0,0 → 1,259 |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Software Nutzungsbedingungen (english version: see below) |
// + www.MikroKopter.com |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + der Fa. HiSystems GmbH, Flachsmeerstrasse 2, 26802 Moormerland - nachfolgend Lizenzgeber genannt - |
// + Der Lizenzgeber räumt dem Kunden ein nicht-ausschließliches, zeitlich und räumlich* unbeschränktes Recht ein, die im den |
// + Mikrocontroller verwendete Firmware für die Hardware Flight-Ctrl, Navi-Ctrl, BL-Ctrl, MK3Mag & PC-Programm MikroKopter-Tool |
// + - nachfolgend Software genannt - nur für private Zwecke zu nutzen. |
// + Der Einsatz dieser Software ist nur auf oder mit Produkten des Lizenzgebers zulässig. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Die vom Lizenzgeber gelieferte Software ist urheberrechtlich geschützt. Alle Rechte an der Software sowie an sonstigen im |
// + Rahmen der Vertragsanbahnung und Vertragsdurchführung überlassenen Unterlagen stehen im Verhältnis der Vertragspartner ausschließlich dem Lizenzgeber zu. |
// + Die in der Software enthaltenen Copyright-Vermerke, Markenzeichen, andere Rechtsvorbehalte, Seriennummern sowie |
// + sonstige der Programmidentifikation dienenden Merkmale dürfen vom Kunden nicht verändert oder unkenntlich gemacht werden. |
// + Der Kunde trifft angemessene Vorkehrungen für den sicheren Einsatz der Software. Er wird die Software gründlich auf deren |
// + Verwendbarkeit zu dem von ihm beabsichtigten Zweck testen, bevor er diese operativ einsetzt. |
// + Die Haftung des Lizenzgebers wird - soweit gesetzlich zulässig - begrenzt in Höhe des typischen und vorhersehbaren |
// + Schadens. Die gesetzliche Haftung bei Personenschäden und nach dem Produkthaftungsgesetz bleibt unberührt. Dem Lizenzgeber steht jedoch der Einwand |
// + des Mitverschuldens offen. |
// + Der Kunde trifft angemessene Vorkehrungen für den Fall, dass die Software ganz oder teilweise nicht ordnungsgemäß arbeitet. |
// + Er wird die Software gründlich auf deren Verwendbarkeit zu dem von ihm beabsichtigten Zweck testen, bevor er diese operativ einsetzt. |
// + Der Kunde wird er seine Daten vor Einsatz der Software nach dem Stand der Technik sichern. |
// + Der Kunde ist darüber unterrichtet, dass der Lizenzgeber seine Daten im zur Vertragsdurchführung erforderlichen Umfang |
// + und auf Grundlage der Datenschutzvorschriften erhebt, speichert, verarbeitet und, sofern notwendig, an Dritte übermittelt. |
// + *) Die räumliche Nutzung bezieht sich nur auf den Einsatzort, nicht auf die Reichweite der programmierten Software. |
// + #### ENDE DER NUTZUNGSBEDINGUNGEN ####' |
// + Hinweis: Informationen über erweiterte Nutzungsrechte (wie z.B. Nutzung für nicht-private Zwecke) sind auf Anfrage per Email an info(@)hisystems.de verfügbar. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + Software LICENSING TERMS |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
// + of HiSystems GmbH, Flachsmeerstrasse 2, 26802 Moormerland, Germany - the Licensor - |
// + The Licensor grants the customer a non-exclusive license to use the microcontroller firmware of the Flight-Ctrl, Navi-Ctrl, BL-Ctrl, and MK3Mag hardware |
// + (the Software) exclusively for private purposes. The License is unrestricted with respect to time and territory*. |
// + The Software may only be used with the Licensor's products. |
// + The Software provided by the Licensor is protected by copyright. With respect to the relationship between the parties to this |
// + agreement, all rights pertaining to the Software and other documents provided during the preparation and execution of this |
// + agreement shall be the property of the Licensor. |
// + The information contained in the Software copyright notices, trademarks, other legal reservations, serial numbers and other |
// + features that can be used to identify the program may not be altered or defaced by the customer. |
// + The customer shall be responsible for taking reasonable precautions |
// + for the safe use of the Software. The customer shall test the Software thoroughly regarding its suitability for the |
// + intended purpose before implementing it for actual operation. The Licensor's liability shall be limited to the extent of typical and |
// + foreseeable damage to the extent permitted by law, notwithstanding statutory liability for bodily injury and product |
// + liability. However, the Licensor shall be entitled to the defense of contributory negligence. |
// + The customer will take adequate precautions in the case, that the software is not working properly. The customer will test |
// + the software for his purpose before any operational usage. The customer will backup his data before using the software. |
// + The customer understands that the Licensor collects, stores and processes, and, where required, forwards, customer data |
// + to third parties to the extent necessary for executing the agreement, subject to applicable data protection and privacy regulations. |
// + *) The territory aspect only refers to the place where the Software is used, not its programmed range. |
// + #### END OF LICENSING TERMS #### |
// + Note: For information on license extensions (e.g. commercial use), please contact us at info(@)hisystems.de. |
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
#include "jetimenu.h" |
#include "libfc.h" |
#include "printf_P.h" |
#include "main.h" |
#include "spi.h" |
#include "capacity.h" |
#include "hottmenu.h" |
|
#define JETIBOX_KEY_RIGHT 0x1F |
#define JETIBOX_KEY_UP 0x2F |
#define JETIBOX_KEY_DOWN 0x4F |
#define JETIBOX_KEY_LEFT 0x8F |
#define JETIBOX_KEY_NONE 0x0F |
#define JETIBOX_KEY_UNDEF 0x00 |
|
#define JetiBox_printfxy(x,y,format, args...) { LIBFC_JetiBox_SetPos(y * 16 + x); _printf_P(&LIBFC_JetiBox_Putchar, PSTR(format) , ## args);} |
#define JetiBox_printf(format, args...) { _printf_P(&LIBFC_JetiBox_Putchar, PSTR(format) , ## args);} |
|
// ----------------------------------------------------------- |
// the menu functions |
// ----------------------------------------------------------- |
void Menu_Status(uint8_t key) |
{ //0123456789ABCDEF |
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP) |
JetiBox_printfxy(0,0,"%2i.%1iV",UBat/10, UBat%10); |
if(NaviDataOkay) |
{ |
JetiBox_printfxy(6,0,"%3d%c %03dm%c",ErsatzKompassInGrad, 0xDF, GPSInfo.HomeDistance/10,NC_GPS_ModeCharacter); |
} |
else |
{ |
JetiBox_printfxy(6,0,"Status"); |
} |
|
#if (defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)) |
if(NC_ErrorCode) |
{ |
static unsigned int timer; |
static char toggle = 1; |
|
if(CheckDelay(timer)) { if(toggle) toggle = 0; else toggle = 1; timer = SetDelay(1500);}; |
if(toggle) |
{ |
LIBFC_JetiBox_SetPos(0); |
_printf_P(&LIBFC_JetiBox_Putchar, NC_ERROR_TEXT[NC_ErrorCode] , 0); |
} |
else |
{ |
JetiBox_printfxy(6,0,"ERROR: %2d ",NC_ErrorCode); |
if(MotorenEin) JetiBeep = 'O'; |
} |
} |
#else |
if(NC_ErrorCode) { JetiBox_printfxy(6,0,"ERROR: %2d ",NC_ErrorCode); if(MotorenEin) JetiBeep = 'O';}; |
#endif |
JetiBox_printfxy(0,1,"%4i %2i:%02i",Capacity.UsedCapacity,FlugSekunden/60,FlugSekunden%60); |
if(Parameter_GlobalConfig & CFG_HOEHENREGELUNG) |
{ |
JetiBox_printfxy(10,1,"%4im%c", (int16_t)(HoehenWert/100),VarioCharacter); |
} |
#endif |
} |
|
|
void Menu_Temperature(uint8_t key) |
{ //0123456789ABCDEF |
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP) |
JetiBox_printfxy(0,0,"%3i %3i %3i %3i", Motor[0].Temperature, Motor[1].Temperature, Motor[2].Temperature, Motor[3].Temperature); |
JetiBox_printfxy(0,1,"%3i %3i %3i %3i", Motor[4].Temperature, Motor[5].Temperature, Motor[6].Temperature, Motor[7].Temperature); |
if(RequiredMotors <= 4) |
{ |
JetiBox_printfxy(0,1,"Temperatures "); |
} |
else |
if(RequiredMotors <= 6) |
{ |
JetiBox_printfxy(8,1,"\%cC ",0xdf); |
} |
|
#endif |
} |
|
void Menu_Battery(uint8_t key) |
{ //0123456789ABCDEF |
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP) |
JetiBox_printfxy(0,0,"%2i.%1iV %3i.%1iA", UBat/10, UBat%10, Capacity.ActualCurrent/10, Capacity.ActualCurrent%10); |
JetiBox_printfxy(0,1,"%4iW %6imAh",Capacity.ActualPower, Capacity.UsedCapacity); |
#endif |
} |
|
void Magnet_Values(uint8_t key) |
{ //0123456789ABCDEF |
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP) |
JetiBox_printfxy(0,0,"Magnet:%3i%% %3i%c",EarthMagneticField, KompassValue,0xDF); |
JetiBox_printfxy(0,1,"Incli.:%3i%c (%i) ",EarthMagneticInclination, 0xDF,EarthMagneticInclinationTheoretic); |
#endif |
} |
|
|
void Menu_PosInfo(uint8_t key) |
{ |
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP) |
if(NaviDataOkay) |
{ |
JetiBox_printfxy(0,0,"%2um/s Sat:%d ",GPSInfo.Speed,GPSInfo.NumOfSats); |
switch (GPSInfo.SatFix) |
{ |
case SATFIX_3D: |
JetiBox_printfxy(12,0," 3D"); |
break; |
// case SATFIX_2D: |
// case SATFIX_NONE: |
default: |
JetiBox_printfxy(12,0,"NoFx"); |
break; |
} |
if(GPSInfo.Flags & FLAG_DIFFSOLN) |
{ |
JetiBox_printfxy(12,0,"DGPS"); |
} |
JetiBox_printfxy(0,1,"Home:%3dm %3d%c %c", GPSInfo.HomeDistance/10, GPSInfo.HomeBearing, 0xDF,NC_GPS_ModeCharacter); |
} |
else |
{ //0123456789ABCDEF |
JetiBox_printfxy(2,0,"No NaviCtrl!"); |
} |
#endif |
} |
|
|
// ----------------------------------------------------------- |
// the menu topology |
// ----------------------------------------------------------- |
typedef void (*pFctMenu) (uint8_t); // the menu item handler function pointer |
|
typedef struct{ |
int8_t left; |
int8_t right; |
int8_t up; |
int8_t down; |
pFctMenu pHandler; |
} MENU_ENTRY; |
|
|
// the menu navigation structure |
/* | |
|
3 - 0 - 1 - 2 - 3 - 0 |
|
*/ |
|
const MENU_ENTRY JetiBox_Menu[] PROGMEM= |
{ // l r u d pHandler |
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP) |
{4, 1, 0, 0, &Menu_Status }, // 0 |
{0, 2, 1, 1, &Menu_Temperature }, // 1 |
{1, 3, 2, 2, &Menu_Battery }, // 2 |
{2, 4, 3, 3, &Menu_PosInfo }, // 3 |
{3, 0, 4, 4, &Magnet_Values } // 4 |
#endif |
}; |
|
// ----------------------------------------------------------- |
// Update display buffer |
// ----------------------------------------------------------- |
unsigned char JetiBox_Update(unsigned char key) |
{ |
#if !defined (RECEIVER_SPEKTRUM_DX7EXP) && !defined (RECEIVER_SPEKTRUM_DX8EXP) |
static uint8_t item = 0, last_item = 0; // the menu item |
static uint8_t updateDelay = 1; |
|
// navigate within the menu by key action |
last_item = item; |
switch(key) |
{ |
case JETIBOX_KEY_LEFT: |
//if (item == 0) return (1); // switch back to jeti expander menu |
// else |
item = pgm_read_byte(&JetiBox_Menu[item].left); //trigger to left menu item |
break; |
case JETIBOX_KEY_RIGHT: |
item = pgm_read_byte(&JetiBox_Menu[item].right); //trigger to right menu item |
break; |
case JETIBOX_KEY_UP: |
item = pgm_read_byte(&JetiBox_Menu[item].up); //trigger to up menu item |
break; |
case JETIBOX_KEY_DOWN: |
item = pgm_read_byte(&JetiBox_Menu[item].down); //trigger to down menu item |
break; |
default: |
break; |
} |
// if the menu item has been changed, do not pass the key to the item handler |
// to avoid jumping over to items |
if(item != last_item) key = JETIBOX_KEY_UNDEF; |
|
if (updateDelay++ & 0x01) |
{ |
|
LIBFC_JetiBox_Clear(); |
//execute menu item handler |
((pFctMenu)(pgm_read_word(&(JetiBox_Menu[item].pHandler))))(key); |
} |
#endif |
return (0); |
} |
|