0,0 → 1,144 |
/*#######################################################################################*/ |
/* !!! THIS IS NOT FREE SOFTWARE !!! */ |
/*#######################################################################################*/ |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Copyright (c) 2008 Ingo Busker, Holger Buss |
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY |
// + FOR NON COMMERCIAL USE ONLY |
// + www.MikroKopter.com |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist. |
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
// + bzgl. der Nutzungsbedingungen aufzunehmen. |
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
// + Verkauf von Luftbildaufnahmen, usw. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
// + eindeutig als Ursprung verlinkt werden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
// + Benutzung auf eigene Gefahr |
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
// + mit unserer Zustimmung zulässig |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
// + this list of conditions and the following disclaimer. |
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
// + from this software without specific prior written permission. |
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permitted |
// + for non-commercial use (directly or indirectly) |
// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
// + with our written permission |
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
// + clearly linked as origin |
// + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed |
// |
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
// + POSSIBILITY OF SUCH DAMAGE. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "91x_lib.h" |
#include "uart1.h" |
#include "analog.h" |
#include "timer1.h" |
#include "config.h" |
|
AnalogData_t AnalogData; |
|
void ADC_IRQHandler(void) |
{ |
IENABLE; |
|
if(ADC_GetFlagStatus(ADC_FLAG_ECV) == SET) |
{ |
ADC_ClearFlag(ADC_FLAG_ECV); |
AnalogData.Ch1 = ADC_GetConversionValue(ADC_Channel_1); |
AnalogData.Ch2 = ADC_GetConversionValue(ADC_Channel_2); |
AnalogData.Ch3 = ADC_GetConversionValue(ADC_Channel_3); |
AnalogData.Ch4 = ADC_GetConversionValue(ADC_Channel_4); |
AnalogData.Ch5 = ADC_GetConversionValue(ADC_Channel_5); |
AnalogData.Ch6 = ADC_GetConversionValue(ADC_Channel_6); |
AnalogData.Ch7 = ADC_GetConversionValue(ADC_Channel_7); |
} |
IDISABLE; |
} |
|
void Analog_Init(void) |
{ |
ADC_InitTypeDef ADC_InitStructure; |
|
UART1_PutString("\r\n ADC init..."); |
|
SCU_APBPeriphClockConfig(__GPIO4, ENABLE); // Enable the GPIO4 Clock |
|
ADC_DeInit(); // reset register to default values |
|
// configure port 4 pins as analog inputs |
GPIO_ANAPinConfig(GPIO_ANAChannel1, ENABLE); |
GPIO_ANAPinConfig(GPIO_ANAChannel2, ENABLE); |
GPIO_ANAPinConfig(GPIO_ANAChannel3, ENABLE); |
GPIO_ANAPinConfig(GPIO_ANAChannel4, ENABLE); |
GPIO_ANAPinConfig(GPIO_ANAChannel5, ENABLE); |
GPIO_ANAPinConfig(GPIO_ANAChannel6, ENABLE); |
GPIO_ANAPinConfig(GPIO_ANAChannel7, ENABLE); |
|
ADC_Cmd(ENABLE); // power on the ADC |
ADC_StandbyModeCmd(DISABLE); // disable Standby Mode |
ADC_StructInit(&ADC_InitStructure); |
ADC_InitStructure.ADC_Channel_1_Mode = ADC_NoThreshold_Conversion; |
ADC_InitStructure.ADC_Channel_2_Mode = ADC_NoThreshold_Conversion; |
ADC_InitStructure.ADC_Channel_3_Mode = ADC_NoThreshold_Conversion; |
ADC_InitStructure.ADC_Channel_4_Mode = ADC_NoThreshold_Conversion; |
ADC_InitStructure.ADC_Channel_5_Mode = ADC_NoThreshold_Conversion; |
ADC_InitStructure.ADC_Channel_6_Mode = ADC_NoThreshold_Conversion; |
ADC_InitStructure.ADC_Channel_7_Mode = ADC_NoThreshold_Conversion; |
ADC_InitStructure.ADC_Select_Channel = ADC_Channel_1; |
ADC_InitStructure.ADC_Scan_Mode = ENABLE; // convert all selected channels |
ADC_InitStructure.ADC_Conversion_Mode = ADC_Single_Mode; |
ADC_Init(&ADC_InitStructure); |
|
ADC_PrescalerConfig(255); // PCLK/255 (24MHz/255 = 94.1kHZ ) |
ADC_ITConfig(ADC_IT_ECV, ENABLE); // enable end of conversion IRQ |
|
VIC_Config(ADC_ITLine, VIC_IRQ, PRIORITY_ADC); |
VIC_ITCmd(ADC_ITLine, ENABLE); |
|
UART1_PutString("ok"); |
} |
|
void Analog_Deinit(void) |
{ |
VIC_ITCmd(ADC_ITLine, DISABLE); |
ADC_ConversionCmd(ADC_Conversion_Stop); |
ADC_ITConfig(ADC_IT_ECV, DISABLE); // disable end of conversion IRQ |
ADC_Cmd(DISABLE); // power down the ADC |
ADC_DeInit(); // reset register to default values |
} |
|
void Analog_Update(void) |
{ |
static u32 AnalogTimer = 0; |
|
if(CheckDelay(AnalogTimer)) |
{ |
AnalogTimer = SetDelay(25); |
ADC_ConversionCmd(ADC_Conversion_Start); |
} |
} |