7 → 26,7
// + Benutzung auf eigene Gefahr
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zulässig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
41,7 → 41,7
// + with our written permission
// + * If sources or documentations are redistributet on other webpages, our webpage (http://www.MikroKopter.de) must be
// + clearly linked as origin
// + * porting to systems other than hardware from www.mikrokopter.de is not allowed
// + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
/tags/V0.42/uart.c
2,7 → 2,7
// + Regler für Brushless-Motoren
// + ATMEGA8 mit 8MHz
// + (c) 01.2007 Holger Buss
// + Nur für den privaten Gebrauch
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + Keine Garantie auf Fehlerfreiheit
// + Kommerzielle Nutzung nur mit meiner Zustimmung
// + Der Code ist für die Hardware BL_Ctrl V1.0 entwickelt worden